Used Customer for sale (9,693)

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 12,850 h, controller model: Siemens Sinumerik 840 D, laser power: 2,400 W, stroke rate (max.): 600 1/min, travel distance X-axis: 3,085 mm, travel distance Y-axis: 1,650 mm, TECHNICAL DETAILS Laser type: TLF 2400 turbo Laser power: 2,700 W Working area X-axis without repositioning: 3,085 mm Working area Y-axis max.: 1,650 mm Travel speed X-axis max.: 90 m/min Travel speed Y-axis max.: 60 m/min Pjdpfxez Duvvj Aazjgt Simultaneous travel speed: 108 m/min Stroke frequency max.: 600 1/min Punching diameter max.: 76.2 mm Sheet thickness max.: 8 mm Punching force: 220 kN Workpiece weight max.: 230 kg Number of tools in the magazine: 18 pcs. MACHINE DETAILS Control system (software version): Siemens Sinumerik 840 D Pneumatic connection: 25 Nm³/h Electrical connection: 65 kVA Operating hours since power-on: 12,850 h (as of 07/01/2026) Dimensions & Weight Footprint (L × W × H): 7,900 × 8,700 × 2,400 mm Machine weight: 25,000 kg EQUIPMENT Capacitive distance control ContourLas Compact dust extractor Slag detection 18 tool cassettes 18 die holders 3 clamping jaws Automatic tool changer with 18 stations Rotation of all tools NC-controlled digital, maintenance-free AC drives Automatic repositioning Rapid shutdown of the hydraulics Automatic shutdown Tool length compensation 2 small parts slides 500 × 500 mm with sensors Quality list Punch scrap extraction Forming capability Programmable punch lubrication Programmable clamping system Adaptive stroke length control Safety devices Remote diagnostics RJ45 network connection Detailed operating manual Extensive tool set including 18 setup cassettes Storage cabinet, green TRUMPF Quickset TRUMPF Easylod Table extensions (custom-built) for processing sheets up to 4 m in length Existing spare parts, uninspected and without storage Chip conveyor with container Air-cushioned installation Multitool Thread forming

Year of construction: 2025, operating hours: 40 h, condition: ready for operation (used), functionality: fully functional, Commercial LST 60L Chocolate Melanger – 2026 – Light Commercial Use We are selling our LST 60L commercial chocolate melanger following the closure of our recently launched premium protein bar production facility in London. The machine was purchased new in 2026 specifically for our own food production and has had relatively light commercial use. It is in good working condition and is ready for production. The machine has a custom-made spiral stone grinding system, designed to provide a finer and more consistent grind and improved refining of chocolate and cocoa products. It is suitable for a range of applications, including: Chocolate production Cocoa nib grinding and refining Nut butters Pjdjz Dw Aropfx Aazjgt Praline Nut-based fillings Chocolate and nut spreads Other confectionery and food applications Videos of the machine in operation are available and can be provided to serious buyers. We are closing the complete production facility, so other food-production machinery is also available, including: Protein bar extruder Automatic flow-wrapping machines Planetary mixers Blixers Chocolate processing equipment Other production and packaging equipment The equipment was purchased for our own production and is being sold due to the closure of the facility, rather than because of any issue with the machinery.

Condition: used, functionality: fully functional, cutting width (max.): 130 mm, The STENNER 105 - 42" RE SAW is a high-quality woodworking machine designed for professional use in sawmills. With a brand name known for reliability and durability, this machine is ideal for cutting and reshaping wood with precision and efficiency. Perfect for woodworking enthusiasts or businesses in the forestry industry, the STENNER 105 offers a range of cutting capabilities to meet various production needs. Whether you are looking to create custom wooden products or streamline your woodworking process, this re saw is a versatile and essential tool. Model type: VHT Machine size: 105 Leverage ratio: 40:1 Saw width for 85 mm: 6 pieces Saw width for 100 mm: 7 pieces Saw width for 115 mm: 8 pieces Psdpfez E Hknjx Aazegt Saw width for 130 mm: 9 pieces Maximum saw thickness: 1.2 mm If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Reportedly unused Sinclair Stainless Fabrications approximately 20,000 litre nominal capacity vertical 316L stainless steel fermenter/bioreactor, approximately 15,000 litre working capacity with (4) zone limpet coil jacket. Unit has a welded dished top and bottom. Internal rated -1/+3barG internal operating at 0-159degC. Internal coils rated -1/+5barG and limpet coils rated -1/+5barG operating at 0-159degC. Mixer Drive = Nominal Speed: 100 RPM; Motor: 55KW 1500RPM 250 IE3 IP55 3PH 230/400V 50HZ; Gearbox Input Coupling: Integral w/Gearbox; External Paint Finish: Standard Paint; Colour: Blue RAL5005 Mounting = Arrangement: Structural Nozzle w/Flange Shaft Seal = Mechanical Seal: Custom Seal - No Bearing Balanced (AES CDM C/SiC/C/SiC-AFLAS(3) - Double Mechanical Seal. ) Pjdpfxsyln E Rs Aazsgt Mounting Flange = Flange Size: DN400 [16”]; Flange Class: CL-150; Flange Material: 316 Stainless Steel Face & Core Shaft = Shaft Diameter: 4-1/2”; Shaft Extension: 6754 mm; Shaft Material: 316 Stainless Steel Impellers = Impeller #1: 921 mm BT-6; Impeller #2: 959 mm W-4; Impeller #3: 959 mm W-4; Impeller #4: 959 mm W-4; Impeller Material: 316 Stainless Steel Mixer Options = Gearbox with Food Grade Lubricants Design Compliance = Machinery Directive 2006/42/EU Specifications: Capacity: 15,000 L Type of stainless: 316L Internal Pressure: -13 bar Internal Temperature: 0°C Jacket Pressure: -15 bar Jacket Temperature: 0°C Diameter: 1,800 mm Straight Side: 5,900 mm Legs/Lugs: Mounted on (4) legs Weight: 6720kg Dimensions: 2400mm diameter x 7500mm height

Condition: good (used), mileage: 275,000 km, power: 100 kW (135.96 HP), first registration: 12/2016, fuel type: diesel, overall weight: 3,500 kg, gearing type: automatic, emission class: euro5, Year of construction: 2016, Opel Movano 2.3dci 136 hp Year of manufacture: 12/2016 Mileage: 275,000 km Engine: 2.3dci 136 hp, Euro 5 Starts and drives well, shows signs of wear and tear. Pedpfxjz D Ebcs Aazegt Price: €5,000 + VAT = €6,050 all-inclusive Intended for a dealer or for export. For more information, call 0473/19.99.85.

Condition: used, first registration: 06/2006, overall weight: 3,500 kg, Equipment: crane, Crane: ----- Palfinger PK16502-5 - Radio remote control - 5x hydraulic extensions - Quick-change system Pgjdpfsz E Uf Tjx Aazot

Condition: used, mileage: 465,963 km, power: 120 kW (163.15 HP), first registration: 02/2013, fuel type: diesel, overall weight: 5,000 kg, color: green, gearing type: mechanical, emission class: euro5, number of seats: 2, loading space volume: 14 m³, loading space length: 4,300 mm, loading space width: 1,770 mm, loading space height: 1,910 mm, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Vehicle No. for customer inquiries: 226 ----Sales vehicle with: * Electrically operated sales flap * Glass lifting mechanism in the display case * Refrigerator * WAECO 230V/12V * Power outlet in the cab * Sink with hot water boiler * Shelves * Sales counter ----Special equipment: * Audio system Audio 20 (radio with CD player) * Outside temperature display * Battery 100 Ah * Deletion of cargo area / sliding door * Window for rear doors * Window for rear doors in black glass * Steering wheel with multifunction buttons incl. trip computer * Parameterizable special module * Spare wheel in road condition * Spare wheel holder under the end of the frame incl. jack * Rear view camera * Rear mud flaps * Front mud flaps * Seats in the cab: heated driver's seat * Seats in the cab: comfort sprung seat, driver's side * Rear stabilizer reinforced * Front stabilizer reinforced * Rear door step * Pre-installation for tachograph * Auxiliary heater (air) electric ----Standard equipment: * 3rd brake light * Adaptive brake light * Driver's airbag * Anti-lock braking system (ABS) * Drive type: rear-wheel drive * Washer fluid level indicator * Exterior mirrors, electrically adjustable and heated, both sides * Exterior mirrors with integrated turn signal * Braking system with ABS+ASR * Roof lining in the cab * Electronic stability program (ESP) * Electric windows, 2-way * 6-speed transmission - TSG (Eco Gear) * Lockable glove compartment * Rear door (opening angle 180 degrees) * Body/superstructure: high-roof van, standard * Childproof lock * Fuel tank: main tank 75 liters * Solid bulkhead for cargo area * Load securing / lashing points * Headlight range adjustment * Engine 2.1 liters - 120 kW CDI CAT * Particulate filter * Wheelbase 4325 mm * Smoker's package * Low emission according to emission standard Euro 5 * Power steering * Safety belt system with warning system (driver's side) * Seat cover / upholstery: fabric Lima * Seats in the cab: passenger seat with armrest Pjdpfx Aasylfa Sozogt * Seats in the cab: adjustable passenger seat * Seats in the cab: driver's seat with armrest * Service interval display Assyst * Immobilizer * Heat-reflecting glass * Central locking with remote control * Permissible total weight 5.00 t * Twin tires on 2nd axle / rear axle ----Technical data: * Wheelbase: 4,325 mm * Cargo area dimensions: L: 4,300 mm W: 1,770 mm H: 1,910 mm * Payload: 1,240 kg * Tire size: 205/75R16C ----German vehicle! * 15,900. - Euro §25a UStG (gross = net) * Inspection (TÜV) valid until 07.2026 * In case of export to third countries or the EU, a deposit will be retained. This will be refunded to the buyer after successful customs clearance or delivery. * Worldwide delivery possible - please ask us for your individual offer! * We will gladly accept your used vehicle as a trade-in! * Financing/leasing also possible in difficult cases * This description serves only for the general identification of the vehicle and does not constitute a guarantee in the legal sense. * The information does not claim to be complete. The information/descriptions/pictures given are non-binding and do not constitute warranted properties. * We assume no liability for errors and obvious mistakes. * The buyer is obliged to independently verify the condition and equipment of the vehicles before purchase. * Subject to price changes, typing errors, mistakes and prior sale.

Condition: used, mileage: 5,800 km, first registration: 10/1983, overall weight: 6,000 kg, color: green, gearing type: mechanical, number of seats: 1, Year of construction: 1983, Equipment: all wheel drive, trailer coupling, MB Trac 700 K Road and Rail Pgjdpfx Aei R Ag Teazet Dual-purpose vehicle Rail guidance Coupling rod UVV 07.2012 approx. 1500 operating hours currently in daily use.

Condition: used, mileage: 14,000 km, power: 81 kW (110.13 HP), first registration: 12/1978, fuel type: diesel, overall weight: 6,500 kg, color: green, gearing type: mechanical, Year of construction: 1978, Equipment: all wheel drive, trailer coupling, U 900 Cabrio, fully restored, like new Tires: 405-70 / 20 Rear power lift Transmission: 6-speed dual-clutch Pedji R Ainspfx Aazsgt Crawl gears Tilting cylinder Optional hardtop Power take-off (PTO) Transfer gearbox Archive images, vehicle under construction First owner: Aviation Group

Condition: used, mileage: 360,000 km, power: 110 kW (149.56 HP), first registration: 12/2000, fuel type: diesel, overall weight: 7,490 kg, color: black, gearing type: mechanical, emission class: euro2, number of seats: 2, total length: 8,300 mm, total width: 2,550 mm, total height: 3,600 mm, Equipment: ABS, air conditioning, parking heater, * Mercedes-Benz Atego 815 with a very well-insulated box/sales body and 2 seats * Bunk beds - air conditioning - awning - 2 roof hatches - shelves - bench seat, etc. * Diesel - displacement: 4,249 cc³ - 110 kW / 150 hp - Euro 3 - yellow emissions sticker - Podpfx Ajzlmk Roazogt * Insulation and electrical wiring are completely finished - former sales body * Please schedule an appointment for a viewing - private sale on behalf of a customer - * Contact: Mr. Andreas Vogel * The information provided online is a non-binding description. * It does not constitute a guarantee of specific properties. * The seller is not liable for typographical or data transmission errors. * Subject to changes, errors and prior sale.

Year of construction: 2019, condition: like new (used), Automated system to laminate reel of chromotography paper between 2 reels of polyester handle material and on to profile the chromotography paper tip and then cut the web of laminated polyester with chromotography paper into single profiled strips. The Matrix 7100 Laminator was developed to meet the demanding requirements of the lateral flow test strip industry for a moderately priced system capable of supplying the membrane lamination needs of the moderate to high volume production facility. The unit was designed to allow process flexibility while at the same time optimizing product yields and throughput. Numerous options are available allowing the system to support a wide variety of material types, lamination configurations and process variables. The Matrix 7100 allows for continuous lamination of membranes onto a plastic backing web and the cutting of the resultant laminate into discrete cards for further processing on other, downstream equipment. Numerous options provide the utmost in process flexibility at a very low overall cost. The integral touch screen operator interface terminal provides for multiple recipe storage and simple and reliable setup and operation while simplifying process validation. Pedpfxoya H S So Aazogt Key Features Touch screen operator interface terminal for simple setup and operation Simple web guide adjustment Rapid changeover to support multiple products Flexible to support changing requirements Base configuration supports Backing Web with Release Liner plus 4 membranes Extruded aluminium structural frame Flying shear for continuous card cutting Reel to reel lamination option

Condition: used, mileage: 1 km, first registration: 01/1998, overall weight: 6,647 kg, color: orange, Year of construction: 1998, Stock no. 5824 Approx. 3 m³ ATC 50 Asphalt Thermal Container ---Manufacturer: ATC Type: ATC 50 Year of manufacture: 1998 Gross weight: 6,647 kg Unladen weight (manufacturer specification): 1,647 kg Payload: 5,000 kg Color: Orange Volume: approx. 3 m³ Hydraulic Hardox feed auger Hydraulically operated roof Swivelling V2A discharge chute Control box at rear left Foldable access ladder at rear right Propane gas heating with thermostat 2 holders for 33 kg gas cylinders each Gas consumption per hour: approx. 2.0 kg Support stands Required loading area for truck: 3.06 m long x 2.14 m wide Container dimensions: approx. 3.60 m long x 2.00 m wide x 1.54 m high Podpfx Aajy Sra Hszegt Notice regarding potential errors in the listing: Despite taking great care in preparing this listing, there may be occasional errors in the description or information provided. We accept no liability for inaccuracies, changes or prior sale. All information is without guarantee. Please contact us to verify details or for further questions.

Condition: used, mileage: 8,000 km, first registration: 10/1987, fuel type: diesel, overall weight: 6,500 kg, color: orange, gearing type: semi-automatic, number of seats: 1, Year of construction: 1987, Equipment: all wheel drive, trailer coupling, MB trac 700 K, dual-purpose (road and rail) Excellent condition Company-owned vehicle Torque converter Wagon braking system, 300 tons UVV inspection valid until 07/2012 Approximately 1780 operating hours. Podpei R Ahbofx Aazegt

Condition: used, mileage: 139,000 km, power: 118 kW (160.44 HP), first registration: 04/1995, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 11/2026, color: white, gearing type: mechanical, emission class: euro1, number of seats: 3, total length: 9,200 mm, total width: 2,550 mm, total height: 4,000 mm, loading space volume: 17 m³, loading space length: 6,950 mm, loading space width: 2,400 mm, loading space height: 2,360 mm, Equipment: parking heater, Complete hair salon on a 7.49-ton truck. Fully equipped and used extensively until recently. This is the original "mobile hair salon," which was invented and built in Southern Germany in the 1990s. This truck is ideally suited as a mobile hair salon during major renovation or remodeling work on your own hair salon. Another business model would be to rent it out. The buyer of the truck will also be assigned the patent, granting them the exclusive right to commercially use this specific vehicle in its current form. However, the patent cannot be transferred to other vehicles or objects. The MAN has a large box body, originally designed as a refrigerated vehicle. Therefore, it is excellently thermally insulated. The air conditioning is provided by the cooling unit mounted on the front wall. In addition, there is an electric heater. 4 customer/hairdresser stations with height-adjustable swivel chairs, arranged slightly diagonally. Plus 1 separate washbasin at the rear. In reality, there is plenty of space to work, so several stylists can cut the hair of several customers at the same time without constantly getting in each other's way. The salon is completed by a reception desk, wardrobe, magazine rack, and several small cabinets/drawers and display shelves. The main work area is 5.95 m long. In front of it is a 1.00 m long separate area with a washbasin for the staff. The hot water boiler is also located there. The separate area also provides storage space for ramps, etc. Two drying hoods are also available there, and these are included in the offer. The overall dimensions of the box body, measured internally: 6.95 m long (5.95 m main area plus 1.00 m separate area). 2.40 m wide. 2.36 m high. The standing height in the center of the room is reduced to 2.29 m; in the area of the lighting, there is an even slightly lower height due to the design. Overall, the box body has a surprisingly spacious feel – for both customers and employees. This mobile hair salon has approximately 17 square meters of total space. The salon can be accessed via an aluminum staircase, which is permanently mounted on the right at the rear and can be folded down easily. (The handrails, which are also present on both sides, are not mounted in the photos, as they can be used during travel to secure two hairdresser chairs – see the photos). Large storage compartments under the box body contain connection pieces for electricity, water supply, and wastewater. The vehicle must be connected to external supply lines for operation. A 230-volt system is installed inside. The external power connection is made via a 32A plug. The truck chassis is a solid MAN 8.163 LLC from the then very modern and comfortable L2000 series. Psdpszt Ec Iofx Aazsgt Euro 1 four-cylinder diesel engine and manual transmission. Wheelbase: 4900 mm. Hydraulically tilting cab with 3 seats. An analog tachograph (for 2 drivers) is installed. The maximum speed is 104 km/h, but the permitted speed in Germany is 80 km/h. Unladen weight 7340 kg according to the documents, permissible total weight 7490 kg. Anyone who obtained a passenger car driver's license of class III in Germany before 1999, held it continuously, and possibly exchanged it correctly for a new EU driver's license may immediately and legally operate this mobile hair salon on public roads. According to the vehicle documents, the registration type is "Other Motor Vehicle - Hairdressing Vehicle." When performing the trade, toll-free drivin

Condition: used, mileage: 177,500 km, power: 155 kW (210.74 HP), first registration: 05/2020, fuel type: diesel, overall weight: 7,200 kg, axle configuration: 2 axles, next inspection (TÜV): 08/2026, color: white, gearing type: automatic, emission class: euro6, loading space length: 4,650 mm, loading space width: 2,360 mm, loading space height: 2,100 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, Internal vehicle number: 95255A Exterior * 4x2 drive type: rear-wheel drive * 02714 Exterior mirrors electrically adjustable and heated * Long exterior mirrors, suitable for vehicle width of 2350 mm * Tinted windscreen and side windows * 79250 Urea tank (AdBlue): 20 liters * 08640 Fuel tank: 90 liters * Refrigerant compressor 170 cc * 00663 Front mud flaps * 02536 Daytime running lights Interior * 06650 Automatic climate control * 00614 Single passenger seat * 79300 Storage compartment on dashboard with USB port * 72484 Digital tachograph * 77742 A-pillar grab handle * 72619 Steering column (steering wheel) height/length adjustable * 76134 Maintenance indicator Multimedia * 79245 Audio system: digital audio system (DAB) with USB and Bluetooth hands-free system Comfort and Environment * 76128 Automatic transmission - Hi-Matic (8-speed) * Electronic brakeforce distribution * 06356 Speed limiter 90 km/h * 05925 Programmable speed limiter * Audio/telephone controls on steering wheel * 02463 Cruise control * 06536 Central locking with remote control * 06925 Particulate filter * 210EVID Low-emission according to Euro 6d standard * 76747 Comfort dashboard Safety * Brake assist * Immobilizer Pedpfxozi Ifdj Aazogt * Traction control (ASR) * Driver-side airbag * 04488 Electronic Stability Program (ESP) * Anti-lock Braking System (ABS) Other * 77863 Front axle load 2.7 t * 02240 Rear suspension: trapezoidal leaf springs * Front suspension: torsion bar * Twin tires on 2nd/rear axle * 08656 Bodybuilder interface * Model: C-Series * Driver assistance system: Hill Start Assist (AAS) * 72806 Driver assistance system: Advanced Emergency Braking System (AEBS) + City Brake * 72805 Driver assistance system: Lane Departure Warning System proactive (LDWS) * 210 A alternator * 210EVID Engine 3.0 liter – 154 kW diesel * 06628 Cab seating: luxury driver's seat * The vehicle bears customer advertising, which can be neutralized upon request. Miscellaneous: This offer is non-binding. Subject to change and prior sale. If a foreign currency is indicated, it is based on the current daily exchange rate. The valid currency is that of the vehicle location. ----.

Condition: used, mileage: 153,000 km, power: 110 kW (149.56 HP), first registration: 03/2008, overall weight: 5,000 kg, gearing type: mechanical, number of seats: 3, Year of construction: 2008, Equipment: parking heater, MAKE: MERCEDES BENZ MODEL: 515CDI SEWER INSPECTION YEAR OF MANUFACTURE: 2008 CE-CERTIFIED: YES OPERATING HOURS: 153,682 KM TYRES/UNDERCARRIAGE: 40% POWER: 150 HP ENGINE: MERCEDES 2148CC WEIGHT: 5,000KG Pgsdpsymvz Aofx Aazot OPTIONS: - SEWER INSPECTION VEHICLE - CABIN BATTERY - REMOTE CONTROL FOR SEWER ROBOT - ROBOT AND COMPUTER NOT INCLUDED - MONITOR FOR CAMERA - AIR CONDITIONING IN WORKSPACE PRICE IS EXCL. VAT KORENBLIK MACHINERY BV. VEENWEG 56 7336AG APELDOORN NETHERLANDS VAT ID: NL864089764B01

Condition: used, mileage: 179,000 km, power: 107 kW (145.48 HP), first registration: 01/2016, fuel type: diesel, overall weight: 5,200 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 2, loading space length: 5,200 mm, loading space width: 2,130 mm, loading space height: 2,050 mm, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Special equipment: Trailer socket preparation, Audio system: radio with CD player, MP3 compatible, USB and Bluetooth hands-free system, Body manufacturer interface, Exterior mirrors electrically adjustable and heated, Long exterior mirrors, for vehicle width 2350 mm, Generator 180 A, Fire extinguisher bracket, Fuel tank: 90 liters, Acoustic reversing warning (external warning system), Seats in the cab: passenger single seat, Seats in the cab: driver's comfort seat (hydraulic), Additional equipment: Driver's side airbag, Anti-slip regulation (ASR), Design: C-series, Brake assist, Electronic brake force distribution, Digital tachograph, Rear axle suspension: trapezoidal, Windshield and side windows tinted, Body/superstructure: sales body, Headlight range adjustment, Engine 3.0 L - 107 kW Diesel, Radio preparation with speakers, Wheelbase 4350 mm, Spare wheel in driving condition, Spare wheel holder between floor longitudinal member, Low emissions according to Euro 5 emission standard, Permissible total weight 5.20 t, payload 925 KG Pedpez D Hcusfx Aazsgt 1 SIPHON UNDER RESERVE AND 2 UNDER THE display case // LIFTING STRAP LONG 4640 MM ? WIDTH 1090 MM SUPPORTED BY GAS SPRING AND ELECTRO-CYLINDER + LONG FOLDING STRAP .4640 MM - WIDTH 300 MM // COUNTER LENGTH 1700 OF THE DISPLAY CASES // COOLING GLASS COLUMN LENGTH 1000 X WIDTH 900 MM POWERED BY THE GROUP AND FAN // 1/2 HP COMPRESSOR HOUSED IN THE CELL // EUTECTIC PLATES 1 GREEN BLOCK IN THE COOLING COLUMN // EUTECTIC PLATE 1 GREEN BLOCK IN THE HIGH RESERVE 2 IN L IN THE COOLING DISPLAY CASE 1 BLOCK IN THE LOWER RESERVE // AUTOMATIC DEFROSTING + TIMER // TEMPERATURE DISPLAY Quantity: 3 FOR DISPLAY, LOW AND HIGH RESERVE // 220-V CONNECTION FOR THE SCALE // 24-V SOCKET FOR THE SLICER //12V/24V CONVERTER //BATTERIES LITHIUM BATTERY PACK WITH CHARGER //12V/220V PURE SINE CONVERTER The vehicle is in good condition!! MOT and emissions test renewed for an extra charge Financing possible via Santander Bank

Condition: used, mileage: 22,450 km, power: 100 kW (135.96 HP), first registration: 05/1994, fuel type: diesel, overall weight: 7,490 kg, color: red, gearing type: mechanical, number of seats: 9, Mercedes 814 D LF 8/6 Pgsdezig Nnopfx Aazot 5-speed manual transmission, differential lock, 9 seats, double cab with doors Water pump + water tank

Condition: used, mileage: 99,000 km, power: 38 kW (51.67 HP), first registration: 02/1999, fuel type: diesel, overall weight: 4,000 kg, color: orange, number of seats: 2, Bucher Citycat 2000 street sweeper with front sweeping unit For inquiries: Condition: very good * Manufacturer: Bucher * Model: CityCat 2000 * Enclosed cabin with good all-round visibility * Side brush, left * Side brush, right * Front brush * Suction container ----Price: 6,900 Euros + 19% VAT For further questions, you can reach us at the following telephone numbers: We speak: German, English, French, and...? Typographical errors, errors and prior sale excepted. Pjdpszq Ipxjfx Aazogt

Condition: used, mileage: 295,668 km, power: 160 kW (217.54 HP), first registration: 12/2011, fuel type: diesel, empty load weight: 2,750 kg, maximum load weight: 750 kg, tire size: 235 / 65 R16C / 8mm, next inspection (TÜV): 07/2024, driver cabin: day cab, gearing type: mechanical, emission class: euro5, number of seats: 2, total width: 25,500 mm, front tire size: 235 / 65 R16C / 8mm, operation weight: 3,500 kg, Equipment: air conditioning,

Condition: used, mileage: 127,000 km, power: 114 kW (155.00 HP), first registration: 01/1998, fuel type: diesel, overall weight: 7,500 kg, next inspection (TÜV): 08/2027, color: silver, gearing type: mechanical, emission class: euro2, number of seats: 2, total length: 9,100 mm, total width: 2,550 mm, total height: 3,580 mm, loading space volume: 17 m³, loading space length: 6,900 mm, loading space width: 2,400 mm, loading space height: 2,360 mm, Equipment: parking heater, Complete hair salon on a 7.5-ton truck. Fully equipped and used extensively until recently. This is the 2nd unit of the original "1st mobile hair salon," also available from us, which was invented and built in southern Germany in the 1990s. This truck is ideally suited as a mobile hair salon during major renovation or refurbishment work on your own hair salon. Another business model would be renting it out. The buyer of the truck will also be assigned the patent, granting them the exclusive right to use this specific vehicle for commercial purposes. However, the patent cannot be transferred to other vehicles/objects. The MAN has a large box body, originally a refrigerated vehicle. Therefore, it is thermally well-insulated. Air conditioning is provided by a mobile air conditioning unit with remote control. In addition, there is an electric heater. 4 customer/hairdresser stations with height-adjustable swivel chairs, arranged at a slight angle. Plus 1 separate washbasin at the rear. In fact, there is plenty of space everywhere to work, so several professionals can cut multiple customers' hair simultaneously without constantly getting in each other's way. The salon is completed by a reception desk, coat rack, magazine rack, as well as several small cabinets/drawers and sales shelves. The main work area is approximately 5.90 m long. In front of it is a separate area of approximately 1.00 m with a washbasin for the employees. This area also houses the hot water boiler and the fuse box, as well as shelves and storage space. There are also 2 hair dryers, which are, of course, included in the offer. The overall dimensions of the box body, interior approximately: 6.90 m long (5.90 m main area plus 1.00 m separate area), 2.40 m wide, 2.36 m high. Overall, the box body has a remarkably spacious feel - for both customers and employees. This mobile hair salon has approximately 17 square meters of total space. The salon can be accessed via an aluminum staircase, which is permanently mounted on the rear right and can be folded down slightly. The matching handrails, which are on both sides, are currently lying on the floor inside the box body for transport, see photos. Large storage boxes under the box body contain connection pieces for electricity, water supply, and wastewater drainage. The vehicle must be connected to external supply lines for operation. A 230-volt system is installed inside. The external power connection is made via a 32A plug. The truck chassis is a solid MAN 8.163 LLC from the then very modern and comfortable L2000 series. Four-cylinder diesel engine with 4580 ccm, Euro 2 and manual transmission. Wheelbase: 4900 mm. An analog tachograph is installed. The top speed is 98 km/h, but the permitted speed in Germany is 80 km/h. Unladen weight 7000 kg according to the documents, permissible total weight 7500 kg. According to the vehicle documents, the current registration type is "Other Motor Vehicle - Hair Salon Truck". When operating the business, this truck may be exempt from tolls. The MAN has leaf springs at the front and air suspension at the rear with a raising and lowering function at the driver's seat. The tires, size 215/75R17.5, all have a nearly new tread depth. A spare tire is mounted on the frame. The entire truck has only covered 127,000 kilometers. Pgodpfxozwrtuj Aazst The vehicle was deregistered in August 2026. The TÜV (German technical inspection) was renewed in August 2026 and is valid until 08/2027. C

Condition: used, mileage: 41,600 km, power: 177 kW (240.65 HP), first registration: 08/1998, fuel type: diesel, empty load weight: 8,765 kg, maximum load weight: 5,235 kg, overall weight: 14,000 kg, fuel: diesel, color: blue, driver cabin: other, gearing type: other, emission class: none, suspension: other, total length: 8,000 mm, Year of construction: 1998, construction height: 3,250 mm, The Iveco FF 135 E 4x4 utility vehicle is an exceptional special-purpose vehicle for anyone seeking to combine robust technology, off-road capability, and versatile applications. With its permanently activated 4x4 drive and proven Iveco chassis, this vehicle provides an excellent foundation for demanding tasks off paved roads and anywhere reliable mobility is required. A particularly noteworthy feature is the extremely low mileage of just 41,600 km. For a vehicle first registered in August 1998, this mileage is remarkable and makes the Iveco FF 135 E a particularly interesting opportunity. The 5,861 cm³ engine provides a solid basis for professional use and handling a wide range of transport and equipment tasks. As a utility vehicle, this vehicle offers versatile applications. Whether for fire departments, municipalities, emergency response organizations, construction companies, forestry operations, or other specialized users who rely on a robust all-wheel-drive vehicle, the Iveco can leverage its special strengths where conventional commercial vehicles quickly reach their limits. Anyone looking for a distinctive special-purpose vehicle with genuine 4x4 capability and exceptionally low mileage should take a closer look at this Iveco FF 135 E. It is a rare and versatile commercial vehicle with great potential for demanding applications and a combination that is difficult to find on the used vehicle market. Pgjdpfx Aaoziqltszst For sale only to commercial businesses (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale.

Condition: used, Year of construction: 2006, functionality: unexamined, machine/vehicle number: 360-6988C, total length: 5,800 mm, total width: 1,140 mm, total height: 1,270 mm, input voltage: 380 V, type of input current: three-phase, infeed width: 890 mm, product height (max.): 830 mm, input frequency: 50 Hz, We are offering this used HIX dryer CUSTOM NP-3619 CE exposure unit, year of manufacture 2006. Power: 27.2 kW Current at 415 V: 40 A Current at 380 V: 37 A Voltage range: 380–415 V Frequency: 50/60 Hz Pedpfox Upvwox Aazegt Number of conductors: 5 Phase/neutral voltage: 220–240 V Serial number: 360-6988C If you have any questions or need more information, please feel free to send us a message or call us.

Condition: used, mileage: 52,761 km, power: 118 kW (160.44 HP), first registration: 09/1997, fuel type: diesel, empty load weight: 4,880 kg, maximum load weight: 2,610 kg, overall weight: 7,490 kg, next inspection (TÜV): 02/2028, fuel: diesel, color: red, driver cabin: other, gearing type: other, emission class: none, suspension: other, total length: 6,300 mm, Year of construction: 1997, construction height: 2,850 mm, The MAN L2000 DoKa LF8/6 is a versatile and robust utility vehicle that impresses with its unique combination of proven MAN technology, manageable mileage, and a practical double cab. Anyone looking for a reliable vehicle for commercial, municipal, or specialized applications will find an interesting and distinctive solution here. Powered by a 4,580 cm³ engine, the MAN L2000 offers a solid foundation for a wide range of tasks. The low mileage of only 52,761 km is particularly noteworthy. For a vehicle with initial registration in September 1997, this mileage is exceptionally attractive and makes the L2000 a remarkable opportunity for buyers who value a vehicle with comparatively low mileage. Psdpey Ihrkefx Aazsgt The DoKa version further expands the range of applications and provides a practical solution when materials or equipment, as well as several people, need to be transported. This makes the vehicle ideally suited for fire departments, municipalities, construction companies, service providers, or other areas of operation where flexibility and functionality are required. The MAN L2000 DoKa LF8/6 combines the charm of a proven commercial vehicle with a surprisingly low mileage for its age. Anyone looking for a robust and versatile vehicle with a distinctive character should take a closer look at this model. It is an interesting opportunity for all those who want to combine proven MAN quality and practical applications into an exceptional overall package. Sale only to commercial businesses (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale.

Condition: used, functionality: fully functional, Year of construction: 2021, !! Short delivery time, we are happy to advise you !! A simple flow pack machine suitable for packaging various products. Pgsdpfx Aaou T N Umezot You have the option to inspect it locally before making a purchase decision. 3 units available Used. Thermal transfer printer available as an option: €1,900