Aluminum cutting saw

Emmegi Clasic Linea VIS 67 TU/6

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Urban ESB 500 corner and scissor drilling unit with drill heads for Siegenia fittings Nodpfx Aoyza Dfjazedb

Condition: new, Year of construction: 2026, Miter saw and cut-off saw, type: ZS 200 N - 5 KW motor with machine stand, but without saw blade Machine operated via handwheel and worm gear (rear) Tilting Saw blade diameter: 520 mm, saw blade arbor bore: 50 mm Saw blade speed: 2800 rpm 400 volts / 5 KW (S6/40%) motor with brake and automatic star-delta motor switching Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: when tilted: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees when tilted: 140 mm The saw can be tilted to an acute angle of approximately 25 degrees on one side and tilted flat to the left up to 30 degrees. Nsdpoi Dfidjfx Aazedb Machine weight: approx. 250 kg Location: Available from stock in 54634 Bitburg - immediately available -

Year of construction: 2012, condition: excellent (used), functionality: fully functional, - Power (kW): KFB 353 = 1.5 Njdpfewzivdsx Aazodb - Voltage (V): 400 - Air pressure (bar): 7 - Air consumption (l/min): min. 250 - Revolution shaft (min-1): KFB 353 = 12,000 - Maximum cross section of the workpiece WxH(mm):190x111 - Milling range L x W (mm): 300 x 130 - Milling depth (mm): 200 - Machine dimensions L x D x H (mm): 3,500 x 820 x 1,650 Dpro2J - Weight (kg): approx. 420 - Workable material: KFB 353 = PVC and aluminum profiles

Condition: excellent (used), Notching saw GRAULE AS450 Shipment EU ~300euro Ndsdpfx Aasl Skkfjzeb

Year of construction: 2004, condition: good (used), machine/vehicle number: 2004-3-11A, - Feed of the milling head manually - Work table height adjustable via handwheel - Horizontal and vertical material clamping - Milling cutter diameter up to 250 mm - Max. milling height 150 mm Ndsdpfxjf E Higo Aazeb - Max. milling depth 80 mm - Max. milling length 305 mm - Angle-adjustable stop, left and right 20 - 90° - Milling spindle speed 4500 rpm - Drive 400 V, 3.2 kW - Compressed air connection 6 - 8 bar - Air consumption per working cycle 10 l - Pneumatic profile clamping - Table stand - Space required approx. W 1100 x H 1300 x D 700 mm - Weight approx. 200 kg

Condition: used, Year of construction: 2012, No. 3268 Cutting and machining center Schirmer BAZ 1000-G6 / VU “Basic” Used, year of construction 2012 Consisting of: - Cutting and machining center Schirmer BAZ 1000-G6 / VU “Basic” - Automatic steel cutting machine Schirmer SZA 450 - Buffer screw station Schirmer - Bar machining center Schirmer SBZ I Cutting and machining center Schirmer BAZ 1000-G6 / VU “Basic” - Cutting length 300 - 3900 mm - Automatic feed magazine for 9 profiles up to 6500 mm in length - Automatic transfer station - Loading device for PVC profiles up to 6500 mm in length with NC-positioned gripping tongs, positioning speed up to 150 m/min - Profile length measuring device incl. optimization software - Automatically adjustable profile guides - Machining station designed as a G-module “Ultra Speed” Nedpfxey Nnnns Aazjdb Machining operations on the PVC profile: - Drainage and ventilation slots/holes in the frame, sash, and mullion profiles; handle olive holes for front doors; lock plate markings; lock case cutouts - Height measuring device for detecting profile tolerances - Seal cutting device - VU sawing unit with dual sawing unit 2x 45° - Sawing unit in standard configuration with 1 sawing unit, swivel range +45° to -45° - Conveyor belt for waste removal - NC-controlled gripping tongs for bar removal, positioning speed up to 180 m/min - PC machine control: 7-slot ATX industrial PC, Microsoft Windows XP Professional, software: TwinCAT NCI - Horizontal recirculating buffer for transporting profiles to the steel insertion station and screwing station for the steel insertion station with 8 insertion slots - Monitor for displaying steel lengths - Automatic label printer Automatic steel cutting machine Schirmer SZA 450 - Automatic feed magazine, max. profile length 6000 mm, profile width 25 - 50 mm, profile height 15 - 60 mm, wall thickness max. 4 mm - Insertion device - Standard sawing unit for 90° cuts - Automatic bar discharge - Belt conveyor - Extraction device - Steel scrap processing - Steel length measurement in the steel loading magazine Buffer screw station Schirmer - Feeding device for PVC profiles up to 3900 mm in length - Automatically adjustable profile guides - Screw station - Steel feeding fingers for reinforcement profiles up to 200 mm insertion depth Bar machining center Schirmer SBZ I - Feeding device for PVC profiles up to 3900 mm in length, speed up to 180 m/min - Automatically adjustable profile guides - Measuring probe for automatic determination of the zero point at the start of the profile - Drilling station with 4-axis CNC control, 2 vertical axes, 1 horizontal axis, and 1 axis for X-feed - NC-controlled gripping tongs for bar transport, positioning speed up to 180 m/min - Special-design belt conveyor for cross-feed - Sash visualization software including monitor - Screwing station with screw feeder - Guide rail with balancer for bar screwing unit - Bar screwing unit with automatic screw feed Machine capacity: Approx. 120 window units 1400 x 1500 mm/8 hours If the machine is expanded with an additional screwing unit at the buffer screwing station, the capacity increases to approx. 160 units/8 hours Sale on behalf of customer, ex location near 30625 Hannover, without dismantling, without transport and assembly To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment For used machines, any warranty is excluded, the following applies: “sold as seen”

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, input voltage: 400 V, stroke length: 300 mm, operating speed: 90 mm/s, throat depth: 1,000 mm, total length: 4,540 mm, total width: 1,900 mm, total height: 2,950 mm, overall weight: 16,500 kg, travel distance X-axis: 1,000 mm, controller manufacturer: Lenze, controller model: 9300, working width: 4,520 mm, bending force (max.): 150 t, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 2,900 mm, distance between stands: 3,200 mm, installation height: 950 mm, control type: CNC control, back gauge adjustment: CNC-controlled, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, safety light barrier, SafanDarley press brakes are innovative and highly efficient machines on the market, designed for sheet metal processing by the Dutch manufacturer. The precision of bending and reliability have been recognized by users in Poland and worldwide. SAFAN E-Brake is a series of machines equipped with an electric drive, which has been successfully used in our machines for almost 30 years. Currently, the largest model of press brakes with an electric drive is available with a capacity of up to 300 tons and features a patented design by the manufacturer. Lenze motors and servo motors, controlled by long-life frequency inverters, enable fast and reliable operation of the system for many thousands of operating hours. Thanks to the innovative drive, the machine consumes electrical energy primarily during the downward movement of the slide and the bending process. The slide returns using the force generated by springs mounted on both sides of the machine. Even when idle, the machine virtually does not consume electrical energy, as the system does not have a hydraulic pump motor to maintain pressure, as in hydraulic press brakes. We estimate that the electrical energy consumption is up to 70% lower than in conventional hydraulic press brakes. In addition, the electric drive is insensitive to temperature differences that may occur in production halls. Ndedpfxsx Ewnps Aazsb The machine performs excellently in both long and short production runs. Safan E-Brake 150-310 model 2009 - Capacity: 150 tons - Bending length: 3060mm - Controller: Safan E-Control - Bending system in 2D mode - 17” color AcuTouch touchscreen monitor - Service panel on a movable arm - Y1/Y2 axis controlled by CNC Back gauge: - X1-X2 axis controlled by CNC - R1-R2 axis controlled by CNC - Z1+Z2 axis controlled by CNC - Upper tool adapter Wila (hydraulic clamp) - Lower tool adapters Wila (hydraulic clamp) - Lightguard safety system with the option to control the upper beam descent - Work area lighting at the front and rear of the machine - Electrical installation 3/N/PE 50 Hz 400/230 V - Opening: 690mm - Distance between machine frames: 3300mm - Machine dimensions (L x W x H): 4450x2120x2900 - Weight: 16,500kg

Year of construction: 1987, condition: good (used), for cutter Ø up to max .: 300 mm Saw stroke adjustable by hand: 550 mm Ndsdpsghl Emofx Aazeb Infeed by hand via spindle: 150 mm Height adjustment by hand via spindle approx .: 130 mm Table semicircle Ø: 500 mm Saw blade drive: 380 V, 2.2 kW Saw blade speed: 2700 rpm Space requirement approx .: 1000 x 900 x 1300 mm Weight approx .: 100 kg

Condition: ready for operation (used), Year of construction: 2003, operating hours: 57,202 h, pressing force: 173 t, stroke length: 365 mm, total height: 3,100 mm, overall weight: 18,000 kg, controller manufacturer: TRUMPF, number of axes: 8, This 8-axis TRUMPF TrumaBend V170 press brake was manufactured in 2003. It features a pressing force of 1700 kN, a stroke of 365 mm, and a maximum bending length of 4080 mm. The distance between columns is 3680 mm. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V170 machine we have for sale. Contact us for further details regarding this machine. Machine Benefits Technical Machine Benefits • Distance between column: 3680 mm • Distance beam - table: 535 mm Extra Information Machine still under power Technical Specification Bending Length 4080 mm Dimensions Machine Depth 5000 mm Ndedpex D Ilyofx Aazob

Condition: excellent (used), Year of construction: 2013, operating hours: 150,494 h, functionality: fully functional, GRAF welding and cleaning line, year 2013. Working direction from left to right. SL4U four-head welding machine, max. dimensions 2800 x 3200 mm, min.400 mm, flash 0.2 mm. WP CNC 2 TR cleaning machine. Cooling station. Knives for cleaning flat, grooved and smooth surfaces. It has only performed 150,494 cycles - very good technical condition. Ndedpfx Aoyyxvwjazob