Used Crucible Oht for sale (50)

Condition: good (used), Heidelberg OHT „windmill” Letterpress Machine for die cutting, printing, creasing, perforating numbering, etc. The condition of the machine is very good, after inspection. 100% original, without modifications. This is a machine from the end of production, the distinguishing feature of this version is the exclusive roller paws, a drawer under the machine and a large wheel protection cover, a red knob on the piston lever. Ink system. Full set of accessories and tools. Machine format 26x38cm Weight 600gsm Dodpfxjztn Rne Apbecn Speed ​​5000 sheets/h Weight 1200kg Power supply 400V Fully complete, two frames, spare elements, documentation included. A very rare machine on the market.

Condition: excellent (used), The ZEVATRON HTT 75/300 is a professional soldering station designed for automatic dip soldering of electronic components, wires, and sub-assemblies that require a repeatable soldering process. The unit is equipped with two independent soldering pots with electronic temperature control, an automatic working manipulator, and a control panel with a touch screen for programming operating parameters. The machine was manufactured in Germany in 2016 and is used in the production of electronics, research and development laboratories, and industrial plants. The working enclosure is equipped with a protective cover and a port for connecting a fume extraction system. Technical specifications: Manufacturer: ZEVATRON GmbH Model: HTT 75/300 Type: Tischlötautomat (automatic soldering station) Year of manufacture: 07/2016 Power supply: 230 V / 50 Hz Power: 920 W Rated current: 4.0 A Two independent soldering pots (Soldering Bath A and Soldering Bath B) Two electronic temperature controllers Operator panel with touch screen Programmable operating parameters Automatic manipulator for immersing parts Dcsdszmap Ajpfx Apbsn Emergency stop button (E-STOP) Port for connecting a fume extraction system Operating manual included

Condition: excellent (used), Year of construction: 1970, functionality: fully functional, STC-Ref: G-022-7647 Heidelberg OHT A4, Hot Foil Stamping, Year: 1974 format: 260x380 mm, 1 colors Dcodpsz Ay Udsfx Apbon equipped: - foil stamping and embossing - hot foil stamping device (embossing) - grey model - heating plate --> available: 11/2026

Condition: used, Year of construction: 2001, operating hours: 18,250 h, functionality: fully functional, machine/vehicle number: 6097/01, type of input current: three-phase, total height: 2,000 mm, total width: 3,000 mm, total length: 5,000 mm, control cabinet height: 2,000 mm, control cabinet length: 800 mm, control cabinet width: 600 mm, input voltage: 380 V, temperature: 950 °C, control voltage: 220 V, input current: 30 A, input frequency: 50 Hz, overall weight: 2,500 kg, Equipment: documentation/manual, Morgan gas electric tilting aluminium oven type GE60, platform and Foseco rotor degasser. Dsdpfx Aezhad Ajpbecn Year 2001 and 18400 operating hours. Melting capacity: 500kg aluminium Comes with 1 extra graphite crucible and stand.

Condition: used, Year of construction: 1961, colour units 1 max. printing speed sheets 5500 /h max. paper size 26 x 38 cm Dcjdpfxezpf T Ej Apbjn serial no. 132.756

Condition: used, Year of construction: 1973, The Heidelberg OHT, manufactured by Heidelberg in 1973, is a robust machine designed for printing and die-cutting operations. With a format of A4, it is currently in storage in Germany. Identified by the machine number T 184634 H, this press has a punching force of 40 tons and can handle a minimum format of 40 x 70 mm. It operates at a speed ranging from a minimum of 2,200 revolutions per minute to a maximum of 5,500 revolutions per hour. The machine includes a skeleton chase of 260 x 350 mm and a standard chase of 260 x 340 mm, with a maximum format of 260 x 380 mm. It comes complete with accessories and a closing frame, and features a letterpress platen and a die-cutting platen. The delivery condition is FCA. Format: A4 Speed: 5500 Power: 380 V 1,25 KW Net Weight: 1100 KG Measurements: L1,68 x B1,24 x H1,85m Equipment: Skeleton chase: 260 x 350mm Speed min.: 2.200 sph - max. 5.500 sph Dsdpfx Aevfxu Eepbocn Size max. 260 x 380 mm Letter Press Tiegel - DIE Cutter Punching force 40 tons Complete with tools and accessories include frame Standard chase: 260 x 340mm Machines No T 184634 H

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 13276/1694, type of input current: three-phase, total height: 2,500 mm, total width: 3,000 mm, total length: 5,000 mm, input voltage: 380 V, control voltage: 24 V, input current: 250 A, input frequency: 50 Hz, Equipment: documentation/manual, Inductotherm 150 kW induction furnace; comes with 3 new crucibles. Aluminum capacity: 60 kg, melting time: 30 min. Bronze capacity: 200 kg, melting time: 60 min. Dcjdpfjzfif Rjx Apbsn

Condition: good (used), Year of construction: 1997, punching force: 350 t, overall weight: 4,500 kg, input voltage: 380 V, input frequency: 50 Hz, Die cutting press TMZ Type L122, year 1997, format 93x126 cm, punching force 350 tons, speed 1400 cycles/hour, quick-clamping frame, safety foot mats, in good condition, immediately available. Djdpfx Ajx Dilhepbecn

Condition: good (used), machine/vehicle number: 160612, Heidelberg roll feeder, machine number 160612, in good condition, available immediately. Dodovvifispfx Apbscn If you are interested, we would be happy to inform you about other machines in our facility. You are welcome to view the machine in our facility by appointment.

Year of construction: 1989, condition: good (used), machine/vehicle number: 11848, Punching platen Gietz MDST, machine number 11848, year of manufacture 1989, in good condition, available immediately Dcodpfx Asrbhd Topbsn We have two more Gietz models. Please ask for an offer. If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to view the machine at our premises by prior appointment.

Condition: used, Year of construction: 1959, The Heidelberg OHT, manufactured in 1959, is a machine with an A4 format. It is currently in production and located in Germany. The delivery terms are FCA. Format: A4 Equipment: Letter Press Tiegel - DIE Cutter Dcodpfxovfxwtj Apbjn Punching force 40 tons Size min.: 40 x 70 mm Standard chase: 260 x 340mm Speed min.: 2.200 sph - max. 5.500 sph

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 2093249C, total height: 1,050 mm, total width: 680 mm, input voltage: 400 V, power: 8 kW (10.88 HP), workpiece weight (max.): 175 kg, pressure: 2 bar, input frequency: 50 Hz, Professional, floor-standing Schultheiss VPC 055 / 400 Sp induction vacuum pressure casting machine. Manufactured in Germany, this heavy-duty unit is designed for large-volume, high-capacity jewelry production and industrial casting components where absolute speed and thermal stability are required. Equipped with a powerful 3-phase induction heating system and a digital West 6100+ temperature controller, it delivers rapid melting cycles and superb alloy homogeneity through an integrated mixing booster effect. Key Features: - Industrial Capacity: Equipped with a large crucible capacity, optimized for production-level batches. - 3-Phase Power System: 400V supply guarantees rapid melting times and consistent duty cycles. - Advanced Digital Monitoring: Integrated West 6100+ precision controller for exact thermal management. - Precision Vacuum & Pressure: Excellent fill rates for incredibly fine filigree details or heavy solid trees. Technical Specifications: - Manufacturer: Schultheiss GmbH (Germany) - Type: VPC 055 / 400 Sp - Year of Manufacture: 2009 - Serial Number: 2093249C - Voltage: 400V / 50Hz (3-Phase) - Power: 11 kVA / 16 A (approx. 8 kW active power) - Max. Temperature: 1,450°C - Casting Pressure: Up to 2.0 bar Dedpfxsy Tbigj Apbjcn - Condition: Great condition, fully functional, clean casting assembly, and clear interface controls. VPC 066

Condition: used, Year of construction: 1981, colour units 1 Djdpfxjy N D N Is Apbocn max. printing speed sheets 5500 /h max. paper size 26 x 38 cm serial no. 193.231

Year of construction: 2011, condition: used, The LECO TC-400 ON analyzer is a highly precise laboratory instrument for determining the oxygen and nitrogen content in solid samples. This system is typically used in metallurgy, materials testing, research, and quality assurance, providing reliable elemental analysis for a wide range of inorganic materials. The TC-400 operates as an inert gas fusion analyzer (ON/O-N analysis) and enables: Determination of oxygen (O) and nitrogen (N) in solid samples Dedezkaa Aepfx Apbscn Analysis of metals, alloys, ceramics, and powder materials Highly precise measurement through fusion extraction in a graphite crucible Automated sample loading (depending on the configuration) Evaluation via integrated analysis software Repeatable results for quality and process control Documentation and data management via TCWin Analysis Software (Version 4.24) Thanks to its robust LECO technology, the TC-400 offers stable performance, high measurement accuracy, and a proven analytical platform for demanding applications in research and industry.

Condition: used, Schließrahmen - Frame OHT Letter Press Heidelberg OHT A4-24 Frame OHT Tiegel -8 Frame KS Cylinder -1 Frame KSB Cylinder -2 Frame S Cylinder -4 Frame SBG Cylinder Dcjdsrffmzjpfx Apben -1 Frame Adast GP Tiegel Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, tank capacity: 200 l, input current: 70 A, input frequency: 50 Hz, power: 70 kW (95.17 HP), INDUCTOR IH-40-HNK 40 kW Induction Aluminium Melting / Holding Furnace For sale is an INDUCTOR IH-40-HNK industrial induction melting and holding furnace manufactured in 2015. The system features a modern medium-frequency induction power supply with water-cooled induction coil and insulated stainless-steel melting vessel. Dcedpozy N Ihjfx Apbon The induction coil is mounted underneath the crucible, providing efficient and uniform bottom heating. The furnace is suitable for melting and holding aluminium and aluminium alloys in foundry and industrial production environments. Technical Specifications Manufacturer: INDUCTOR Ltd. Model: IH-40-HNK Year of manufacture: 2015 Power: 40 kW Supply voltage: 3 × 400 V / 50 Hz Rated current: 70 A Water-cooled induction system Insulated stainless-steel melting vessel Approximate vessel capacity: 200 litres Medium-frequency IGBT inverter technology PLC / HMI control system Control cabinet weight: 190 kg Applications Aluminium melting Aluminium holding Foundry operations Metal processing Casting lines The machine is offered complete with the control cabinet and induction power supply.

Year of construction: 2026, operating hours: 2 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S22EVA_03, Exhibition machine - like new. EVA Turntable / base frame increased / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Dcodpfsz Iqnvox Apbjn Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Other systems are immediately available from stock.

Condition: used, Year of construction: 1975, functionality: fully functional, overall weight: 10,000 kg, total length: 2,745 mm, total width: 2,360 mm, total height: 2,700 mm, type of cooling: air, BBC BROWN BOVERI (nowadays ABB) – Pouromat, pouring furnace, type XCQ 44 Dodpfx Apjzfyu Asbjcn TECHNICAL DATA - crucible capacity: 4.4t - tilting furnace - inductor 120kW - inductor voltage 380/425V - 2 operating modes: preheating, heating mode 1 - pouring rate: 1-20kg/s - dimensions:  height: approx. 2700mm  length: 2745mm  width: 2360mm - weight: approx. 10,000kg - furnace equipped with a bottom-pour stopper - average inductor lifespan: 12 weeks - average bottom-pour stopper lifespan: 1 week - average crucible lifespan: 4 – 6 months - furnace equipped with an additional device used to modify the liquid metal with ferrosilicon CONSTRUCTION The pouring furnace consists of four basic groups: - First group – longitudinal travel (orbit motor) - Second group – transverse travel, including the bottom-pour stopper - Third group – inductor with a power of 120 kW, voltage 380 V 50Hz, whose main task is to heat the liquid metal. The inductor is constantly air-cooled during operation. - Fourth group – switchboard with a built-in transformer, contactors and control station. POURING PROCESS The pouring process proceeds as follows: DISAMATIC 2032 A displays the molds on the conveyor in the correct position. The correct position means that the open pouring basin in the mold is located in a position compatible with the bottom-pour stopper at the bottom of the crucible. If the desired position is achieved, the operator manually (by means of a lever) lifts the bottom-pour stopper in order to fill the mold, until the liquid metal is visible in the outflow. The speed of pouring the molds can be adjusted depending on the diameter of the ceramic block and the orientation of the bottom-pour stopper towards the ceramic block. CERAMICS The manufacturer, BBC, recommends using a two-layer firebrick lining, where one layer is permanent, but the second is expendable. The permanent lining consists of an insulating layer, which is a lightweight burned stone, and a sillimanite layer. The expendable layer consists of a corundum material, meaning a concrete with a high clay content (94%). Both parts are connected together by means of a special cement. The crucible inductor is located in a lining of Al₂O₃ or MgO and SiO₂, depending on the requirements. The material used to seal the bottom-pour stopper has the quality of chamotte with different clay content. The inductor is assembled to the pouring furnace by means of screws and a sealing compound with the proper plasticity and heat resistance. The entire device consists of three stopper rod sleeves, a bot, and a ceramic block, where the bot and stopper rod sleeves are connected together. The bottom-pour stopper is seated on a threaded bar. The bottom-pour stopper is continuously air-cooled. Recommended air pressure: 6 atm. CERAMICS LIFESPAN 1. crucible: approx. 4 – 6 months 2. inductor: approx. 12 weeks The lifespan of the ceramics depends on many factors. The most important are: production frequency, pouring temperature, cleanliness of the liquid metal, and alloy type. The lifespan of the upper cover and rotating cover is much longer because these parts have no direct contact with the liquid metal. PRICE *44,100 EUR *disassembly of the furnace, transportation costs, and assembly at the customer's location are paid by the Buyer; the price includes additional equipment: - additional (replaceable) inductors (without induction coil): 2 pcs.

Condition: used, Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHT Year 1983 - Serial-No. 194543 Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Dcedpfev Hw Hiox Apbjn Skeleton chase: 260 x 350mm Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Letter Press Tiegel in good condition - DIE Cutter Heidelberg OHT in einem guten Zustand. Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHT Year 1953 - Serial-No. 43717 Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mm Djdpfsztzp Rsx Apbecn Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 2020, Baling press, MACFAB, – used –: Price ex works: €13,500.00 (net)! Dcsdpozxciiefx Apbon Manufacturer: MACFAB Systems Ltd Type: BMF650 Auto HT RAL - MM9.8 Year of manufacture: 01/2020 Serial number: MF J144 Weight: 1770 kg Operating hours: approx. 16h Automatic operation & "Bale ready" indicator Horizontal door that pivots to the side Surface / Color: RAL6018 Feed opening: 1,500x880x769mm (WxHxD) Dimensions, press: 2,100x1,524x3,217mm (WxDxH) Former new price: €18,921.00 Condition: The machine was only used once for testing purposes. Available: immediately Location: 72336 Balingen

Condition: excellent (used), Mettler Toledo DSC 3 STARe System FRS5+ – Thermal Analysis System (DSC3/500) incl. accessories, PC, and balance Manufacturer: Mettler Toledo Model: DSC 3 STARe System Specification: DSC3/500 Description: For sale is a professional thermal analysis system, Mettler Toledo DSC 3 STARe System equipped with FRS5+ sensor. The device is used for the analysis of thermal material properties via Differential Scanning Calorimetry (DSC). The system comes from a professional laboratory environment and is in well-maintained used condition. The last maintenance by Mettler Toledo was carried out on 08/04/2025; the next maintenance is scheduled for 04/2027. Applications: - Research and development - Quality assurance - Material testing - Analysis of polymers and materials Dsdpfx Apey Drl Hsbjcn Functions: - Determination of melting points and glass transitions - Analysis of crystallization and phase transitions - Measurement of heat capacity (Cp) - Investigation of reaction kinetics (curing, decomposition) - Purity analysis - Determination of oxidation induction time (OIT) Technical data: - System: DSC 3 STARe System - Specification: DSC3/500 - Sensor: FRS5+ - Furnace power: 200 W - Cooling: air cooled - Lid: Automatic - Power supply: 230 V / 50–60 Hz - Fuse: 6 A - Power rating: max. 600 VA - Software: STARe Software V16.30 - Operating system: Windows 10 - Dimensions (approx.): 60 x 55 x 55 cm - Weight (approx.): 55–65 kg Workstation / PC: - Dell Optiplex control PC with monitor - Windows 10 installed - STARe Software V16.30 Additional equipment: - Thermal analysis package DSC3/500 - DSC 500 accessory kit - Crucible sealing apparatus - Mettler Toledo precision balance (analytical balance) - Weighing range: 42 g / 120 g - Readability: 0.01 mg / 0.1 mg Scope of delivery: - Mettler Toledo DSC 3 main unit - Touchscreen control unit - FRS5+ sensor - Control PC (Dell Optiplex) with monitor - DSC 500 accessory kit - Crucible sealer - Precision balance - Accessories as shown in the pictures - Documentation and training materials - USB sticks / data media Condition: Used, from a laboratory environment, well-maintained. Notice: The scope of delivery is determined by the pictures. The table shown in the photos is not included in the offer. Miscellaneous: Commercial sale. Invoice with VAT available. Inspection possible by appointment. Subject to prior sale and errors.

Condition: used, Year of construction: 1964, machine/vehicle number: 149218, Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHTYear 1964 - Serial-No. 149218 N Dcjdpoh Eg Tfofx Apben Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mmKomplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1966, machine/vehicle number: 155017, Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHTYear 1966 - Serial-No. 155017 N Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mmKomplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Dcedpfx Apeh Axiqjben On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 1967, condition: good (used), machine/vehicle number: T161047N, A4 Size Standard Machine Dcodpfx Aekhgzfspbon