Used Corrugator for sale (316)

Condition: new, machine/vehicle number: ebf3f771e96394cd89e56bbb7, overall weight: 11,800 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis central axle trailer Welded fine-grained steel construction 6 pairs of lashing eyes bolted to the outside of the floor/outer frame, 5 tons each 2 pairs of lashing eyes additionally bolted to the floor, 5 tons each in the corners Itedpfx Adei Rixrsdsb Gear support foot at the front Folding rear support 2 wheel chocks with holder Steel underride guard Rear spray flaps across the entire width Quarter-shell mudguards 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) Towing device central axle trailer Towing bar with tested 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles + suspension Drum brake axles, manufacturer's choice Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 manufacturer's choice Factory silver steel rims Brake system 2-line compressed air brake system Hand spindle parking brake Integral air reservoir 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, Floor Steel/ checker plate floor for high point load capacity Note: Slight floor corrugation possible due to welding distortion! Platform length approx. 5,200 mm Rear sloping to approx. 900 mm Front wall / front corner stanchions 25 mm aluminum hollow profile, 400 mm high, Drop sides 25 mm aluminum hollow profile, 400 mm high, foldable and removable Rear wall / rear corner stanchions 1 pair of steel stanchions attached to the frame and with bracket for locking the drive-on ramps, drive-in width approx. 2,430 mm Drive-on ramps 2 steel ramps 2,300 mm long, 510 mm wide, can be moved sidewayswith grab handle on the ramps covered with 3 toothed steel rails With gas pressure jack for one-man operation Country of registration/plates Country of registration: Germany 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red on the rear Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Front wall aluminum Side wall anodized aluminium Drive-on ramps Hot-dip galvanized Attention! These are archive pictures.

Condition: new, machine/vehicle number: a3b1347da4aa7f31dceb875db, empty load weight: 2 kg, maximum load weight: 9 kg, overall weight: 11 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis central axle trailer Welded fine-grained steel construction 6 pairs of lashing eyes bolted to the outside of the floor/outer frame, 5 tons each Front gear support leg Folding rear support 2 wheel chocks with holder Steel underride guard Rear spray flaps across the entire width Quarter-shell mudguards Towing device central axle trailer Towbar with tested 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles + suspension BPW drum brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5 manufacturer's choice Factory silver steel rims Brake system 2-line compressed air brake system Hand spindle parking brake Integral air reservoir 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, Floor Steel/ checker plate floor for high point load capacity Note: Slight floor corrugation possible due to welding distortion! Platform length approx. 5,200 mm Rear sloping to approx. 900 mm Front wall / front corner stanchions 25 mm aluminum hollow profile, 320 mm high, Drop sides 25 mm aluminum hollow profile, 320 mm high, foldable and removable Rear wall / rear corner stanchions 1 pair of steel stanchions attached to the frame and with bracket for locking the drive-on ramps, drive-in width approx. 2,430 mm Drive-on ramps 2 steel ramps 2 300 mm long, 510 mm wide, can be moved sidewayswith grab handle on the ramps covered with wood With gas pressure jack for one-man operation Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray10-year warranty against rusting through Front wall aluminum Itsdpfx Aei Ri Iloddjb Side wall anodized aluminium Drive-on ramps Hot-dip galvanized Attention: Archive pictures!

Condition: new, machine/vehicle number: 8df1ead53cc82aeb51e50a37d, empty load weight: 4 kg, maximum load weight: 13,880 kg, overall weight: 18 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis Turntable Disposal Fine-grained steel welded construction Container locking system: - 2 pairs of locking hooks embedded in the floor - Pneumatic actuation The container locking mechanism is a 2-point design, acting from the inside, and locking of roll-off containers with an inner web is not possible (for transporting roll-off containers with a sub-frame in accordance with DIN 30722) Note! At the start of the roller recess at the front, the container must be pushed on completely flat! Longitudinal guide rails can be moved sideways and removed, rails approx. 115 mm high Turntable with strong ball bearing slewing ring 8 pairs of lashing mushrooms at the top and sides of the outer frame, 5 tons each 7 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (can be converted to 5 to. ring lashing eyes, not included) 2 wheel chocks with holder Aluminum side bumpers Itedpfx Aei Ri Nusddjb Steel underride guard Quarter-shell mudguards according to EG with anti-spray flaps according to EG Towing equipment Trailer turntable Drawbar with tested 40 mm drawbar eye Axles + suspension SAF drum brake axles Axle/chassis laser-measured Reduction of tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings Wheels and tires 235 / 75 R 17,5 at the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, floor Steel floor Roller recess for container recessed in the floor at the frontfor roll-off containers from 5,000 - 7,000 mm in length Note: Slight floor undulation possible due to welding distortion! Drive-on ramps Lockable storage space for loading ramps underneath the loading area Operating instructions A special permit is required for axle loads of 10,000 kg. Approval must be applied for individually in each federal state; the legislator does not have to grant approval for 20 t GG. Customer risk. The specified total weight is technically possible; depending on the load, the total weight may not be achieved while complying with the permissible axle/support and fifth-wheel loads. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Warning sign according to ECE - 70 Paint finish Frame DB 7350 nova gray 15-year warranty against rusting through Note: Bottom corrugation possible due to hot-dip galvanizing! Drawbar KTL black Attention: Archive pictures!

Condition: good (used), Year of construction: 2013, Operating hours: only 14,500 - Format size – max. 750 x 1050 mm, min. 350 x 400 mm - Net die cutting area: 727 x 1050 mm - Materials: - Paper, min. 80 g/m² - Cardboard & solid board, up to 1400 g/m² - Corrugated board (B-flute) up to 4 mm - Die cutting pressure, max. 300 tons - Speed, max. 7,500 sheets/h - Pile height at feeder: 1000 mm (non-stop) Equipment & features: - Fully automatic die cutting, creasing, and embossing machine - Touch screen control panel - Stripping station for internal waste as well as side and rear edges - Centerline system - Small format device: minimum 300 x 350 mm - Non-stop automatic sheet feeder with pre-piling system - Non-stop standard delivery Itjdpfsx R Tiajx Addsb - Register system in feeder and die cutting station - Mechanical double sheet detector - Side lays on operating and drive side, switchable between pull and push lay - Four active front lays with sensors for sheet infeed control - Independent fine adjustment of front lays for drive and operator sides - Gripper margin adjustable, 10–18 mm - Delivery section with gripper margin removal - Stripe inserter in the delivery - Centralized and automatic chain lubrication - Two standard stripping frames - Two die cutting chases - Die cutting plate, 5 mm - Screw compressor Varimatrix 105-CS Note: All technical terms and specifications are provided as per industry standards for machinery listings in the printing and packaging sector.

Year of construction: 2003, condition: used, functionality: fully functional, GÖPFERT Corrugated Board Processing Machine SRE mini DE Year of manufacture: 2003 The machine performs the following processes: • Automatic sheet feeding • Longitudinal and cross cutting • Longitudinal and cross creasing • Slotting • Auxiliary die-cutting • Printing Equipment: - ANS 2/4500 feeder - Pneumatic tool clamping - Printing unit Itsdpfxswzmc Ie Addeb - Belt extraction table - Siemens S7 control system Format: Max. sheet width: 1,400 mm Min. sheet width: 400 mm Max. sheet length: 4,000 mm Min. sheet length: 650 mm Material thickness: 2–7 mm Slot depth: 0–1,400 mm Slot width: 8 mm Max. die-cutting area: 90 x 1,400 mm Output: Max. 1,200 pcs/h

Condition: used, Year of construction: 2010, We have here a KIRK-RUDY KR215 inkjet mailtable and a KIRK-RUDY KR435 mini tabber available. Inkjet mailatble is year 2008 and the mini tabber year 2011. Iedpfx Aex Ag Tmeddotb KR215 Inkjet base description Feed and convey a wide variety of products using the KR 215. Used with most major brands of inkjet printing and pressure-sensitive labeling equipment, the KR 215 is the ideal feed and transport solution for your offline coding, addressing and labeling needs. The KR 215 is perfectly suited for handling all kinds of direct mail pieces as well as flat chipboard and corrugated cartons. A fully adjustable hopper quickly and easily adjusts for a full range of product sizes from single sheets to broadsheet newspapers. It’s “load from the top, feed from the bottom” design keeps jobs running non-stop. KR435 mini tabber: Product Specification The KR435 handles large 40cm diameter rolls and runs all major types of tabs as well as pressure sensitive stamps and labels of various shapes and sizes. Key features like side register belts, side to side top plate adjustment and automatic tab sensor setup keep the tabbing process consistent and reliable.

Condition: excellent (used), Year of construction: 2016, As good as new machine for the production of corrugated cardboard honeycomb. New price €600,000.00 Itodpetqpd Hefx Addeb

Condition: used, Plastic Boxes Made of Corrugated Plastic | GWP Group | €1 / unit | 300 units per pallet For sale: high-quality plastic boxes made of corrugated plastic from manufacturer GWP Group, material Correx. Ideal for use as storage bins, picking crates, stackable boxes, and open-front storage bins. Features: ✔ Moisture resistant ✔ Oil and dirt resistant ✔ Load capacity up to 5 kg ✔ Lightweight, robust, and durable Technical Data: Dimensions: 425 × 366 × 310 mm Material: Corrugated plastic Condition: used, clean Packaging: 300 units / 1 Euro pallet Price: €1 net per unit Block: 30 units (6 rows) Isdpfxjx Tgz Is Addetb Pallet: 300 units Delivered disassembled, palletized Suitable applications: • Warehouse • Logistics • Order picking • Workshop • Production • Shipping Collection: 97514 Oberaurach Delivery available by arrangement Larger quantities available Keywords: plastic boxes, storage bins, open-front bins, stacking boxes, picking crates, corrugated plastic boxes, storage containers, logistics boxes

Condition: good (used), Iijima’s excellent, fast-running JF-1030, year of manufacture 1991, modified to Bobst stripping tooling Machine number: 8061 Year of manufacture: 1991 Stripping station made compatible for/with Bobst stripping pins and mounting rails Sector segment now driven by a dual set of cam gears instead of the previous triple system, resulting in smoother and vibration-free improved carriage operation. Chains replaced in May 2023 Gripper carriages have been repaired where needed but not replaced; current register tolerance at the front lay with rigid board types is < 0.15mm Electromagnetic clutch (24 VDC, Warner) replaced in May 2023, as well as all roller bearings on this shaft, including those in the casing just before and after the worm gear. Oil seals replaced Oil casings flushed and thoroughly cleaned for conversion from mineral to fully-synthetic oil. Absolutely no foaming, quieter operation. Dismantling as of 23/12/2025; then available for sale ex-warehouse Van Rooij For the end user: can be supplied including installation, transport, and warranty. Other specs according to manufacturer’s brochure; Technical Specifications – Flatbed Die Cutting Machine Materials - Paper from 80 g/m² - Solid fibre board / cardboard up to 2000 g/m² - Corrugated board up to 4 mm, depending on material quality and cutting layout Sheet Sizes & Formats - Maximum sheet size: 750 × 1050 mm - Minimum sheet size: 350 × 400 mm - Maximum cutting form size: 745 × 1070 mm - Maximum cutting surface: 730 × 1030 mm Itjdpfx Aox Ndu Dsddeb - Inside chase dimension: 750 × 1050 mm Performance - Maximum cutting pressure: with maximum sheet size - Maximum speed: up to 5,000 sheets/hour - Gripper margin: adjustable - Standard rule height: 8 – 12 mm Pile Data Feeder pile: - Height (incl. pallet): 1,200 mm - Weight (incl. pallet): 1,000 kg Delivery pile: - Height (incl. pallet): 1,080 mm - Weight (incl. pallet): 1,000 kg Auxiliary piles: - Feeder auxiliary pile height: 450 mm - Feeder auxiliary pile weight: 450 kg - Delivery auxiliary pile height: 800 mm - Delivery auxiliary pile weight: 800 kg Machine Dimensions & Weight - Length without feeder: 4,540 mm - Length with feeder: 5,810 mm - Width: 2,350 mm - Height: 2,100 mm - Machine weight: 15,000 kg - Feeder weight: 1,000 kg Electrical & Air Requirements - Power supply: 3-phase AC - Main motor output: 15 kW - Machine connected load: 32.4 kVA - Required compressed air: 6 bar - Air intake volume: approx. 30–50 l/min Additional Information - Heavy-duty industrial construction - Designed for continuous professional die-cutting production - Specifications subject to alteration

Condition: excellent (used), Year of construction: 2001, Ref: 10900 . 2001 Bobst SP102-BMA Foilmaster Excellent condition! Only 33,000 hours worked! Equipped with: Fully Automatic Feeder Itjdpfx Adeu Snwmjdeb Double Sheet Control Centre Line Hot Foil Unit 2 x honeycomb chase 2 x die cutting chase 16 Independent Heating Zones Foil Advance Shafts Automatic Delivery Elevated (High Pile) Specification: Sheet Format Max: 720mm x 1020mm Sheet Format Min: 350mm x 400 mm Working Material Paper/Solid Board: 80-2000gr Corrugated Board: "E" and "B" - max. 4mm Gripper margin: 9-15mm Stamping Format: Max 680mm x 1010mm Max speed: 7,500 p/h

Condition: used, Göpfert Flexo-Folder-Gluer / Flexo-Printer-Slotter line, model EUROLINE EL 310 / Euro-Inline 310 E The machine is designed for the production of corrugated packaging and combines printing, creasing, slotting, folding, and gluing in a continuous inline process. It is highly suitable for medium to large production runs and offers a robust industrial construction with versatile automation features. Comprising: Iodpfxex Thxze Addetb - Feeder - Flexo printing units (2 units) - Slotting unit (motorized/SLM) - Rotary die-cutter - Folding/gluing section - Pre-set function - Strapping machine

Year of construction: 2001, condition: good (used), Top closing stapler with clamping anvils. For coil staples. Closing of filled folding boxes made of single and double corrugated cardboard. Economical closing of corrugated cardboard boxes with joining and overlapping of flaps with clamping anvils. Suitable for single and double corrugated cardboard. Adjustable penetration depth to suit the type of carton. Ideally suited for use in packaging lines where a high degree of accessibility and efficiency must be ensured. - Housing made of hardened steel for long life. - Clamping anvils return immediately: up to 20 staple cycles/minute Iodpfx Asva Nq Hoddstb - 1,000 staples per coil: up to 10 times less frequent reloading compared to ordinary staplers For convenient operation, use a balancer in combination with a rotary arm system and a suitable spiral hose. See > accessories. MEROLOCK pneumatic stapler - For CR 1/34 spiral staples, arm length 18 mm, - with sound suppressor - With automatic return of the crimping anvil. - The clamping anvils are specially hardened to extend their life.

Condition: excellent (used), TruTool PN 200 electric hand cutting machine Product features The new TruTool PN 200 vibrating shear is mainly used for cutting C-L-U sections, trapezoidal sheet metal, etc. components. The device with a short tool for processing sheet metal with a profile depth of up to 85 mm and for C-L-U sections. Also for corrugated sheet metal. Ideal for hard-to-reach places. The working direction can be adjusted 360° easily and without tools in 45-degree steps. Minimized set-up time Replacement of punch and yoke without interruption and without tools. Unmatched speed Fast and efficient, 2.1 meters per minute at 400 N/mm2 structural steel. Application: Trapezoidal sheet metal For cutting profiles up to 86 mm deep and 132.5 / 40 mm wide. For straight and diagonal cuts. Profiles For cutting C-L-U profiles. Corrugated sheet For cutting and slitting. For bevel cuts and internal and radial cuts. - MAXIMUM SHEET THICKNESSES: - MAXIMUM THICKNESS OF 400 N/MM² STEEL SHEET: 2 mm. Itedpfx Ajuhm E Seddsb - MAXIMUM THICKNESS OF STEEL 600 N/MM²: 1.5 mm - MAXIMUM THICKNESS OF STEEL SHEET 800 N/MM²: 1 mm - MAXIMUM THICKNESS OF SHEET METAL MADE OF ALUMINUM UP TO 250 N/MM²: 3 mm - RADIANCES: - LOWEST RADIUS: 50 mm - GENERAL INFORMATION: - OPERATING SPEED: 2.1 m/min. - NUMBER OF SHAKES AT NOMINAL LOAD: 1500 1/min. - INITIAL HOLE DIAMETER: 24 mm - RATED POWER CONSUMPTION: 550 W

Condition: used, Year of construction: 2000, The Stock A-14 V567A/1650P is a high-speed laminating machine designed specifically for the packaging industry. It integrates advanced technology to efficiently laminate various materials, providing enhanced durability and protection to packaging products Format: 1640 x 1640 mm Equipment: Feeder: Edge Feeder (MIRUS) Sheet feeder by carrier chains Press Station Speed: 3,000 cycles/h Control device: Siemens SPS-Control / Micro Control System Gluing Station Laminating Station Technical Details Size max: 1640 x 1640 mm Size min: 500 x 500 mm Sheet weight: Cardboard 100 - 800 g/qm Infeed height: 1,400 / 1,800 mm Carrier Sheets: one-sided corrugated board, E/B- and F-Flute, two-sided corrugated board up to 7 mm thickness cardboard from 0.5 mm thickness Ijdpfxowcqwxs Addotb

Condition: used, Year of construction: 1990, The Jagenberg 185-1, manufactured in 1990, is a machine with a format of 1850 mm, currently in stock and located in Germany. It is designed for working with corrugated board and features various shaft configurations (F/E/EE/EB/BE). The machine supports different gluing methods, including 3-point, 4-point, and special gluing. It has a minimum working width of 215 mm and a maximum of 1850 mm, with an insertion range from 150 mm to 1200 mm. After gluing, the working width ranges from 140 mm to 1000 mm. The machine also features motorized format adjustment and a folding base. The delivery terms are FCA. Format: 1850 mm Equipment: Working width min/max 215 mm / 1850 mm Working width after gluing min / max 140 mm / 1000 mm Insertion min / max 150 mm / 1200 mm 3 point / 4 point / special binding F/E/EE/EB/BE corrugated / solid cardboard Straight line glue Ijdevfxpvspfx Addjtb folding bottom Motorized format setting

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 6,400 mm, total length: 7,800 mm, total height: 2,500 mm, overall weight: 30,000 kg, New machine Machine for punching, embossing, waste stripping and depaneling Specification: Sheet format max. 830 x 1,150 mm Sheet size min. 450 x 550 mm Maximum punching force 3.0 MN (300t) Speed 7,000 Bg/h Processable materials: Paper min. 80 g/m² Cardboard up to 2,000 g/m² Corrugated cardboard up to 4 mm Features: manual non-stop feeder Automatic pile alignment at the feeder 10" inch display at the feeder Automatic non-stop roll cloth in the feeder Isdpet H Nhhsfx Addotb stripping station Blank separating station Centerline Automatic separating sheet inserter to stabilize the panel stacks Quick-clamping frame stripper upper tool and central stripping board Quick-clamping frame blanking station upper and lower tool Pneumatic clamping frame and punching plate lock APC 1 - automatic punching pressure system APC 2 - platen tilting at the platen exit 1x 4mm cutting plate incl. 10x 1mm cutting plates 2x 5mm cutting plate 1x Quicklock clamping frame 2x clamping frame without Quicklock QTM fine adjustment of cutting plate Sheet monitoring in each station with 2 sensors Incl. platform 1 tool set (Bobst system) Delivery time: 6-8 months

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 4,390 mm, total length: 6,334 mm, total height: 2,465 mm, overall weight: 30,000 kg, New machine Machine for punching, embossing, waste stripping Itsdpfx Ast H Nc Sjddeb Technical data: Sheet format max. 830 x 1,150 mm Sheet format min. 450 x 550 mm Maximum punching force 3.0 MN (300t) Speed 7,000 Bg/h Materials that can be processed: Paper min. 80 g/m² Cardboard up to 2,000 g/m² Corrugated cardboard up to 4 mm Features: Automatic non-stop roll cloth in the delivery Stripping station Centerline Quick-clamping frame stripper upper tool and central stripping board Pneumatic clamping frame and punching plate lock APC 1 - automatic punching pressure system APC 2 - platen tilting at the platen exit 1x 4mm punching plate incl. 10x 1mm punching plates 2x 5mm cutting plate 2x clamping frame without Quicklock Incl. platform 1 tool set (Bobst system) Delivery time: 6-8 months

Condition: new, Year of construction: 2026, functionality: fully functional, Think Green, Box On Demand – monitor your carbon footprint. Carton Cutting Machine Type Vision 2800 Automatic for processing endless corrugated board from the stack Machine Description: The machine listed here belongs to the series of static operating machines, i.e. the processing operations across the width of the machine are performed while the cardboard is at rest. The machine is designed for high productivity. The maximum working width of the carton is 2,800 mm. All tool settings are performed automatically. 1) Main Machine Body (Carton Cutting Automat): - Linear cross-cutting unit for head-to-foot cutting and cross scoring of the cardboard - 1 linear cross-creasing unit for transverse creasing of the cardboard (supplied as cross creaser, cross creaser with perforation option) - 7 longitudinal creasing units from above for longitudinal creasing of the cardboard - Longitudinal cutting units for performing the longitudinal cuts 2) 4-Compartment Carton Magazines Itjdpfox Ncwwsx Addeb - 5 carton magazines provide supply and feed of raw corrugated board to the processing machine - Stack height of endless corrugated up to max. 1,400 mm possible 3) Control Cabinet, Controls, Electronics: - Contains all components required for operating and controlling the system. Control cabinet components are Siemens-based. The machine will be available from mid-January 2026.

Condition: good (used), Year of construction: 2021, Automatic folding carton gluing machine Manufacturer: Eterna Model: Efold 1100 Elite Year of manufacture: 2021 Suitable for micro-flute corrugated board and cardboard Cardboard: 200-800 g/m² Corrugated board: N / E / F flute Belt speed: 320 m/min (420 m/min as option) Jogging speed: 20 m/min Main motor: 11 kW Overall dimensions: 12.7 x 2.6 m Total weight: 7 t Max. blank width: 1100 mm Iedpevxvgxjfx Addotb Including ERO-TE high-pressure gluing system for folding carton gluers 4 cold glue nozzles 101225ä

Condition: used, Year of construction: 2024, color: grey-black, empty load weight: 2 kg, first registration: 10/2024, fuel type: gasoline, gearing type: mechanical, TITLE: USED 20-FOOT HOIST PLATFORM WITHOUT SIDES FOR TRANSPORTING GOODS AND MARITIME CRATES WITH TWIST LOK PREPARED WITH ATTACHMENTS FOR ADDITION OF SIDES AND CENTRAL PILLARS, REINFORCED BOTTOM IN THE FRONT AND CENTRAL PART REF: 24-U-150 TYPE: platform without sides NEW: no COVER: no OPENING: all sides Itsdpfxjv Ap Uds Addjb OVERALL DIMENSIONS TOTAL LENGTH: 7.10 m + 0.20 m EXTERNAL WIDTH OF THE CASE: 2.53 m FRONT SIDE: 1.80 m in TR1 WEIGHT: 2260 kg BOTTOM: 5 + 2 mm in wood with corrugated iron cladding WALL FROM : / COLOR : white Subject to errors and/or omissions The prices shown do not include VAT. Please contact the sales representative for an updated comparison of prices and conditions. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sector of the sale and purchase of industrial and commercial vehicles specialized mainly in the waste sector. Specialized in trucks, trailers and hook-lift equipment. With a fleet of vehicles ready for delivery of over 50 trucks and over 150 skips, containers with and without hook-lift cranes. S.E.&O Given the quantity of advertisements and details entered, Aurora invites you to verify the correctness of the data entered with the sales staff.

Year of construction: 2024, condition: like new (used), Great die-cutter (easy to operate), simpler than a cylinder :) automatic die-cutter Max. paper size: 1060 x 760 mm Min. paper size: 400 x 370 mm Max. die-cutting size: 1050 x 750 mm Iodeyarb Sspfx Addetb Speed up to 7,500 sheets/hour Max. die-cutting force: 300 t Max. sheet thickness: corrugated board up to 4 mm, cardboard 0.1 - 1.5 mm

Year of construction: 2004, operating hours: 37,800 h, condition: like new (used), functionality: fully functional, Top maintained high premium die cutter for fast setup and TOP quality jobs Technical data: Paper up to 70 gsm Cardboard up to 1000 gsm Corrugated board up to 2 mm Max. format: 1060 x 760 mm Min. format: 400 x 350 mm Press force: 260 t Speed up to 9,000 sheets/hour Equipment: Stripping station Optical register control Automatic pile alignment Ultrasonic double sheet control Centerline Microplate Iedpfx Adoyaq S Ajdstb Plate 4 mm 2 closed frames Non-stop delivery Alignment table Height raised by 220 mm

Condition: used, L: 1240, W: 1045, H: 680 (mm). Product: Stacking box steel. Type: Fixed construction. Version: With front opening. Isdpfx Adowprz Sedetb Material: steel. Walls: corrugated steel plate. Floor: profiled steel. Euronorm (mm): 1200 x 1000. Colour: green. Surface treatment: painted. Internal length (mm): 1120. Internal

Condition: used, L: 950, W: 550, H: 600 (mm). Product: Stacking box steel. Type: Fixed construction. Version: With four closed walls. Itsdpfxjx Aht Ue Addeb Material: steel. Walls: corrugated steel plate. Floor: profiled steel. Euronorm (mm): none. Colour: various. Surface treatment: rusty. Internal length (mm): 770. Internal width

Condition: reconditioned (used), Year of construction: 2020, Agfa Tauro H3300 LED Manufacturing Year: 2020 Mileage: 1.1 million m² (low mileage for such technology. Colour configuration: Six colours (CMYKLcLm) + White Options: Master roll (85.000€ from origin) up to 700KG In and out tables RIP: ASANTI Available: November 2025 The Agfa Jeti Tauro H3300 is a hybrid inkjet printer with speeds up to 650 m²/h, capable of printing on both rigid and flexible media like vinyl, cardboard, and wood. It offers up to 1200 dpi resolution, multiple color configurations (including optional white, primer, and varnish), and various automation options to support 24/7 production. Key specifications Itjdpsxwbdcjfx Addjb Printing speed: Up to 650 m²/h Media compatibility: Prints on a wide range of rigid and flexible media including: Rigid: Corrugated cardboard, wood, glass, polystyrene, foam board, PVC, etc. Flexible: Self-adhesive vinyl, canvas, PET foils, coated paper, backlit films, etc. Print heads: Piezoelectric Ricoh MH5420 print heads Image quality: Up to 1200 dpi resolution Color options: CMYK 6-color (including white) Optional primer, varnish, and white ink Automation: Multiple options are available, from manual loading to full automation (available as an option) Maximum media width: 3.34 m (131.49 in) Maximum media length: 4.0 m (157.48 in) for the base engine For further technical information please refer to enclosed brochure Installation in Europe available upon request