Used Cyclone Separator for sale (6,404)

Year of construction: 2020, condition: refurbished (used), Dear customers, To ensure a fast and reliable response to your inquiry, we kindly request that you contact us preferably via email. This way, we can directly assign your request to the appropriate contact person, gather all information and documents completely, and process your inquiry as quickly as possible. We look forward to hearing from you and are happy to assist you! For suction diameters from 120 to 700 mm. Please let us know your volumetric flow rate, and we will select the right cyclone for you. Various designs available: Laodpfx Afeftb Ebewef - Legs, made of painted square steel profiles - Cell wheel lock and transition piece with inspection flap - Inlet box with check valve - Tangential outlet with/without pressure relief area - Square outlet with/without pressure relief area - Sound insulation Of course, you can also purchase all accessories from us, such as fans, suction pipes, deflector hood, etc. Mode of operation: The contaminated air is introduced tangentially into the cylindrical upper part, causing the air to rotate. The material is forced outwards towards the circumference of the cyclone under the influence of centrifugal force and is discharged through the hole in the bottom. The cleaned air leaves the cyclone through the centrally located outlet pipe at the top. The separation efficiency increases with the feed rate, but so does the pressure loss and, consequently, the energy consumption. Therefore, it is important to find a good compromise. We have developed a range of cyclones that are optimized for filtering large quantities of material. They are therefore very well suited for the wood/paper/recycling/grain and feed industries. Below, you can select the cyclone with the right size based on the air volume and a typical pressure drop in the range of 1000 Pa. Operating pressure +/- 5000 Pa

Condition: excellent (used), Kongskilde cyclone separator with rotary valve For sale is a Kongskilde cyclone separator, including an installed rotary valve with gear motor and connecting hose. This unit is suitable for separating and discharging chips, granules, dust, or similar materials in dust extraction and conveying systems. The cyclone is mounted on a sturdy frame and stands on a transport pallet. Ljdezrlznopfx Afwjaf Scope of supply as shown in the photos: Kongskilde cyclone separator Rotary valve with drive Frame Connecting pipe and flexible hose Inspection at our warehouse is possible by appointment. If you have any questions or are interested, please do not hesitate to contact us.

Condition: like new (used), Year of construction: 2026, Cyclone separator Cell wheel lock Piping Ledpfxoztzmvj Afweaf Fan

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 102147.10340, overall weight: 4 kg, Kaeser F26KC cyclone separator with ECO-Drain 31 steam trap suitable for up to 2.6 m³/min compressed air. KAESER KC cyclone separators remove condensate from the compressor's compressed air outlet. They are a must for trouble-free and energy-efficient operation of downstream dryers and filters. KC cyclones are supplied with the economical and particularly reliable ECO-DRAIN 31 steam trap as standard – including test button and alarm contact, of course. In addition, they are particularly easy to combine with KAESER filters and can be fixed to the wall with optional wall brackets. This makes installation particularly easy. Specifications: Volume flow 2.6 m³/min Connection compressed air inlet: G 1" min. overpressure: 2 bar Max. overpressure: 16 bar Weight : 4.0 kg Dimensions W x D x H : 241 x 225 x 515 mm Condensate drain: ECO Drain 31 Visit our business premises in Erlangen. Lasdpfx Afjvm Ahlewef On over 450 square meters of exhibition space you will find a large number of used and new compressors.

Condition: new, Year of construction: 2026, Cyclone Dust Separator with Waste Container and Vacuum Hose Included The cyclone dust separator with waste container and vacuum hose is a practical solution designed for efficient dust extraction in woodworking workshops and industrial environments. The separator allows two machines to be connected simultaneously, improving the efficiency and convenience of the dust collection system. The dust separation process is based on centrifugal force. Extracted dust particles are separated from the airflow and collected in containers located beneath the cyclone. The separator efficiency reaches 90–95%, significantly reducing the amount of dust reaching the filtration system. Device description Metal separator housing, Metal waste collection container, Mobile base, Ergonomic handle, Laedsvu Uugopfx Afwsf Viewing window for checking the container fill level, Quick-release clamps for easy bag installation. The cyclone must be connected to a fan or dust extraction system. Operating principle In the cyclone separator, contaminated air enters the cylindrical chamber and begins to rotate. Due to centrifugal force, heavier particles suspended in the airflow are pushed toward the outer walls of the chamber. As they lose speed and kinetic energy through contact with the cyclone walls, they fall downward under the influence of gravity and collect in the container. The lightest sawdust particles are then captured by the filter cartridge and directed into the collection bag, while cleaned air exits through the sides of the filter. Technical specifications Parameter Specification Tank capacity 118 L Bag dimensions Ø500 x 850 mm Inlet diameter 125 mm Inlet adapter diameters 1 x Ø125 / 2 x Ø100 mm Outlet diameter 125 mm Outlet adapter diameter Ø125 mm / Ø100 mm Weight (net/gross) 24 / 26.5 kg Overall dimensions 785 x 508 x 1545 mm Note: The fan, dust extractor, and Ø100 mm hose are not included in the set.

Condition: ready for operation (used), Overall dimensions: 2500 x 6000 mm Cyclone diameter: 2500 mm Cyclone height: 6000 mm Lasdpfx Aewfrl Asfwsf

Condition: good (used), Overall dimensions: 1130 x 3350 x 1050 mm Output : 125 mm (d) Input: 125 mm (d) Laedpfx Afsnt Uc Rjwof We recommend our vacuum pump 3289 for it. It has a filter and can be cleaned.

Year of construction: 2025, condition: new, functionality: fully functional, Cyclone LZA 800, heavy-duty version, incl. internal wear plate Laodpfx Ajxyzpwofwjf Diameter: 800 mm, total height: 2500 mm Designed for a volumetric flow rate of approx. 5000 m³/h Upper section of cyclone: - Diameter: 800 mm - Height: 800 mm - Material thickness: 3 mm - Internal wear plate: 5 mm (bolted) - Immersion tube Ø350 mm - Inlet nozzle Ø250 mm with beaded edge - Bolt-on flange t=6 mm - Coated in RAL 7035 light grey Lower section of cyclone: - Diameter: 800 mm - Height: 1500 mm - Material thickness: 3 mm - Outlet nozzle Ø300 mm with beaded edge - Bolt-on flange t=6 mm - 2 mounting brackets - Coated in RAL 7035 light grey Other cyclone models in both heavy-duty and light-duty designs, as well as accessories such as rotary airlocks, conveying fans, wind sifters, etc., are available on request.

Condition: used, Year of construction: 2021, total height: 1,800 mm, total length: 1,200 mm, total width: 1,000 mm, overall weight: 150 kg, hose length: 10,000 mm, space requirement height: 1,800 mm, space requirement length: 1,200 mm, space requirement width: 1,000 mm, transport length: 1,200 mm, transport width: 1,000 mm, transport height: 1,800 mm, tank capacity: 50 l, No. 04521 Cyclone pre-separator ESTA ZA 50 Unused, year of construction 2021, in new condition Filter relief for very large amounts of dust The stationary cyclone pre-separators are installed upstream of the actual filter unit and are used to pre-separate dry and free-flowing dusts. Medium and coarse dust particles are already separated in advance so that only the fine dust still needs to be filtered. This reduces the operating costs of the entire extraction system. Cyclone pre-separators achieve a separation efficiency of more than 90% with an average particle size of at least 150 microns. Top cyclone diameter 282 mm Cyclone height 1458 mm Dust container 50 liters Top connection pipe diameter 50 mm Container connection pipe diameter 82 mm Including approx. 10 m suction hose, diameter 50 mm Transport dimensions approx. 1200 x 1000 x 1800 mm LWH Weight approx. 150 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Lsdox Upqhspfx Afwjaf Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Year of construction: 2015, condition: excellent (used), SPX Separator SE161HBIV for use in the Brewery Industry Technical data Width: 1.320 mm. Length: 2.100 mm. Height: 1.725 mm. Weights: Bowl weight: 95 kg. Separator weight: 470 kg. Net weight (with bowl) of separator unit on base frame: 930 kg. Operating features: Hydraulic capacity: 9.000 l/h * Minimum capacity: 2.000 l/h * Maximum capacity: 7.000 l/h Solids chamber capacity: 1,7 l Bowl speed: 11.000 r.p.m. Motor speed: 1.450 r.p.m. Product and process features: Maximum product density: 1,1 kg/dm3 Maximum sludge density: 1,35 kg/dm3 Maximum product temperature: 95 °C Minimum product temperature: 3 °C Electrical system features: Motor power: 11 kW Voltage: 3 x 400 V Lasdpfxoymyhtj Afwsf Auxiliary components voltage: 24 Ac/Dc Frequency: 50 Hz System: three-phase+earth Motor protection level: IP 55 Electrical panel protection level: IP 65 Operation: electro-mechanical controlled by PLC Hydraulic system features: *Required feeding pressure necessary for a machine working at maximum capacity: 1,5 bar Minimum feeding pressure for operating water: 2 bar Operating water consumption for each discharge: 5 l Pneumatic system features: Maximum feeding pressure: 10 bar Operating pressure: 6 ÷ 8 bar Minimum feeding pressure: 4 bar Device has minimal hours worked. In very good condition. Can be viewed on location in Cork, IE

Condition: used, functionality: fully functional, machine/vehicle number: 1674938, We offer this used GEA Westfalia Separator CA 220-010 two-phase decanter, year of manufacture approx. 1985. Type: CA 220-010 Machine number: 1674938 Year of manufacture: approx. 1985 Laedpfx Afeyrdlaewjf Bowl design: cylindroconical with screw conveyor for solid/liquid separation Bowl diameter: 220 mm L/D ratio: 2.65 Screw drive: Cyclo gearbox Connection voltage: 3 phase 400 VAC Connected load: 15 kW If you have any questions or require further information, please send us a message or call us.

Condition: good (used), Filling capacity: 35 kg. Laodpfx Afegl Auxjwof

Condition: used, This listing is for the Clifton Cyclone Vortex Mixer The unit is in full working condition and is ready for immediate use Lsdpfxexv Azms Afwoaf The Clifton Cyclone Vortex Mixer is a high-performance laboratory device engineered for rapid and efficient mixing of liquids in test tubes and small vessels. It creates a powerful vortex in the tube, enabling highly effective and uniform mixing without the need for stirring rods or manual agitation.

Condition: excellent (used), Year of construction: 1996, Compair Cyclon 6000N screw compressor 75kw Laodpfx Afjh Unhnewef power: 75 Kw air transport : 12.9 /min :774 m3/h pressure: 8 bars voltage: 400v 50Hz 3 phase Construction of year: 1996 hours:51000h weight: 1800 kg Size: length: 2100mm width: 1700mm Height: 1510mm If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: excellent (used), functionality: fully functional, Westfalia Separator AG CIP System Westfalia Separator AG CIP System | Tank, Pump, Heat Exchanger System type: CIP (Cleaning In Place) Manufacturer: Westfalia Separatoren AG / GEA Group A complete CIP (Cleaning In Place) installation from the renowned manufacturer Westfalia Separator AG, designed for automatic cleaning and disinfection of process lines in the food and dairy industries. The system is equipped with stainless steel tanks with heating jackets, recirculation pumps, a GEA Ecoflex plate heat exchanger, and a control cabinet. Main components of the system: 1. Stainless steel CIP tanks Brand: Westfalia Separator AG Type: CIP-TANK 3000 L (2 pcs) Serial numbers: 96/00408-1 and 96/00408-2 Year of manufacture: 1996 Capacity: (2×) 3300 liters Operating pressure: 0 bar Operating temperature: 80 °C Dimensions: (2×) 3000 × 1900 × 2300 mm 2. Stainless steel platform with stairs Dimensions: 2950 × 2200 × 2400 mm 3. Stairs Dimensions: 600 × 600 × 500 mm 4. Centrifugal pump Brand: Hilge Type: EURO-HYGIA-B-SUPER-II/60 B Number: 23/96/11349 Capacity: 30 m³/h Power: 11.0 kW Dimensions: 750 × 350 × 450 mm 5. Flow meter Brand: Endress + Hauser Model: Promag 53 Dimensions: 350 × 200 × 200 mm Accurate flow measurement for CIP media. 6. Anema centrifugal pump Dimensions: 530 × 300 × 300 mm 7. Plate heat exchanger Brand: GEA Ecoflex GmbH Type: VT20 CDS Serial number: 170/13832 Dimensions: 900 × 550 × 1500 mm High efficiency heat transfer for CIP solution preparation. Laedsxtvb Uspfx Afwsf 8. Control cabinet Dimensions: 670 × 220 × 800 mm Responsible for controlling and monitoring CIP system operation. 9. Stainless steel buffer tank (CIP tank) Tank dimensions: Ø 800 × 800 mm Overall dimensions: 1150 × 900 × 1770 mm 10. Anema centrifugal pump, number: 32078 Operating pressure: 12 bar Dimensions: 650 × 400 × 450 mm The Westfalia Separator AG CIP system is a comprehensive solution for cleaning process installations, providing: - high process hygiene, - monitoring of cleaning parameters (temperature, flow, time), - integration capability with dairy, food, or beverage production lines. The use of components from GEA, Hilge, Endress + Hauser, and Anema ensures reliability and long service life of the system.

Condition: used, Separator element for pallet racking system. Suitable for frames with a depth of 1000-1050-1100 mm. Lajdpfek Tzzlox Afwef Arm length: 500 mm For a 2700 mm bay with 6 arms, 24 pieces – 67 EUR + VAT/piece For a 2700 mm bay with 10 arms, 46 pieces – 89 EUR + VAT/piece For an 1800 mm bay with 7 arms, 4 pieces – 51 EUR + VAT/piece If you require shelving or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelving, as well as accessories, and will be happy to assist you with your planning. Additional accessories available include: Frame, corner, and impact protectors, push-through guards, chipboard, grating, back panel grating, and deep shelf supports. Shipping: Please inquire about shipping costs, providing your postal code, location, and the desired quantity of items. Further service offerings: Planning, shelving assembly/disassembly, purchase/sale Subject to changes and errors in technical data, specifications, and prices, as well as prior sale!

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 1670 242, Equipment: CE marking, documentation/manual, Fully functional Westfalia separator, all documents, tooling and cover hoist crane included. Last operational 12.2024. Laedpew Icgbofx Afwof

Condition: like new (used), Year of construction: 2020, operating hours: 50 h, machine/vehicle number: LW250*1000, Decanter centrifuge manufactured in 2020, but put into operation in May 2021! The machine is in like new condition (used in total approx. 50 operating hours)! The decanter is for sale due to a change in technology, it works flawlessly! Manufacturer: YIXING HEAD SEPARATOR MACHINERY CO. LTD., CHINA Year of manufacturing date: 2020 Serial Number: LW250*1000 Machine signal: 02-001 Ljdpfx Afepu A D Aswjaf Decanter indication number: 2647 Sludge formation capacity of decanter: 500 kg/h Main motor capacity: 7,5 KW Vice motor capacity: 3 KW Capacity: 1-5 m3/h Netto weight of decanter: 1000 kg Material of wetted parts:1.4404 Feed volume flow: 0,5t – 3t/h Stainless steel Reference number: 2590

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 043804 / 55060428, No minimum price – guaranteed sale to the highest bidder! Two machines are offered for sale as a package: 1. Lapping machine Bierther ELAP700-91S 2. Oil mist separator Donaldson B.V.B.A. DMC-MMC Both machines have recently been inspected and certified by DGUV. Data for the BIERTHER ELAP700-91S: TECHNICAL DETAILS Diameter of lapping disc: 700 mm Inner diameter of truing rings: 275 mm Number of truing rings: 3 Rated speed: 56 rpm MACHINE DETAILS Mains voltage: 400 V Mains frequency: 50 Hz Mains connection: 3P + N Fusing: 16 A Current consumption: 8 A Motor power: 2.2 kW Power of lapping compound pump: 55 W Sound pressure level: < 70 dB(A) Tank capacity: 10 l Compressed air connection: 4 bar Lajdpfjztqxzjx Afwof Dimensions & Weight Dimensions (L x W x H): 1,200 x 1,200 x 1,900 mm Height without pneumatics: 1,400 mm Weight without pneumatics: 750 kg Total weight: 900 kg EQUIPMENT Crossbeam for forklift attachment DGUV-certified Data for the DONALDSON B.V.B.A. DMC-MMC: TECHNICAL DETAILS Air volume flow rate: 2,000 m³/h MACHINE DETAILS Dimensions & Weight Installation dimensions (L x W x H): 1,600 x 670 x 2,000 mm Weight: 200 kg EQUIPMENT DGUV-certified

Condition: used, Used Alfa Laval model PX60VGD-140G stainless steel separator centrifuge. Bowl speed max. 6240 rpm. Equipped with 18.5 kW/50 Hz/1500 rpm motor. Some tools available. New in 2003. Laedszvyi Ijpfx Afwof

Condition: used, Used GEA Westfalia CSA 160-47-076 separator centrifuge. Working speed of bowl up to 6800 rpm. Maximum temperature up to 100°C. Machine is driven by Atex rated electric motor 30 kW, 50 HZ. Also includes tools. Lsdezvychopfx Afwjaf

Condition: good (used), functionality: fully functional, “Steinert NES 150 220 E 5009” for Sale Manufacturer: Steinert Type: NES 150 220 E 5009 Belt widthness: 1.500 mm (New belt) Lodpfx Afozvbviowsaf With new control-unit. Overhauled, balanced, sandblasted and painted.

Condition: refurbished (used), Bone Separator Make: Baader Model: 603 Rated at 2200kg raw material per hr 3mm drum Overhauled with new bearings, bushes, seals, scraper, belt, Ledpfx Afozr Rbaowsaf Resharpened drum Renewed electrics Excellent condition, Ready to Go!

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 2215, Type: OptiFlour 600 II Serial number: 2215 Year of construction: 2013 Belt width: 600 mm Power: 3 x 400V, 50Hz, 5.3kW Dimensions: 2750 x 1650 x 2300 mm Weight: 1025 kg GEA OptiAir cyclone Type: OPA Laodjymbfajpfx Afwjf Serial number: 515 Year of constuction: 2011 Power: 3 x 400V, 50Hz, 4kW Dimensions: 1350 x 950 x 1800 mm Weight: 450 kg

Year of construction: 1980, condition: good (used), Oil-air separation system, condensate separator, oil and water separation apparatus, oil separator, oil/water separator, air compressor oil-water separator, air receiver Ljdpfxezt I Rzj Afwjaf -Manufacturer: Atlas Copco, Oil-Water Separation System Air Receiver from Compressor GA 408 Pack -Type: 1615 2653 -Pressure: max. 11 bar -Dimensions: 315/200/H500 mm -Weight: 22.2 kg