Used Advertising Material for sale (18,436)

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: CO1040, The following components have been replaced: Kedpfx Aez I Tkmob Njnc Engines Gearboxes Chains TECHNICAL DETAILS Design: Double-shaft paddle mixer Material: Stainless steel Batch capacity: 1,200 kg EQUIPMENT Stainless steel storage container at the bottom

Condition: ready for operation (used), functionality: fully functional, TECHNICAL DETAILS Sterilization process: Vacuum-assisted steam sterilization Sterilization temperature: 121–134 °C Vacuum cycles: Pre- and post-vacuum Chamber material: Stainless steel AISI 316L Pipe material: Stainless steel AISI 316L MACHINE DETAILS Kodpfxoz I Ti Ns Ab Njnc Control: PLC-based control Operation: HMI touchscreen Monitoring: Real-time cycle control with batch documentation Sensors: Integrated temperature and pressure sensors Standards: EN 285, PED, ISO 9001, GMP Validatability: According to ISO 17665 EQUIPMENT Stainless steel sterilization chamber with polished surface Vacuum pump system for pre- and post-vacuum Steam generation and steam distribution system PLC control with HMI touchscreen Integrated temperature and pressure sensors Diagnostics: Integrated self-test functions Media supply: Steam, water, compressed air, and power supply Door operation: Automatic Door locking: Safety interlock to prevent opening under pressure

Condition: new, Year of construction: 2026, Compact Material Lift 5 m / 300 kg – A Versatile Tool for Handling and Installation Tasks Key Advantages of the Lift Load capacity up to 300 kg – safe lifting of boxes, equipment, pallets, and assembly components. Lifting height of 5 meters – ideal for working at various levels, including ceiling installation tasks. Three-section mast – smooth extension of top, middle, and bottom sections for maximum working height. Self-adjusting and all-terrain wheels – easy transport over uneven surfaces, thresholds, and stairs. Winch system with self-locking brake – ensures the load remains safely at the desired height. Mast lock – prevents accidental lowering in case of a lifting mechanism failure. Stabilizing outriggers – guarantee structural rigidity when operating under full load. Construction and Technology The device is designed for intensive use and ergonomic operation. The three-section mast with a telescopic system allows for compact transport dimensions while reaching the full working height of 5 meters. The mast sections extend smoothly and safely, and the integrated locking mechanisms ensure full control of the load during every stage of operation. Durable forks provide stable support for various types of loads. Their construction ensures even weight distribution, which is especially important when working with installation devices or construction materials. Large-diameter wheels and self-adjusting travel components allow the lift to move efficiently over rough terrain and in narrow working spaces. Work Safety The lift is equipped with a range of safety features, including: Self-locking brakes in the winch mechanism – protect against sudden dropping of the load. Mast lock – increases safety during stationary use and static work. Kedew U Scfjpfx Ab Nsnc Side outriggers – eliminate the risk of tipping over under heavy load. Applications This compact material lift is a universal tool suitable for many industries: Construction and technical installations – installation of air conditioners, fans, ducts, and structures at height. Warehousing and logistics – stacking goods on racks, loading and unloading delivery vehicles. Retail and exhibition setups – mounting displays, banners, advertisements, or store lighting. Industrial manufacturing – handling components and equipment during assembly of production lines. Standard Equipment Three-section mast with safety lock Heavy-duty forks Winch system with self-locking brake Two stabilizing outriggers All-terrain and self-adjusting wheels Material Lift Specifications: Parameter Value Lifting height 5000 mm Fork length 690 mm Folded height 2000 mm Length (folded/unfolded) 740 / 1880 mm Width (with stabilizers extended) 800 / 1850 mm Ground clearance 50 mm Minimum fork height 150 mm Weight 145 kg Maximum load capacity 300 kg Capacity based on center of gravity: – up to 60 cm 300 kg – up to 80 cm 250 kg – up to 100 cm 150 kg

Condition: like new (used), Year of construction: 2022, functionality: fully functional, EURO-Jabelmann bagging scale, model TN 260, with bulk material hopper 1,500 × 1,500 mm – manufactured in 2022 – like new, including accessories. For sale is a practically new bagging scale, model TN 260, from EURO-Jabelmann (manufacturer based in Itterbeck, Made in Germany), with an upstream bulk material hopper measuring 1,500 × 1,500 mm, manufactured in 2022. The scale doses and fills bulk materials such as potatoes, onions, vegetables, or firewood directly from the storage hopper into bags. Condition: – Like new, barely used – Fully functional – Inspection and test run possible by arrangement Included in delivery: – Bagging scale, model TN 260, with bulk material hopper 1,500 × 1,500 mm – “Gantry” for hand sewing machine with roller track, roller mechanism, and aluminum spring balancer (load capacity 4–6 kg) – new price €825 net – 2x hand sewing machine, Union Special 4000A (bag sewing machine, single-thread chain stitch, with thread separator, 90 W) – new price €1,425 net each Knsdpoz Tda Rsfx Ab Nsc New price of the scale without accessories: €18,950 net. New price of the entire package: €22,625 net. Price: €10,900 net plus VAT for the complete package, negotiable – VAT can be shown separately. Collection & Shipping: – Location: 31848 Bad Münder am Deister – Loading assistance is provided – Shipping via freight forwarder is possible for an additional charge.

Year of construction: 2026, condition: new, Our KVK 3 Slim Line is a semi-automatic stretch wrapper with turntable. It is equipped with a pre-stretch system for 250% stretching. Thanks to the pre-stretch system, you can produce up to 3.5 m of film on the pallet from 1 m of film on the roll and reduce your material consumption enormously. In addition, this system creates only minimal contact tension, so that even light packages are not pulled off the turntable. Knodpfx Aez E Iwieb Nsc With a weight of 700 kg, this model is very stable and designed for loads of up to 1500 kg. The KVK 3 Slim Line has a 1500 mm turntable and can wrap pallets up to 2250 mm high as standard. With adjustable speeds for the turntable and film carriage, as well as a potentiometer-controlled power stretch unit, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs for "up & down" (cross wrapping) and "rainproof" wrapping are available. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. A suitable drive-on ramp and a photocell for detecting dark packaging materials or black film are optionally available. This model is our clear recommendation if you wrap very light packages or wrap more than approx. 20 pallets a day and do not exceed a maximum pallet dimension of 800 x 1200 x 2250 mm. For further information we have attached the technical data sheet as PDF to this advertisement !

Condition: used, maximum load weight: 25,600 kg, overall weight: 31,500 kg, axle configuration: 2 axles, first registration: 05/2007, next inspection (TÜV): 06/2026, loading space volume: 33 m³, total width: 2,550 mm, total height: 3,240 mm, Equipment: ABS, * Willig Fahrzeugbau tank body, manufactured in 2007 * Tank material: AL-Leq * TRIDEC steering system * 4 compartments with a total capacity of 33,000 liters * F.A. Sening tank truck hydraulic system with pump, manufactured in 2007 * Flow rate: 1000 l/min * Large hose reel (50m) at the front * 2nd hose reel (30m) mounted on the pump in a transport box * Hose reel brake * Volumetric flow meter * ?Petrodat TMU control unit * BARTEC Ultrakust Petrodat measuring system * Wabco trailer EBS * BPW ECO Plus steered axles * Drum brake * ?Storage box * Fire extinguisher * Wheel chocks * ?Volume per compartment (1/2/3/4): 3700/6500/4200/8600 liters * Tire size: 425/65R22.5 * Technical total weight: 32,000 kg * Tare weight: 5900 kg * Overall length: 9270 mm * Vehicle inspection/MOT: expired * Vehicle number: 12036 * Errors and prior sale excepted * Advertisements and various lettering have been digitally removed. * We will be happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee: * Trade-in of your old vehicle * TÜV/MOT inspection * Complete export processing * Arranging financing Kjdpfsy T Ui Tox Ab Nenc * Applying for export license plates * Vehicle transport * Vehicle registration * Recovery and vehicle transport services * ?YOUR VTS TEAM

Year of construction: 2026, condition: new, Our KVK 2A is a semi-automatic stretch wrapper with a cut-out for ground level access. The KVK 2A model is equipped with a pre-stretch system for 250% stretch. Thanks to the pre-stretch system, you can produce up to 3.5 meters of film on the pallet from 1 meter of film on the roll and reduce your material consumption enormously. In addition, this system creates only minimal contact tension, so that even light packages are not pulled off the turntable. Ksdpfx Absz E Ixas Nenc With a weight of 700 kg, this model is very stable and designed for loads of up to 1500 kg. The KVK 2A has a 1500 mm turntable and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of turntable and film carriage, as well as a power stretch unit adjustable via potentiometer, you can adapt the automated wrapping perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. This model is our recommendation if you wrap very light packages or if you wrap more than approx. 30 pallets a day. The KVK 2A is ideal if no ramp can be used for space reasons. Or if particularly heavy or unstable packaged goods are not to be pushed onto the turntable via a ramp. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Condition: used, maximum load weight: 31,570 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2016, next inspection (TÜV): 02/2027, loading space volume: 53 m³, Year of construction: 2016, Equipment: ABS, Stock no. 5871 53,000-liter Heitling silo semi-trailer for powdery and granular materials / 8 compartments / Steered ----* Manufacturer: Heitling * Type: SDBH 53 - Silo semi-trailer * First registration: 05/2016 * Gross vehicle weight: 39,000 kg * Unladen weight according to vehicle registration document: 7,430 kg * Payload: 31,570 kg * Axles: 3 axles with 1st axle as a lift axle / 3rd axle electro/hydraulically steered (VSE steering) * Suspension: Air suspension with lifting and lowering function * Tires: 385/65 R22.5, approx. 50% tread remaining, on aluminum rims * EBS Wabco * Color: RAL 6018 / Yellow-green * TÜV (technical inspection): 02/2027 * Internal inspection: 04/2030 * External inspection: due * Volume: 53 m³ in 8 compartments (5 m³ / 5 m³ / 4.3 m³ / 4.3 m³ / 8.6 m³ / 8.6 m³ / 8.6 m³) * Pressure tank 2 bar * Operating temperature from -20 degrees to +50 degrees * 7 compartments Kodozz Uwdopfx Ab Nenc * Control box at the rear with motor control * 8 sliding covers NW450 * 7 funnel cones * Discharge pipe NW 90 to the rear * Solimar loosening device * Access platform at the front and rear with walkway on the left, pneumatically operated from below * 3 x hose pipe boxes on the left and right * Cyclone * Stainless steel tool box at the rear right and in the middle right * Individual mudguards * Full-load supports (outrigger supports) * LED rear lights * 6 x LED work lights * LED reversing lights * Holder for waste bin at the rear left * Water tank with soap dispenser at the front left * Wabco Smartboard German semi-trailer!! German documents!! Note on possible errors in the advertisement: Despite careful preparation of the advertisement, individual errors may have crept into the text or the information provided. We assume no liability for errors, changes or interim sales. All information is without guarantee. Please contact us to verify details or clarify further questions.

Year of construction: 2026, condition: new, Our KVK 5 is a semi-automatic rotary arm wrapper, which has the advantage over our wrappers with turntable that your pallets can be placed at ground level for the wrapping process. Equally ideal for light, unstable and heavy packaged goods, as there are no centrifugal forces and no load-bearing capacity to consider. In addition, the KVK 5 model is equipped with a pre-stretch system for 250% elongation. This pre-stretching system allows you to produce up to 3.5 m of film on the pallet from 1 m of film on the roll and reduce your material consumption enormously. With the KVK 5, there is only minimal contact tension, so that even light packages are not pulled off the pallet. The only thing that still has to be done manually with this wrapper is applying and cutting the film. Knjdpfx Aez E Ixtob Nsc The machine weight of almost 1000 kg shows how solid and stable this wrapper is. With its rotating arm, it can wrap pallets up to a maximum dimension of 1.00 x 1.20 x 2.40 m. With adjustable speeds of the rotating arm and film carriage, as well as a pre-stretching unit adjustable via potentiometer, you can adapt the automated wrapping perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. In addition to an optional photocell for the detection of dark packing goods or black film, this wrapper can be supplied either for wall mounting or with the feet shown. We recommend this model if it is important to you not to have to overcome a ramp with your goods - for example because they are too heavy or unstable. The fact that the rotating arm in this design rotates around the pallet also avoids any centrifugal force. Together with the low contact tension of the pre-stretch system, this also makes the KVK 5 ideal for very light packaged goods. For further information we have attached the technical data sheet as PDF to this advertisement !

Condition: used, INSTRON Spring Testing Machine / Universal Testing Machine SPRING SF1392-E1-L12-SPL Professional 100 kN testing machine for spring, compression, and material testing Knedpezlp Ixefx Ab Njc For sale is a used spring testing machine from the manufacturer INSTRON. The system was designed for highly precise spring, compression, and material testing. It is ideal for use in testing laboratories, research and development, quality assurance, and industrial manufacturing. Technical data: Manufacturer: INSTRON Type: SPRING Model: SF1392-E1-L12-SPL Serial number: SPRGK4348 Year of manufacture: 2007 Testing force: 100 kN Power supply: 240 V AC / 1~ / 50–60 Hz Mains current: 25 A Control voltage: 24 V AC / 50–60 Hz Max. ambient temperature: 40 °C Dimensions: Machine (W × D × H): approx. 1,307 × 757 × 2,392 mm Sliding door with 0 mm additional opening space Base Extension Model: 2910-061 Weights: Testing machine: approx. 1,145 kg Base Extension: approx. 96 kg 5800 Controller: approx. 31.8 kg Total weight: approx. 1,273 kg 5500 Controller: Dimensions (H × W × D): 650 × 280 × 570 mm Weight: approx. 31.8 kg Equipment: 100 kN testing frame Protective enclosure with sliding door Base Extension Model 2910-061 Instron 5500 Controller Operating console Industrial PC Monitor Keyboard Mouse Emergency stop system Testing platens / compression tools as shown in the pictures Technical documentation as shown in the pictures Application areas: Spring testing Compression testing Material testing Component testing Load testing Material testing Quality assurance Testing laboratory Research & Development Scope of delivery: Instron SPRING SF1392-E1-L12-SPL Base Extension Model 2910-061 Instron 5500 Controller Operating console Testing platens / compression tools as shown in the pictures Machine accessories as shown in the pictures Technical documentation as shown in the pictures Important note: To operate the system, the original Instron testing software including a valid software license is required. The software and the software license are not included in this offer. According to the manufacturer, a corresponding retrofit is required for recommissioning. A functional test could not be carried out due to the missing software. The sale is therefore preferably aimed at specialist companies for recommissioning or upgrading. Condition: Used Optical condition according to the pictures. Normal signs of wear and tear are present. The workbench shown in the photos is not part of the sale. The operating console and the machine accessories shown are included in the scope of delivery. Transport information: Original shipping dimensions according to the manufacturer: 2,795 × 1,600 × 1,295 mm (L × W × H) Shipping weight according to the manufacturer: approx. 1,565 kg Loading with a forklift is possible. Shipping via a freight forwarder is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone or email.

Condition: used, Zwick / Roell Universal testing machine / Material testing machine Zwick / Roell ProLine Z005 Universal Testing Machine 5 kN testing machine for tensile, compression, and material testing For sale is a used universal testing machine from the manufacturer Zwick / Roell. The machine is suitable for tensile tests, compression tests, material testing, component testing, quality assurance, research and development, and laboratory applications. Technical data Manufacturer: Zwick / Roell Type: ProLine Z005 / 5 kN ProLine Type of device: Universal testing machine / Material testing machine Year of manufacture: 2016 Made in Germany Maximum testing force: 5 kN Load cell: Zwick Xforce P Rated force of load cell: 5 kN Start of measurement, accuracy class 1: 20 N Start of measurement, accuracy class 0.5: 100 N Nominal measuring range: 0.06 mm Machine dimensions: approx. 917 x 439 x 1331 mm (W x D x H) Frame width: approx. 720 mm Installation width of frame: approx. 770 mm Testing space width: approx. 440 mm Machine weight: approx. 200 kg Kjdpezfy Ivofx Ab Nenc Weight of load cell: approx. 0.65 kg Mains connection: 230 V Frequency: 50 / 60 Hz Current consumption: 3.5 A Connection: 1L / PE / N Measuring module: DCSC Measuring range: 0.2 % to 165 % of the nominal measuring value Measurement value acquisition rate: max. 10 kHz Measuring input: Differential input Sensor supply: 10 V DC Strain gauge bridge resistance: 175 to 1200 Ω Connection type: 4- and 6-conductor technology Nominal sensitivity: 2 mV/V Connection thread for load cell: M28 x 1.5 Connection bolt: Ø 20 mm Dowel pin: Ø 8 mm Degree of protection of load cell: IP54 Load cell Type: Xforce P Rated force: 5 kN Working force max.: 150 % of Fnom Limit force: 150 % of Fnom Breaking force: 300 % of Fnom Limit transverse force: 100 % of Fnom Component height: 95 mm Installation dimension: approx. 72 mm Installation height: approx. 61 mm Diameter: 54 mm Equipment Zwick / Roell ProLine testing frame Xforce P 5 kN load cell DCSC measuring module Electronic force measurement Machine electronics on the side of the load frame PC system / testing software as shown in the pictures Accessories as shown in the pictures Application areas Tensile testing Compression testing Material testing Material characterization Quality assurance Incoming goods inspection Research and development Laboratory applications Condition Used Optical condition as shown in the pictures Scope of delivery 1x Zwick / Roell ProLine Z005 Universal Testing Machine 1x Xforce P 5 kN Load Cell 1x DCSC Measuring Module PC system / Software as shown in the pictures Accessories as shown in the pictures The table shown in the photos, as well as any other items not explicitly mentioned, are not included in the sale. Shipping or forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, first registration: 06/2026, fuel type: gasoline, empty load weight: 4 kg, color: grey-black, gearing type: mechanical, Year of construction: 2026, TITLE: USED SKIP LOADER CONTAINER WITH HYDRAULIC ROOF FOR BULKY WASTE, HARDOX MATERIAL, REAR OPENING WITH SINGLE-DOOR DOUBLE-ACTING HINGED AND TILTING GATE + MEC CRANE WITH PANTOGRAPH OUTRIGGERS AND 6-BLADE GRAPPLE WITH HYDRAULIC ROTATOR REF: 24-U-99 TYPE: Bulky waste with crane NEW: No ROOF: No OPENING: Rear, single-door, double-acting Kjdszc Schspfx Ab Njnc OVERALL DIMENSIONS TOTAL EXTERNAL LENGTH: 7.00 m BOX LENGTH: 5.80 m + 1.00 m crane space + 0.20 m beams EXTERNAL BOX WIDTH: 2.55 m INTERNAL / EXTERNAL BOX HEIGHT: 2.30 m / 2.50 m CUBIC METERS: 30 WEIGHT: 7980 kg FLOOR THICKNESS: 5 mm WALL THICKNESS: 4 mm COLOR: Green CRANE DATA BRAND: MEC CL120.85.S3 MTR. C01059 YEAR: 2018 LENGTH: 8.50 m EXTENSION: 3 CAPACITY: 1,200 kg max at the tip. Errors and/or omissions excepted. The prices shown do not include VAT. Please contact the sales representative for an updated comparison of prices and conditions. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile AURORA SKIP LOADERS operates in the sector of selling and purchasing industrial and commercial vehicles, specializing mainly in the waste management sector. Specialized in trucks, trailers, and skip loader equipment. With a stock of over 50 trucks and over 150 bodies, containers with and without skip loader cranes, available for immediate delivery. S.E.&O Given the quantity of advertisements and details provided, Aurora invites you to verify the accuracy of the data with the sales staff.

Condition: good (used), Year of construction: 2021, Active hazardous material container, Protecto – used: Price at location: now only €19,950.00 instead of €29,500.00 (net), plus loading and transport costs! Manufacturer: Protecto Year of manufacture: 2021 Type: Hazardous material container SRC 3.2TA, galvanized Design with collection basin, insert shelves, and a ramp Air conditioning system with cooling, heating, and supply/exhaust ventilation External dimensions (W x D x H): 2985 x 4710 x 2470 mm Internal dimensions (W x D x H): 2770 x 4372 x 2051 mm Weight: 1821 kg Collection volume: 2 x 1000 liters Load capacity: 1000 kg/m² (evenly distributed load) Max. point load (200x200mm): 1.96 kN With DIBt approval Z-38.5-229 For the active storage of temperature-sensitive, water-polluting (WGK 1 - 3) as well as flammable and highly flammable liquids (H224, H225, H226) in conjunction with a technical ventilation system (accessory, not included) and in compliance with the safety distances according to TRGS 510, Media resistance according to DIN 6601 Surface: galvanized Walls and roof elements made of galvanized trapezoidal profiles and strong, galvanized end profiles 1-leaf or 2-leaf door selectable (see separate item) Knjdpfx Ajz Tdzneb Njc 100 mm ground clearance ensures that the container can be driven under and avoids contact corrosion; entry height 303 mm In addition, thermally insulated on five sides with 60 mm thermal insulation panels, laminated on both sides with galvanized sheets and a non-combustible insulation material, A1 according to DIN 4102 Surface: gray-white (inside) Roof designed for a snow load of 125 kg/m² Drainage via internal rainwater gutters Standing area with removable, galvanized grating (mesh size 44x44 mm) Basin material: Steel sheet S235JR according to DIN EN 10025, galvanized 1-leaf door for hazardous material container SRC External dimensions (W x H): 1290 x 1996 mm Clear door dimensions (W x H): 1240 x 1963 mm Handle set, mortise lock with drill-resistant cylinder, 2 keys Door stop: DIN right Ramp / access ramp, galvanized for hazardous material container SRC/MCS External dimensions W x D: 826 x 1250 mm Surface: galvanized Consisting of non-slip sheet metal 3/5 mm Former new price: €35,610.00 (net) Condition: good to very good, only disinfectants were stored inside. Available: immediately Location: 45279 Essen We will gladly send you the detailed documents upon request!

Condition: used, fuel type: gasoline, empty load weight: 3 kg, color: grey-black, gearing type: mechanical, Year of construction: 2026, TITLE: WASTE CONTAINER WITH SIDE AND FRONT FORKLIFT POCKETS, WATERTIGHT UNDERCARRIAGE, 4 LIFTING HOOKS, AND SIDE DISCHARGE VALVE WITH HYDRAULIC LID Knedpfx Aezx Hz Njb Nsc REF: 26-N-32 TYPE: bulky materials NEW: yes LID: yes OVERALL DIMENSIONS TOTAL EXTERNAL LENGTH: 4.10 m TOTAL EXTERNAL WIDTH: 2.10 m INTERNAL/EXTERNAL HEIGHT: 1.80 m + 0.10 m for feet FLOOR THICKNESS: 5 mm WALL THICKNESS: 3 mm COLOR: grey RAL 7000 CUBIC METERS: 13. Subject to errors and/or omissions. The prices shown do not include VAT. Please contact the sales department for an updated price and terms comparison. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile AURORA SKIP LOADERS operates in the sale and purchase of industrial and commercial vehicles, specializing primarily in the waste sector. Specialized in trucks, trailers, and skip loader equipment. With a fleet of over 50 trucks and over 150 bodies, containers with and without skip loader cranes available for immediate delivery. S.E.&O Given the amount of advertisements and details included, Aurora invites you to verify the accuracy of the data with the sales staff.

Condition: new, EPS LINEAR – Automatic length stop system for fast and accurate operation The EPS LINEAR automatic length stop system makes it easy to quickly and accurately position materials to the desired length. The system is suitable for mounting on both new and existing machining equipment and is widely used in the wood, plastics, aluminum, and light steel industries. Simple operation, flexible application Knsdpfstd Tndex Ab Noc Use the clear touchscreen to enter the desired dimension, in millimeters or tenths of a millimeter. The current and set positions are clearly visible thanks to the large indicators and the clear screen layout. EPS LINEAR can be placed on either the left or right side of the machining equipment. The system is available from 1 meter and can be extended up to 14 meters. For working with short pieces, a simple attachment can be easily installed and removed. Technical specifications - Positioning speed: up to 40 meters per minute. - Holding force: 1,800 N. - Accuracy: ± 0.10 mm. - Supply voltage: 230 V, with 24 V control voltage. - Operation: start, stop, reference, measuring probe on/off, and access to parameter settings. - Position display: current and desired position. - Emergency stop: for immediately stopping the system. - Touchscreen: large indicators and a clear key layout. - Attachment for short pieces: easy to install and remove. - Software: fully developed and owned in-house, with continuous updates. - Components: industrial, maintenance-free components. - Cabling: including cable track, available up to a maximum of 14 meters. Want to know more about EPS LINEAR for your machine? Contact TM-Tools B.V. We will be happy to advise you on the options for your application. This advertisement has been prepared with the utmost care. Typographical errors and inaccuracies in the specifications are subject to change.

Condition: good (used), Year of construction: 2020, The material separator from Koch Technik is for sale. The scope of supply includes: the price is per unit, 3 units in stock. 2 x KEM dosing station, version 3.7 – material locking mechanism – level sensor – hopper – pre-mixer, type G 1 x KEM Touch Material separator complete with the components listed above. Mixer, type G: complete with motor and container. Knjdpez Nxwvsfx Ab Njc Supply voltage: 230V.

Condition: used, empty load weight: 5,710 kg, maximum load weight: 42,000 kg, axle configuration: 3 axles, first registration: 06/2017, suspension: air, load capacity: 36,290 kg, 20" 30" 40" 45" STORAGE BOX MANUAL DRAWER Knsdpfs Aa U R Esx Ab Noc EXTENDABLE FRONT AND REAR LIFTABLE FIRST AXLE

Condition: used, fuel type: gasoline, empty load weight: 3 kg, color: red, gearing type: other, Year of construction: 2024, NEW OPEN-TOP CONTAINER FOR BULKY MATERIALS WITH TWO SIDE FOLDING DOORS ON THE DRIVER'S SIDE AND TWO REAR FOLDING DOORS REF.: 22-N-65 TYPE: hook lift C NEW: yes LID: no OPENING: two side doors on the driver's side and two rear doors OVERALL DIMENSIONS TOTAL LENGTH: 7.45 m EXTERNAL WIDTH OF THE BODY: 2.55 m INTERIOR / EXTERIOR FRONT SIDE: 2.20 m / 2.40 m INTERIOR / EXTERIOR REAR SIDE: 2.20 m / 2.40 m INTERIOR / EXTERIOR SIDE SIDE: 2.20 m / 2.40 m mt    BOTTOM FROM: 5 mmP ARETE FROM: 3 mm Knsdpfx Absvm Erae Noc COLOR: red The prices shown do not include VAT. Please contact the sales representative for an updated comparison of prices and conditions. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sector of the sale and purchase of industrial and commercial vehicles specialized mainly in the waste sector. Specialized in trucks, trailers and hook-lift equipment. With a fleet of vehicles ready for delivery of over 50 trucks and over 150 skips, containers with and without hook-lift cranes. S.E.&O Given the quantity of advertisements and details entered, Aurora invites you to verify the correctness of the data entered with the sales staff.

Condition: used, fuel type: gasoline, empty load weight: 3 kg, color: other, gearing type: other, Year of construction: 2024, TITLE: NEW DEMOUNTABLE CONTAINER FOR BULKY MATERIALS, OPEN-TOP DESIGN WITH SINGLE DOOR Ref: 22-N-41 TYPE: Demountable C NEW: Yes LID: No OPENING: Rear, single door with hinged and folding panels OVERALL DIMENSIONS TOTAL LENGTH: 6.00 m + 0.20 m INTERNAL/EXTERNAL HEIGHT: 1.50 m / 1.70 m EXTERNAL BOX WIDTH: 2.50 m VOLUME: 20 m³ FLOOR THICKNESS: 4 mm WALL THICKNESS: 3 mm COLOR: RAL 6029 green The prices shown do not include VAT. Please contact the sales representative for an updated price and terms comparison. Kjdpfx Asv Aqaneb Nsnc For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile AURORA DEMOUNTABLE CONTAINERS operates in the sector of sales and purchase of industrial and commercial vehicles, specializing primarily in the waste management sector. Specialized in trucks, trailers, and demountable equipment. With a readily available stock of over 50 trucks and over 150 bodies, containers with and without demountable cranes. S.E.&O Given the quantity of advertisements and details provided, Aurora encourages you to verify the accuracy of the information with the sales staff.

Condition: used, Year of construction: 2018, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 3016, film width: 780 mm, filling weight (max.): 20,000 g, filling weight (min.): 1,000 g, product height (min.): 100 mm, RADPAK RM-55AI bulk product packaging line – a complete installation For sale, a complete and fully functional bulk product packaging line for products such as: - pellets, - anthracite coal, - granulated fertilizers, - aggregates, Kodpfsz T Ahmsx Ab Njnc - and other bulk materials. The machine enables the packaging of products into plastic bags weighing from 1 to 20 kg. It supports: - simple bags, - bags with a gusset, - bags with a top handle. The line consists of: - RADPAK RM-55AI packaging machine, - RW-04 weighing dispenser, - RC-50 take-off conveyor, - frame with an operating platform, - filling hopper with a bucket elevator, - dust extraction system (2 filters), - screw compressor, - compressed air storage tank, - compressed air dryer. Technical data Manufacturer: RADPAK Sp. z o.o., Włocławek Year of manufacture: 2018 Electrical power supply: 3 × 400 V AC + N + PE, 50 Hz Pneumatic power supply: 0.55–0.60 MPa Factory serial numbers: Packaging machine RM-55AI – no. 3016 Weighing dispenser RW-04 – no. 2093 Take-off conveyor RC-50 – no. 3018

Condition: used, fuel type: gasoline, empty load weight: 3 kg, color: other, gearing type: other, Year of construction: 2024, NEW SKIP LOADER CONTAINER FOR BULKY MATERIALS, FOR OUTDOOR USE, WITH 2 REAR “BOOK-TYPE” DOORS REF.: 22-N-27 TYPE: Bulky materials C NEW: Yes LID: No OPENING: Rear with 2 book-type doors OVERALL DIMENSIONS TOTAL LENGTH: 5.20 m FRONT SIDE: 1.50 m / 1.70 m REAR SIDE: 1.50 m / 1.70 m SIDE: 1.50 m / 1.70 m EXTERNAL BOX WIDTH: 2.50 m CUBIC METERS: 17 FLOOR THICKNESS: 4 mm WALL THICKNESS: 3 mm COLOR: Green For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile AURORA srl operates in the sector of sales and purchase of industrial and commercial vehicles, specializing mainly in the waste management sector. Specialized in trucks, trailers, and skip loader equipment. With a readily available fleet of over 50 trucks and over 150 bodies, containers with and without skip loader cranes. Kjdpfxjvucpxj Ab Njnc Aurora srl collaborates with SCARRABILI CRC, the skip loader specialists. S.E.&O Given the quantity of advertisements and details included, Aurora invites you to verify the accuracy of the information provided with the sales staff.

Condition: used, Zwick / Roell Material Testing Machine / Universal Testing Machine Zwick / Roell Z020 Allround-Line BT2-FR020TNW.A50 20 kN material testing machine for tensile and compression testing with testControl II & testXpert V3.5 For sale is a used material testing machine from the manufacturer Zwick / Roell. The machine is suitable for tensile and compression tests on metals, plastics, elastomers, composite materials, and numerous other materials in the laboratory, quality assurance, research and development. Technical data: Manufacturer: Zwick / Roell Model series: Z020 Allround-Line Type: BT2-FR020TNW.A50 Testing force: 20 kN Testing direction: Tensile & Compression Testing space height: 1000 mm Crosshead speed: 0.0005–1000 mm/min Power connection: 230 V / 50–60 Hz Power consumption: 8 A Electronics: testControl II Software: Zwick / Roell testXpert V3.5 Equipment: Servo-electric material testing machine testControl II control system Industrial PC with installed testXpert V3.5 software 20 kN Xforce P load cell 2.5 kN Xforce P load cell Testing table Test fixture Various connection and cable sets Accessories as shown in the pictures Dimensions and weight: Machine dimensions (approx.): 1244 × 690 × 1324 mm (W × D × H) Weight: approx. 212 kg Kjdpfezra Rqex Ab Nenc Application areas: Tensile testing Compression testing Material testing Quality assurance Research & Development Testing laboratory Education and training Scope of supply: 1 × Zwick / Roell Z020 Allround-Line material testing machine testControl II control system Industrial PC with installed testXpert V3.5 software 20 kN Xforce P load cell 2.5 kN Xforce P load cell Connection and cable sets Further accessories as shown in the pictures Condition: Used Visual condition as shown in the pictures Functional scope as shown in the pictures Nameplates are present The table, monitor, keyboard, and mouse shown in the photos, as well as any other items not explicitly mentioned, are not part of the sale. Shipping or freight forwarding possible. Subject to change, errors and prior sale. We will be happy to answer any further questions by telephone.

Year of construction: 2006, condition: used, Year of manufacture: 2006 Colour: Grey Empty weight: 2.000 kg Dimensions (LxBxH): 215 x 240 x 210 cm - Year: 2006 - Documentation available: No - CE certificate present: No - Transport dimensions: 2150mm x 2400mm x 2100mm (l x w x h) Knedpfezry N Tsx Ab Njc - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, empty load weight: 13,950 kg, maximum load weight: 65,000 kg, axle configuration: > 3 axles, first registration: 06/2010, suspension: air, tire condition: 20 %, load capacity: 51,050 kg, • Extendable • First liftable axle • Self-steering last axle • Hydraulic outriggers • Hydraulic ramps • Winch • Convoy kit • Tie-down rings • Platform height: 93cm • Usable length: 9.75m • Extension: 4.50m Knsdpfx Ao Abafwsb Njc • Hydraulic widening system • Width: 2.50 to 3.10m • Rear inclined section: 2.00m • Gooseneck: 2.80m

Condition: good (used), first registration: 11/2010, color: red, Unladen weight: 16,920 kg Payload: 48,080 kg Gross vehicle weight: 65,000 kg Body brand: NOOTEBOOM OVB-65-04V 48 METERS LONG MATERIAL Extendable body: Yes Technical condition: good Visual condition: good NOOTEBOOM OVB 65-04V LONG MATERIAL SEMI-TRAILER 4 AXLES, HYDRAULICALLY STEERED CENTRAL LUBRICATION Knsdpfx Aox Sxkrjb Njc AIR SUSPENSION TOTAL TELESCOPIC LENGTH: 48 METERS