Used Cooling Tower for sale (8,123)

Year of construction: 2024, operating hours: 2 h, condition: new, functionality: fully functional, For sale is an as-new spiral cooling tower made of stainless steel 304. As a precautionary measure, the basket was completely shot-blasted, and every single stainless steel component was pickled and then hand-polished. All screws and nuts have been replaced with new ones, all shafts have been replaced with stainless steel, and all ball bearings have also been replaced with stainless steel deep groove ball bearings. Replacement motors (drive for the basket and for the modular belt), as well as approximately 20 meters of modular belt, are included as spares. Total modular belt width: approx. 340 mm, blue area width approx. 280 mm, outer side areas on the right and left made of stainless steel. Nedpfsyvrvpjx Aazodb Total belt length: 100 m. Number of tiers: 9. Spacing between each tier: 105 mm. Overall tower height: 2060 mm. Overall length incl. discharge belt: approx. 4000 mm; discharge section: approx. 2000 mm; total width: 2235 mm; running surface inner width: 370 mm; running surface outer width: 465 mm. Modular belt is made of stainless steel and POM. This spiral cooling tower also comes with a Z-belt. The Z-belt shown is for reference only and is not the original.

Year of construction: 2022, condition: like new (used), functionality: fully functional, Description: Nodpfx Aevzw H Ejazjdb JACIR Water Cooling Tower RXH-6029-84-N245-370-BR Characteristics: Thermal power: 4610 kW Incoming temperature: 43 °C Outgoing temperature: 30 °C dBa (20 m): 55 Max. H2O flow: 305 m3/hour

Year of construction: 2002, condition: ready for operation (used), Cooling capacity: 850kW, motor power: 2.7kW/15.5kW, motor type: M 3AA 160L, speed: 735rpm/1460rpm, water temperature outlet: 48°C, ambient air temperature: 40°C, material: stainless steel, weight: approx. 3000kg. Documentation available. On-site inspection is possible. Njdpfxsui R Sms Aazsdb

Year of construction: 2019, condition: ready for operation (used), An Evapco cooling tower is available. Fan power: 11kW, Fan type: axial, Fan diameter: 84 inches, Fan material: aluminium, Fan shaft: heavy-duty design, Drive system: Powerband belt drive with Taper-Lock pulley, Maintenance access: galvanized steel doors, Water treatment: integrated droplet separator, Motor hours: 12471h. Documentation available. On-site inspection is possible. Nedpfxev E Rago Aazsdb

Year of construction: 2001, condition: ready for operation (used), Built in 2001 Nodpfx Aaod Ert Sszodb Belt width 400 mm External diameter 2.250 mm Length conveyor belt 48 m Equipment • drying tower downward • infeed left at the top

Year of construction: 2014, condition: good (used), functionality: fully functional, machine/vehicle number: 14-674681, Used Evapco ATW 360-4M cooling tower for glycol, built in 2014. Complete with 2 belt-driven fans producing an air flow of 344,880 m³/h and a water pump with a water flow of 468 m³/h. The cooling tower operated with a York TDSH 283L water-cooled chiller rated at 2,680 kW under the following conditions: Njdpfx Ajxz Ex Seazodb Temperatures: -6.7 °C/+35 °C. Speed: 2,950 rpm Refrigerant type: R507. Feel free to contact us for more information!

Condition: good (used), BAC S1500E Cooling Tower The BAC S15E 1018-10-LE is a high-performance open cooling tower from the S1500E series by Baltimore Aircoil Company (BAC). This specific model is designed for industrial cooling applications and large HVAC systems where high efficiency and ease of maintenance are top priorities. Nodpfx Aaeynkbmozedb Technology Patented BACross III fill system, which allows for easy inspection of the fill sheets to prevent biological growth (e.g., Legionella). Key Features of the S1500E Series Maintenance Access: A large, inward-swinging access door and internal maintenance platforms allow technicians to comfortably perform inspections while standing inside the unit. Hygiene Control: The design minimizes stagnant water and, thanks to special air inlet louvers, provides protection against sunlight, thereby reducing algae growth. Flexibility: Due to the single-sided air inlet, the cooling tower can be installed even in confined spaces or positioned directly against walls. Materials: Galvanized steel with Baltibond hybrid coating. Typical Applications Industrial Cooling: Used in factories for process cooling. HVAC: Deployed in large building complexes as part of the central cooling plant. Refrigeration: Serves as a condenser in commercial refrigeration circuits. Cooling Capacity An open evaporative cooling tower does not possess a single, fixed kW cooling capacity, as the actual performance depends entirely on thermodynamic ambient conditions and system temperatures. The model is designed for maximum flow rates of up to 198 liters per second. Under typical industrial or standard HVAC conditions, the nominal cooling capacity of this model ranges from approximately 1,200 kW to 2,100 kW. Why does cooling capacity vary? Wet-bulb temperature (ambient air): The cooler and drier the ambient air, the more water can evaporate, resulting in a higher cooling capacity. Water temperatures: Performance varies significantly depending on the incoming hot water temperature (e.g., 35 °C) and the outgoing cold water temperature (e.g., 29 °C). Air volume flow: According to BAC’s technical specifications, the S15E 1018-10 LE model actively moves 60.0 m³/s of air using three installed 11.0 kW fan motors. If this airflow volume is reduced via a variable frequency drive (e.g., during night operation or in winter), the cooling capacity decreases in a controlled manner. Approach: This represents the most critical thermodynamic limit. It describes the temperature difference between the desired cold water temperature and the prevailing wet-bulb temperature. The closer the cold water is required to be cooled to the wet-bulb temperature (i.e., a smaller approach), the lower the cooling capacity the tower can deliver. Technical Specifications: Fan & Air Data Airflow Rate: 60.0 m³/s (generated in suction mode) Fan Motors: 3x 11.0 kW (Axial fans) Technology: Integrated belt drive Water Flow Rate: 198 l/s Hydraulic Connections Water Inlet (Fluid Inlet): 1x DN 250 (Nominal Diameter ND 250 mm) Water Outlet (Fluid Outlet): 1x DN 300 (Nominal Diameter ND 300 mm) Fresh Water Connection (Make-up): 1x DN 40 (ND 40 mm) Overflow / Drain: DN 80 (ND 80 mm) / DN 50 (ND 50 mm)

Condition: good (used), Year of construction: 2010, HL Cooling HL155 Water chiller 2010, twin fan system, adjustable temperature controls, see plate for all spec, 3Ph Njdpfx Aaowxlmajzodb

Condition: used, Year of construction: 2017, We are offering for sale our modular sheet metal storage system, the BÖCKELT TOWER, which consists of a total of 98 cassettes. The system is designed for the organized storage of various sheet metal formats and can be inspected while powered up by appointment. Storage layout: Small format (SF): 18 cassettes Medium format (MF): 18 cassettes plus 8 additional cassettes Large format (LF): 54 cassettes in three grids Total: 98 cassettes The system includes storage management software with an interface for connecting to an ERP system. Storage locations outside the tower can also be managed in the software. This storage system is suitable for sheet metal processing companies that want to manage their material stocks in an organized manner and store sheet metal of various formats in a space-saving way. Nedpfoz D U Uxex Aazodb Price: 59,000 € negotiable, net, ex works Leopoldshöhe. The exact scope of supply, software transfer, as well as disassembly and transport will be determined jointly before the contract is concluded. An inspection in the assembled state is possible by appointment.

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, Cooling system for recovering waste heat from machines Includes 6 heating fans. Nedpjzyc Diofx Aazsdb Details available upon request.

Condition: good (used), tank capacity: 14,500 l, total width: 2,150 mm, total height: 6,200 mm, Equipment: cooling unit, 14500l stainless steel tank with cooling Height: 6200 mm Diameter: 2150 mm Operating pressure: 0.0 bar internal, 1.0 bar cooling jacket Material: Stainless steel 1.4301 (AISI 304) Design: Cylindrical, upright, on a central plinth; DN 40 outlet; top manway; CIP with RLV line; 3 cooling zones Previous application: Beer 3 units available Ndodpfjzzxhasx Aazeb Each tank has been leak-tested A 12-month warranty is provided for each tank.

Year of construction: 2014, condition: like new (used), COOLING (DEEP FREEZING) HORIZONTAL TUNNEL (Instruction manual added) Liquid nitrogen deep-freezing of foodstuffs Model ZIP FREEZ SILVER LINE 2 type 90X12 Ndedpfx Ajyf Hlioazsb Overall dimension in m: Lengh 10,30 Width 2,30 Height 1,81 Height in cleaning position 2,31 Deep-freezing chamber Lengh 8,70 m Effective width 1,20 m Height 0,25 m Surface in m2 10,44 Weight 3200 kg Made by SEPAR, France Was used for cooling of the hot filled desserts In complete with Associated Controls, Conveyor and Pipework

Condition: used, Equipment: hydraulics, Product description Every high-rise project is different – and so is every building profile. Our custom-designed common tower is a fully modular system that is designed around the specific shape, dimensions, and logistics of your project. Whether the facade is recessed, curved, or changes profile at a certain height, the tower can be configured to follow the contours of the building, while the construction hoists themselves are installed quickly and in a conventional manner. By consolidating all vertical transport into a single, custom-designed structure, construction logistics become a streamlined process: a single central point for loading and unloading, fewer facade openings, and hoists that operate at full capacity throughout the construction period. Key benefits Centralized loading and unloading – all material and personnel flows via a single logistics point Reduced crane and hook time – the tower crane remains available for structural work Maximum hoist utilization – the hoists efficiently serve every floor from a single tower Minimal facade openings – small anchoring recesses keep the building envelope intact Increased safety – a controlled, protected transport route for people and goods at height Fully custom-designed – tailored to your building profile and construction schedule Faster completion, earlier weather-tightness A custom-designed common tower does more than just move materials. Thanks to a clever anchoring system, facade panels can be installed continuously around the tower, allowing floors to be closed and made weatherproof earlier. This means that finishing trades can start sooner – and your overall construction time is reduced. In combination with high-capacity personnel/goods hoists, the tower also enables the vertical transport of large loads, such as large facade elements and prefabricated units, up to complete bathroom modules. Modular extensions The system can be expanded with practical modules, tailored to your construction site: Loading docks – loading platforms at truck height, allowing goods to be transferred directly from truck to hoist without a forklift. This reduces handling and waiting times. Integrated stairs – safe, temporary staircases in the tower structure. Ideal as an additional escape route, with fewer anchor points and faster installation than traditional scaffolding stairs. Canopies / crash decks – tower components can be reused for protective decks that shield the area below from falling objects, or to create extra storage and working space – for example, above a public road. Ndedpfx Aaezmgdtszeb Designed for your project Our specialists design each common tower configuration in-house: from structural calculations and anchoring details to installation planning and logistics. The result: a vertical transport solution that fits your building like a glove and keeps your schedule on track, from shell construction to completion.

Condition: used, Year of construction: 2020, Sehr kompakt gebautes Wasserkühlgerät / Very compactly built Watercooled Chiller Kühlgerät / Chiller ef cooling Ernst H. Furrer EVO 60 Typ WKL 520 Wasserkühlgerät / Watercooled Chiller Baujahr / Year 2020 - Serial-No. 0520.008/36732 Kälteleistung / Cooling capacity 60kW Kondensationsleistung / Condensation performance 84kW Anzahl Kältekreisläufe 1 / Number of refrigeration circuits 1 Kältemittel je Kältekreislauf / Refrigerant per refrigeration circuit R410A, 4.4kg 2 Verdichter / Compressor Pumpe / Pump CM 10-5 Grundfos Wärmetauscher / Heat exchanger  Ndjdpfoxlkg Ajx Aazob Technische Dimensions: Length / Width / High 1800 x 850 x 2153mm Gewicht / Weight 640kgs Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: ready for operation (used), ef cooling LOK 30 air-oil cooler SN:0030, used, normal signs of wear, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Nedsul In Rjpfx Aazsdb

Condition: good (used), functionality: fully functional, Year of construction: 2013, load capacity: 200 kg, lifting height: 4,500 mm, platform length: 1,195 mm, platform width: 750 mm, overall weight: 485 kg, empty load weight: 285 kg, Power Towers Nano Vertical Manlift – Year of Manufacture 2013 – Used For sale is a used Power Towers Nano Vertical Manlift from the year 2013. This compact, self-propelled aerial work platform was specifically designed for work in confined indoor spaces and impresses with its high maneuverability, ease of operation, and low weight. It is ideal for maintenance, installation, electrical, painting, and renovation work. Technical Data: Manufacturer: Power Towers Model: Nano Vertical Manlift Year of Manufacture: 2013 Self-propelled Maximum working height: approx. 4.50 m Compact design – ideal for narrow passages and indoor areas Low weight – also suitable for sensitive floors The aerial work platform is in used, functional condition and shows the usual signs of wear and tear for its age. If you are interested or have any questions, please do not hesitate to contact us. An inspection can be arranged at any time by prior appointment. *Working Dimensions* - *Maximum working height*: 4.50 m - *Maximum platform height*: 2.50 m - *Platform dimensions*: 1.00 m x 0.73 m - *Footprint*: 1.19 m x 0.75 m - *Permissible load capacity*: 200 kg (1 person + tools) - *Max. manual force*: 200 N - *Max. slope during operation*: 0° - *Max. wind speed*: Only for indoor use, 0 mph - *Manual pushing force on level ground*: 9 kg - *Max. total weight including payload*: 485 kg - *Max. load at wheel contact point*: 180 kg (1.77 kN) - *Max. wheel force*: 1.75 kN *Dimensions in folded state* - *Length*: 1.195 m - *Width*: 0.750 m - *Height*: 1.560 m - *Weight*: 285 kg *Power Supply* - Standard 12V DC electric motor - Or 240V AC electric motor 13A connection Nodpfx Ajzmfrpjazjdb - Or 110V AC electric motor 16A connection *Battery Charger - Technical Data* - *Input voltage*: - Single voltage: 90-135V AC (UK) / 180-265V AC (outside UK) - Dual voltage: 90-265V AC - *Frequency*: 45-65 Hz - *Output*: 12V DC, 7A - *Sound power level*: Less than 70 dBA - *Emissions EN 55014N, EN 61000-3-2*

Condition: good (used), Screw cooling compressor ABB SVA 24, two units in complete YOM 1991 Made in Germany Nodpfxeyb Sdij Aazedb Good working condition

Condition: good (used), Cooling compressor Stal KTK 207 25-33 Bar Ndsdpfx Aaeyb Rquozeb YOM 1991 Good condition Dimensions (LxWxH): 4700x2200x1450 mm

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 0430.020 / 21143, type of input current: three-phase, power: 22.3 kW (30.32 HP), input current: 42 A, We are offering a refrigeration unit from ef cooling. This unit was used to cool a Bystronic laser cutting machine. Regular maintenance was always performed. The unit can also be used as a source of spare parts, so individual parts can also be purchased. Njdpfjzdytiox Aazjdb We have another identical unit in stock, so two of this type can be purchased.

Condition: good (used), functionality: fully functional, power: 26 kW (35.35 HP), tank capacity: 3,000 l, For sale is an Alco AMP 3000 V vacuum mixer with a cooling option! The system is offered including a base platform and a mobile loader for 200-liter meat containers! Ndedpfx Aszzpz Roazjb TECHNICAL DETAILS Two horizontal, parallel arranged mixing shafts Collision-free shaft geometry Product-specific shaft geometry for efficient and homogeneous mixing, even with sensitive products. Capacity: 3,000 liters Power: 26 kW Mixer dimensions Length: 3,700 mm Width: 1,700 mm Height: 2,900 mm Base platform dimensions Length: 2,100 mm Width: 800 mm Height: 2,400 mm Mobile loader dimensions Length: 1,450 mm Width: 1,300 mm Height: 3,400 mm EQUIPMENT Cooling option Base platform Mobile loader for 200-liter meat containers

Condition: excellent (used), We have 140 heavy duty stainless steel cooking racks available. Can be used for cooling or defrosting. Ndjdpfszi Em Sjx Aazeb Dimensions 1000mm x 800mm wire trays on 1200mm heavy duty frames. 7 shelves on each one.

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: WE173-000000006, total width: 1,350 mm, total length: 2,390 mm, total height: 1,980 mm, overall weight: 250 kg, pressure: 0.3 bar, Industrial HDPE 5000L process cooling tank, 3x 8" outlets either side Nsdsziazwepfx Aazedb Choice of 4, price per unit.

Condition: excellent (used), Year of construction: 2016, Seydelmann AMR1800/250 mixer grinder with CO2. 1800 litre hopper with 250mm head. Excellent condition, very high specification machine. New cost in excess of EUR 300,000 Ndsdpfx Aasx Alr Iszsb We also have many other (22) Seydelmann machines from the same factory, all bought at the same time. Please ask for details.

Year of construction: 2021, condition: excellent (used), 1 x Selmi cooling tunnel Belt width 600mm Belt length 12 meters. * Manufacturer: Selmi Chocolate Machinery * Model: TUN1200 * Year: 2021 * Voltage: 380V / 3 Phase / 50Hz Ndsdpfx Aaezz I Ntszeb * Serial No.: TUN1200001216 * Manufactured in Italy

Condition: used, all stainless steel Nedpoz Ep Ayjfx Aazjdb 3 tiers nett belt length ± 5.800 mm nett belt width ± 940 mm stainless steel mesh wire belt outside dimensions (l x w x h) : ± 7.200 x 1.400 x 2.900 mm + Evaporator "Goedhart B.V." Type LLK.s 411m² manufacturing number: PJV100282 Year of manufacture: 2010 Capacity: 135 dm³ Refrigerant: NH3 Weight: 770 kg, Working pressure: 22 bar Test pressure: 32 bar Overall dimensions including cooling panels and stainless steel door: 7.500 x 2.700 x 3.300 mm