Used Cutting Saw for sale (15,793)

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, mobile circular saw for cutting bricks with extraction Fgodpsv Ivx Tefx Al Sjh

Condition: used, - 2250 mm cutting width Fsdpfjhkm A Nox Al Sogh - 80 mm cutting height - 2 x 3.7 kW saw motors

Condition: good (used), Crosscut and miter saw, pull saw, crosscut saw, panel saw, crosscut and miter saw, radial saw, radial arm saw -Manufacturer: Elu, cross-cut and miter saw with table on solid base, mobile -Type: MGS 72 -Motor power: 0.85/1.2 kW -Speed: 1050/2100 rpm -Saw blade: Ø 305 mm -Cutting height: max.110 mm -Cutting width: max. 120 mm -Miter. 45° on both sides -Dimensions: 2100/840/H1180 mm -Total weight: 190 kg Fgjdpfx Alepcmths Ssh

Condition: used, Automatic Hacksaw SILISTRA / BULMAK Type OH 254 Hacksaw with material feed Fgjdpfx Aljwb Hxvj Soh Machine No. 862919 Year of manufacture: 1986 Cutting capacity - Round Ø 250 mm Cutting capacity - Square 250 x 250 mm Stroke rates 40 - 50 - 63 - 80 - 100 - 125 strokes/min. Saw blade length 450 mm Motor power 1.5 and 2.2 kW, pole-switchable Electrical connection 380 Volt, 50 Hz - Straight cutting automatic machine designed exclusively for 90° cuts - Saw motor with 2 speeds and 3 V-belt stages - Saw bow with hydraulic lowering and lifting - Hydraulic cutting pressure adjustment via throttle valve - Length stop via manually adjustable fixed stop (electrical contact stop) approx. 800 mm - Vise feed with electric feed drive using leadscrew for automatic material transport - Hydraulic material clamping with stepless clamping force adjustment - Coolant unit integrated in machine base - Electrical control cabinet positioned next to the machine Required floor space (L x W x H): 2000 x 1800 x 1400 mm Weight approx. 900 kg

Condition: used, Miter saw for aluminum, EISELE, Type LMS II HVG-225 Machine no. 0107, year of manufacture 1980 Cutting range: 90° = 150 x 100 mm 45° = 120 x 100 mm Saw blade diameter: max. 400 mm Miter cut: +/- 45° Saw blade speed: 1700 / 3400 rpm Motor power: 1.4 / 1.9 kW Power supply: 380 volts, 50 Hz Table size in front of the stop angle: 580 x 350 mm Fgjdezinzrspfx Al Soh - Motor type RF 1.5 / 4 / 2-7 - Saw unit for shifting cut, tiltable 45° to the left - Machine equipped with a saw blade for aluminum, Ø 400 mm - Hose connection for chip extraction, Ø 80 mm - Sturdy metal base Space requirement (L x W x H): 1050 x 1020 x 1700 mm Weight: 150 kg In good condition

Condition: new, Year of construction: 2026, warranty duration: 12 months, TRSI Monoblock Integrated Pusher – The Top of the Range in Europe If you are looking for an innovative, fast, and reliable automatic optimizing crosscut saw, the TRSI is the ideal choice. Fully customizable to meet your specific needs, it is designed for fixed-length or optimized cutting, making it suitable for a wide range of industrial applications. Ideal for Various Industries Packaging – Precise cutting of single boards or bundles, also perfect for trimming plugs. Windows and Doors – Advanced optimization to select quality and defects, minimizing waste. Fjdpov Iqcmsfx Al Segh Furniture – Millimetric precision for cutting finished semi-finished products with maximum quality. Flooring and Parquet – High-precision cutting for wooden flooring applications. Cutting-Edge Technology The TRSI is equipped with an advanced programming software that simplifies operations and optimizes production processes: Fixed-Length Cutting: Predefined sequences for repetitive and precise machining. Optimized Cutting: OL Version: Length-based optimization to minimize waste. E Version: Full optimization with defect elimination to maximize yield. Customizable Optimization Priorities: Choose between commercial value, waste reduction, quantity, length, or a mixed strategy. Immediate Integration with company management systems without additional interfaces. Online Remote Assistance for continuous technical support. Intuitive HD Touchscreen with USB data import capability. Industrial CNC Computer ensuring uninterrupted production. Ultra-Precise and Fast Movement High-speed pusher system on steel linear guides with ball recirculation and double carriage, ensuring smooth and precise movements. High-performance brushless motors for superior speed and reliability. Reinforced structure for flawless movement, eliminating vibrations and slippage. Protected stroke with visible pneumatic lifting, allowing maximum control in every cutting phase. Powerful and Reliable Cutting Unit Robust aligner with integrated silent blower for a more comfortable working environment. Pneumatic pressure system on linear guides with ball recirculation for perfect holding. Multiple rubberized wheels with oil-bath clutch, ensuring maximum grip and preventing slippage. Accessories to Maximize Productivity Custom loaders to eliminate downtime and boost efficiency. Manual and automatic printers for clear and precise marking of semi-finished products. Optimized unloading systems tailored to specific processing needs. Trust Cursal for Uncompromising Production Efficiency With the TRSI, your company can achieve unprecedented levels of efficiency and precision. Discover our accessories, loaders, and unloaders to customize your system and optimize every stage of the cutting process. Contact us today for a customized consultation and take your production to the next level.

Condition: new, Model Name Shark 282 CCS Fgsdpfx Aogvkbcol Seh

Year of construction: 1998, condition: good (used), machine/vehicle number: 080024-38 U, Offer 23332 Fedpfx Aep Ebn Sel Segh Technical data: - Saw blade dimension 250 x 2 x 40 mm - Saw blade spindle speed 52 rpm - cutting range at 90° round 80 mm - flat 95 x 60 mm - miter adjustable up to 45 ° - Material vice - Drive 400 V / 0,5 kW - Space requirement approx. W 650 x H 1500 x D 750 mm - Weight approx. 100 kg

Condition: new, Model Name SHARK 331-1 NC 5.0 SPIDER Fedpel Sva Ijfx Al Ssgh

Condition: used, Year of construction: 1997, machine/vehicle number: 972842, SECOND-HAND SEMIAUTOMATIC CROSS CUTTING SAW TRV 500 - CE RULES - Mobile pressure system - Right/left feeding - Conveyor belt TSLR 6000X400 - N. 3 unloading tables mm. 1000x1200 - Waste belt conveyor TSS 45° mm. 2500 - Strapping machine SIVARON SS-80 Fgedswr T Rmepfx Al Sjh - Year 1997

Condition: new, Year of construction: 2026, Working width: 600 mm Working height: 220 mm Minimum workpiece length: 250 mm Units: 4 1. Saw cutting unit, Random System: Saw cutting head 2. Brush: Metal, diameter 220 mm 3. Brush: Tynex grit 60, diameter 220 mm 4. Brush: Tynex grit 120, diameter 220 mm Height adjustment: Handwheel Height indicator: Mechanical counter Feed rate: 4 - 12 m/min Motor power, saw cutting unit: 1.1 kW Fsdpfx Aljhwrp Rj Segh Motor power, brushes: 4 kW Motor power, feed: 0.37 kW Machine length: 2800 mm Machine width: 1500 mm Machine height: 1600 mm Weight: 1500 kg

Condition: used, Cross-cut saw BERG & SCHMIDT Junior 275 -used- Underframe, carriage ----- Technical data ----- Cutting height: 60 mm, Fgsdpfx Asu R S I Hol Sjh Voltage: 230 V

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 1,200 mm, overall weight: 600 kg, total width: 1,100 mm, total height: 1,400 mm, warranty duration: 12 months, Equipment: saw blade guard, Saw blade diameter: 350-800 mm Saw blade arbor: 30 mm Working height: 900 mm Cutting heights: see brochure Fgedpez A Th Ujfx Al Soh Cutting widths: see brochure

Condition: used, Double Head Cutting Saw – FOM ALVA 450 B Professional double head saw for cutting aluminium, PVC and light alloy profiles, ideal for window and door production. Year: 2002 Carbide blades Ø 450 mm Three-phase motors 3 HP (2.208 kW) – 2800 rpm – 230/400V – 50 Hz Direct transmission motor – carbide blade Blade shaft Ø 32 mm Head inclination: 90°   45° external   22.5° external   Intermediate angles with mechanical stop and reading on graduated vernier First head fixed Second head mobile: automatic positioning with manual option Positioning speed (automatic) of the mobile head: 12 m/min Positioning accuracy of the mobile head: +/- 0.1 mm Minimum cutting capacity between the two heads: 300 mm (reducible with dedicated program) Maximum cutting capacity between the two heads: 4000 mm Hydro-pneumatic blade feed (adjustable forward speed – rapid return) Electrical panel separated from pneumatic panel Dual operating pressure with low-pressure servo control Air consumption per working cycle: 28 Nl Fjdpfx Aljyyliko Sjgh Vertical and horizontal pneumatic clamps Mist lubrication system Prepared for chip and fume extraction Operating pressure: 7 bar (adjustable) Roller table for mobile head (3 m) Machine in working condition.

Condition: new, Year of construction: 2026, Upgrade your aluminium production to a high-technology, high-efficiency, high-safety saw. X45 is an advanced high-accuracy up-cut saw for small-profile cutting of straight or mitered aluminium parts up to ±85°. Two-hand button-press cutting with full saw guarding (including tunnels on each side) preventing access to the cutting area. Category 3 safety design with a dual-channel safety relay and a reset button. Electronically settable up-stroke point to any position (without a sensor) for shortest cutting distance. Fgsdpfx Alov Iccfe Sjh Advanced chip collection design with up to 94% chip collection efficiency and up to 8× less chips to clean from your saw / floor compared to traditional saws. • Ø450 mm TCT saw blade with powerful 3.0 kW drive motor • Ergonomic usage design with blade changed from the front of the machine • AS / NZS 4024:2014 Category 3 safety standard, with safety relay and two-hand cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up • Electronic lockout of the blade / machinery panels preventing access to rotating assemblies also during spin-down. • Safety switch detection of opening of the access panels triggering an e-stop. • 2× vertical and 2× horizontal clamps with adjustable clamp pressures. • Adjustable saw mitre angle to ±85° • Moveable back fence for increased cutting capacity • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm points for chip collection • Optional 3.8 kW vacuum chip extractor

Condition: used, SECOND-HAND MANUAL CUTTING SAW MM. 350 Fgsdpswr Uk Isfx Al Ssh

Condition: used, Year of construction: 1983, functionality: fully functional, machine/vehicle number: 8384, total length: 144,400 mm, total width: 4,400 mm, total height: 4,000 mm, used Holtec miter saw, in operation until recently. Fgjdpfjzp Rn Uox Al Sjh

Condition: used, Year of construction: 2002, cutting height (max.): 100 mm, cutting width (max.): 2,500 mm, saw blade diameter: 400 mm, saw blade bore: 50 mm, total length: 4,400 mm, total width: 3,600 mm, total height: 1,100 mm, overall weight: 1,500 kg, No. 3270 Double cut-off saw Eima 122 Used, year of construction 2002 Double cut-off saw / double crosscut saw 2 motors, 4.4 kW Both saw units are swiveling Maximum saw blade diameter 400 mm Bore 50 mm Cutting width 210 - 2500 mm Cutting depth 2500 mm Cutting height 100 mm Vacuum suction for workpiece clamping Automatic width adjustment defective, cutting width is currently adjusted using the hand crank Installation dimensions approx. 4400 x 3600 x 1100 mm LWH Fodpfx Aloy Ef Hye Segh Weight approx. 1500 kg Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: new, Year of construction: 2025, Semi-automatic optimising crosscut saw with electronic positioner with push-stop mode COSTCUTTING OPTIMIZING SAW Superpush 150 is the centre for the cutting and entry level optimisation. It is designed as the true technological evolution of traditional cutting methods, able to increase productivity and improve wood yield. EXTREMELY ROBUST Very robust and reinforced steel structure. Horizontal plane with mobile protection to favour the loading of the work piece. Carriage with custom-made stop function and pusher. Linear unit composed by toothed belt with steel cables inside and sliding guide with linear bearings. Horizontal and continuous piece deposit plane with width mm. 300. TECHNOLOGICALLY INNOVATIVE Electronic system composed by a touch screen panel with integrated NC. Software running on Linux with customized interface. Colour display 15,6”, resistant TOUCH SCREEN for a complete safety in industrial environments. Programs import via USB Possibility of Tele-service through internet. + Macro Excel. FAST Software S4U Lite Brushless positioner motor with digital servo-driver. Quick selection interface Stop/Pusher Adjustable cutting speed. RELIABLE AND SAFE Movements with sliding bearing with double anti-dust protection. Electric box separated from the machine and self-standing. Independent pneumatic regulations to adapt to different types of working. Two-handed safety manual control. Machine certified "CE" by the Certifying Agency, not self-certified. Fgedpfxeg Hzvgs Al Seh

Condition: good (used), Year of construction: 1996, Offer 25115 Technical Data: - Saw blade diameter: 400 mm - Saw blade speed: 3000 rpm - Cutting height up to approx.: 125 mm - Cutting depth up to approx.: 600 mm - Bevel adjustable on 2 axes - Table size approx.: W 800 x D 800 mm Fsdpfswn D Emox Al Sjgh - Table height: 920 mm - Drive: 400 V / 1.5 kW - Space requirement approx.: W 800 x H 1900 x D 1100 mm - Weight approx.: 200 kg

Condition: new, Year of construction: 2026, Combination saw-milling machine minimax st 3c F 16 Swiveling saw blade, swiveling milling spindle, and format sliding table made of anodized aluminum Stable steel cast iron construction Large support surface and precise cast iron table High-precision format sliding table made of anodized aluminum (travel 2250 mm) Large rip fence frame (900 x 600 mm) with an extendable aluminum telescope stop up to 2660 mm, featuring professional stop flaps Max. saw blade diameter 315 mm with scoring device, swiveling from 90° to 45° Saw parallel fence with fine adjustment Stable saw unit and large dimensioned double-bearing milling unit ensure maximum stability, precision, smooth running, and long service life Solid and precise machine table made of stress-free cast iron Three milling speeds, manually adjustable from 3500 - 10000 min⁻¹ With right-hand/left-hand rotation of the milling spindle Standard arc milling guard Safety flip stop jaws made of aluminum Two motors with high power reserves Two plug-in handwheels for convenient and quick operation Dimensions and weights Weight approx. 470 kg Dust extraction connection Dust extraction port diameter 2 x 120 mm Dust extraction port diameter saw blade guard 60 mm Electrical data Power of drive motor 2 x 5.0 kW Connection voltage 400 V Mains frequency 50 Hz Milling spindle Spindle inclination 0 – -45 ° Usable length of the spindle 100 mm Spindle speeds 3500/7000/10000 min⁻¹ Milling tool diameter max. non-tilting 210 mm tilting 180 mm dovetail milling 275 mm Circular saw unit Rip fence length 1600 mm Cutting width with parallel fence 900 mm Max. crosscut width to the left of the saw blade 2660 mm Saw blade inclination 90 45 ° Max. cutting height 90° 90 mm Max. cutting height 45° 63 mm Max. saw blade overhang 90° 100 mm Max. saw blade overhang 45° 78 mm Diameter (main) saw blade 315 mm Explanation diameter (main) saw blade: independent of the scoring saw Speed (main) saw blade 4000 min⁻¹ Sliding table and table Table length 1112 mm Table width 430 mm Fsdpohp Rdlofx Al Ssgh Scope of supply: Arc milling guard Anodized aluminum format sliding table Aluminum stop jaws Flip stops Location: In stock at 54634 Bitburg - immediately available -

Condition: new, Touch - Screen 7” in Color Programming directly via Touch Screen chalk line cutting working according to program 1 pcs pusher for cut off pieces hydraulic saw blade movement machine according to CE norm brake motor safety & noise protection hood incl. 1pcs HM saw blade saw motor 7,5 kW, 400 V, 50 Hz saw blade DM 500 mm work piece feeder system with toothed belt feed speed 120 m/ min cutting accuracy +/- 0,8 mm cutting capacity up to 100 cuts/ min min work piece length 550 mm min. work piece width 40 mm Fedpedify Iefx Al Sogh Option: - additional infeed table - additional out feed table - TCT saw blade DM 500 mm

Condition: as good as new (ex-display), Hans Schreiner Metal Bandsaw - Demonstration Machine! Hans Schreiner metal bandsaw with pivoting arm, designed for professionals. Features include smooth hydraulic feed for precise cutting pressure, electric coolant system, suitable for all metals, steels, and stainless steel. Equipped with quick-action vise, automatic cut-off, selectable automatic or manual operation. Comes with stand and reinforced frame for increased stability, CE compliant. Technical data: Motor output S6 1900 W (1500 W S6-100% duty cycle), wheel diameter 380 mm, saw blade dimensions 3160 x 27 x 0.9 mm, swivel range 45° left, 60° right, max. cutting capacity at 90°: 370 x 220 mm, cutting speed: 34 / 68 m/min, packaging dimensions (L x W x H): 1770 x 765 x 1120 mm, weight: 365 kg Fgjdpfevrvu Asx Al Sjh Representative image. Prices subject to change. Errors, misprints and omissions excepted.

Condition: good (used), Year of construction: 2012, I sell the automatic pneumatic end cutting saw KuangYung PX60 CFS 200B, year 2012. Motor power 7,5kW Input table automatic feeding 5,10m (throughfeed system) Outut table 9,20m 5 pcs. kickers on left outfeed table Fjdpfjppwx Eex Al Sjgh Total length: 15,50m Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. CE version. Documentation included.

Condition: excellent (used), Max cutting width: 560 mm Fedpfxoxz Up He Al Sogh Max cutting height: 100 mm Motor: 7.5 kW Year of manufacture: 2007 Blade diameter: 700 mm (max 750 mm) Two-hand control Pneumatic clamp