Used Cooling Room for sale (8,905)

Condition: used, Year of construction: 1985, machine/vehicle number: 294, x-travel:400 mm y-travel:190 mm z-travel:310 mm table clamping surface:280 x 750 mm Reach of the vertical spindle:115-575 mm feed steps:16 feed range:11,2-355 mm/min Ihjdpfxjvcf Hpj Addjt tool taper:SK 40 speed steps :16 speeds::56-1800 min-1 total power requirement:2,2 kW dimensions of the machine ca.:1550 x 1250 x 2000 mm weight of the machine ca.:1200 kg

Condition: used, New: No Ijdsxxydkopfx Addeht Contact Jos Rietveld for further information.

Condition: used, maximum load weight: 14,280 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 02/2011, loading space length: 7,100 mm, loading space width: 2,500 mm, loading space height: 2,850 mm, total width: 2,600 mm, total height: 4,000 mm, Year of construction: 2011, Listed prices are exclusive of BPM (Dutch vehicle registration tax) and apply exclusively for export. Iedpexwtapofx Addsht

Condition: used, Cooling unit DWM Copeland -Compressor type: D6DJ5-4000-EWM/D -Volume: 126.9 m3/h -Cooling capacity: 88.5 kW at -5°C/40°C, 73.4 kW at -10°C/40°C, 49.1 kW at -20°C/40°C -Dimensions: 1950 x 1000 x 1870 mm -Number of fans: 6 x 400 mm -Stock number: AG 220 -Quantity in stock: 1 Iodpfxsx Tt Izs Addjht -Condition: used in very good condition, ready to work

Condition: used, Cooling unit Bitzer -Compressor type: 4JE-22Y-40P -Volume: 63.5 m3/h -Cooling capacity: 43.4 kW at -5°C/40°C, 35.5 kW at -10°C/40°C, 17.8 kW at -25°C/40°C -Dimensions: 1950 x 1000 x 1870 mm -Number of fans: 6 x 400 mm Ijdpfx Adsx Tt E Hjdjht -Stock number: AG 221 -Quantity in stock: 1 -Condition: used in very good condition, ready to work

Condition: used, Cooling unit Bitzer -Compressor type: 4HE-25Y-40P -Volume: 73.7 m3/h Ihodpex Ttm Rofx Addst -Cooling capacity: 51 kW at -5°C/40°C, 41.9 kW at -10°C/40°C, 21.4 kW at -25°C/40°C -Dimensions: 2450 x 1000 x 1870 mm -Number of fans: 8 x 400 mm -Stock number: AG 222 -Quantity in stock: 1 -Condition: used in very good condition, ready to work

Condition: new, Year of construction: 2023, Buhler Cooling Die Polycool 1000, designed for meat analogues. New in box. Ihsdpfx Ajxw Ebfeddot

Condition: used, Year of construction: 2011, Used Frozen Orange Processing Line Iedpsx H Tcxefx Addoht The Frozen Orange Processing Line by Navatta Group is an industrial processing solution engineered for handling frozen citrus products with high reliability and safety. Built in 2011 and configured under model QE11056, this second hand line is suitable for integration within beverage production and industrial packaging environments where pre-processing of fruit inputs is required. Designed for continuous-duty operation, it provides robust automation, comprehensive operator protections, and compliance with stringent European safety standards. Its electrical and control architecture supports stable performance and straightforward integration into a complete used bottling line or broader food and beverage processing workflow. Manufactured by Navatta Group engineering, the line is tailored for frozen orange processing applications, with the flexibility to interface with downstream equipment such as filling, labeling, capping, and packaging machines. It is an optimal choice for producers seeking dependable performance in industrial packaging contexts, enabling efficient preparation of fruit-based inputs for further transformation within beverage production lines. Technical Specifications & Performance Data Manufacturer: Navatta Group Model: QE11056 Year: 2011 Primary voltage: 400 V Auxiliary voltage: 24 V Frequency: 50 Hz Installed power (absorbed): 47 kW Maximum current: 93.1 A Short-circuit current rating (Icc): 40 kA Line type: Frozen orange processing line Advanced Automation & Control Systems The line features a dedicated electrical panel with clearly identified electrical characteristics and operator controls. Automation is supported by integrated control and safety logic designed to minimize risk and streamline operation. The system provides: Operator control panel with descriptive indicators and alarms Structured safety devices and interlocks for guarded operation 24 V auxiliary control circuits for reliable low-voltage signaling Industrial-grade electrical build complying with EN 60204-1 Designed for quick parameter adjustments during format or process changes Production Line Integration Capabilities This line is engineered to be positioned inline with upstream and downstream equipment. It can operate as part of a broader used bottling line or food processing cell, supporting material handling and transfer to filling, labeling, capping, and packaging stations. Integration features include: Inline positioning with conveyor and utility connection readiness Compatibility with industrial packaging workflows Process parameters adjustable for product handling requirements Suitable as a pre-processing stage in beverage production environments Machine Condition & Maintenance History The equipment is supported by a comprehensive user and maintenance manual, including electrical schematics and functional specifications.

Condition: good (used), Swegon Teal 16.2ST 2PS air cooler water chiller Refrigerant R401A Iodjqqhrhspfx Addeht

Year of construction: 2012, condition: ready for operation (used), A continuous cooling line/band cooling section Pennekamp is available. Belt width: 4500mm, pass-through height: 400mm, zones: 7, total length: approx. 23750mm. Some control components have been removed. Documentation available. An on-site inspection is possible. Ihodox E Acfopfx Addst

Year of construction: 2004, condition: ready for operation (used), A continuous Pennekamp cooling line/belt cooling section is available. Belt width: 3800mm, pass through height: 400mm, zones: 8, burner: Pennekamp. Includes a partially existing spray system with mixing tank. Some control components have been removed. Documentation available. An on site inspection is possible. Ihodox E Aclepfx Addjt

Condition: ready for operation (used), 844 USED stainless steel trolleys for 24 levels, shelf dimensions 58x98 cm. EXTERNAL DIMENSIONS (in cm): Ijdpfx Asualn Neddsht - W: 58, - L: 98. TECHNICAL DATA: - number of levels: 24. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Year of construction: 1995, condition: used, Cooling coil for sale due to no longer being needed. Ihodpfex Iu S Dox Addjt

Condition: used, Year of construction: 2006, x-travel 560 mm Ihsdpfxoxfb Hto Addst y-travel 300 mm z-travel 420 mm table-size 1055 x 240 mm spindle taper ISO Sk 40 spindle turning speed range 40 - 1550 U/min total power requirement 5,5 kW weight of the machine ca. 1,3 t dimensions 1,6 x 1,5 x 1,85 m Universal milling machine - Digital display - Chip guard - Coolant system - Machine light - Chip tray

Condition: as good as new (ex-display), Demonstration machine Hans Schreiner metal band saw with swivel arm, for the professional, with gentle hydraulics for the right cutting pressure, electric coolant system, for all metals, steels and stainless steel, quick-release vice, automatic cutting shutdown, base frame, CE-compliant - exhibition machine! Ihjdpfsvrvuvox Addjt Technical data: Motor output 1500 W S, roller diameter 300 mm, saw blade dimensions 2450 x 27 x 0.9 mm, max. cutting range 90° 260 x 140 mm, max. cutting range 30° 200 x 140 mm, max. cutting range 45° 160 x 140 mm, max. cutting range 60° 120 x 100 mm, cutting speed 37.5 / 75 m/min, weight 227 kg Symbolic photo Prices subject to change, errors, printing and typesetting errors reserved

Condition: new, Year of construction: 2025, functionality: fully functional, Universal cooling system designed for milling machines, band saws, drilling machines and lathes. A wide range of applications Possibility mounting with a o lot of devices Simple handling Silent and efficient electric motor Removable coarse filter Regulated elastic spout Technical parameters MOTOR POWER 25 W VOLTAGE 230 V PUMP EFFICIENCY 240 l/h TANK CAPACITY 13 l TUBE LENGHT 2,6 m CASE OF IP CLASS IP 44 DIMENSIONS 370x320x260 mm Ihsdpevuzwuofx Addst WEIGHT 7 kg

Condition: used, Year of construction: 1999, x-travel 600 mm y-travel 525 mm z-travel 500 mm table surface area 1000 x 543 mm spindle taper SK 40 Ihjdpfxstqqmhj Addst spindle taper DIN 69871 spindle turning speed - stepless 20 - 12.000 U/min feed X/Y/Z-axis 20 - 10.000 mm/min rapid traverse X/Y/Z axis 18 / 18 / 15 m/min table load max. 350 kg control HEIDENHAIN MillPlus milling-head swivable +/- 90 ° total power requirement 26 kVA weight of the machine ca. 4,2 t dimensions of machine L x W x H 2,95 x 2,1 x 2,26 m Accessories: various tool fixtures, coolant

Condition: new, ME-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from +45 ºC and above. EU-LINE - Air-Cooled Dehumidifiers are used for drying air of up to 100% relative humidity (RH) with temperatures from -30 ºC to +40 ºC. Rust is the adversary of freshly blasted steel; high air humidity combined with low steel temperatures creates ideal circumstances for moisture condensation onto the recently blasted surface. Condensation rust is a major cause of early coating failure. By lowering relative humidity, the Proton dehumidifiers are designed to give the best climatic conditions for blasting. Climate conditions across the world vary considerably from chilly and humid in Western Europe, warm and humid in the Far East, to hot and humid in the Middle East. Various types of technology can be employed in the dehumidification process; certain dehumidification technologies are more successful than others in dealing with specific climatic conditions. Each Proton dehumidifier is built to the highest quality standards and comes with regional certification. The heart of the humidifier is a very efficient and robust metal silicate rotor. The rotor contains a vast number of air channels, running parallel to the shaft, which ensures a large internal surface for adsorbing water vapour. The rotor is not affected by over saturation. Therefore, the PROTON dehumidifier’s rotor can resist long time storage at high humidity without loosing capacity. The PROTON dehumidifiers have been developed especially for corrossion protection in connection with sandblasting and painting operations to protect materials and to avoid moisture problems, meeting the following conditions: •Avaliable in sizes from 1.000m³/h to 18.000m³/h dry air. •Avaliable in pre-cooled and after-cooled versions for warm climates. •Robust design with steelframe, eyebolts etc. •Vital parts can easily be maintained and exchanged. •Large air inlet grills and filters. Ihedpfx Ajkw Ukujddot •Can be built into containers for protection. •Adjustable dehumidifying capacity and outlet air temperature in 4Grades. •Outdoor and indoor use. •Dry air pressure up to 1200 Pa. Technical. Spec.: Dehumidifiers differs between 1.000m3/h - 18.000m3/h.PROTON Dehumidifiers decrease the Relative Humidity (RH) from 90% to %10-15. Dehumidifiers are capable to remove 100lt water per hour.

Condition: new, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 8-10 weeks after receipt of payment! ✅Important note: If you would like to receive a quote for a blast cabinet, please use the blast cabinet configurator on the homepage of our website. ➖➖➖➖➖ ✳️Maintain your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ➖➖➖➖➖ ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ 💥 SR-LINE – Industrial blasting rooms for XXL applications 💥 🔧 Maximum performance, robust construction, sophisticated design! Whether railway wagons, construction machinery, aircraft, or military vehicles – with our SR-LINE blasting rooms, you can process even the largest and most complex workpieces reliably and efficiently! Our blasting rooms offer a safe, clean, and high-performance environment for every type of surface preparation – be it cleaning, roughening, or smoothing. _____ 🧩 Complete system with all essential components: ✅ Spacious main cabin with rubber lining to protect against wear ✅ Emergency exit doors with safety windows ✅ High-performance sandblasting pots in various sizes ✅ Pneumatic or mechanical abrasive recovery system ✅ Efficient dust collection system to maintain air quality ✅ Aftercooler, filter units, and robust steel construction ✅ Main control panel for centralized control ✅ Lighting system for perfect visibility in the room ✅ Optional: Overhead cranes, workpiece trolleys, wall-mounted multi-axis units for improved handling _____ ♻️ Economical & sustainable thanks to recovery system The used blasting abrasive is collected automatically or manually and returned to the cycle – saving resources made easy! _____ 🔒 Safety & comfort according to EU standards Our systems comply with applicable CE and safety standards and are equipped with optional sound insulation for a more pleasant working environment. 💨 Fresh air systems with fans or suction lines ensure optimal air supply during the blasting process. _____ 📦 What does the SR-LINE blasting system include? • Blasting cabinet • Workpiece entry door & operator door with panel • Interior lighting & rubber lining • Blasting pot & abrasive container • Recirculation system with scraper blades • Dust filter & aftercooler • Hoses, lines & main control panel • Robust support structure ⚠️ Compressor and compressed air tank must be purchased separately. A suitable air duct is recommended. _____ 🚀 Why SR-LINE? ✔️ Customized planning for your application ✔️ Extremely durable materials & components ✔️ Designed for high performance and continuous operation ✔️ Made by PROTON Maschinenbau GmbH – 40 years of experience _____ 📞 Contact us now for a customized quote – we'll be happy to advise you! 🛠️ SR-LINE – Your solution for large-format blasting technology. ☀️ 2-YEAR WARRANTY ☀️ Ihjdjghawmspfx Addet ☀️ We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: new, Product description: ROOMLINE powder coating booths are designed for paint recycling and prevention of environmental pollution during the powder coating process of large parts. It works on the principle of manual painting of products suspended on a rail or placed on a trolley.It is integrated into manual painting systems. Suitable for bar transfer systems. There are options to bring the products into the cabin with the trolley hanging above or on a bottom trolley. The cabin floor is left as the factory floor according to the demand, or the cabin is placed on a chassis and floor suction is provided. Available in floor, side wall or rear wall suction versions.The front of the cabin is optionally produced with a door or open. Depending on occupational safety and European standards, it can be equipped with equipment such as emergency exit door, fire extinguishing system, camera monitoring, ex-proof lighting and suction system, inverter motors. Cabinet construction consists of sandwich panels and steel structures in various thicknesses according to the project. Attachable Dust Collection Systems: - Jet-Pulse Filter System - Mono Cyclone - Multi Cyclone Ijdpfx Asggyigoddoht Advantages: - Easy to Use - Quick Color Change - Easy assembly and disassembly - Cleaner environment

Condition: good (used), functionality: fully functional, X = 400 mm, Y = 300 mm Infinitely variable feed rates, Isdpfjx Hqufox Addoht Speeds stepped from 35 to 2200 rpm Spindle mount ISO 40 • Milling head with boring quill • Universal rotary and tilting table

Condition: used, Air condenser from an ammonia refrigeration system with a maximum output of 180 kW. Additional title: radiator Ihjdoxzqtuspfx Addot Performance per fan: 2 kw Position: to be installed outdoors on site Base construction: Housing with fans and coolers Features: 3 fans, Alpine main switch

Year of construction: 2013, condition: excellent (used), Vacuum Cooling Machine Make: Aston Foods Model: Nereus 1400 Ijdpfswrr E Nex Addoht Built 2013 Complete with Busch Vacuum Pump Complete with control panel No trolley Ideal machine for cooling bakery products

Condition: used, tank capacity: 490 l, GENERAL Equipment: lifting lugs Design: vertical Remarks: Fill pipe inside the vessel (see pictures); GEMÜ diaphragm valve at the outlet Internal diameter: 790 mm Total height: 2,300 mm Heating/cooling: available Insulation: available Max. permissible operating temperature: 130 °C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 3.0 bar Support type: mobile on castors Location: Bremen Technical documentation: drawing Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 490 litres Double jacket volume: 90.0 litres Double jacket material: V2A 1.4301 (AISI304) Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 745 mm Last application: pharmaceutical industry VESSEL Max. operating temperature vessel / °C: 130 °C Ends: dished ends HEATING/COOLING JACKET Ihedpfxexqc Eho Addot Max. permissible negative pressure double jacket / pipe space / bar: 1.0 bar Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation material: mineral wool Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: in top end (DN 400) Outlet: DN25 DIN 11851

Condition: good (used), Year of construction: 1981, Cover FP1 Active with 3 axes Heidenhain digital readout , 2 axes Active , rigid table , SK 40 S20x2 spindle holder. Good working condition, ready for demonstration under power by arrangement. Ihsdpfxsuvgnqj Addet