Used Corrugated for sale (285)

Condition: new, Year of construction: 2025, I-, Z-, or L-shaped belt conveyor to transport small and large, wet, frozen products towards the weighing head unit. Open construction, corrugated sidewalls, water proof, parts in contact with the product are made of polyurethane and are certified to FDA 21 CFR 177.2600. - Specifications: dimensions of conveyor boxes: L(according to product requirements)xW250xH50mm; stainless steel frame; conveying speed: is adjustable; conveyor dimensions: L(depending on the gradient)W450xH3000mm. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Nodpfev Nml Tsx Anfsla Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, LABELshrink tunnel. Basic version with conveyor for smoothly shrinked full labels on bottles/cans/glasses without any corrugation. Air blow controllable by sections. - Specificationen: max. product size: Ø 100xH280mm; tunnel size: L1500xW120xH300mm; machine dimensions: L1800xW600xH1550mm; output: up to 200 bottles/min; power: 380V, 9kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Nedpfev Nlw Uox Anfela

Condition: new, Year of construction: 2025, Label shrink tunnel for shrinking labels on bottles, cans or jars. Basic version with conveyor belt. Powerful air blowers ensure a smoothly shrinking of the labels without corrugations. - Specifications: Max. product size: Ø 140xH350mm; tunnel size: L1600xW150xH400mm; max. output: 200 containers/minute; power: 380V, 14kW; machine dimensions: L1900xW600xH1665mm; weight: 300kg. Nledpfjv Nlxrjx Anfsa Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, LABELshrink tunnel. Fully automatic version with circle conveyor for smoothly shrinked full labels on bottles/cans/glasses without any corrugation. Air blow controllable by sections. - Specifications: max. product size: Ø 200xH300mm; tunnel size: L3000xW250xH350mm; machine dimensions: L5600xW680xH1770mm; output: up to 200 bottles/min; power: 380V, 32kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Nodpfxjv Nlx Ej Anfela

Condition: new, Year of construction: 2025, Label shrink tunnel for shrinking labels on bottles, cans or jars. Version without conveyor belt and with removable frame. The chamber can be installed on existing conveyor belts, allowing the shrink tunnel to be optimally integrated into your packaging line. Powerful air blowers ensure a smoothly shrinking of the labels without corrugations. - Specifications: Max. product size: Ø 110xH250mm; tunnel size: L1500xW120xH300mm; max. output: 200 containers/minute; power: 380V, 14kW; machine dimensions: L1500xW1005xH2100mm; weight: 300kg. Nlsdpfxjv Nlxle Anfja Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Label shrink tunnel for shrinking labels on bottles, cans or jars. Version without conveyor belt and with removable frame. The chamber can be installed on existing conveyor belts, allowing the shrink tunnel to be optimally integrated into your packaging line. Powerful air blowers ensure a smoothly shrinking of the labels without corrugations. - Specifications: Max. product size: Ø 140xH350mm; tunnel size: L1600xW150xH400mm; max. output: 200 containers/minute; power: 380V, 14kW; machine dimensions: L1600xW1005xH2100mm; weight: 350kg. Nledpev Nlxxsfx Anfea Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, I-, Z-, or L-shaped belt conveyor to transport small and large, wet, frozen products towards the weighing head unit. Open construction, corrugated sidewalls, water proof, parts in contact with the product are made of polyurethane and are certified to FDA 21 CFR 177.2600. - Specifications: dimensions of conveyor boxes: L(according to product requirements)xW250xH50mm; stainless steel frame; conveying speed: is adjustable; conveyor dimensions: L(depending on the gradient)W450xH2500mm. Nljdev Nml Hspfx Anfja That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Label shrink tunnel for shrinking labels on bottles, cans or jars. Basic version with conveyor belt. Powerful air blowers ensure a smoothly shrinking of the labels without corrugations. - Specifications: Max. product size: Ø 110xH250mm; tunnel size: L1500xW120xH300mm; max. output: 200 containers/minute; power: 380V, 14kW; machine dimensions: L1800xW600xH1665mm; weight: 250kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Njdpfsv Nlxfox Anfjla

Condition: used, 2400x1650 Nljdjyv E S Repfx Anfoa Vacuum feeder N° 2 bottom printing unit Rotary die cutter Stripper Stacker unit

Year of construction: 1984, condition: good (used), BOBST I 130 ER Automatic Die-Cutting Machine Year of manufacture: 1984 2. Sheet Formats Maximum sheet size: 920 x 1,300 mm Minimum sheet size: 450 x 580 mm Working format: – Max. 890 x 1,270 mm (open chase) – Max. 900 x 1,300 mm (closed chase) 3. Material Specifications Maximum board thickness: 1.5 mm (cardboard) Minimum grammage: 90 g/m² Gripper margin: 10 mm Nlsdpfxsycv Dve Anfoa 4. Chase Sizes – 915 x 1,300 mm chase without bar – 840 x 1,300 mm chase with bar 5. Pile Heights (Non-Stop Operation) Feeder pile height: Max. 1,500 mm with pallet Delivery pile height: Max. 1,400 mm with pallet Maximum pallet size: 900 x 1,300 mm 6. Equipment and Features – Suitable for carton and paper processing – Not suitable for corrugated board – Stripping possible using stripping frame and separation grid – EMS side lay system for alignment according to printed marks

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 410798, type of input current: three-phase, The Kraft VPS100/1500 is a high-precision, fully automatic carton cutting machine designed for flexible and efficient production of shipping and protective packaging from continuous corrugated board – ideal for companies with a wide range of small batch series or on-demand production. Its patented multi-tool system allows for creasing, perforating, and cutting in a single pass, both longitudinally via the processing roller and transversely via the integrated cutting bar. 🎛 Processing & Tools 6× multifunction tools for longitudinal processing 1× multifunction tool for transversal processing Creases are applied gently using creasing skids – reduces carton cracking Perforation via oscillating cutting knife, intensity adjustable Cutting with a serrated knife on a rubberized roller → low-fiber, tactile cut edge ⚙ Drive & Mechanics Maintenance-free, high-dynamic linear drives for precise feed Segmented top pressure for reliable carton feed 2 rubberized rollers as counter-cut and transport medium 📐 Technical Specifications Nlsdpfx Asx Emgusnfoa Max. working width: 1,500 mm Min. working length: 380 mm Board thickness: min. 1.5 mm (E-flute 1.3) max. 7.0 mm (BC-flute 2.7) Tool width: approx. 45 mm ➕ Carton Feed (Feed Stand) Max. stack height: 2,100 mm + 120 mm pallet Max. feed rate: 100 m/min Min. web width: 300 mm Max. web width (VPS 1500): 1,500 mm Total width "side by side": max. 1,350 mm 💻 Control & Software Hardware BECKHOFF industrial PC C6930 (Intel® Core™ i5-7500T, 2.7 GHz, 4 cores) 16 GB RAM, 240 GB SSD Windows 10 IoT Enterprise 21" multi-touch panel Control cabinet integrated into base machine Software features Multi-stage cut optimization Dynamic tool management Bidirectional multi-line processing User management (user, service, admin, Kraft) Comprehensive production, carton, and design management Message statistics, manufacturer documentation, training videos, service portal, etc. Documentation Operating manual in local language Circuit diagrams in German or English Spare parts drawings Other Equipment Standard interface for barcode scanner, file import (XML), database import Control panel mounted on swing arm, left side 🔄 Setup Times & Performance Changeover time with automatic carton changer: approx. 4.5 seconds Tool repositioning only: approx. 2.5 seconds The machine is delivered with multiple FEFCO formats and is production-ready immediately (e.g. 0201, 0331, 0403, 0410, 0412, 0421, 0401 incl. perforation) 🚚 Assembly, Transport & Year of Manufacture Demo and test machine year of manufacture 2019 Single-shift operation since 2022 Dismantling, packaging and delivery handled by seller Unloading requires 3.5-ton forklift with long forks 🎨 Colour Scheme Base machine: RAL 7015 (Slate Grey) & RAL 7035 (Light Grey) Safety fence: RAL 7015 Safety fence posts: RAL 7035 💡 Key Advantages of this Machine Very short setup times → ideal for flexible packaging production Low-fiber cut edges → reduced risk of injury & improved appearance Intuitive user interface Fully automatic, high-precision operation Immediately ready for use with included design templates Low-maintenance linear drives High process stability due to segmented top pressure

Condition: new, machine/vehicle number: ebf3f771e96394cd89e56bbb7, overall weight: 11,800 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis central axle trailer Welded fine-grained steel construction 6 pairs of lashing eyes bolted to the outside of the floor/outer frame, 5 tons each 2 pairs of lashing eyes additionally bolted to the floor, 5 tons each in the corners Gear support foot at the front Folding rear support 2 wheel chocks with holder Steel underride guard Rear spray flaps across the entire width Quarter-shell mudguards Njdpfx Anei Rixrjfjla 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) Towing device central axle trailer Towing bar with tested 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles + suspension Drum brake axles, manufacturer's choice Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 manufacturer's choice Factory silver steel rims Brake system 2-line compressed air brake system Hand spindle parking brake Integral air reservoir 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, Floor Steel/ checker plate floor for high point load capacity Note: Slight floor corrugation possible due to welding distortion! Platform length approx. 5,200 mm Rear sloping to approx. 900 mm Front wall / front corner stanchions 25 mm aluminum hollow profile, 400 mm high, Drop sides 25 mm aluminum hollow profile, 400 mm high, foldable and removable Rear wall / rear corner stanchions 1 pair of steel stanchions attached to the frame and with bracket for locking the drive-on ramps, drive-in width approx. 2,430 mm Drive-on ramps 2 steel ramps 2,300 mm long, 510 mm wide, can be moved sidewayswith grab handle on the ramps covered with 3 toothed steel rails With gas pressure jack for one-man operation Country of registration/plates Country of registration: Germany 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red on the rear Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Front wall aluminum Side wall anodized aluminium Drive-on ramps Hot-dip galvanized Attention! These are archive pictures.

Condition: new, machine/vehicle number: a3b1347da4aa7f31dceb875db, empty load weight: 2 kg, maximum load weight: 9 kg, overall weight: 11 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis central axle trailer Welded fine-grained steel construction 6 pairs of lashing eyes bolted to the outside of the floor/outer frame, 5 tons each Front gear support leg Folding rear support 2 wheel chocks with holder Steel underride guard Rear spray flaps across the entire width Quarter-shell mudguards Towing device central axle trailer Towbar with tested 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles + suspension BPW drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 manufacturer's choice Factory silver steel rims Brake system 2-line compressed air brake system Hand spindle parking brake Integral air reservoir 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, Floor Steel/ checker plate floor for high point load capacity Note: Slight floor corrugation possible due to welding distortion! Platform length approx. 5,200 mm Rear sloping to approx. 900 mm Front wall / front corner stanchions 25 mm aluminum hollow profile, 320 mm high, Drop sides 25 mm aluminum hollow profile, 320 mm high, foldable and removable Rear wall / rear corner stanchions 1 pair of steel stanchions attached to the frame and with bracket for locking the drive-on ramps, drive-in width approx. 2,430 mm Drive-on ramps 2 steel ramps 2 300 mm long, 510 mm wide, can be moved sidewayswith grab handle on the ramps covered with wood With gas pressure jack for one-man operation Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray10-year warranty against rusting through Front wall aluminum Side wall anodized aluminium Drive-on ramps Hot-dip galvanized Nledpfoi Ri Ilox Anfea Attention: Archive pictures!

Condition: new, machine/vehicle number: 8df1ead53cc82aeb51e50a37d, empty load weight: 4 kg, maximum load weight: 13,880 kg, overall weight: 18 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis Turntable Disposal Fine-grained steel welded construction Container locking system: - 2 pairs of locking hooks embedded in the floor - Pneumatic actuation The container locking mechanism is a 2-point design, acting from the inside, and locking of roll-off containers with an inner web is not possible (for transporting roll-off containers with a sub-frame in accordance with DIN 30722) Note! At the start of the roller recess at the front, the container must be pushed on completely flat! Longitudinal guide rails can be moved sideways and removed, rails approx. 115 mm high Turntable with strong ball bearing slewing ring 8 pairs of lashing mushrooms at the top and sides of the outer frame, 5 tons each Nedpei Ri Nuefx Anfola 7 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes, not included) 2 wheel chocks with holder Aluminum side bumpers Steel underride guard Quarter-shell mudguards according to EG with anti-spray flaps according to EG Towing equipment Trailer turntable Drawbar with tested 40 mm drawbar eye Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction of tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, floor Steel floor Roller recess for container recessed in the floor at the frontfor roll-off containers from 5,000 - 7,000 mm in length Note: Slight floor undulation possible due to welding distortion! Drive-on ramps Lockable storage space for loading ramps underneath the loading area Operating instructions A special permit is required for axle loads of 10,000 kg. Approval must be applied for individually in each federal state; the legislator does not have to grant approval for 20 t GG. Customer risk. The specified total weight is technically possible; depending on the load, the total weight may not be achieved while complying with the permissible axle/support and fifth-wheel loads. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Warning sign according to ECE - 70 Paint finish Frame DB 7350 nova gray 15-year warranty against rusting through Note: Bottom corrugation possible due to hot-dip galvanizing! Drawbar KTL black Attention: Archive pictures!

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 5668430QC5A, travel distance X-axis: 10,000 mm, torque: 4,000 Nm, TECHNICAL DETAILS Travel path X-axis: 10,000 mm Moment of inertia: 200 kg/m² Torque: 4,000 Nm Swivel moment: 10,000 Nm Clamping plate size: approx. 1,000 x 1,200 mm MACHINE DETAILS Power (welding wire feeder): 4 kW Power (Cloos QIROX-C QRC350): 40 kVA Nlsdpfjxgqy Ejx Anfja EQUIPMENT 2 welding positioners (left/right), Type: WPEK-25000N Rotary unit Welding robot, make: Cloos-Bauer, Type: BPF4001/2/4 Welding wire feeder, make: ESAP Extraction unit Rail-guided Separate welding units, make: Cloos, Type: GLC603 Quinto Separate control unit Corrugated sheet metal enclosure with 2 sliding doors

Condition: used, Year of construction: 2013, color: black, loading space width: 2,430 mm, loading space length: 3,980 mm, loading space height: 500 mm, mileage: 1,001 km, first registration: 01/2013, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel structure, doors, emergency stop, grab control, foldable, 2-point support mechanical, radio remote control, 2x hydraulic. Extensions Structure: Fassi F120B.2.24, rear crane mounting Roll-off container without crane, rear crane mounting foldable side walls/steel flaps, corrugated steel floor, load securing 4x lashing eyes per side Length 5,500mm Width: 2,400mm Nsdekq N Dzjpfx Anfsla Height: 500mm Storage compartment length: 2,410mm Storage compartment width: 250mm Storage compartment height: 430mm On request also with crane for an additional charge 6-20m/t 10,000.00 EUR - 28,000.00 EUR or crane 7-15m/t 22,000.00 EUR - 40,000.00 EUR ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - .

Condition: excellent (used), Year of construction: 2014, Straight-line, crash-lock, double-wall, 4-corner and 6-corner boxes. Condition: Perfect! Max. speed: up to 300 m/min; inching speed: 20 m/min Material thickness: up to 1200 g/m² for solid board and corrugated cardboard (E, C, B, AB flute – 3 or 5 layers), max. ~8 mm before folding, ~20 mm after folding Max. thickness of folded box: ~20 mm Modular construction & drives Each section independently driven by servo motor ("SmartServo system") Motorized linear guides for precise carrier transport and positioning Memory Job recall function for fast changeover between repeat jobs Machine sections – main functions: 1. Feeder Section – Friction feeder with adjustable vibrator, side gates, servo-driven, belts with suction feature, touchscreen panel, rear support for long blanks 2. Side Register Section – Aligns blanks to one side for perfect parallel feed; rapid setup; servo motor 3. Pre-folding Section (optional on AC/PC/SL models) – Pre-folder up to 180° (flap), pre-folder up to 135° (third crease), crease openers 4. Crash Lock Bottom Section – Hook and helix set for folding front flaps, adjustable hook tension, B-lock configuration, fast adjustment 5. Gluing Unit – One lower (left) and option for lower right glue tank; optional upper cold-glue system; easy removal and cleaning 6. Folding & Closing Section – Servo-driven outer belts (up to 180°), three full carriers (upper/lower), mini-box folder, service access 7. Trombone / Transfer Section – Independent drive, automatic belt tensioning, pneumatic squaring devices, box transfer system to press section 8. Press Section – Pneumatic/servo press section, manual/auto modes, length approx. 6.5 m (effective ~4 m), pressure adjustment, front squaring device 9. Back-folding Device (only in SL models) – Electronic, asynchronous system with two independent servo motors, easy setup for 4- & 6-corner boxes 10. Optional Scoring / Creasing Module – Servo-driven creasing section, placed before pre-folding, enables deeper scores Technical specifications 1450 SL: Machine length: from approx. 22.4 m (PC/SL) Width: approx. 2.23 m; Height: approx. 1.5 m Nljdsw H Nw Espfx Anfja Net weight: 15 tons Motor power: 40–45 kW; air supply (6 bar), consumption approx. 30 m³/h, glue tank ~155 L 🤝 Megafold Advantages • Material versatility: from thin solid board to heavy corrugated and multi-wall • Wide range of box styles: straight-line, crash-lock, double-wall, 4-corner, 6-corner • Modular and configurable design allows adaptation to specific production needs • Advanced automation and precision: servo drives, memory settings, operator radio-controller, touch HMI • Easy maintenance and cleaning due to modular components and operational access

Condition: excellent (used), Year of construction: 2019, Kolbus AutoBox AB year 2019 Nedpfxox El N Io Anfola machine for box production easy operation servo controlled quick job change suitable for corrugated boxes enables box-on-demand production MC MultiCut Module PR module many box types (FEFCO) scoring, cross and linear cutting, slitting incl. several equipment (glue, new knives) delivery section ready for use good condition available immediately

Year of construction: 2001, condition: good (used), Top closing stapler with clamping anvils. For coil staples. Closing of filled folding boxes made of single and double corrugated cardboard. Economical closing of corrugated cardboard boxes with joining and overlapping of flaps with clamping anvils. Suitable for single and double corrugated cardboard. Adjustable penetration depth to suit the type of carton. Ideally suited for use in packaging lines where a high degree of accessibility and efficiency must be ensured. - Housing made of hardened steel for long life. - Clamping anvils return immediately: up to 20 staple cycles/minute - 1,000 staples per coil: up to 10 times less frequent reloading compared to ordinary staplers For convenient operation, use a balancer in combination with a rotary arm system and a suitable spiral hose. See > accessories. MEROLOCK pneumatic stapler - For CR 1/34 spiral staples, arm length 18 mm, Nedpfxsva Nq Ho Anfola - with sound suppressor - With automatic return of the crimping anvil. - The clamping anvils are specially hardened to extend their life.

Condition: as good as new (ex-display), Year of construction: 2005, functionality: fully functional, Wellmatic Packaging Machine (as new) Suitable for books, brochures, CDs, DVDs, catalogues, spare parts, etc. Utilizes self-adhesive corrugated rollboard. Package length is automatically adjusted to the product length, which is electronically measured at the infeed. The maximum output of the Wellmatic—up to 35 packages per minute—depends on optional equipment such as product feeders, labelling units, as well as staffing and product type. The machine was only used for demonstration purposes by Dostal Maschinenbau GmbH and accordingly has very low operating hours. Equipped with Siemens Simatic OP7 (7-DP) control panel, Simatic S7-300 controller, and 2 Lenze frequency inverters with Profibus-DP. Both automatic and manual modes are possible. Outfeed conveyor: length 1,400 mm, working height 920 mm. Infeed conveyor: length 1,070 mm, adjustable working height from 940–985 mm; maximum package/roll width: 450 mm; maximum package thickness: 75 mm; maximum product width approx. 350 mm. The machine features a portable, demountable base frame with a height of 160 mm (to be added to the stated working height). Nlsdpfxot S Nr Rs Anfsa Price negotiable.

Condition: good (used), functionality: fully functional, Kerma Manual Die-Cutting Platen Nodpfxst S Rlfs Anfola Year of manufacture: 1979 Weight: approx. 2.5 t Inner frame width: 485 mm (height) x 640 mm (width) Cutting area: 520 mm (height) x 660 mm (width) No TÜV (safety certification) Processable materials: Corrugated board, B and C flute Solid board up to 2 mm (cutting and creasing) up to approx. 1000 g/m² For TÜV certification, safety switching mats must be retrofitted. A lot of accessories (at least 10 die frames) Terms of delivery: Self-collection from location in Germany, not dismantled, not packaged Price: negotiable

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, Machine for the production of paper pallets. Machine parameters: Pallet sizes: from 400x600 mm to 1200x2600 mm Leg sizes: 180x90, 140x90, 90x90 mm Leg height: from 50 mm to 100 mm Nlodpfsykakvjx Anfja Deck: corrugated cardboard, honeycomb Deck thickness: from 5 mm to 40 mm Extensive database of standard IKEA-type pallets Simple generator for new pallet types Option to save already developed pallet designs Gluing efficiency: from 3 to 4.5 seconds per leg (depending on pallet size and leg type) Adhesive used: ecological water-based dispersion glue Pallet ready for use 10 minutes after gluing the legs! We are the manufacturer and designer of this machine – we can adapt many solutions to the customer's needs.

Condition: used, Göpfert Flexo-Folder-Gluer / Flexo-Printer-Slotter line, model EUROLINE EL 310 / Euro-Inline 310 E The machine is designed for the production of corrugated packaging and combines printing, creasing, slotting, folding, and gluing in a continuous inline process. It is highly suitable for medium to large production runs and offers a robust industrial construction with versatile automation features. Comprising: - Feeder - Flexo printing units (2 units) Nlodpfex Thxzex Anfea - Slotting unit (motorized/SLM) - Rotary die-cutter - Folding/gluing section - Pre-set function - Strapping machine

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, working width: 4,800 mm, Descriptive Document of the Machinery “Bendazzoli NBB186/48 CE” Serial No.: 582 Corrugated Cardboard Packaging Production Machine 1. General Description: - Machine name: Printer Slotter - Model: NBB186-48 - Manufacturer: Bendazzoli Costruzioni Meccaniche - Year of Manufacture: 2001 - Year of Mechanical Overhaul: 2025 ° Slotter overhauled to as-new condition ° Partial printing unit overhaul (new anilox cylinder and rubber roller, new compensator, new bearings, new lubrication pump, overhauled ink feed pump) ° Partial feeder overhaul (new feeder wheels, new lubrication pump, main motor completely overhauled by CEAR, new CAM bearing) ° Static unit overhauled to as-new condition Complete sandblasting and repainting of all machine assemblies. - Year of Partial Electrical Overhaul: 2025 Includes replacement of: sensors / push button panels / onboard cabling / solenoid valves / electrical junction boxes for machine groups. 2. Technical Specifications: - Dimensions: Length 4800mm; Cylinder Circumference 1860mm - Speed: Maximum rotation 5,500 cycles/hour under optimal conditions - Minimum shaft center distance: 450mm - Sound pressure level (feeding area): 85dB (A) - Sound pressure level (delivery area): 82dB (A) - Electrical characteristics: Supply 400Vac Three-phase 3P+PE Nominal Power: 70KW Power Consumption: 57KW Nominal Current: 102A Operating Current: 82A - Production speed: approximately 5,000 boxes/hour in sync mode, approximately 2,500 boxes/hour in extended mode 3. Main Components: - Cronofit Feeder Table Group with automatic positioning of side guides and bundle support gate. - Printing Unit Group with automatic print presetting - Slotter Unit Group with extending and automatic presetting (knife heads) and carton height adjustment - Static Unit Group 4. Safety: - The machine is fitted with protective guards on all moving parts, equipped with sensors to detect guard opening. - Each machine group is provided with an emergency stop mushroom button and a rope pull switch to instantly halt group movements. 5. Electrical Equipment: - Main electrical cabinet housing all control and power distribution components Nlsdpfxsyifdve Anfoa - Operator control desk/console complete with touch screen panel 6. Components not included, for possible installation: - Cable tray and optional accessories - Command and power cables between cabinet/console/machine assemblies - Network bus cables -Price Negotiable Note: Possibility to purchase a Die-Cutter and Stacker (year 2008, requires overhaul)

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, For sale: Nikko N105XR automatic die-cutting machine. Robust Japanese construction, ideal for packaging plants producing solid board and corrugated cardboard packaging. Key features: Automatic die-cutting machine for box production Application: cutting elements for packaging and cartons Suitable for corrugated and solid board Heavy-duty industrial build – high reliability Proven technology from the renowned manufacturer Nikko Machine specifications: Manufacturer: NIKKO MFG. CO., LTD. (Japan) Nodpfx Anoyk Dmzsfola Model: N105XR Year of manufacture: 2001 Type: Box Converting Machine / Automatic Die-Cutter The machine is available immediately. More information and technical documentation available upon request.