Used Coolius 2700 for sale (1,024)

Condition: good (used), Year of construction: 2022, load capacity: 1,200 kg, fuel type: electric, empty load weight: 150 kg, - Electric pallet truck - Year of manufacture: 2022 - Brand: Still (Germany) - Very compact and lightweight (150 kg) - For use inside the truck Gkedpfsy R Aa Uox Akhod - Capacity: 1,200 kg - Internal charger

Condition: excellent (used), Year of construction: 2021, operating hours: 2,500 h, functionality: fully functional, overall weight: 1,100 kg, rotor diameter: 700 mm, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 3,400 rpm, power: 90 kW (122.37 HP), Equipment: rotational speed infinitely variable, This shredding machine is exceptional and highly innovative. The material to be processed is reduced to particles in 6 rows of small chambers, particle by particle, while simultaneously the particles are propelled against the grinding surface. The combination of these two effects results in a very fine grain size, and it is possible to dry the material during the shredding process. Keywords: turbo mill, impact mill, eddy current mill. Depending on the material, the machine can reduce the particle size to between 1000 µm and 5 µm. The throughput rate is between 100 and 900 kg/h, depending on the material. The possible applications range from minerals, industrial products, powder coatings, chemicals, and dyes to food and feed products. The innovations of the machine are: • the plug-in connections of the wear tools (always in the same position with minimal tolerances) • rotation in both directions – this ensures that the tools wear evenly on both sides • conical design – allows the cutting gap to be adjusted precisely to 0.1 mm with only 12 screws. Gkjdozl Shzjpfx Akhsd Technical data: • Drive power 90 kW – frequency converter (FU) is essential – frame size 90 kW with 150% overload for 60 seconds. • Speed up to 125 m/s • Tools: rotor and stator made of hard metal, available in different degrees of hardness; ceramic is also possible. • Machine monitoring via bearing temperature measurement and vibration measurement included. • Control cabinet is not included.

Condition: new, *IMMEDIATELY AVAILABLE* Incl.: Door/Ramp Combination Equipment: -Ramp rubber -Diamond plate pan -Ramp/Door Combination Net: €6,714.29 / Gross: €7,990.00 Article number: VTA227301610.12 Technical data: • Brand: Vezeko • Model: VT 2700 • Vehicle type: Livestock trailer • Vehicle condition: New vehicle • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 295 x 160 x 190 cm Gedpfx Aj Aickajkhekd • External dimensions (LxWxH): 451 x 214 x 256 cm • Loading height of the floor: 51 cm • Permissible total weight: 2,700 kg • Tare weight: 830 kg • Payload: 1,870 kg • Chassis: Low loader (wheels next to the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Aluminum diamond plate pan, flanged, welded onto screen-printed wood floor • Reinforced, stable, bolted V-drawbar • Very stable steel frame, welded • Frame completely hot-dip galvanized • Many crossmembers, resulting in high point load capacity • Aluminum walls, anodized, double-walled, 25mm • Tie-down possibility, with bar and 3 tie-down rings • Entry door on the right-hand side, facing forward, with 2 robust toggle fasteners • Solid, hot-dip galvanized, welded tarpaulin frame • Ventilation opening in the tarpaulin at the front, can be rolled up • Side struts for additional stability • Rear portal, continuously welded, hot-dip galvanized, in solid design • Aluminum diamond plate loading flap with integrated tread strips • Rear flap with flap - door combination • Tarpaulin at the rear completely closed over the rear flap, with tensioning straps • Non-slip rubber on the loading flap with integrated tread strips • Maintenance-free rubber spring axle from ALKO • Reversing aid • ALKO overrun device and parking brake • 13-pin connector • Reversing light • Large-sized safety lighting • Integrated rear fog light • Position lights mounted at the rear • Automatic support wheel in the middle _____ Accessories can be retrofitted by our specialist workshop! - Feel free to request any special requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or temporary registration plates (Germany) can be provided. - Export registration plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Door-ramp combination, divider grille Equipment: - All-aluminum body - Ramp rubber - Diamond-plate tray Gksdpfx Ako Aicu Ijhed Net: €8,399.16 / Gross: €9,995.00 Article number: VTA227321610.14 Technical data: • Brand: Vezeko • Model: VT 2700 • Vehicle type: Livestock trailer • Vehicle condition: New • First registration: Without first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (L x W x H): 320 x 160 x 190 cm • External dimensions (L x W x H): 464 x 205 x 247 cm • Loading height of the floor: 51 cm • Permissible total weight: 2,700 kg • Unladen weight: 825 kg • Payload: 1,875 kg • Chassis: Low-loader (wheels next to the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Aluminum diamond-plate tray, folded, welded onto a screen-printed wood floor • Reinforced, stable, bolted V-drawbar • Very stable steel frame, welded • Frame completely hot-dip galvanized • Numerous cross members, resulting in high point load capacity • Aluminum walls, anodized, double-walled, 25mm • Tie-down option with bar and 3 tie-down rings • Entry door on the right-hand side, with 2 robust angled lever locks • Solid, hot-dip galvanized, welded tarpaulin frame • Ventilation opening at the front • 2 side struts for additional stability • Ventilation opening, a pair, on the left and right sides, with grille on the inside • Rear portal, continuous welding, hot-dip galvanized, in a solid design • Rear door with flap-door combination • Interior light at the rear with switch • Tarpaulin at the rear, completely closed over the rear door, with tensioning straps • Non-slip rubber on the loading flap with integrated treads • Divider grille 1400mm, at the rear, pivoting aluminum • Maintenance-free rubber spring axle from ALKO • Reverse automatic system • ALKO over-run device and parking brake • 13-pin plug • Reversing light • Large-sized safety lighting • Integrated rear fog light • Rear marker lights mounted • Automatic support wheel, centrally located _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to inquire about specific requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transit plates (Germany) can be provided. - Export plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - a specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale are reserved -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Door/ramp combination, aluminum floor Equipment: - Aluminum floor - All-aluminum body - Ramp rubber Net price: €8,899.16 / Gross price: €10,590.00 Article number: VTA227321613.14 Technical data: Godps Aicvdefx Akhskd • Brand: Vezeko • Model: VT 2700 • Vehicle type: Livestock trailer • Vehicle condition: New • First registration: Without first registration • TÜV/HU (technical inspection): 2 years from first registration • Internal dimensions (L x W x H): 320 x 160 x 190 cm • External dimensions (L x W x H): 464 x 205 x 247 cm • Loading height of the floor: 51 cm • Permissible total weight: 2,700 kg • Unladen weight: 894 kg • Payload: 1,806 kg • Chassis: Low loader (wheels next to the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Aluminum diamond-plate floor, folded and welded to the all-aluminum floor (no more wood in the trailer) • Reinforced, stable, bolted V-drawbar • Very stable steel frame, welded • Frame completely hot-dip galvanized • Many cross members for high point load • Aluminum walls, anodized, double-walled, 25 mm • Tie-down option, with bar and 3 tie-down rings • Entry door on the right-hand side, with 2 robust toggle latches • Solid, hot-dip galvanized, welded tarpaulin frame • 2 side struts for additional stability • Ventilation opening, two pairs, on the left and right sides, with grilles on the inside • Rear portal, continuously welded, hot-dip galvanized, in a solid design • Rear flap with flap/door combination • Interior light at the rear with switch • Tarpaulin at the rear completely closed over the rear flap, with tensioning straps • Non-slip rubber on the loading flap with integrated treads • Maintenance-free rubber spring axle from ALKO • Reverse drive automatic • ALKO overrun device and parking brake • 13-pole plug • Reversing lights • Large-dimensioned safety lighting • Integrated rear fog light • Rear position lights mounted • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request special features! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export plates including customs declaration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years - Errors, omissions and prior sale exceptions excepted -

Condition: good (used), functionality: fully functional, load capacity: 270 kg, arm reach: 2,700 mm, controller manufacturer: kuka, controller model: krc4, teach pendant manufacturer: kuka, input voltage: 380 V, ROBOT ARM BRAND: KUKA MODEL: KR270 R2700 TECHNICAL DESCRIPTION PAYLOAD: 270 KG MAX. REACH: 2700 MM Gkodpfxj Akclus Akhed CONTROL UNIT: KRC4

Condition: used, Bosch Diffusion Welding Machine The system described here was designed for the following application: Diffusion welding machine for manufacturing the connection between the armature lead and the commutator for starter armatures using diffusion welding. Diffusion welding unit (also known as polymer diffusion welding unit, diffusion welding, copper soft-soldering unit, copper band welding unit), consisting of a main machine and control system, "PLC control, touchscreen operation". Process Description The workpiece carrier moves into the station and is lifted. The alignment gripper takes the armature from the workpiece carrier and aligns it to the welding position. The loading gripper takes over the armature and inserts it into the welding fixture. The welding fixture moves with the armature to the welding position. The contact and welding cylinder move together, and the first welding process begins. This process is repeated until the armature is completely welded. The welding fixture moves with the armature to the transfer position, and the unloading gripper takes over the armature and places it on the lifted workpiece carrier. The workpiece carrier is lowered. Workpiece carriers with I0 armatures continue on the belt system; I0 armatures are conveyed to the removal belt. Technical Data: Manufacturer: Gatek Designation: Diffusion Welding Machine Energy Data: Frequency: 50 Hz Rated power: approx. 11 kW Operating voltage: 400 V / 3P Control voltage: 24 V Rated current: 20 A Fuse: 35 A Water: Inlet 4 bar, 15-23 °C approx. 25 l/min Compressed air, oil-free: min. 5 bar Temperature: 1000 °C at the tungsten electrodes Machine dimensions without control cabinet Depth: 1800 mm Width: 3100 mm Height: 2700 mm Weight: 3000 kg Year of manufacture: 2016 Gjdpfx Aog Icfpjkhekd You can find more new and used items in our shop! International shipping costs on request!

Condition: not inspected (used), Year of construction: 2000, machine/vehicle number: 3244.00, total length: 2,700 mm, total width: 1,500 mm, total height: 2,000 mm, overall weight: 2,800 kg, DMT Kern CD 480 Lathe Technical data: Control: Heidenhain Manual Plus 3110 Working area: Swinging diameter over bed: 475 mm Swinging diameter over cross slide: 260 mm Cross slide travel: 260 mm Gedpfxo Af U Ice Akhskd Distance between centers: 1,000 mm Turning length: 880 mm Spindle stock: Spindle head DIN 55026: Size A6 Spindle diameter in the front bearing: 115 mm Spindle bore: 78 mm Standard chuck sizes: 200/250 mm Speed range (constant speed): 1–3,000 rpm Cross slide: Feed rate, facing: 0.001–1000 mm/rev Feed rate, longitudinal and threading: 0.001–2000 mm/rev Rapid traverse rate, facing/longitudinal: 5/10 m/min Tailstock: Arbor diameter: 70 mm Arbor travel: 120 mm Arbor taper: MK 5 Scope of supply: No further accessories included The center and the jaws in the chuck are not included in the scope of supply! Dimensions & weights: Installation dimensions L x W x H approx.: 2700 x 1500 x 2000 mm Weight approx.: 2800 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional notes: ►Upon request, we can offer transport to the desired location. ►The quoted price is net, plus VAT. ►The goods are sold with the exclusion of any warranty. ►Technical data is subject to change without notice. ►Subject to prior sale. ❗The sale of the goods is exclusively to business customers❗

Condition: used, Year of construction: 1989, MAKE GER, MADE IN SPAIN MODEL RS 10/60 YEAR TABLE LENGTH 1300.0 mm TABLE WIDTH 600.0 mm TRAVEL X AXIS: 1600.0 mm Y AXIS: 600.0 mm MAX DISTANCE (TABLE TO WHEEL) 800.0 mm MAX WORKPIECIE WEIGHT 1000 KGS GRINDING WHEEL SIZE 400.0 x 100.0 x 127.0 mm SPINDLE SPEED MAX 1500 RPM Gkjdpfx Asy Du N Uokhed MACHINE DIMENSIONS 4600.0 x 2700 x 2600.0 mm MACHINE WEIGHT 7600 KGS PLUS ELECTROMAGNETIC CHUCK SIZE: 1000.0 X 600.0MM HYDRAULIC PACK COOLANT SYSTEM WHEEL MOUNTED DRESSER

Condition: excellent (used), For panels measuring 5600 x 2600 (2700 mm), thickness from 2 mm to 60 mm N° 2 double-deck infeed roller conveyors, 1 x 6.000 mm long and 1 x approximately 3.800 mm long Hydraulic lifting table (5600 x 2700 mm ca.) System with rubber wheels (11 top + 11 bottom) for panel pressure/feeding Sliding bridge with 45 suction cups and 5 supports (for panel stack alignment) 1st Rear - Pusher, with 11 clamps Rotating table (90° panel rotation) with plastic wheels 1st Panel Saw AH8 580 - Max cutting width mm 5600 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 ( Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Sliding crosspiece with 7 pushers for cut panels With 4 supports (for panel stack alignment) and 3 motorized chains 2° Rear - pusher, with No. 25 (27) clamps/grippers 2nd Panel Saw - Max cutting width mm 2700 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Gkjdpsxvc N Djfx Akhjd Main Sawing Unit (max. diameter saw / power) mm 520 (Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Waste evacuation system with grinder VECOPLAN (Kw 55) Plastic wheels coated table for cut panel output Stacking system for cut panels with N° 2 front support tables with air blowing system 400 x 6300 mm + N° 8 lifting tables (4 are 1300 x 1600 mm and 4 are 1300 x 1410 mm) - Total power KVA 130

Condition: excellent (used), For panels measuring 5600 x 2600 (2700 mm), thickness from 2 mm to 60 mm N° 2 double-deck infeed roller conveyors, 1 x 6.000 mm long and 1 x approximately 3.800 mm long Hydraulic lifting table (5600 x 2700 mm ca.) System with rubber wheels (11 top + 11 bottom) for panel pressure/feeding Sliding bridge with 45 suction cups and 5 supports (for panel stack alignment) 1st Rear - Pusher, with 11 clamps Gkodpjxvc Rzefx Akhod Rotating table (90° panel rotation) with plastic wheels 1st Panel Saw AH8 580 - Max cutting width mm 5600 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 ( Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Sliding crosspiece with 7 pushers for cut panels With 4 supports (for panel stack alignment) and 3 motorized chains 2° Rear - pusher, with No. 25 (27) clamps/grippers 2nd Panel Saw - Max cutting width mm 2700 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 (Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Waste evacuation system with grinder VECOPLAN (Kw 55) Plastic wheels coated table for cut panel output Stacking system for cut panels with N° 2 front support tables with air blowing system 400 x 6300 mm + N° 8 lifting tables (4 are 1300 x 1600 mm and 4 are 1300 x 1410 mm) - Total power KVA 130

Condition: new, Longitudinal beam for pallet racking, SSI Schäfer PR 600 Pallet racking beam with a clear span of 2700 mm for three Euro pallets per beam pair, side by side. The beam can support a load of up to 1500 kg per beam pair. Godjwv Rvnepfx Akhekd Compatible with pallet racking system PR 600. For quick adjustment of your racking or easy replacement. The longitudinal beams guarantee a positive and secure connection with the racking uprights. With welded-on 5-hook hanging tabs. Height-adjustable in the system hole grid of 50:50 mm. As a replacement for damaged racking beams, as well as for expanding existing racking systems. Technical data: Manufacturer: SSI Schäfer Beam type: TRV1-270-084-30CE Beam length: 2700 mm Load capacity: 1500 kg per beam pair Height-adjustable at a distance of 50 mm 5-hook hanging tabs Material: Steel sheet Surface: Painted Color: Prussian blue RAL 5010 Profile: 80 x 40 mm Type: CE 80 Manufacturer order number: 334380 Scope of delivery: 1 x Longitudinal beam 2700 x 80 x 40 mm, blue Suitable for almost all pallet racks with a system hole grid of 50:50 mm e.g. Bito, Jungheinrich, Topregal, Meta, Lista, Dexion More racks in other sizes - new and used - can be found in our shop! International shipping costs available upon request!

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, load capacity: 270 kg, arm reach: 2,700 mm, controller manufacturer: KUKA, controller model: KRC4, The KUKA KR 270 R2700 prime is a 6-axis robotic arm with a payload capacity of 270 kg and a maximum reach of 2700 mm. It is commonly used in industrial applications such as palletizing, packaging, welding, pick&place applications. Payload: 270 kg Maximum reach: 2700 mm Mounting position: Floor Godpfx Aezp D Hqekhjkd Position repeatability (ISO 9283): 0.06 mm Controller: KR C4 Number of axes: 6 Condition: Used & Tested Shipment does not include the price. As PLC Merkezi EOOD, we have more than 500 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs.

Condition: used, Year of construction: 2001, functionality: fully functional, chucking diameter 250 mm greates pass round over bed 500 mm swing diameter over slide rest 290 mm centre distance 850 / 1350 mm control Heidenhain weight of the machine ca. 2700 t dimensions of the machine ca. 2900 x 1953 x 1825 m Gkjdpfow Syc Iox Akhed

Condition: like new (used), functionality: fully functional, conveyor belt length: 2,700 mm, conveyor belt width: 3,100 mm, total height: 2,500 mm, Length 270 cm Width 310 cm Height 250 cm Gedpfxexqgnmj Akhokd Carrier 3 cm With a large storage container

Condition: used, maximum load weight: 12,280 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 04/2004, next inspection (TÜV): 04/2027, loading space length: 7,860 mm, loading space width: 246 mm, loading space height: 2,060 mm, loading space volume: 40 m³, total length: 10,425 mm, total width: 2,550 mm, total height: 3,570 mm, Year of construction: 2004, Equipment: ABS, Keppler ZA18L – 2-axle beverage trailer – Swing-wall body – Forklift pocket – 18 tons VIN: WKH2ZA18L4A004895 Chassis / Components: * 2 BPW axles * Air suspension with H+S (raise and lower function) * Disc brakes * ABS * Tires: 385/65 R22.5 * Remaining tire tread: 1st axle 50/70%, 2nd axle 50/50% * ABS and 15-pin electrical connection * WABCO Duo-Matic brake connection * AL-KO support jacks with crank Gedpfe Akgamox Akhekd * Forklift pocket at the rear * Spare wheel holder on the side of the chassis * Wheel chock holder * LED work lights at the rear Body: * Keppler swing-wall beverage body * Internal dimensions (L x W x H): 7,860 x 2,462 x 2,059 mm * Load volume: approx. 39.8 m³ * Pallet stop on the right * Slotted rails in the floor and on the ceiling for securing the load * Mounting for vertical load securing bars for securing beverage pallets * Manufacturer's certificate according to VDI 2700 sheet 12 for beverage transport available Weights: * Permissible total weight: 18,000 kg * Unladen weight: 5,720 kg * Payload: 12,280 kg Other: * Manufacturer: Keppler * Type: ZA18L * First registration: 06.04.2004 * Color: Silver * MOT: 04/2027 * Inspection: 10/2027 ----Even after the purchase, we will not leave you alone: We will assist you in obtaining export or temporary registration plates. Transport of your vehicle within Germany is also possible. Just contact us – we will be happy to help you! We speak German, English and Russian. All information is without guarantee. Subject to changes, errors, printing and typesetting errors as well as prior sale.----About us: Leible Nutzfahrzeuge is a family-owned company based in Kehl on the Rhine. For many years, we have stood for experience, reliability and competence in the field of refurbishment and sales of commercial vehicles. Our strength lies in the buying and selling of new and used commercial vehicles. On our approximately 11,000 m² site, you will find a wide selection of vehicles for a wide range of purposes. We not only focus on the vehicle itself, but also on the service behind it. Fairness, integrity and customer satisfaction are our top priorities. That is why we support you personally and reliably - from the first contact to the handover of your vehicle. Convince yourself. We look forward to your inquiry!----Our service for you: Vehicle loading We will help you load your purchased vehicles. Special transports We will support you in the organization of special transports. Export and temporary registration plates We will help you obtain export or temporary registration plates. Customs formalities We will also support you in customs matters. Vehicle transport If desired, we will organize the transport of your vehicle within Germany.

Condition: used, maximum load weight: 12,280 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 04/2004, next inspection (TÜV): 04/2027, loading space length: 7,860 mm, loading space width: 246 mm, loading space height: 2,060 mm, loading space volume: 40 m³, total length: 10,425 mm, total width: 2,550 mm, total height: 3,570 mm, Year of construction: 2004, Equipment: ABS, Keppler ZA18L – 2-axle beverage trailer – Swing-wall body – Forklift pocket – 18 tons VIN: WKH2ZA18L4A004895 Godpfj Akf Uhjx Akhjkd Chassis / Components: * 2 BPW axles * Air suspension with H+S (raise and lower function) * Disc brakes * ABS * Tires: 385/65 R22.5 * Remaining tire tread: 1st axle 50/70%, 2nd axle 50/50% * ABS and 15-pin electrical connection * WABCO Duo-Matic brake connection * AL-KO support jacks with crank * Forklift pocket at the rear * Spare wheel holder on the side of the chassis * Wheel chock holder * LED work lights at the rear Body: * Keppler swing-wall beverage body * Internal dimensions (L x W x H): 7,860 x 2,462 x 2,059 mm * Load volume: approx. 39.8 m³ * Pallet stop on the right * Slotted rails in the floor and on the ceiling for securing the load * Mounting for vertical load securing bars for securing beverage pallets * Manufacturer's certificate according to VDI 2700 sheet 12 for beverage transport available Weights: * Permissible total weight: 18,000 kg * Unladen weight: 5,720 kg * Payload: 12,280 kg Other: * Manufacturer: Keppler * Type: ZA18L * First registration: 06.04.2004 * Color: Silver * MOT: 04/2027 * Inspection: 10/2027 ----Even after the purchase, we will not leave you alone: We will assist you in obtaining export or temporary registration plates. Transport of your vehicle within Germany is also possible. Just contact us – we will be happy to help you! We speak German, English and Russian. All information is without guarantee. Subject to changes, errors, printing and typesetting errors as well as prior sale.----About us: Leible Nutzfahrzeuge is a family-owned company based in Kehl on the Rhine. For many years, we have stood for experience, reliability and competence in the field of refurbishment and sales of commercial vehicles. Our strength lies in the buying and selling of new and used commercial vehicles. On our approximately 11,000 m² site, you will find a wide selection of vehicles for a wide range of purposes. We not only focus on the vehicle itself, but also on the service behind it. Fairness, integrity and customer satisfaction are our top priorities. That is why we support you personally and reliably - from the first contact to the handover of your vehicle. Convince yourself. We look forward to your inquiry!----Our service for you: Vehicle loading We will help you load your purchased vehicles. Special transports We will support you in the organization of special transports. Export and temporary registration plates We will help you obtain export or temporary registration plates. Customs formalities We will also support you in customs matters. Vehicle transport If desired, we will organize the transport of your vehicle within Germany.

Condition: new, clear span: 2,700 mm, total length: 2,780 mm, The scope of delivery includes: Gkedjzu Andspfx Akhod 1x Push-through safety device, new Type: universal Suitable for field width: 2,700 mm Customs tariff number: 73066192 Consisting of EACH: 1 x Rectangular tube, 2nd choice (new goods) Material color: RAL 5010 blue Dimensions: 50x40x2.0 mm Weight: 2.64 kg | per meter Borehole diameter: 9 mm Tube length: 2,780 mm Center-to-center distance: 2,740 mm 2x Corner angle bracket, new Material color: sendzimir galvanized Design: Mounting bracket Profile dimensions: 155 x 120 mm Head plate: 120 x 40 mm Overhang: 75 mm Design: 90 degrees Opening for square tube: 51 x 51 mm Material thickness: 3.00 mm Weight / piece: 0.460 kg Incl. each: 4 x Screws, M8 x 20 mm 4 x Nuts, M8 4 x Washers, M8 2 x Screws, M6 2 x Nuts 2 x Washers You can also request the following additional lengths: (For field width:) 1,350 mm = €18.00 plus 19% VAT 1,800 mm = €23.00 plus 19% VAT 1,900 mm = €25.00 plus 19% VAT 2,000 mm = €26.00 plus 19% VAT 2,100 mm = €27.00 plus 19% VAT 2,200 mm = €28.00 plus 19% VAT 2,300 mm = €29.00 plus 19% VAT 2,400 mm = €31.00 plus 19% VAT 2,500 mm = €32.00 plus 19% VAT 2,600 mm = €33.00 plus 19% VAT 2,800 mm = €36.00 plus 19% VAT 2,900 mm = €37.00 plus 19% VAT 3,000 mm = €38.00 plus 19% VAT 3,100 mm = €39.00 plus 19% VAT General information about the item: This item is offered for pick-up only. Any additional transport or shipping of this item will incur extra costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: like new (used), Ideal for traverses 2700 mm. If you require shelves or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelving and accessories and will be happy to assist you with your planning. Gedpfxopu Amws Akhokd Further accessories such as Frame, corner and collision protection, push-through protection, chipboard, gratings, rear wall gratings, depth bars available. Shipping: Please enquire about freight costs, stating your zip code and location, as well as the required quantity of items. Further services: Planning, shelf assembly/disassembly, purchase/sale Subject to changes and errors in technical data, information and prices as well as prior sale!

Condition: used, maximum load weight: 2,187 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 01/2023, loading space length: 3,010 mm, loading space width: 1,830 mm, loading space height: 350 mm, total width: 2,290 mm, total height: 2,785 mm, A48 GW26000051 Low-bed trailer by STEMA, model SySTEMA ST 27-30-18.2, equipped with tarpaulin and Premium frame, 150 cm (185 cm internal height), gross vehicle weight: 2,700 kg, with overrun brake, 100 km/h Gkedpfjytzubex Akhjd Subject to errors and prior sale.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-14, empty load weight: 814 kg, maximum load weight: 1,886 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K3 306 170 2700 2 3-way tipper + enclosed leaf guard 60cm NEW VEHICLE Internal dimensions: 306cm x 170cm Side board height: 30cm Loading area height: 66cm Total weight: 2700kg Payload: 1886kg braked tandem trailer overrun brake and parking brake from KNOTT 2x 1350kg axle with brake Gkjdjz Egkhspfx Akhsd low chassis fully welded, hot-dip galvanized steel frame aluminum profile side boards with tension lock can be folded down and removed on all sides enclosed leaf guard 60cm made of hot-dip galvanized steel can also be opened and removed on all four sides 15mm thick, non-slip and robust screen-printed wood floor additional steel plate on wood floor automatic support wheel with 400kg support load 6 noise-reducing lashing eyes with 800kg tensile force reinforced 13" C tires with steel valve M+S tires net/rope hook on the frame 13-pin connector LED marker lights at the front lights at the rear with reversing light and triangular reflectors upper frame mounted on rubber large tipping angle of 51 degrees to the rear hand pump with adjustable handle OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -without side boards (price reduction) -Side board height increased to 35cm -Black Edition (powder-coated side boards and rims in black) -integrated loading ramps 2800kg -electric tipping control -charger -remote control -Bluetooth remote control -emergency hand pump in combination with electric control -safety support for maintenance work on the tipped vehicle -foldable crank for rear supports -complete LED lighting -theft protection -net with fine or coarse mesh -H-frame -leaf guard in various heights, also closed -additional side boards 30cm with tension lock -flat cover with or without railing -high cover 160cm or 180cm further accessories on request! plus. freight to Gera and vehicle registration document €250 net Images are for illustrative purposes only and may show optional accessories at an extra charge. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and ready for immediate pick-up. The workshop is open on weekdays from 8:00 am to 5:00 pm for all types of repairs. Specialist in axle repair, also for caravan trailers. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website or come by directly.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-2, empty load weight: 750 kg, maximum load weight: 1,950 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K3 306 170 2700 2 Three-sided tipper + integrated aluminum loading ramps NEW VEHICLE Internal dimensions: 306cm x 170cm Side wall height: 30cm Loading platform height: 75cm Total weight: 2700kg Gkedpfxszxrydj Akhed Payload: 2006kg Braked tandem axle trailer Overrun brake and handbrake from AL-KO 2x 1350kg axle and brake Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side walls with tensioning latch Can be folded down and removed on all sides 15mm thick, non-slip, and robust screen-printed wooden floor Additional steel plate on the wooden floor Pair of aluminum loading ramps with a 2.8T load capacity in the rail compartment Automatic support wheel with 400kg support load 8 noise-reducing lashing eyes with 800kg tensile force Reinforced 13" C tires with steel valve M+S tires Net/rope hook on the frame 13-pin connector LED marker lights at the front Rear lights with reversing light and triangular reflectors Upper frame mounted on rubber pads Large tipping angle of 49 degrees backwards Lateral tilting by repositioning the safety pins Hand pump with adjustable handle U-rail for attaching the original SARIS loading ramp OPTIONAL ACCESSORIES – PERMANENT PRICE REDUCTION FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Without side walls (price reduction) -Black Edition (Powder-coated side walls and rims in black) -35cm side walls -Charger -Electric tipping control -Remote control -Bluetooth remote control -Emergency hand pump in combination with electric operation -Safety support for maintenance work on a tilted vehicle -Folding crank for rear supports -Complete LED lighting -Anti-theft device -Net with fine or coarse mesh -H-frame -Leaf grid in various heights, also closed -Extension side walls 30cm with tensioning latch -Flat cover with or without bows -High cover 160cm - 200cm Further accessories available upon request! Plus freight to Gera and vehicle registration document 250 € net Images are for illustrative purposes and may show optional accessories at an extra cost. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, also for caravans. In addition, we have a large selection of spare parts and accessories for trailers from various manufacturers. You will find a large selection of rental trailers with us. Visit us online or come by directly!

Condition: like new (used), Year of construction: 2019, operating hours: 20 h, functionality: fully functional, overall weight: 1,069 kg, load capacity: 120 kg, arm reach: 2,701 mm, controller manufacturer: KUKA, controller model: KR C4, teach pendant manufacturer: KUKA, teach pendant model: KUKA SmartPAD, warranty duration: 12 months, Equipment: documentation/manual, KUKA KR 120 R2700-2 with KR C4 – AS NEW / only 19.95 operating hours We offer a KUKA KR 120 R2700-2 industrial robot in as-new condition with KUKA KR C4 controller. Manufactured in 03/2019 with only 19.95 operating hours. Robot specifications - Model: KUKA KR 120 R2700-2 - Payload: 120 kg - Reach: 2701 mm - Year of manufacture: 03/2019 - Operating hours: 19.95 h - Cable set: INT 084ST2700 - Configuration: ES13 133 CTR MB1 PNT EPS AIR - Colour: KUKA Industrial Orange Controller - KUKA KR C4 EU - KSS 8.5 - Servo configuration SC4.1 - 400 V transformerless power supply - Siemens SCALANCE X208 Gjdpfx Ajzyyynskhskd - Parallel Safety interface X11 - Ethernet interface X66 - CSP 2x USB 3.0 - Cabinet base with spacer - Set of 75 mm rollers Installed KUKA software & technology packages - KUKA.PROFINET M/S 4.1 - KUKA.DiagnoseSafety 3.0 The robot is supplied with the complete configuration according to the attached technical specification. 12-month warranty included. CUSTOM CONFIGURATION AVAILABLE The robot can be supplied in its current configuration or customized according to the customer's application and technical requirements. Depending on the application, RSA Systems can provide configuration and installation of suitable KUKA software and technology packages, communication interfaces and fieldbus systems, as well as configuration for external axes and other application-specific requirements. Additional services available on request Installation & commissioning | Programming & optimization | Integration & automation | Custom robot configuration | Technical support | ISO 9283 metrology & calibration | KUKA robot training Inspection and functional demonstration of the robot at our facility is possible by appointment. Send us your application and technical requirements and we can prepare the robot configuration according to your project. RSA Systems s.r.o. Experience. Reliability. No Compromise.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-2, empty load weight: 726 kg, maximum load weight: 1,974 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K3 306 170 2700 2 – Three-sided tipper with electric tipping system NEW VEHICLE Internal dimensions: 306cm x 170cm Side panel height: 30cm Loading platform height: 75cm Total weight: 2700kg Payload: 1974kg Braked tandem trailer Overrun brake and handbrake by AL-KO 2x 1350kg axle and brake Low chassis Fully welded, hot-dip galvanized steel frame Electric tipping system 12V 95Ah AGM battery Electronic tipping limiter Plug + socket for charging Aluminum profile side panels with tension lock Can be folded down and removed on all sides 15mm thick, non-slip, and robust screen-printed wooden floor Additional steel plate on the wooden floor Automatic jockey wheel with 400kg support load 8 noise-reducing lashing eyes with 800kg pulling force Reinforced 13" C tires with steel valve M+S tires Net/rope hook on the frame 13-pin plug LED marker lights at the front Rear lights with reversing light and triangular reflector Upper frame mounted on rubber Gsdpfx Aozu Sgvjkhjkd Large tipping angle of 49 degrees backward Lateral tipping by repositioning the safety pins Hand pump with adjustable handle U-rail for attaching the original SARIS ramp OPTIONAL ACCESSORIES – PERMANENTLY REDUCED PRICE STARTING FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Without side panels (price reduction) -Black Edition (Powder-coated side panels and rims in black) -Integrated ramps 2800kg -35cm side panels -Battery charger -Remote control -Bluetooth remote control -Emergency hand pump in combination with electric operation -Safety support for maintenance work on tilted vehicle -Folding crank rear supports -Complete LED lighting -Theft protection -Net with fine or coarse mesh -H-frame -Leaf grid in various heights, also closed -Extension side panels 30cm with tension lock -Flat tarpaulin with or without bars -High tarpaulin 160cm - 200cm Further accessories available on request! Plus freight to Gera and vehicle registration document €250 net Pictures are examples and may show optional accessories that incur additional costs. Haven't found the right trailer yet? We have 50-100 vehicles permanently and immediately available in stock. The workshop is open on weekdays from 8:00 AM to 5:00 PM for all types of repairs. Specialist in axle repair, including for caravans. In addition, we have a large selection of spare parts and accessories, also for trailers from various manufacturers. You will find a large selection of rental trailers with us. Visit us online or come directly to us!

Condition: used, maximum load weight: 2,187 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 01/2023, loading space length: 3,010 mm, loading space width: 1,830 mm, loading space height: 350 mm, total width: 2,290 mm, total height: 2,785 mm, A48 GW26000051 Godpfx Ajyqdqgekhskd Low loader by STEMA, model SySTEMA ST 27-30-18.2, with Premium tarpaulin and frame 150 cm (185 cm interior height), GVWR: 2,700 kg, overrun brake, approved for 100 km/h Subject to errors and prior sale.