Used Cyclone for sale (236)

Year of construction: 1990, condition: good (used), Short/ Nest Line Capacity - 400 kg/h 1. Silo - cyclone 2. Big silo 3. small silo 4. Mixer Gkjdpfjn Arzkex Al Ssc 5. Extruder 6. Chain with dough buckets 7. Dryer 8. output transporter 9. Chain conveyor for buckets - 2 pcs 10. Elevator (at the end of the line) 11. Trans, strip of finished product 12. Comand pult 13. El Cabinet 14. Automatic packing Unit

Condition: new, Year of construction: 2014, functionality: fully functional, UNUSED TEMA INDUSTRIAL DRYING PLANT – FLUID BED DRYER – COMPLETE SYSTEM A complete "Industrial Drying Plant manufactured by TEMA Process B.V. (Netherlands)" is available for sale. The system is based on a Shaking Fluid Bed Dryer technology and was originally designed for drying industrial materials such as sludge, minerals, chemical feedstocks and other high-moisture industrial products. The equipment has never been installed or commissioned and has been stored since delivery. Operating hours: 0 This is not just a dryer, but a complete industrial drying plant including conveying, filtration and control systems. --- # General Information Manufacturer: TEMA Process B.V. (Netherlands) System type: Shaking Fluid Bed Dryer / Cooler Year of manufacture: 2014 Condition: Unused – Never installed – Stored since purchase --- # Capacity * Water evaporation capacity: approx. 2.1 t/h * Dryer feed capacity: approx. 12,000 kg/h * Final product output: approx. 1,900 kg/h --- # Moisture Range Feed moisture: 40 – 60 % Final moisture: 10 – 15 % --- # Drying System * Shaking Fluid Bed Dryer with integrated cooling section * Drying air temperature: 120 – 250°C (nominal 190°C) * Direct fired natural gas air heater * Drying air flow: ~44,000 kg/h --- # Dryer Dimensions Fluidized bed area: 8.4 m² Dryer size: 7.3 m x 1.15 m --- # Energy Consumption Installed electrical power: ~218 kW Electrical consumption: ~160 kW Natural gas consumption: max. 190 Nm³/h --- # Scope of Supply (Complete Plant) The system includes the following equipment: Drying Unit * Shaking Fluid Bed Dryer / Cooler * Air supply system * Direct fired natural gas air heater * Recirculation fan * Combustion air fan * Cooling air fan --- Dust Separation and Filtration 2 Cyclone separators 1 Baghouse Filter Dust rotary valve Exhaust fan and ducting system 4 Explosion relief panels --- Material Handling System * Twin shaft paddle mixer * Granulator * Screw conveyors * Double screw conveyor * Bucket elevator * Product conveying system --- Automation and Control * MCC / PLC control system * Siemens S7-300 PLC platform * HMI operator panel * Upper control level ready for SCADA integration --- # Typical Applications The system can be used for drying various industrial materials including: * Industrial sludge * Minerals and mining products * Chemical raw materials * Recycling materials * Paper and pulp industry residues * Fertilizer and organic materials * Biomass and other industrial feedstocks --- Condition * Never installed * Never commissioned * Stored since delivery * Complete plant available --- Gjdpfeyrxwwjx Al Sokc Location Turkey The equipment can be inspected on site. Additional technical documentation and photos are available for serious buyers.

Condition: used, functionality: fully functional, Technical specifications (typical for the SK 500s model): Working area: approx. 500 × 500 × 500 mm Design: Tabletop or freestanding, compact Abrasive: Glass beads, corundum, ceramic beads, etc. Blasting principle: Injector principle (suction blasting) Compressed air consumption: approx. 200–400 l/min at 4–7 bar Lighting: Integrated LED or fluorescent lamp Viewing window: Safety glass with replaceable protective film Gjdpfxov Syvqe Al Sskc Filtration: Integrated cartridge filter or external dust collector Abrasive return: Automatic, via cyclone separator Special features: Ergonomic glove ports Footswitch operation for safe working Compact design – ideal for workshops and laboratories Quiet operation thanks to sound insulation Easy to maintain and durable

Condition: good (used), 1-shaft granulator shredder - brand LANCELIN L600 - 22 kw - shredding chamber 650 x 700 - throughput up to 1 ton/hour - 5 mobile knives/2 fixed blades mounted in bevels (scissor effect) - solid rotor - 12mm grid (other diameters possible) - 1 set of knives in reserve - loading possibility - delivered with its belt or/and vacuum cleaner and outlet cyclone and a deferrer (permanent magnet) . very reliable, very solid, no brittleness, ... very versatile and powerful, can shred cables for copper, purges, plaster, BA13, D3E, plastics, wood, bumpers, bottles, metals, etc. possibility of pre-shredding to 50mm with a pre-shredder or rotary shredder. Also for sale. price for lot . Gsdpfevitnuex Al Sskc

Condition: new, functionality: fully functional, machine/vehicle number: MC30-4, Year of construction: 2026, load capacity: 3,000 kg, lifting height: 4,700 mm, free lift: 1,685 mm, fuel type: diesel, mast type: triplex, construction height: 2,438 mm, power: 37 kW (50.31 HP), fork carriage width: 1,260 mm, fork length: 1,200 mm, empty load weight: 4,500 kg, total length: 3,085 mm, drive type: Diesel, construction width: 1,450 mm, Rough terrain forklift Chassis number: MC30-4 Fork width: 100 mm Fork thickness: 45 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: New Technical condition: New Front tire type: Solid rubber Front tire size: SOLIDEAL 125801812 SL R4 GELANDEPROFIL GESA Front tire condition: New Rear tire type: Solid rubber Rear tire size: SOLIDEAL XTRA 27X1012 SKS GELANDEPROFIL GESA Rear tire condition: New Description: 12 months manufacturer’s warranty / Max. 2000 operating hours Full cabin, full free lift, CE certificate, rotating beacon, LED, Gkodpfx Alozlvhre Soc Mast tilt holding valve, load cushioning, 3rd function hydraulic kit, fixed connection for the 3rd hydraulic circuit, air-suspended plastic seat GRAMMER MSG95, road lighting, halogen front and rear, cyclone pre-filter, raised vertical exhaust on counterweight, lockable diesel tank lid, reversing warning signal, front fender extension (metal), front fender extension.

Condition: new, Year of construction: 2024, The subject of sale is a single-shaft shredder equipped with a hydraulic pusher. Brand/Manufacturer: 3E Machinery Model: WT3080 Main motor power: 30 kW Hydraulic system motor power: 2.2 kW Working rotor length: 800 mm Rotor diameter: 300 mm Number of movable knives on the rotor: 46 pcs Dimensions of the movable knife: 40x40x25 mm, fastened with an M12 screw Single row of fixed knives, two-piece Hydraulic system equipped with an oil cooling system External bearing The machine is available at our warehouse in Częstochowa. Our offer includes not only individual shredding devices; upon request, we can provide a quote for a complete crushing line (conveyor feeding to the crusher, crusher, conveyor receiving with possible metal separation, grinding mill, big-bag station with a transport fan and a two-fraction cyclone). Also available in our offer: Knife mills Gedpfx Ajq Sp Hpol Sjkc Two-shaft crushers Four-shaft crushers Washing lines Systems for cable waste Used machines

Condition: new, Year of construction: 2024, The subject of sale is a single-shaft shredder equipped with a hydraulic pusher. Brand/Manufacturer: 3E Machinery Model: WT3080 Main motor power: 30 kW Hydraulic system motor power: 2.2 kW Working rotor length: 800 mm Rotor diameter: 300 mm Number of movable knives on the rotor: 46 pcs Dimensions of the movable knife: 40x40x25 mm, fastened with an M12 screw Single row of fixed knives, two-piece Gkodeq Sp Hzopfx Al Soc Hydraulic system equipped with an oil cooling system External bearing The machine is available at our warehouse in Częstochowa. Our offer includes not only individual shredding devices; upon request, we can provide a quote for a complete crushing line (conveyor feeding to the crusher, crusher, conveyor receiving with possible metal separation, grinding mill, big-bag station with a transport fan and a two-fraction cyclone). Also available in our offer: Knife mills Two-shaft crushers Four-shaft crushers Washing lines Systems for cable waste Used machines

Condition: new, fuel type: diesel, tire condition: 100 %, axle configuration: 8x4, fuel: diesel, emission class: euro6, Year of construction: 2026, Equipment: ABS, AdBlue, Android Auto, Apple CarPlay, Bluetooth, EBS, USB port, additional headlights, airbag, blind spot assist, central locking, compressor, cooling unit, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, hill-start assist, lane keeping assist, navigation system, non-smoking vehicle, onboard computer, power assisted steering, power mirror, retarder, soot filter, spoiler, start-stop system, tachograph, tail-lift, tire pressure monitoring, traction control, New vehicle, unregistered, IMMEDIATE DELIVERY, equipped with 20 m³ CO.MEC rear tipper, short cab, 8x4 chassis Configuration details below: • Worksite vehicle • Universal tipping body preparation – Plug&Play gearbox PTO with HW connection • External sun visor • Flexible cab step • Two LED work lights on rear cab wall • Two emergency beacons • No front visibility mirror • DAF Corner View system • Bumper colour: Crystal White • Door panels in soft fabric • Driver seat: Luxury Air • Driver seat with armrest • Speed limiter set at 80 km/h • Antennas: radio, 2x mobile phone, GNSS. Extra: CB radio • Main battery disconnect switch on chassis • Front axle: 2 x 9.00 t, parabolic, 187N • First front axle, 9000 kg, pneumatic load index 160 • Second front axle: 187N • Front axles: 13R22.5 tyres • Rear drive axles: 13R22.5 tyres • Spare wheel: 13R22.5 • F1, 13R22.5 GO OMTS 156/150 K Steering CBA • R1, 13R22.5 GO ODHD 156/150 K Traction DBB • SP, 13R22.5 GO OMTS 156/150 K Steering CBA • MX-13 engine, 390 kW/530 hp • Eco Performance • Urge-to-move function • Off-road applications with Rock-free function • Axle ratio 3.76 • MX engine brake and integrated ZF retarder Gsdoyi A A Sopfx Al Sjkc • Electro-pneumatic parking brake control • Wheelbase 5.05 m / rear overhang 1.50 m • Chassis rail 310/8.5 mm, full-length reinforcement • Fuel tank: 330 L, aluminium, LH side, height 620 mm • Rear work light pre-wiring • Rear LED lights • Cross member D200-Dc130-V75 • Wired bodybuilder signals and warnings • Plug & Play application connector • Prep for air controls for tipper body • Flexible application connector • First gearbox PTO NH/4c-R-27/30 • MTC max 80,000 kg related to towing bar/coupling • Raised cyclone air intake • Dust exclusion shield • Lifting jack - Rounded body in HARDOX 500 abrasion-resistant steel - Floor thickness: 7 mm, sides: 5 mm — 20m³ - Rear tailgate with hydraulic 'gullwing' and tipping opening - Rear tailgate opening via hydraulic catches - Rear chute for unloading into paver - CRAMARO electric tarpaulin kit with 500 mm bows, remote control - Underslung body vibrator with remote control - Half-moon folding flap on rear side - Retractable pneumatic underrun beam at the rear Leasing and/or financing available at the best market rates. Option for official DAF maintenance contract and extended warranty. Private negotiation, wide availability of chassis units, 3-axle 6x2 and 4-axle 8x4, immediately available in various colours, setups, and engine types. Description may contain inaccuracies and is subject to verification on site. This sheet is not contractually binding. For more information, please call the numbers listed, also available via WhatsApp Direct. Mr. Paolo Antonio Gorgoni Photo report conducted at our premises—photos are real and show the current vehicle condition. Please note the system automatically inserts features and options, so discrepancies may be present. For maximum accuracy, always verify specifications directly with us.

Condition: new, filter area: 11 m², energy consumption: 18 kWh, sheet thickness steel (max.): 2 mm, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! ✈️ 5-week delivery ✈️ Delivery on request possible. ✅✅✅ Energy efficiency class A+++ ✅✅✅ A frequency converter for speed control is integrated. MA-JP12 - 18 KW/H LIST PRICE €22,500 Offer price ►► €15,172 * Gross price. Your net price for commercial customers: €12,750.00 MA-JP12 - V2 - 30 KW/H LIST PRICE €25,500 Offer price ►► €17,500 * Gross price. Your net price for commercial customers: €15,750.00 MA-JP16 - 30 KW/H - LIST PRICE €30,500 Offer price ►► €24,097 * Gross price. Your net price for commercial customers: €20,250.00 ➖➖➖➖➖ ►► Buy Now ◄◄ ✳️ Retain your liquidity! We offer a variety of financing options to ensure your investment has the greatest chance of success. Contact us today to learn more about our lease-purchase, warranty, or leasing programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time❗ ⌛⏰◄◄◄ ✨✨ Buy directly from the manufacturer and benefit from price and quality advantages! ✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ✅ Versatile: The PROTON dust filter systems have been developed for a wide range of applications and are used in numerous industries. Especially in enclosed spaces and dusty working environments, they ensure a clean atmosphere and improved visibility of the workpiece surfaces – a crucial factor for the quality of the surface coating. ✅ Environmentally friendly & efficient: The environmentally friendly filter systems reliably capture dust particles and return cleaned air to the environment. Our jet-pulse filters are among the most widely used systems for the extraction of dry particles and for process air filtration. ✅ Maximum efficiency with low maintenance: The jet-pulse system is designed for maximum performance while minimizing maintenance time and operating costs. It is used in dust extraction systems, pneumatic conveying systems and for the removal of health-endangering substances from the air. ✅ Modularly expandable & recyclable: For even higher separation performance, the jet-pulse filter can be combined with bag filters or cartridge filters as well as a mono-cyclone. In systems with recovery systems – e.g. for the recycling of powder coatings – mono- or multi-cyclones can be used. ✅ Flexible design: The systems consist of integrated modules and can be adapted in size, material and filter type. Depending on the type of dust and the application, a choice can be made between cartridge or bag filters. ✅ Powerful & sustainable: PROTON dust filter systems impress with their high filtration performance and contribute significantly to improving the quality of work as well as protecting the environment and employees. ⭐Note on prices:⭐ The stated prices do not include a mono-cyclone and apply exclusively to the jet-pulse filter unit. The control cabinet is also not included in the scope of supply. Gsdpsggyhiofx Al Sjkc For prices on additional components such as a control cabinet or mono-cyclone, please contact our sales department. ⭐Follow us for new campaigns⭐ ☀️ 2 YEAR WARRANTY ☀️

Condition: new, Year of construction: 2026, The item for sale is a single-shaft shredder equipped with a hydraulic pusher. Brand/Manufacturer: 3E Machinery Model: WT440120 Main motor power: 75 kW Hydraulic system motor power: 5.5 kW Working rotor length: 1200 mm Rotor diameter: 400 mm Number of knives: 70 pcs Dimensions of the movable knife: 40x40x25 mm, fastened with an M12 screw Single row of fixed knives, two-piece, with the option of mounting a second row of fixed knives (upper) depending on the type of waste being processed Top-loading section widened to facilitate feeding waste into the shredder Hydraulic system equipped with an oil cooling system External bearing Inspection flap opened with the screen, assisted by two actuators The machine is available at our warehouse in Częstochowa. Our offer includes not only individual shredding devices; upon request, we can provide a quote for a complete crushing line (conveyor feeding to the crusher, crusher, receiving conveyor with possible metal separation, grinding mill, big-bag station with a transport fan and a two-fraction cyclone). Also available in our offer: Gkedpfxsq Sp Has Al Sec Knife mills Two-shaft crushers Four-shaft crushers Washing lines Systems for cable waste Used machines

Condition: new, Year of construction: 2026, The item for sale is a single-shaft shredder equipped with a hydraulic pusher. Brand/Manufacturer: 3E Machinery Model: WT40150 Main motor power: 90 kW Hydraulic system motor power: 5.5 kW Working rotor length: 1500 mm Rotor diameter: 400 mm Number of movable knives on the rotor: 94 pieces Dimensions of the movable knife: 40x40x25 mm, fastened with an M12 screw Single row of fixed knives, two-piece, with the option of mounting a second row of fixed knives (upper) depending on the waste being processed Top-loading section widened to facilitate feeding waste into the shredder Hydraulic system equipped with an oil cooling system External bearing Inspection flap opened with the screen, assisted by two actuators The machine is available at our warehouse in Częstochowa. Our offer includes not only individual shredding devices; upon request, we can provide a quote for a complete crushing line (conveyor feeding to the crusher, crusher, conveyor receiving with possible metal separation, grinding mill, big-bag station with a transport fan and a two-fraction cyclone). Also available in our offer: Godpfxszlh Dfo Al Sokc Knife mills Two-shaft crushers Four-shaft crushers Washing lines Systems for cable waste Used machines

Condition: new, Year of construction: 2024, functionality: fully functional, operating hours: 12 h, input voltage: 380 V, input current: 200 A, type of input current: three-phase, Equipment: CE marking, 1. Material feeding table with moving chain mechanism. Adjustable height min 0.8, max 1.4 and electric drive. 3kw L 4m 2. Large roller shredder with double blades, diameter 1.8m, depth 1.9m 380V 30kw 3. Connection point with a lock for feeding bulk materials to the crushing mill. 4. Hammer mill turbine 380v 35kw 5. Mixer for crushed raw materials, with adjustable feed hatch. Volume 4.8m3 380V 2.2kw 6. Large horizontal granulator with automatic lubrication system and programmable rotor automatic lubrication. Additional cooling of the granulator rings and fine dust extraction. MAX capacity 3T/H 380 90kw 7. Small moving conveyor belt Width 38cm, Length 2m 380v 0.5kw 8. Large transport belt with head valve Width 38cm Length 6m 380v 1.5kw 9. Pellet cooler with cyclone for fine dust collection and head valve MAX capacity 3.5T/H 380V 3kw 10. Screener/vibrating table with screenings collector and screw feeder. 380V 1.5KW Gkodpow Ulp Eefx Al Soc 11. Long screener cylinder with screening mesh Length 3m 380V 1,5kw 12. Conveyor belt with feed to packaging. Length 4.2m 380V 0.75kw 13. BIG BAG packaging unit with calibrated scales, tolerance +/- 5gr per 1T 14. Screw conveyor for feeding material to the automatic packaging machine in bags. Length 5m diameter 27.5cm 380V 3kw 15 Automatic packaging machine with bag sewing and PVC bag sealing. There is also an automatic labeling conveyor table. Max capacity 4.2T/H with air compressor. 16. New semi Electric 3T pallet trolley

Year of construction: 2020, condition: new, Automation Gksdoflq Spopfx Al Sjc Use of one photocell Using one photocell in the space of workpiece allows you to measure the length of the workpiece and, consequently, gives you the opportunity to turn on the guns when the item is in range, and to switch off the gun immediately after the workpiece is finished. The photocell is included in the standard equipme Array of guns Vertical 8pcs. pistols Control - profiControl 10 " Cyclone - CK-D1250 Dust collector - OZ-8H Center - RP-01 + SV-200 MA1-23 x 2 pcs manipulator Os X MX-100 x2 pcs. Horizontal goal - Horizontal goal W400 x2 items Vertical gate - H2000 vertical gate The maximum painting speed is 1,65714285714286m / min 0 piece pulling machines Pow. requires 10188m3 / h to fly Required min. cabin passage W900mm H2100mm Pipe diameter 500mm - 16.9m / s minimum 16m / s Air consumption 1210 L / min + Sug. SC-20 compressor Min.current connection 28.14 kW Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus braking the energy and powder coating. Vertical detection of the detail of the workpiece. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time at which the detail should appear in the gun space - allowing guns to be selectively switched on or off. Application of light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to manipulate the manipulators. Benefits of using gates and photocells The benefits of using photocells or light gates are primarily energy and powder savings. Eliminate painting of a zone in which there is no detail. With the use of light gates, precise control of the guns. Our lines can be optionally equipped with photocells, or light gates Using one photocell in the workpiece space allows you to measure the length of the workpiece and, consequently, gives you the ability to turn on guns when the item appears in their range, and turn off the gun immediately after the workpiece is finished. Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus saving the energy and powder. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time in which the detail will appear in the gun space - allowing guns to be selectively switched on or off. Using of light gates with multiple sensors horizontally and vertically This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to adjusting the manipulators. The benefits of using photocells or light gates are primarily powder and energy savings Eliminate painting of a zone in which there is no detail With the use of light gates, precise control of the guns.

Condition: new, Year of construction: 2026, KDP350 Cabinet Sandblasting Machine The KDP350 cabinet sandblasting machine is an efficient device designed for cleaning and surface treatment of metal components. It is dedicated to professional workshops, industrial plants, and refurbishment service centers. The 330-liter working chamber and two side doors with perimeter sealing provide convenient access to the working area and ensure dust-free operation. The machine is supplied with a DC15 cyclone dust extraction system, which effectively removes dust generated during the blasting process. The KDP350 is an ideal solution as a wheel sandblaster and for cleaning metal components requiring precise abrasive treatment. Main Advantages of the KDP350 Sandblaster Large working chamber – 330 liters of capacity allows processing larger components. Two side doors – located on the left and right side, making loading and handling of workpieces easier. Dust-free operation – thanks to sealing gaskets and dust extraction ports with diameters of Ø63 mm and Ø90 mm. Sandblasting gun with ceramic nozzles – 4 interchangeable tips (4, 5, 6, and 7 mm) provide precise blasting performance. Working area lighting – improves visibility and accuracy during operation. Protective gloves integrated into the cabinet – wear-resistant gloves protect the operator’s hands. Compatibility with various abrasives – including quartz sand, glass beads, silicon abrasive, emery, and plastic granulate. Precision, Efficiency, and Versatile Applications The KDP350 cabinet sandblaster is suitable for removing rust, paint, scale, and technological deposits from metal, steel, and aluminium surfaces. It is an excellent solution for sandblasting: aluminium and steel wheels, engine blocks, hinges, machine housings, and other components requiring precise abrasive surface treatment. Adjustable operating parameters, including pressure from 4–8 bar and air consumption of 400–700 l/min, allow the machine to be adapted to different materials and abrasive types. Dust Extraction System – DC15 Cyclone Extractor The KDP350 is supplied with a high-performance DC15 cyclone dust extraction system, which efficiently separates dust and fine particles generated during surface treatment. The integrated filter and flexible connecting hose provide comfortable and safe operation, maintaining cleanliness inside the cabinet and in the surrounding workspace. Thanks to cyclone filtration technology, filter service life is extended and the need for frequent replacement is reduced. Standard Equipment DC15 cyclone dust extractor with filter and hose 12 V fluorescent lamp (230 V power supply with switch) 2 integrated rubber protective gloves Sandblasting gun with 4 ceramic nozzles (sizes: 4, 5, 6, 7 mm) 4 protective films for the viewing window 2 dust extraction ports: Ø63 mm and Ø90 mm 2 side doors with perimeter sealing gaskets User manual in Polish Technical Specifications – KDP350 Sandblasting Cabinet Parameter Specification Gjdpfsw H N R Sex Al Sekc Working volume 330 L (0.33 m³) Operating pressure 4–8 bar Air consumption 400–700 l/min Air connection 1/4" quick coupling Viewing window area 580 × 270 mm Doors 2 pcs. (left and right side) Dust extraction connection Ø63 mm and Ø90 mm Internal dimensions 890 × 655 × 360/610 mm External dimensions 960 × 720 × 1500 mm Weight 88 kg Note: The machine is supplied in parts and requires self-assembly according to the included instructions.

Condition: new, Big-bag emptying station with cyclone separator Gsdpfx Alezpw U Us Sokc For sale is a big-bag emptying station with an integrated cyclone separator, ideal for the low-dust handling and discharge of various bulk materials such as plastic granules, ground materials, powders, or recycled materials. The system is in fully functional condition and is available immediately. An inspection can be arranged at any time at our warehouse in Wuppertal.

Condition: new, Year of construction: 2026, CORMAK FAN 11 High-Pressure Material Handling Fan – Premium Industrial Blower for Dust and Sawdust Extraction The CORMAK FAN 11 is a premium industrial high-pressure material handling fan designed for demanding dust extraction and pneumatic conveying applications. Delivering an airflow of up to 15,445 m³/h and powered by an 11 kW three-phase motor, it efficiently removes sawdust, wood chips, dust, and other dry particles generated during the processing of wood, metal, plastics, and composite materials. Its robust construction and high static pressure make it an ideal solution for large-scale industrial dust collection systems. Key Advantages High airflow capacity up to 15,445 m³/h for efficient extraction from multiple machines Powerful 11 kW motor for reliable continuous industrial operation Heavy-duty steel housing resistant to mechanical damage and corrosion Versatile application for sawdust, wood chips, dust, and other dry bulk materials Energy-efficient and low-noise operation optimized for long production cycles Flexible installation options for integration into customized extraction systems Construction and Technology The CORMAK FAN 11 utilizes a high-efficiency centrifugal impeller engineered to generate substantial airflow while maintaining high static pressure. The dynamically balanced impeller provides smooth operation with minimal vibration, while the welded heavy-gauge steel housing ensures excellent durability in demanding industrial environments. Designed for continuous-duty operation, the fan offers long service life with minimal maintenance requirements. Performance and Efficiency A precision-balanced impeller, industrial-grade electric motor, and optimized cooling system enable the FAN 11 to maintain outstanding performance during prolonged operation without overheating. Its high airflow and strong suction pressure make it ideal for extracting sawdust, wood chips, and fine dust from large woodworking machines, centralized collection systems, silos, and automated production lines. Applications The CORMAK FAN 11 is ideal for: Woodworking shops and furniture manufacturing plants Metalworking, plastics, and chemical processing industries Agricultural storage facilities and grain drying installations Automated production lines with centralized dust extraction Pneumatic conveying systems for dry industrial materials Standard Equipment Gkedpfxevugfws Al Sec Complete centrifugal fan assembly with 11 kW motor Heavy-duty steel housing with inlet and outlet flanges Industrial centrifugal impeller designed for continuous operation Optional Equipment Inlet and outlet diameter reducers Installation and mounting kits Cyclone separators and filtration systems Technical Specifications Parameter Value Maximum Airflow 15,445 m³/h Inlet Diameter 350 mm Outlet Diameter 350 mm Static Pressure 3187–2019 Pa Motor Power 11 kW Power Supply 400 V Dimensions (L × W × H) 920 × 1050 × 1060 mm Weight 170 kg

Condition: new, Year of construction: 2026, functionality: fully functional, The system is a fully integrated, automated industrial powder coating line engineered for high-throughput production, process stability, and superior surface finishing quality. It combines a multi-stage chemical pretreatment washer, a high-efficiency electrostatic powder coating booth, a controlled thermal curing oven, and an overhead rail conveyor system designed for continuous or indexed part transportation. The chemical pretreatment washer is designed as a multi-stage surface preparation unit, including degreasing, rinsing, phosphating, and passivation phases. It is constructed from high-grade stainless steel (AISI 304/316) to ensure long-term chemical resistance and structural durability. High-pressure centrifugal pumps along with optimized spray nozzle arrays guarantee full and uniform coverage of complex geometries. The system incorporates closed-loop chemical recirculation, advanced filtration units, and automatic monitoring of pH, conductivity, and bath temperature, ensuring consistent surface activation while minimizing chemical consumption and operational waste. Gkodpfey Htg Dox Al Soc The electrostatic powder coating booth is designed for maximum transfer efficiency and minimal material loss. It features a high-performance powder recovery system (cyclone or cartridge filtration type), achieving recovery rates above 95%, which significantly reduces operating costs. The booth is constructed with anti-static architecture to prevent powder build-up and to ensure stable electrostatic field distribution. It is fully compatible with both manual and automatic spray gun systems, enabling flexible integration depending on production requirements. The curing oven is a high-performance thermal system designed to provide uniform heat distribution across the entire chamber, with temperature deviation controlled within ±2°C. It operates with forced convection airflow using high-efficiency industrial fans, ensuring homogeneous curing conditions for all coated parts. The heating system can be configured with gas, diesel, or electric resistance elements, depending on the available energy infrastructure. High-density insulated panels minimize thermal losses, while PLC-based control allows precise management of curing profiles and process repeatability, ensuring optimal polymer cross-linking and defect-free surface finishes. The overhead conveyor system provides continuous or step-by-step transport of parts throughout all process stages. It is constructed with heavy-duty chains and high-temperature resistant components suitable for demanding industrial environments. The system includes variable speed control to optimize dwell times in each process zone, enhancing throughput efficiency and process synchronization. Its ergonomic design minimizes manual handling while maximizing production flow stability. From an engineering standpoint, the complete line is designed for maximum operational efficiency, reduced lifecycle cost, and high process reliability. Energy-optimized thermal systems, chemical recovery circuits, and high transfer efficiency coating technology significantly lower total operating expenses while maintaining consistent coating quality. The modular architecture allows for future expansion and customization, making the system suitable for scalable industrial applications.

Year of construction: 2024, condition: new, functionality: fully functional, Rental Multiprocess System in stainless steel. Stand-alone lab scale grinding and classifying plant. This compact plug-and-play system is perfect for Research and Development (R&D) and small-scale productions. It operates in small batches of a few kilos. The system can be fitted with different modules (one at a time) to either grind or classify different products, both coarse and super fine grinding are possible, providing a wide variety of end results. The exchange of the different modules is fast and easy, allowing to perform different tasks in a short time. *Jet mills are subject to export license depending on destination country ALPINE multi-process plant AFG 100 (MPS) The basis of this concept is the use of a basic module which combines all the additional components of a grinding/classifying plant (frame, dosing system, fittings, separator filter, control system etc.). In just a few simple steps, appropriate modules can be integrated to implement various grinding and classifying processes in this one machine: • ALPINE Fluidized Bed Opposed Jet Mill AFG 100 • ALPINE Turboplex Fine Classifier ATP 50 • Alpine Zirkoplex Classifier Mill ZPS 50 Characteristics: • Multi-process plant offers maximum flexibility • Small-scale production on a qualified, GMP-compliant plant • Use of scale-up capable process technology • Short change-over and assembly times as well as easy cleaning due to optimized disassembly. • Compact plant design on a laboratory scale • Ready-to-use system on delivery Design: Design: Non Pressure Shock Resistant (NPSR), suitable for inert operation (N2) ATEX - inside non ATEX - outside non ATEX Material of construction - product contacting parts: stainless steel - non product contacting parts: stainless steel Wear protection: none Batch operation, for a few kilos normally (product dependent) Scope: Hosokawa Alpine Multiprocess System in stainless steel. Complete system with feeding screw, grinding or classifying module, cyclone, filter, blower, control cabinet, motors Can be fitted with the following modules: 100 AFG, 50 ATP and 50 ZPS. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Godpeugfn Aofx Al Sekc Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Condition: new, Year of construction: 2026, KDP350TOP Cabinet Sandblasting Machine The KDP350TOP cabinet sandblasting machine is an advanced industrial device designed for cleaning and preparing metal surfaces. Thanks to its spacious 350-liter working chamber and top-opening design, this model provides excellent operating comfort and allows sandblasting of large components. The integrated DC15 cyclone dust extraction system ensures a clean and dust-free working environment. This reliable sandblasting cabinet is ideal for processing aluminium and steel wheels, machine components, engine parts, and various steel or aluminium elements. Main Advantages of the KDP350TOP Sandblaster Large working chamber – 350 liters of capacity for processing large workpieces. Top opening chamber design – simplifies loading and unloading of components. DC15 cyclone dust extraction system – effectively removes dust generated during operation. Dust-free operation – front doors with perimeter seals and extraction connections (Ø63 and Ø90 mm) ensure a clean working environment. Sandblasting gun – equipped with 8 ceramic nozzles for precise surface treatment. Internal lighting – 12 V fluorescent lamp powered by 230 V improves visibility during operation. Integrated protective gloves – wear-resistant gloves built into the cabinet provide safety and ergonomic operation. Replaceable protective films for the viewing window – ensure clear and uninterrupted visibility. High compatibility with abrasives – suitable for quartz sand, glass beads, emery, and plastic abrasives. Applications The KDP350TOP cabinet sandblaster is suitable wherever precise surface treatment is required. It is ideal as: Gksdpfx Asm Ncb Eol Soc a sandblaster for aluminium and steel wheels up to 20 inches, a preparation cabinet before painting or welding processes, a device for removing rust, paint, coatings, and technological deposits, a tool for refurbishing automotive, engine, and industrial components. Dust Extraction System – DC15 Cyclone Extractor The set includes the DC15 cyclone dust extraction system, which works together with the extraction ports to effectively remove contaminants generated during sandblasting. Thanks to the cyclone filtration system, the filter maintains high efficiency for a long time, while the working area remains clean. This solution significantly improves operator comfort and safety, especially during long-term operation of the cabinet. Standard Equipment DC15 cyclone dust extractor with filter Connecting hose 12 V fluorescent lamp (230 V power supply) with switch 2 rubber gloves integrated into the cabinet Sandblasting gun with 8 ceramic nozzles 4 protective films for the viewing window Front door with rubber perimeter seals 2 dust extraction ports (Ø63 mm and Ø90 mm) User manual in Polish Technical Specifications – KDP350TOP Sandblasting Cabinet Parameter Specification Working volume 330 L (0.33 m³) Operating pressure 4–8 bar Air consumption 400–700 l/min Air connection 1/4" quick coupling Viewing window area 580 × 270 mm Dust extraction connection Ø63 mm and Ø90 mm Internal dimensions (W × D × H) 890 × 655 × 360/610 mm External dimensions 960 × 720 × 1500 mm Weight 88 kg

Condition: new, Year of construction: 2025, Shot blasting chamber, 7 x 4.5 m, with extraction floor for mineral blasting media (glass, ceramic, corundum, garnet sand, etc.). Magnetic separator, cyclone, media processing, material hopper, blasting media refilling system, free-jet compressed air blower, filter system with cleaning function. Walls lined with 4 mm fabric rubber. Roof hatch for crane loading. Gksdpfx Asd Naafel Ssc For questions regarding technical specifications, etc., please contact us in writing or by telephone. The machines are based on production at the Grossenlueder site, which has been ongoing since 1971. Harth & Seifert - Georg Fischer - Schiffmann and Seidl - Oliver Fritz GmbH & Co. KG, with their long-standing and well-known contact persons.

Condition: new, Year of construction: 2026, FAN 7.5 Material Handling Fan – High-Capacity Industrial Dust and Chip Extraction by CORMAK The CORMAK FAN 7.5 is a high-performance industrial material handling fan designed for efficient extraction and pneumatic transport of wood chips, sawdust, dust, and other dry bulk materials. Equipped with a powerful 7.5 kW motor and delivering an airflow of up to 10,562 m³/h, it is an ideal solution for large woodworking shops, furniture manufacturers, agricultural facilities, and industrial production plants requiring reliable dust extraction. Key Advantages Airflow up to 10,562 m³/h – suitable for servicing multiple woodworking machines simultaneously High-pressure centrifugal impeller – generates suction pressure up to 2554 Pa Powerful 7.5 kW motor – designed for continuous industrial operation Versatile application – transports sawdust, wood chips, dust, and other dry particulate materials Heavy-duty steel construction – built for demanding industrial environments Construction and Technology The FAN 7.5 centrifugal fan features a robust steel housing designed for long-term industrial use. The dynamically balanced steel impeller ensures smooth operation with minimal vibration, even under continuous load. Its stationary design allows seamless integration into custom dust extraction and pneumatic conveying systems, making it suitable for a wide variety of industrial installations. Performance and Efficiency The CORMAK FAN 7.5 maintains strong and consistent airflow, ensuring efficient removal of sawdust, chips, and airborne dust without clogging extraction ducts. Its high static pressure enables reliable transport of heavier wood waste particles, improving workplace cleanliness, protecting machinery, and enhancing overall production efficiency. Applications The FAN 7.5 is suitable for: Woodworking shops and furniture manufacturing plants CNC machining centers, panel saws, spindle moulders, and planers Agricultural facilities handling grain, feed, and biomass dust Metalworking and industrial production plants requiring dry material extraction Centralized dust collection and pneumatic conveying systems Standard Equipment 7.5 kW / 400 V three-phase electric motor Heavy-duty steel centrifugal impeller 340 mm inlet connection 350 mm outlet connection Gjdpfxsvugrds Al Sekc Industrial steel housing for stationary installation Optional Equipment Flexible extraction hoses and quick-connect fittings Cyclone separators Final-stage filtration systems Automatic machine start/stop control modules Technical Specifications Parameter Value Maximum Airflow 10,562 m³/h Inlet Diameter 340 mm Outlet Diameter 350 mm Static Pressure 2554–1673 Pa Motor Power 7.5 kW Power Supply 400 V Dimensions (L × W × H) 810 × 900 × 980 mm Weight 125 kg

Condition: ready for operation (used), functionality: fully functional, suction capacity: 20,000 m³/h, production capacity: 1,300 unit/h, No minimum price – guaranteed sale to the highest bidder! The hammer mill (year of manufacture 2021) has only approximately 2 operating hours! Godpfxjzgf A Ue Al Sjkc The system is suitable for straw, hay, alfalfa, compost, wood, and other agricultural raw materials! TECHNICAL DETAILS Capacity (material-dependent) max.: 1,300 kg/h MACHINE DETAILS Hammer mill power: 75 kW Pellet press: 75 kW, without control unit Bale shredder: 35 kW, including control unit Dust filter capacity: 20,000 m³/h, including control unit Operating hours Entire line: approx. 1,500 h Hammer mill: approx. 2 h EQUIPMENT Pellet press Conveyor belt Elevator Pellet cooler with screen Buffer tank with discharge 2 cyclones with rotary valve airlock Fan for cooler extraction New die Various used spare parts 10 m feed table for the bale shredder Bale shredder, including control unit Hammer mill, including control unit Centrifugal separator Big bag station for dust filter Dust separation technology: EU-ATEX Directive 2014/34 Positive dust explosion assessment from 2023 Note: The line has already been dismantled and is ready for loading.

Year of construction: 2024, condition: new, Overview - of the different variants *Not every item is required: Optional: - Bale breaker MHB from €24,990 net - Straw mill MHZ from €7,980 net - Special hopper €970 net - Cyclone from €3,750 net - Sheet metal silo demonstrator with discharge system (only shown schematically in the picture) *optional, if you want to feed it with a wheel loader Individual price net from €14,750 - demonstrator - Dust extraction screw - length approx. 4 m 4 sieves are mounted on the underside, which are used for suction. Individual price net from: €9,750 - Suction parts / hoses, lump sum €945 net - Control system for the entire system Individual price net: €2,750 - Demonstrator suction unit MMJET 160, with cleaning Connection 160, Fan 2.2 kW Air flow 1850 m³ / 400 V Automatic compressed air cleaning Individual price net from: €6,950 - Bale press B 400 Bales approx. 400x400x800 (height adjustable) Up to 30 bales per hour with approx. 20 kg from €59,995 net *A reference system (baler) is located in postal code: 64579 Gernsheim Technical data: Bale size (W x D x H): 400 x 400 x 800 (height can be adjusted on request) Weight of the bale +/- 20 KG (material-dependent) Capacity: approx. 30 bales per hour Hopper capacity approx. 0.7 m³ Level sensors for min./max. level in the hopper Hydraulic pre-compressor Hydraulic press ram Hydraulic unit, valve block with oil tank Gkjdpfx Aleff Sbio Soc Pump 18.5 kW / 50 liters Rollers in the press channel for easy bale discharge Dimensions (L x W x H) 3105x2830x2455 mm Weight approx. 1500 KG mütek bale presses / packaging machines have been developed for the production of bales from a wide variety of materials, such as shredded miscanthus or elephant grass, wood chips, sawdust and shredded straw. The machine is characterized by a robust design, which guarantees consistent quality in continuous operation. The bale press compresses the material fed into the hopper without the addition of binders by means of hydraulic pressure and packages the material in plastic bags. The volume of the material can be significantly reduced with the bale press. The volume reduction rate depends on the material. The maximum material moisture content must not exceed 18% dry weight. The hopper of the mütek bale press can be filled automatically or manually and has a volume of approx. 0.7 m³. Hoppers with larger volumes or with an integrated suction and filter system as a complete disposal unit are also available. In addition to automatic filling via a dust extraction system, mütek also offers filling by means of screw conveyors. In both variants, automatic dust extraction is possible. mütek bale presses are equipped with a control cabinet. In the standard version, the dimensions of the bales (width x depth x height) are 400 x 400 x 800 mm. However, the height can be adjusted to your requirements on request. The following advantages result from the production of bales: - simple and safe storage - no loose dust - Minimization of the storage volume - Low transport volume *Requirements for the raw material: - dry (max. 30% dry weight) - maximum 35 mm long

Condition: new, Year of construction: 2026, CORMAK FAN5500 Material Handling Fan – High-Capacity Industrial Blower for Sawdust and Dust Extraction The CORMAK FAN5500 is a high-performance centrifugal material handling fan engineered for intensive industrial extraction of sawdust, wood chips, dust, and other dry particulate materials. Powered by a 5.5 kW three-phase motor and equipped with a high-efficiency centrifugal impeller, the FAN5500 delivers an impressive airflow of up to 8,000 m³/h, making it an ideal solution for woodworking factories, furniture production facilities, and centralized dust collection systems. Key Advantages Airflow up to 8,000 m³/h – ideal for multi-machine installations and production lines Powerful 5.5 kW motor – ensures reliable performance under continuous heavy-duty operation Large connection ports – Ø300 mm inlet and Ø250 mm outlet for compatibility with various extraction systems Compact yet robust construction – excellent vibration resistance and long service life 400 V three-phase power supply – designed for industrial installations Construction and Technology The FAN5500 features a high-efficiency centrifugal impeller driven directly by a powerful electric motor, minimizing power losses while maximizing airflow. Its heavy-gauge steel housing is powder-coated for superior resistance to corrosion, abrasion, and mechanical damage. The aerodynamic design optimizes air movement while reducing energy consumption. Despite its high performance, the compact footprint allows easy installation where space is limited. Performance and Efficiency The CORMAK FAN5500 efficiently extracts large volumes of sawdust and airborne particles from multiple workstations simultaneously. Maintaining continuous high airflow helps prevent duct blockages, extends the service life of machinery and filtration systems, and significantly improves workplace cleanliness. Effective dust extraction also enhances operator safety by reducing airborne dust concentration and minimizing fire hazards. Applications The FAN5500 is ideally suited for: Woodworking and furniture manufacturing facilities Workshops processing solid wood, MDF, plywood, and engineered wood products Centralized industrial dust collection systems CNC routers, panel saws, spindle moulders, planers, and sanding machines Pneumatic conveying systems for dry wood waste Standard Equipment 5.5 kW / 400 V three-phase electric motor Heavy-duty steel centrifugal impeller Powder-coated steel housing Ø300 mm inlet connection Ø250 mm outlet connection Heavy-duty support frame Optional Equipment Wear-resistant flexible extraction hoses Cyclone separators Automatic start/stop control systems Extraction arms, adapters, and duct reducers Technical Specifications Parameter Value Maximum Airflow 8,000 m³/h Inlet Diameter 300 mm Outlet Diameter 250 mm Motor Speed 2850 rpm Motor Power 5.5 kW Power Supply 400 V Dimensions (L × W × H) 670 × 600 × 600 mm Weight 55 kg Gkedpfxjvughls Al Sjc

Condition: new, Year of construction: 2022, functionality: fully functional, overall weight: 6,500 kg, total height: 3,700 mm, total length: 2,510 mm, total width: 2,060 mm, We are a company with more than 30 years of experience in the trade of machinery for the plastics industry. We have the offered machines in stock and can carry out tests on them on your material. XC series mills are designed for grinding both soft and hard plastics Stainless steel housing and bearing lubrication system will ensure quiet and stable operation Each model is equipped with an ammeter Versions with cyclones are available Control cabinet on Simens components Before purchase possibility of tests on customer's material. If you have any questions, please contact us at the e-mail address or telephone number provided. P&F Wartacz was founded in 1990 and now we are the oldest trading company in the PTSz industry continuously selling injection molding machines, mills, crushers, coolers, conveyor belts peripheral equipment and spare parts. Rotor diameter (mm): 820 Rotor width (mm): 1050 Power (kW): 75 kw Knives on rotor (pcs): 33 Fixed knives (pcs): 6 Weight (kg): 6500 Possible purchase with extraction and cyclone instead of drawer Unused machine available from stock, possible tests before purchase. Gjdpjrbh U Aofx Al Sokc (dozens of machines in stock)