Used Cut Off Machine for sale (72,188)

Condition: ready for operation (used), Year of construction: 2021, operating hours: 590 h, functionality: fully functional, table length: 6,000 mm, table width: 2,000 mm, Machine with only 590 cutting hours! Submitting a bid obligates you to collect the machine by June 30, 2026! TECHNICAL DETAILS Table length: 6,000 mm Table width: 2,000 mm Piercing: up to 16 mm Maximum permissible sheet metal thickness: 100 mm MACHINE DETAILS Operating hours Machine running hours: 5,400 h Cutting hours: 590 h Hjdozc Euqspfx Apyonn EQUIPMENT Power source: Hypertherm Powermax 65 Pin marker TEKA filter system Thanks to a compatible cutting head, 125 amps are possible with the installation of a new power source.

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, machine/vehicle number: 22076049, wire diameter (max.): 9 mm, power: 18 kW (24.47 HP), spring diameter: 120 mm, wire diameter (min.): 2 mm, production capacity: 5,400 unit/h, The machine was equipped with a new control system in the year 2000! A programmable, electronically-hydraulically controlled universal spring coiling machine for the production of right-hand and left-hand coiled compression and tension springs, as well as leg springs. The springs can be produced with any desired pitch and spring body shape. TECHNICAL DETAILS Wire diameter max.: 9 mm Wire diameter min.: 2 mm Production capacity max.: 90 pieces/min Outer spring diameter: 10 - 120 mm Wire feed speed: 27 - 80 m/min Wire feed length: unlimited Two-finger system Wire thickness: 2 - 9 mm Outer spring diameter: 10 - 120 mm Single-finger system Hsdpfx Aozb Dapepyonn Wire thickness: 3 - 7 mm Outer spring diameter max.: 60 mm MACHINE DETAILS Operating voltage: 380 V / 50 Hz Control voltage: 220 V Total power requirement: 18 kW Dimensions & Weight Machine dimensions (L x W x H): 3,300 x 1,500 x 1,450 mm Lubrication system dimensions (L x W x H): 830 x 650 x 1,000 mm Control cabinet dimensions (L x W x H): 700 x 1,500 x 1,750 mm Machine weight: approx. 5 t EQUIPMENT 5x feed rollers, wire holder 3 mm, two-finger Spring length measuring device (Model: LION PRECISION-PANTHER) Wire coil holder POST, motor-driven, mandrel holder (diameter: 1,400 mm) Lubrication system Control cabinet cooler RITA Hydraulic unit

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: W261, repeat accuracy: 0.05 mm, workpiece weight (max.): 6,300 kg, working length: 4,000 mm, working width: 2,250 mm, working height: 230 mm, No minimum price – guaranteed sale to the highest bidder! The machine’s last inspection was carried out by a specialist company at the end of 2025! The machine can be inspected while powered on. TECHNICAL DETAILS Working area X: 4,000 mm Working area Y: 2,250 mm Working area Z: 230 mm Working area for round part machining, diameter max.: 440 mm Working area for round part machining, length max.: 3,700 mm Number of cutting heads: 1 to 4 Cutting carriage distance: max. 1,150 mm Positioning speed, axis-parallel X, Y max.: 60 m/min Positioning speed, simultaneous max.: 84 m/min Cutting speed max.: 50 m/min Travel speed min.: 0.001 m/min Machine tolerance according to VDI/DGQ 3441: ± 0.1 mm/axis Repeatability: ± 0.05 mm/axis Load capacity of the frame max.: 7,000 kg Load capacity per grating bar: 110 kg Number of grating bars max.: 70 Hnsdpfx Aszcwupjpysn Workpiece weight, flat part max.: 6,300 kg Workpiece weight, round part max.: 500 kg MACHINE DETAILS Waterjet source: Bypump 50 APC Operating pressure: max. 3,800 bar Flow rate: 0 to 5 l/min Nozzle size in single-head operation: max. Ø 0.4 mm Nozzle size in dual-head operation: max. Ø 0.3 mm Nozzle size in dual-head operation: recommended Ø 0.28 mm Dimensions & Weight Machine dimensions (L x W x H): approx. 9,000 mm x 7,550 mm x 2,050 mm Weight: approx. 10,000 kg Operating Hours Operating hours: approx. 41,130 h Cutting hours Head 1 / Head 2: 13,720 h / 956 h EQUIPMENT CNC rotary axis Motorized cutting carriage distance adjustment Four-jaw chuck Abrasive hopper Spare parts PC with pre-installed programming software Note: The second head has been removed, and the cutting mechanism has been mounted on Head 1 as a spare part. However, after acquiring a new cutting head, the system can operate with two abrasive tools. The drilling spindle is seized. The crane and lifting device are not included in the scope of sale.

Condition: excellent (used), Year of construction: 1991, Ref:11067 . 1991 Wohlenberg 115 MCS-3 TV Guillotine. Last supplied fully overhauled 2011. Microcomputer programming with static back gauge - 1024 Data-blocks, 1-99 programmes with LED display. Semi or fully automatic cutting Side air tables L & R Central air table Cutting area illumination Variable pressure hydraulic clamp 2 x HSS knives Safety knife change device - machine assisted Overload device with safety bolt FFM guarding to U.K. HSE specifications Including tools, spares & manuals. Accessories: 2000 Polar LW 1000-4 pile lift 2000 Polar RA4 jogger with air removing roller. Specification: Cutting width, Max: 115 cm Clamp opening, Max: 14.5 cm Hnodpfx Apjydnw Doyen Depth of rear table, Max: 115 cm Cuts per minute, Max: 40 Clamp pressure : 2.5 - 40 kN Power requirement : 3 kW

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 17,958 h, machine/vehicle number: 0752101130704, degree of automation: automatic, pipe diameter (max.): 152 mm, power: 21 kW (28.55 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 10,000 kg, PRICE REDUCED to 230k!!!! We offer this used BLM LT FIBER EVO TUBE LASER laser cutting machine, year of construction 2021 with a 3kW fiber laser source. It has high-speed precise cutting and an integrated loading and unloading system. Suitable for steel, stainless steel and aluminium. It can cut complex shapes and profiles. Available for inspection and ready for immediate sale. Must be seen. Serial number: 0752101130704 Manufacture date: 10/2021 Supply voltage: 380 V Phases: 3 Supply frequency: 50 Hz Total installed power: 21 kVA Interrupting capacity: 25 kA Control voltage 1: 24 V Control voltage 1 type: DC Control voltage 2: 220 V Control voltage 2 frequency: 50 Hz Weight: 10000 kg If you have any questions or need more information, feel free to send us a message or give us a call. Hodpsyui Ekjfx Apyenn

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, conveyor belt length: 3,100 mm, conveyor belt width: 2,200 mm, total length: 3,100 mm, total width: 2,200 mm, power: 3 kW (4.08 HP), We offer this very good Blackman and White Versatech Cutting Machine, year of construction 2017. 2.2 x 3.1mtr conveyorised bed, with on board 3kw water cooled router and drag knife, with iCut camera registration system. Can be seen fully working and tested in Leicester UK. Price is ex works, we can put you in touch with the engineer who will provide a seperate and direct cost to move the machine. Hnjdpfx Apsx Ik Dceyon If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Bodor, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. Hnsdpfxehwaape Apyjn The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, functionality: fully functional, Year of construction: 2026, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Hnedpfx Ajhwaa Ejpyen Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Year of construction: 2011, condition: used, functionality: fully functional, Blackman & White Genesis 2300 Conveyor (DOM June 2011) Overall Size – 5m X 2m Cutting Window – 4.6m X 1.3m Max Cutting Speed – 1500mm/sec Pneumatic Oscillating Drag Knife with 1 spare tool head (Unsure on working state) Full Vacuum System (Single Zone) Leibinger JET3 Inkjet Marking System (NON WORKING) MasterCut 2100 CL Drive Software Included Alphacam 2012 Processable Materials Composite Pre-Preg Materials (Carbon Fibre , Glass Fibre, Kevlar) Textile Fabrics Low Density Foam Hnedezdkv Ijpfx Apyjn

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 6,000 h, control type: CNC control, degree of automation: automatic, controller manufacturer: Fanuc, laser type: CO₂ laser, laser source manufacturer: Fanuc, laser hours: 6,000 h, laser power: 2,500 W, sheet thickness steel (max.): 16 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 6 mm, LVD LASER ORION 3015 PLUS - 2.5kW Year of manufacture 2013 Hnjdpfx Apsy Av Nmoyjn

Condition: good (used), Year of construction: 2021, total width: 500 mm, total length: 800 mm, total height: 500 mm, overall weight: 65 kg, sheet thickness (max.): 40 mm, operating speed: 2,600 mm/s, Cutting machine CEVISA - CHP-12 MACH-ID 9406 Make: CEVISA Hnodpezcng Asfx Apysn Type: CHP-12 Year: 2021 Max. nominal thickness 40 mm Max. recommended thickness 20 mm Max. bevel length in several runs 18 mm Max. bevel length in single run 12 mm MIn. bevel inner diameter 100 mm   X Bevel K Bevel V Bevel Y Bevel High average cutters lifespan around 1000 M Self feed Zero maintenace Min. Beveling angle: 22.5° Max. beveling angle: 45° Min. plate thickness: 4mm Maximum sheet thickness:40mm Power: 3 HPkW Feed rate: 2600mm/min. Length: 800mm Width: 500mm Height: 500mm Weight: 65kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2013, total width: 500 mm, total length: 800 mm, total height: 500 mm, overall weight: 65 kg, sheet thickness (max.): 40 mm, input voltage: 3,000 V, operating speed: 2,600 mm/s, Cutting machine CEVISA - CHP 12 MACH-ID 9404 Make: CEVISA Type: CHP 12 Year: 2013 Max. nominal thickness 40 mm Max. recommended thickness 20 mm Max. bevel length in several runs 18 mm Max. bevel length in single run 12 mm MIn. bevel inner diameter 100 mm   X Bevel K Bevel V Bevel Y Bevel High average cutters lifespan around 1000 M Hnsdpfx Aozcngcepyjn Self feed Zero maintenace   Min. Beveling angle: 22.5° Max. beveling angle: 45° Min. plate thickness: 4mm Maximum sheet thickness:40mm Power: 3 HPkW Feed rate: 2600mm/min. Length: 800mm Width: 500mm Height: 500mm Weight: 65kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 7411231, Size 92 cm, Program, Spare knife, big side tables Machine no: 7411231 Hnsdpfxswnqwcs Apysn

Condition: used, In this offer you purchase a used cutting system "Fotoba FHS42 PW" Object of sale: 1 x Fotoba FHS42 PW suitable for: HP Pagewide Pro XL 10000 HP Pagewide XL 8000 Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Hedpfeqmm D Sox Apysnn Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Year of construction: 2004, condition: used, Useful lenghtt: 4200 mm blade diameter 500 mm Hodey Hifcjpfx Apyjnn

Condition: used, Technical data paper roll cutting machine. This machine can only be used for small residual rolls up to a maximum diameter of 400 mm in order to automatically unwind these residual rolls and cut the paper into strips so that it can be better pressed into bales. Manufacturer unknown Type unknown Year of manufacture unknown Hjdpeu Tg Spefx Apyjnn Dimensions feed table for rolls: Width inside of rolls 2.195 mm Height inside of castors 465 mm Transport dimensions Feed table over all: 2,650 x 1,300 x 2,150 mm (W x H x D) Dimensions roller cutter: Width cutting shaft inside 2.250 mm Transport dimensions of the roll slitter over all: 3,050 x 1,550 x 550 mm (W x H x D) Remarks: There are no further data or documents available. A viewing is possible by appointment. We assume no liability for the technical data and possible errors.

Condition: new, Year of construction: 2025, Laser cutting machine cnc 3 axis this machine is also for profile, tub and different shape. we can deliver machine also with automatic magazin for un-mand production. Effective cutting diameter for round pipes: Ø10 mm – Ø225 mm Effective cutting size for square pipes: □10 mm – □225 mm X/Y/Z axis travel: 270 / 6,900 / 230 mm X/Y/Z axis motor power: 0.75 / 2.9 / 0.75 kW Positioning accuracy: ±0.1 mm Repeatability accuracy: ±0.1 mm Maximum travel speed Y axis: 110 m/min Universal maximum rotation speed: 120 r/min Maximum acceleration: 1.5G Maximum pipe feed length: 6,200 mm Maximum load weight: 300KG Total electrical power of the machine: 22 kva Machine size: 10.400 x 2.180 x 2.400 mm The weight of the machine: 3 ton Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland Hsdpjktffzjfx Apyjnn

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 18,948 h, machine/vehicle number: A0215A0087, laser power: 2,000 W, sheet thickness steel (max.): 12 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 75 mm, No minimum price – guaranteed sale to the highest bidder! A maintenance checklist from December 2025 is attached! The defects listed there have been completely rectified (see attached activity report from Trumpf)! TECHNICAL DETAILS Working area X-axis: max. 3,000 mm Working area Y-axis: max. 1,500 mm Working area Z-axis: max. 75 mm Speed X: max. 60 m/min Speed Y: max. 60 m/min Speed Z: max. 60 m/min Simultaneous speed X/Y: max. 85 m/min Sheet metal thickness, steel: max. 12 mm Sheet metal thickness, stainless steel: max. 6 mm Sheet metal thickness, aluminum: max. 5 mm Workpiece weight: max. 575 kg MACHINE DETAILS Control system: B&R Arnco Laser type: TruCoax 2000 Laser power: 2,000 W Dimensions and weight Footprint (L x W x H): 7,400 x 3,300 x 2,300 mm Hjdpfx Apjzdp Ntsysnn Transport width: 2,464 mm Weight: 9,000 kg Electrical connection: 65 kVA Operating hours (as of December 17, 2025) Operating hours, laser: 18,948 h Laser beam on-time: 3,635 h EQUIPMENT Closed machine frame with integrated laser head Motion unit for high-precision machining Drives with maintenance-free three-phase servo motors Sheet metal support accessible from both sides Enclosed beam guidance Fully integrated cooling unit Traveling extraction system Collection container for falling parts under the working area Positioning laser diode FocusLine

Condition: as good as new (ex-display), functionality: fully functional, Very nice paper cutter for sale. Brand: Eba, type 10/550 CNC. Equipped with a hydraulic pressing system, air table, light beam, geared mechanism, and manual operation, 220 volts. Hodpfx Apjzc I Exsyenn This machine comes from a government office and has been used very little. It is in as-new condition. You are welcome to test this machine at our location. We can arrange the transport and packaging for you and load it into a truck or container. Please inquire about a price including transport (location within the Netherlands). Regards, Henk Hoos.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, Polar 78 X Year of manufacture: 2004 Cutting width: 78 cm Air table with side tables Program Spare blades Lighting units Immediately available Hedpfszdvg Ssx Apyonn

Condition: used, Year of construction: 2012, Automatic loading table Milling unit with 10 spindles, also inclined Swing machine FOM Spring 50 blade 500 mm horizontal Automatic unloading table Hnodpfoy Egzxox Apyon

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2018, laser power: 8,000 W, Manufacturer: TRUMPF Type: TruLaser 3060 fiber (L66) Year of manufacture: 2018 Working area 6000 x 2500 x 115 mm Laser power: 8000 watts Control: Siemens Sinumerik 840D SL Standard equipment Machine ⦁ Working area 6000 x 2500 mm ⦁ Closed machine frame ⦁ Integrated cabinet with roller shutter ⦁ Automatic pallet changer in longitudinal direction ⦁ Gantry drive combined with linear direct drives ⦁ Closed beam guidance via laser light cable (LLK) ⦁ Cooling unit ⦁ Integrated control cabinets ⦁ Longitudinal conveyor belt ⦁ Work area lighting ⦁ Positioning laser diode ⦁ Spraying system ⦁ PierceLine ⦁ FocusLine ⦁ NitroLine ⦁ PlasmaLine ⦁ Automatic nozzle cleaning Extended features: ⦁ External TruDisk 8001 solid-state laser with 1 LLK output (includes BrightLine fiber and Fusion Cut Performance Package) ⦁ DetectLine ⦁ Drop & Cut ⦁ Advanced Condition Guide sensors ⦁ Cameras 1+2 Hnjdpewl I Tvofx Apyon ⦁ Cross conveyor ⦁ Wireless Operation Point ⦁ Dust protection for device plate ⦁ High-speed cutting package ⦁ Copper cutting package - O2 and N2 cutting data ⦁ Brass cutting package - N2 cutting data ⦁ Smart Collision Prevention (only in conjunction with TruTops Laser or TruTops Boost)

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, Laser power: 40000w/30000w/22000w/20000w/12000w/6000w/3000w Applicable Material: metal Condition: New Laser Type: Fiber Laser Cutting Area: 4000mm*2000mm Cutting Speed: 200m/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cooling Mode: WATER COOLING Hjdog Db Ufopfx Apyenn Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz 1. Automated Nozzle Changer The machine changes its nozzle within 35 seconds at the fastest speed - this saves 50% of time costs. 2. Active Anti-collision Function Effectively reduce the damage rate of laser heads, help you save maintenance cost.

Condition: good (used), functionality: fully functional, Year of construction: 2006, machine/vehicle number: 2540, laser type: CO₂ laser, laser source manufacturer: BYSTRONIC, laser source model: BYLASER 4400, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, power: 52 kW (70.70 HP), input voltage: 400 V, input current: 125 A, input frequency: 50 Hz, overall weight: 12,000 kg, total length: 13,000 mm, total width: 6,000 mm, total height: 2,200 mm, Equipment: documentation/manual, BYSTRONIC BYSTAR 3015 laser cutting machine Hnodpfszdzi Sjx Apysn - including dust extraction system and Donaldson dust collection system, as well as a pallet changer and a BYSTRONIC BYLOADER 3015 loading system - Cutting head Z-axis travel: 170 mm - Max. load capacity of pallet changer: 890 kg - Max. material thickness that can be cut: steel: 0.8 - 25.0 mm, stainless steel: 0.8 - 20 mm, aluminum: 0.8 - 12 mm Note: the machine can be transported on a standard truck! Note: the item must be collected between August 4th and August 13th, 2026, on a date to be confirmed. FCA D-79268 Bötzingen - loaded onto a truck

Year of construction: 2020, condition: excellent (used), Cabbage shredders S65 Cabbage cutting machine 2020, Stainless, cabbage shredding machine, with two top mounted de-stalkers, 5000kgs - 7500kgs per hour, disk diameter 650mm can be used for whole large cabbage heads, mobile, 3Ph Hnedpoy H Hm Rsfx Apysn