Used Cylindrical Grinder for sale (2,316)

Condition: used, sanding disc diameter / mm Rcedpfx Amszhxm Ne Tod Motor output / kW Overall size / mm machine weight ab. / kg

Condition: used, Year of construction: 2012, workpiece . workpiece diameter 15 -70 mm swing diameter max. 150 mm clamping length max. 500 mm Swing over bezel area 70 mm dimension 150 x 300 mm max. turning speeds 250 min/-1 longitudinal adjustment manuell über Kettenrad Fixed tip MK 4 (Junker D75 mm) clamping capacity ü. Hydraulik einstellbar travel -z axis max. 1000 mm feed z - Achse (CNC gesteuert) dimension D 205 x 450 mm flange diameter D 190 mm standards association D 127 mm drive 30 kW speed control mit Frequenz- Umformer max. turning speeds 4400 min/-1 type Borazon (CBN) o. Diamant mm diameter 450 mm bore D 127 mm peripheral speed max. 90 m/sec type GR-3520-NR mm diameter range D 20 - D 35 mm dimension D 80 x 250 mm flange D 100 standards association D 75 drive 1,8 kW max. turning speeds 24000 min/-1 weight of the machine ca. 7,0 t In our opinion, the machine is in good condition and can be inspected under power by appointment. There are 2 identical machines available. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Rjdpfx Asx H Andsm Tjcd Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: good (used), Year of construction: 2018, 0 40 kW air pressure 5 bar range L-W-H 2850 x 2470 x 2290 mm weight 7.000 kg External grinding, internal grinding, hard turning, measurement DVS UGrind – Incredibly impressive. – Efficient complete machining with grinding, turning and measuring tools on a single multifunctional head – Ideal for small to medium batch sizes of shafts and chuck components with a centre-to-centre distance of up to 1,200 mm – Machine bed made of natural granite for high dynamic and thermal rigidity – Consistently precise machining results thanks to a hydrostatically supported tailstock – Faster achievement of targetdimensions thanks to the intuitive DVS UCee operating system – Footprint of just 7 or 8.5 m²,including coolant system. --> BUDERUS, Type: U-Grind 800 --> Control system: Bosch Rexroth MTX, IndraControl L45.1, 15" display --> Centre distance: 1.200 mm --> Max. outer diameter: 350 mm --> Max. workpiece weight between centres: 50 kg - Cross slide: X-axis - --> max. travel: 500 mm --> max. speed: 30 m/min --> resolution: 0.1 µm - Longitudinal slide: Z-axis - --> max. travel: 800 mm --> max. speed: 30 m/min --> Resolution: 0.0005 – 0.1 mm - Multifunction head (B-axis) - --> Swivel range: -45° to +225° --> Swivel time for 180°: Positioning accuracy: 0.0002° --> Repeatability: 1" --> Resolution: 0.001° - External machining - --> Max. machining length: 750 mm --> Peripheral speed: 50 corundum / 80 CBN --> Drive power: 15 kW --> Max. wheel dimensions: Ø400 x 50 x 152.4 mm - Internal machining - --> Max. bore diameter: 250 mm --> Max. bore depth: 235 mm --> Drive power S1: 1.8 – 7.5 --> Speed range: 30.000 to 50.000 rpm - Workpiece spindle C-axis - --> Max. speed: 1.500 rpm --> Drive power: 1.8 kW --> Drive torque: 90 Nm --> Measuring system resolution: 0.001° --> Roundness accuracy: 0.8 µm --> Positioning accuracy: 0.0001° - Tailstock - --> Quill stroke: 50/80 mm --> Quill diameter: 60 mm --> Bearing: hydrostatic --> Fine adjustment for cylindricity corrections: ±40 µm - 3-point centre - --> Clamping range: Ø20 – Ø150 mm --> Coarse adjustment: 40 µm --> Fine adjustment: 2 µm --> Feed rate: infinitely variable Rcjdpfx Amsyrhnrj Tod Highlights: > Complete machining in a single set-up. Turn whatever can be turned; grind whatever needs grinding. > Short set-up times, quick to programme – a machine that’s a pleasure to work with and gets the job done quickly. > Intuitive and ergonomic: good accessibility, crane loading, intuitive operation via touchscreen and ready-made programme modules. > Compact footprint thanks to integrated coolant treatment > Optional automation solutions: with our ULoad or a customised solution, for example from rbc robotics, the DVS UGrind can also operate fully automatically.

Condition: good (used), Year of construction: 2018, 0 40 kW air pressure 5 bar range L-W-H 2850 x 2470 x 2290 mm weight 7.000 kg External grinding, internal grinding, hard turning, measurement DVS UGrind – Incredibly impressive. – Efficient complete machining with grinding, turning and measuring tools on a single multifunctional head – Ideal for small to medium batch sizes of shafts and chuck components with a centre-to-centre distance of up to 1,200 mm – Machine bed made of natural granite for high dynamic and thermal rigidity – Consistently precise machining results thanks to a hydrostatically supported tailstock – Faster achievement of targetdimensions thanks to the intuitive DVS UCee operating system – Footprint of just 7 or 8.5 m²,including coolant system. --> BUDERUS, Type: U-Grind 800 --> Control system: Bosch Rexroth MTX, IndraControl L45.1, 15" display --> Centre distance: 1.200 mm --> Max. outer diameter: 350 mm Rodsyrhnfepfx Am Tocd --> Max. workpiece weight between centres: 50 kg - Cross slide: X-axis - --> max. travel: 500 mm --> max. speed: 30 m/min --> resolution: 0.1 µm - Longitudinal slide: Z-axis - --> max. travel: 800 mm --> max. speed: 30 m/min --> Resolution: 0.0005 – 0.1 mm - Multifunction head (B-axis) - --> Swivel range: -45° to +225° --> Swivel time for 180°: Positioning accuracy: 0.0002° --> Repeatability: 1" --> Resolution: 0.001° - External machining - --> Max. machining length: 750 mm --> Peripheral speed: 50 corundum / 80 CBN --> Drive power: 15 kW --> Max. wheel dimensions: Ø400 x 50 x 152.4 mm - Internal machining - --> Max. bore diameter: 250 mm --> Max. bore depth: 235 mm --> Drive power S1: 1.8 – 7.5 --> Speed range: 30.000 to 50.000 rpm - Workpiece spindle C-axis - --> Max. speed: 1.500 rpm --> Drive power: 1.8 kW --> Drive torque: 90 Nm --> Measuring system resolution: 0.001° --> Roundness accuracy: 0.8 µm --> Positioning accuracy: 0.0001° - Tailstock - --> Quill stroke: 50/80 mm --> Quill diameter: 60 mm --> Bearing: hydrostatic --> Fine adjustment for cylindricity corrections: ±40 µm - 3-point centre - --> Clamping range: Ø20 – Ø150 mm --> Coarse adjustment: 40 µm --> Fine adjustment: 2 µm --> Feed rate: infinitely variable Highlights: > Complete machining in a single set-up. Turn whatever can be turned; grind whatever needs grinding. > Short set-up times, quick to programme – a machine that’s a pleasure to work with and gets the job done quickly. > Intuitive and ergonomic: good accessibility, crane loading, intuitive operation via touchscreen and ready-made programme modules. > Compact footprint thanks to integrated coolant treatment > Optional automation solutions: with our ULoad or a customised solution, for example from rbc robotics, the DVS UGrind can also operate fully automatically.

Condition: good (used), Code: 0460 Brand: SAMCO Model: LL 3000 Belt sander with double goose neck for wood, furniture, window frames, composite materials, aluminium and various Technical data: Cast-iron structure Table length mm 3000 Table width mm 800 Vertical stroke mm 650 Motor Hp 4 N°2 speeds rpm 1450/2800 Automatic table lifting Belt width mm 120 Belt length max mm 8000 Rjdpfx Amozpvy Aj Tjcd Overall dimensions mm 4350 x 1500 x 1550 h Weight kg 600

Condition: excellent (used), Speed (rpm): 1400 Voltage: 3x400V-50 Hz Power (kW): 3 Wheel size, driving wheel (ø mm): 200x100x28 Abrasive belt (mm): 100x1600 Tube diameter (ø mm): 21-76 Extraction capacity (m³/h): 600 With extraction unit Length (mm): 1430 Width (mm): 810 Height (mm): 1350 Net weight (kg): 205 Tube Notcher with Motor Brake - SCANTOOL 100 RSX The Scantool 100 RSX is the ideal tube grinding machine for all types of tubes and profiles. It simplifies welding and delivers a superior finish. The Scantool 100 RSX has been designed with series production in mind, where precision and clean work are required. Typical applications include the manufacture of railings, frames, go-karts, roll cages, wheelchairs, ship fittings, handrails, gates, fences, furniture frames, and stainless steel tube and profile works for the food industry, among others. The Scantool 100 RSX grinds tubes and profiles made from any material in the range of Ø 21 to 76 mm. Built-in powerful extraction The Scantool 100 RSX features an integrated high-performance dust extraction unit that removes most of the grinding dust directly at the belt. For the best dust collection solution, the Scantool 100S can be installed directly behind the belt grinder. The Scantool Cyclone 100S is available as an optional accessory. Key advantages of the Scantool 100 RSX tube grinder: Rcsdpfew Ew D Rsx Am Tod • The only tube notcher on the market where the grinding unit can be set to the desired grinding angle • Does not require lateral space when grinding long tubes • Any angle can be set quickly and easily—without the need for tools • Precision grinding of tubes and profiles at any angle • Perfect adjustment of the contact roller to the required diameter • High-quality and robust side guidance • Ideally suited for series production. Original images coming soon.

Condition: good (used), Year of construction: 1986, functionality: fully functional, total height: 1,800 mm, total length: 2,500 mm, total width: 1,000 mm, spindle speed (max.): 7,000 rpm, spindle speed (min.): 1,400 rpm, type of input current: three-phase, overall weight: 1,000 kg, number of spindles: 1, TECHNICAL DATA & EQUIPMENT: Serial number: 765 Operating voltage: 380 V Frequency: 50 Hz Rated current: 14 A Voltage range: Geb Azzknsw D T T Sodoka Maximum height of the universal headstock: 170 mm Maximum height of the tailstock: 120 mm Maximum height of the tailstock with intermediate bearing: 170 mm Largest workpiece diameter between centers: 338 mm Largest workpiece diameter with floating support: 600 mm Largest distance between centers: 950 mm Internal taper of the headstock spindle: MK 4 T-slots in the machine bed: 12 mm T-slots in other parts: 8 mm Range of movement: Working range, grinding stroke: 190 mm Transverse adjustment of the tool carrier: 100 mm Vertical adjustment of the grinding head: 325 mm Feed of the grinding spindle: 5 mm Rough adjustment range of the tool carrier: 230 mm Grinding head carrier: 800 mm Universal headstock on the tool slide: 330 mm Rjdpfx Ajw Nn Aksm Tjcd Swivel range of the grinding head carrier: 360° Grinding head: 360°, tool carrier: 360° Universal headstock, horizontal and vertical: 360° Grinding length during spiral grinding: max. 190 mm Maximum rotation of the headstock spindle during spiral grinding: 1.5 revolutions Grinding wheel, largest diameter: 125 mm Cutting disc, largest diameter: 200 mm Spindle speed: 1400 - 7000 rpm The machine is equipped with two-axis optical measuring devices, a dressing device, a table extension with a center, and is NOTES REGARDING PICKUP: loaded onto a truck, forklift available available immediately

Condition: excellent (used), Year of construction: 1999, Jung C-740-C Rjdpfx Amju I Rtie Tjcd year of construction: 1999 control: siemens magnet: 700 x 400 mm max. grinding range: 880 x 460 x 550 mm ( x,z,y) magnet variable attraction force variable speed: 1500-3500 rpm max. load on the table: 800 kg top clamp bottom clamp 2x remote control balancer various grinding stones documentation machine is under power for inspection

Condition: excellent (used), operating hours: 4,589 h, functionality: fully functional, center height: 100 mm, grinding length: 400 mm, Studer S20-2 Operating hours: 4589 Centre height: 100 mm Max. grinding length: 400 mm Internal and external grinding Extra spindle Coolant filtration system Large number of accessories Cabinet Documentation Machine is powered for inspection Rcsdpfx Ajzgtwaem Tjd

Condition: good (used), Year of construction: 2012, Kent KGS 250 WM1 surface grinding machine year of manufacture: 2012 max. grinding range: 460 x 200 mm Rcedpfsx A D H Rox Am Tsd max. height: 300 mm top dresser electronic handwheel variable magnetic force central lubrication touchscreen with settings for rough and finish grinding, etc. cooling water/filter tray documentation machine is powered on for inspection

Condition: new, functionality: fully functional, working width: 1,500 mm, sheet thickness (max.): 102 mm, total length: 1,300 mm, total width: 3,100 mm, total height: 2,600 mm, overall weight: 2,600 kg, workpiece height (max.): 102 mm, pass-through width: 1,500 mm, An all-in-one machine: removing slag, burrs, and oxides Reliable and clean removal of slag using slag hammer brushes EdgeRacer the Grinder effortlessly removes the slag that forms on the underside during plasma or oxy-fuel cutting. The disc brushes are adjusted so that they almost touch the underside. The steel bristles then knock off the slag. Powerful deburring and defined edge rounding EdgeRacer® the Grinder effortlessly removes stubborn stamping burrs and laser beads/splatter. By adjusting the brush feed, you also determine the edge rounding performance. Rcodpfjwzybksx Am Tjd Deburring and edge rounding of thin sheet metal and 3D workpieces Deburr thin sheets or sheets with cut-outs. The grinding brushes can be extended beyond the transport level, so that the entire workpiece edge is processed. The oxide disc can be used to remove oxide layers on internal and external contours. Full working width or double performance – optimally adapted to your needs Depending on the width of the parts to be processed, you can choose between two processing modes. Select single-row processing to fully utilize the working width, whether for wide parts or for parallel feeding. To optimize tool wear, the brushes automatically change their position. For narrower workpieces, choose the double-row processing. This achieves double the processing in a single pass.

Condition: used, Year of construction: 1998, functionality: fully functional, type of input current: three-phase, table length: 1,500 mm, table width: 130 mm, overall weight: 450 kg, grinding height: 200 mm, input frequency: 50 Hz, - Used machine - Year of manufacture: 1998 - Condition: well-maintained, CE marking TECHNICAL SPECIFICATIONS: - Dimensions of the sanding belt: 2300 x 200 mm - Dimensions of the grinding surface: 800 x 230 mm - Belt speed: 8 / 12 m/s - Dimensions of the work table: 1500 x 130 mm - Dimensions of the tilting work table: 150 x 130 mm - Tilting angle of the work table: 0 – 45 º Redpfezinlwsx Am Tjcd - Working height: 870 mm - Diameter of the drive roller: Ø 140 mm - Diameter of the guide roller: Ø 90 mm - Motor power (2 speeds): 3 kW - Motor power for oscillation: 0.22 kW - Diameter of the dust extraction nozzle: Ø 160 mm - Overall dimensions: 1500 x 900 x 1600 mm - Weight: 450 kg

Condition: used, Year of construction: 1974, mechanical ja Rcodpfey Ty Riox Am Ted centre distance 2000 mm weight of the machine ca. 7,9 t

Condition: used, Year of construction: 1970, mechanical ja centre distance 2000 mm Rcjdpfxey Ty N Sj Am Tod weight of the machine ca. 7,9 t

Condition: as good as new (ex-display), Year of construction: 2026, Center height: 181 mm Center distance: 650 mm Maximum grindable workpiece diameter: 360 mm Max. load (overhung): 1000 N / 100 kg Max. load (between centers): 3000 N / 300 kg Z-axis Table swivel angle: 10° Table drive hydraulic: 0–4 m/min X-axis Cross slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse positioning—air cushion: 280 mm Infeed drive via DC motor Rapid feed rate: 48 mm/min/Ø Infeed process: Plunge / Longitudinal grinding 4 pre-selectable feed rates: mm/min/Ø 0.01–48 Rcsdetqf Sqjpfx Am Tod 4 pre-selectable infeed increments: mm/ 0.001–0.1 Spark-out during end stop grinding: s 0–99 / 0–99 strokes Jog infeed: mm/Ø 0.001 Grinding spindle headstock—universal, swiveling: degrees 0–180 Grinding wheel (external): D x width x bore mm 500x100x127 or 203.2 Grinding wheel (face, option): D mm 250x32x76.2 Grinding wheel (internal, option): D mm (2–250) Drive power (external, face): kW 5.5 (7.5) Drive power (internal): kW 2.2 Peripheral speed (external): m/s 35 (50) Grinding wheel wear (external): mm/Ø 160 Wheel guard width: mm 100 Grinding spindle diameter: mm 60 Internal spindle mount: mm 80 (100) Workpiece headstock: Infinitely variable drive, MK 4: 1/min 30–270/ 50–450 Workpiece spindle lockable Spindle mount: mm MK 4/24 Spindle nose for flange mounting: MK 4 mm cylindrical Ø63H6 x 6 Workpiece headstock swivels on the rotary part: degrees 0–90 Tailstock: Quill mount / quill diameter: mm MK 4/750 Quill stroke mm: 45 Quill force N: 100–800 / 250–1400, adjustable Quill actuation: manual (foot switch) Quill fine adjustment: ±40μm Connections: Total power requirement of the machine: kW 6.5–10 Grinding spindle headstock: kW 5.5 (7.5) Workpiece headstock: kW 0.55 (1.1) Coolant cleaning: kW 0.75–2.2 Guideway lubrication pump: kW 0.1 Hydraulic pump: kW 1.5 Hydraulic tank: liters 80 Pneumatics: bar 6 Similar to Weiss/ EMAG/ GP cylindrical grinding machines/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat/ Bahmüller/ Fortuna

Condition: refurbished (used), Year of construction: 2026, Karstens K11 1000, Fully Equipped This cylindrical grinding machine has been completely overhauled at PS-Karstens. The machine has been inspected and is in very good condition. Since we specialize in Karstens cylindrical grinding machines, we can offer you a complete service (electrical and mechanical) for the machine after purchase. Technical Data: Center distance: 1000 mm Center height: 180 mm Workpiece weight: 100 kg (overhanging), 250 kg (between centers) Grinding wheel diameter: 400 mm Workpiece spindle: MK 4, stepless speed adjustment 30-450 rpm, swivel range 0 - 90 ° Tailstock: MK4, quill stroke 45 mm, fine adjustment with cylinder Quill force: 200-600 N, hydraulically operated via foot pedal Table inclination: 10 degrees Adjustment travel of the feed spindle: 80 mm Rapid traverse: 50 mm Coarse adjustment with air cushion: 280 mm Grinding spindle motor (external): 4 KW Grinding spindle motor (internal): 2.2 KW Workpiece spindle motor: 0.55 KW Machine weight: Net 3800 kg Feed drive via DC motor Air cushion-assisted rapid adjustment of the grinding spindle head for quick and safe approach to the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic operating sequence, feed movement via a wind rose switch: Rapid traverse forward, rapid traverse backward, grinding operation, feed stop, incremental feed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Workpiece spindle head with steplessly adjustable drive with a rotating and lockable spindle. Feed control for longitudinal grinding and plunge grinding, input for retraction, feed amounts, Rsdoh Riwdjpfx Am Tocd feeds, dwell times, rapid traverse Digital displays for grinding spindle B-axis, workpiece spindle, X-axis, Z-axis from HEIDENHAIN Paper band filter system, approx. 250 L Similar to Weiss/EMAG/GP cylindrical grinding machines/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat /Bahmüller/Fortuna

Condition: new, We offer you spare parts of all kinds for your conventional or CNC Karstens / EMAG WEISS / GP cylindrical grinding machine—covering your tailstock, workpiece headstock, grinding spindle headstock, ball screw spindles, glass scales, grinding wheel flanges, drive motors, axis drives (BOSCH SIEMENS), ECKELMANN controls, bellows, bearings, K11/K21 infeed controls (new and used), as well as Z-axis reversing blocks for exchange. We service machines from year of manufacture 1955 onwards: ASA-ASE-K10-K11-K12-K13-K16-K19-K21-K22-K23-K24-K25-K26-K27-K28- K29-K33-K35-K37-K50-K51-K52-K53-K57-W11-W21-GP cylindrical grinding machines—all assemblies based on Karstens design. Rcodpfsup Aikex Am Tjd Comparable/ EMAG-WEISS/ GP cylindrical grinding machines/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat.

Condition: new, We offer all types of spare parts for your conventional or CNC Karstens/GP cylindrical grinding machine, including components for your tailstock, workpiece spindle head, grinding spindle head, ball screws, glass scales, grinding wheel flanges, drive motors, axis drives (BOSCH SIEMENS), bellows, bearings, K11/K21 infeed control systems—new and used—as well as reversing blocks for the Z axis on an exchange basis. Also suitable for similar Weiss/EMAG/GP cylindrical grinding machines, Studer, Kellenberger, Schaudt, Tschudin, Tacchella, Dannobat, Bahmüller, Fortuna. Rsdpfx Amsraibve Tocd

Condition: excellent (used), Year of construction: 1980, Karstens K11 1000 This Karstens K11 comes from a university and has seen very little use. All cables and hoses in the wet area have been replaced. It has extremely few operating hours. Since we specialize in Karstens round grinding machines, we can offer you complete service (electrical and mechanical) for the machine after purchase. Technical data: Center distance: 1000 mm Center height: 180 mm Workpiece weight: 70 kg cantilevered, 250 kg between centers Grinding wheel diameter: 400 mm Workpiece spindle: MK 4, speed continuously adjustable 30-450 rpm, swivel range 0 - 90 ° Tailstock: MK4, quill travel 45 mm Tailstock rest next to the Z-axis table Quill force: 200-600 N Table tilt: 12.5 degrees Adjustable travel of the feed spindle: 80 mm Rapid traverse: 50 mm Coarse adjustment with air cushion: 280 mm Grinding spindle motor (external): 4 KW Grinding spindle motor (internal): 2.2 KW Workpiece spindle motor: 0.55 KW Machine weight: Net 3500 kg Feed drive via DC motor Air cushion-supported rapid adjustment of the grinding spindle stock for quick and safe positioning of the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic working cycle, feed movement via a wind rose switch: Rapid traverse forward, rapid traverse backward, grinding operation, feed stop, mym feed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Workpiece spindle stock with continuously adjustable drive for both rotating and lockable spindle. Feed control for longitudinal grinding and face grinding, input for retraction, feed amounts, feeds, dwell times, clearance strokes Rcsdpfx Amoh Rit Eo Ted Digital display for X-axis from Heidenhain Paper band filter system can be offered upon request. Similar to Weiss/EMAG/GP round grinding machines/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat .

Condition: refurbished (used), Year of construction: 2026, Karstens K11 650 This cylindrical grinding machine has been completely overhauled by PS-Karstens. The machine has been inspected and is in very good condition. Since we specialize in Karstens cylindrical grinding machines, we can offer you complete service (electrical and mechanical) for the machine after purchase. Technical data: Distance between centers: 650 mm Distance between centers: 180 mm Workpiece weight: 100 kg cantilevered, 250 kg between centers Grinding wheel diameter: 400 mm Workpiece spindle: MK 4, speed continuously adjustable 30-450 rpm, swivel range 0 - 90 ° Tailstock: MK4, quill stroke 45 mm, cylinder fine adjustment Quill force: 200-600 N, hydraulically operated via foot pedal Table inclination: 10 degrees Adjustment travel of feed spindle: 80 mm Rapid traverse: 50 mm Rough adjustment with air cushion: 280 mm Grinding spindle motor external: 4 KW Grinding spindle motor internal: 2.2 KW Workpiece spindle motor: 0.55 KW Machine weight: Net 3800 Kg Feed drive via DC motor Air cushion-supported rapid adjustment of the grinding spindle head for quick and safe positioning to the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic process, feed movement via jog shuttle switch: Rapid traverse forward, rapid traverse backward, grinding operation, feed stop, incremental feed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Workpiece spindle head with continuously adjustable drive with a rotating and lockable spindle. Feed control for longitudinal grinding and plunge grinding, input for retraction, feed amounts, feed rates, dwell times, non-cutting travel Rcodpsh Rixxjfx Am Tjd Paper band filter system approx. 250 L Similar to Weiss/EMAG/GP cylindrical grinding machines/ Studer/ Kellenberger/ Schaudt/ Tschudin/ Tacchella/ Dannobat/ Bahmüller/ Fortuna

Condition: as good as new (ex-display), Year of construction: 2026, Karstens K11 1000 Premium Retrofit Cylindrical Grinding Machine Manufacturer: Karstens Technical Data: Center distance: 1100 mm Center height: 180 mm / (250 mm = Option) Workpiece weight: 100 kg unsupported, 300 kg between centers Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) Workpiece spindle: MK 4, infinitely variable speed adjustment 30-450 rpm, swivel range 0 - 90° Tailstock: MK4, quill stroke 45 mm Quill force: 200-600 N manually, (up to 2500 N possible, adjustable = Option) Table tilt: 10 degrees Adjustment travel of feed spindle: 80 mm Rapid traverse: 50 mm Rough adjustment with air cushion: 280 mm Grinding spindle motor (external): 4 KW / (5.5 KW = Option) Infinitely variable speed adjustment of the grinding wheel with potentiometer Grinding spindle motor (internal): 2.2 KW Workpiece spindle motor: 1.1 KW Hydraulic motor: 1.5 KW Lubrication motor: 0.1 KW Hydraulic tank: 80 liters Machine weight: Net 3800 kg Feed drive via DC motor Air cushion-assisted rapid adjustment of the grinding spindle stock for quick and safe approach to the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic operating sequence, feed movement via wind rose switch: Redpfxsiv Au Eo Am Tscd Rapid traverse forward, rapid traverse backward, grinding operation, feed stop, incremental feed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Workpiece spindle stock with infinitely variable drive with a rotating and lockable spindle. New digital feed control with Siemens panel and Siemens PLC for longitudinal grinding and plunge grinding, input for retraction, feed amounts, feeds, dwell times, rapid traverse distances, compatible with the old Karstens feed control, with a color Siemens touch panel, scale in X and Z axis, manufacturer HEIDENHAIN. Similar to Weiss/EMAG/GP cylindrical grinding machines/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat /Bahmüller/Fortuna

Condition: as good as new (ex-display), Year of construction: 2026, Karstens K11 650 Premium Retrofit Round Grinding Machine Manufacturer: Karstens Technical Specifications: Center distance: 750 mm Center height: 180 mm / (250 mm = Option) Workpiece weight: 100 kg cantilevered, 250 kg between centers Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) Workpiece spindle: MK 4, speed continuously adjustable 30-450 rpm, swivel range 0 - 90 ° Tailstock: MK4, quill stroke 45 mm, cylindrical correction Quill force: 200-600 N manually, (up to 2500 N possible, adjustable = Option) Table inclination: 12.5 degrees Travel of the feed spindle: 80 mm Rapid traverse: 50 mm Rough adjustment with air cushion: 280 mm Grinding spindle motor, external: 4 kW / (5.5 kW = Option) Continuously adjustable grinding wheel speed with potentiometer Grinding spindle motor, internal: 2.2 kW Rcsdpfsiv Audjx Am Ted Workpiece spindle motor: 1.1 kW Hydraulic motor: 1.5 kW Lubrication motor: 0.1 kW Hydraulic tank: 80 liters Machine weight: Net 3500 kg Feed drive via DC motor Air cushion-supported rapid adjustment of the grinding spindle head for quick and safe positioning to the grinding location. Separate drive for the spindles for external and internal grinding. Fully automatic operating sequence, feed movement via wind rose switch: Rapid traverse forward, rapid traverse backward, grinding operation, feed stop, incremental feed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Workpiece spindle head with continuously adjustable drive with a co-rotating and lockable spindle. Feed control, digital with Siemens panel and Siemens PLC for longitudinal grinding and plunge grinding, input for retraction, feed increments, feeds, dwell times, idle strokes, compatible with the old Karstens feed control, with color Siemens touch panel Scale in X and Z axes, manufacturer HEIDENHAIN. Similar to Weiss / EMAG / GP round grinding machines / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat / Bahmüller / Fortuna.

Condition: as good as new (ex-display), Year of construction: 2026, Centre height: 181 mm Centre distance: 1000 mm Maximum grindable workpiece diameter: 360 mm Max load cantilevered: 1000 N (100 kg) Max load between centres: 3000 N (300 kg) Z-axis: Table swivel angle: 10° Table drive, hydraulic: 0–4 m/min X-axis: Cross slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment – air cushion: 280 mm Infeed drive by DC motor Redpfx Amjtqf Rzj Tjcd Rapid infeed speed: 48 mm/min/Ø Infeed cycle: Plunge grinding / Longitudinal grinding 4 preselectable speeds: mm/min/Ø: 0.01–48 4 preselectable infeed increments: mm: 0.001–0.1 Automatic shut-off during stop-grinding: 0–99 s or 0–99 strokes Stepwise infeed: mm/Ø: 0.001 Grinding headstock universal, swivelling: 0–180° Grinding wheel (OD): D x width x bore: 500 x 100 x 127 mm or 203.2 mm Grinding wheel (face, option) D: 250 x 32 x 76.2 mm Grinding wheel (ID, option) D: 2–250 mm Drive power, external/face: 5.5 (7.5) kW Drive power, internal: 2.2 kW Peripheral speed, external: 35 (50) m/s Grinding wheel wear (OD): mm/Ø: 160 Guard width: 100 mm Grinding spindle diameter: 60 mm Internal spindle mounting: 80 (100) mm Workpiece headstock: Infinitely variable drive: MK 4, 1/min: 30–270 / 50–450 Workpiece spindle lockable Spindle mounting: MK 4/24 mm Spindle nose for flange attachment: MK 4, cylindrical Ø63H6 x 6 mm Headstock swivels on rotating part: 0–90° Tailstock: Quill mounting / Quill diameter: MK 4, 750 mm Quill stroke: 45 mm Quill force, N: 100–800 / 250–1400 adjustable Quill operation: manual (foot switch) Quill fine adjustment: ±40 μm Connections: Total machine connected load: 6.5–10 kW Grinding headstock: 5.5 (7.5) kW Workpiece headstock: 0.55 (1.1) kW Coolant filtration: 0.75–2.2 kW Lubrication pump – guideways: 0.1 kW Hydraulic pump: 1.5 kW Hydraulic tank: 80 l Pneumatics: 6 bar Comparable to: Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat

Condition: as good as new (ex-display), Year of construction: 2026, Karstens K11 1000 Premium Retrofit Cylindrical Grinding Machine Manufacturer: Karstens Technical Data: Distance between centers: 1100 mm Rodpfx Ash Rimmsm Tecd Center height: 180 mm / (250 mm = Option) Workpiece weight: 100 kg cantilevered, 300 kg between centers Grinding wheel diameter: 400 mm or 500 mm (external grinding wheel) Workpiece spindle: MK 4, stepless speed control 30-450 rpm, swivel range 0 - 90° Tailstock: MK4, quill travel 45 mm Quill force: 200-600 N manual, (up to 2500 N possible, adjustable = Option) Table inclination: 10 degrees Travel of the infeed spindle: 80 mm Rapid traverse: 50 mm Rough adjustment with air cushion: 280 mm Grinding spindle motor external: 4 kW / (5.5 kW = Option) Stepless speed adjustment of the grinding wheel with potentiometer Grinding spindle motor internal: 2.2 kW Workpiece spindle motor: 1.1 kW Hydraulic motor 1.5 kW Lubrication motor 0.1 kW Hydraulic tank 80 liters Machine weight: Net 3800 kg Infeed drive via DC motor Air cushion-assisted rapid adjustment of the grinding spindle head for quick and safe positioning of the grinding position. Separate drive for the spindles for external and internal grinding. Fully automatic operating sequence, infeed movement via a wind rose switch: Rapid traverse forward, rapid traverse backward, grinding operation, infeed stop, incremental infeed. Automatic longitudinal grinding cycle Central coolant supply for all grinding points Workpiece spindle head with steplessly adjustable drive with a rotating and lockable spindle. New digital infeed control with Siemens panel and Siemens PLC for longitudinal grinding and plunge grinding, input for retraction, infeed increments, feeds, dwell times, clearance strokes, compatible with the old Karstens infeed control, with a color Siemens touch panel similar to Weiss/EMAG/GP cylindrical grinding machines/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat /Bahmüller/Fortuna

Condition: used, Year of construction: 1990, External/Internal Cylindrical Grinding TARDUGNO RIBON type MODULE 2A Between points: 1000 mm Centre height: 180 mm Workpiece holder spindle CM4 Maxi grinding diameter: Ø 360 mm Workpiece holder rotation: from 35 to 310 RPM Year of construction: 1990 Tilting table - 9° / + 6° Grinding wheel dimensions: Ø 406 mm x thickness 60 mm Scale on table X Spindle speed: 1500 - 1730 RPM Grindstone motor: 5,5 CV Hydraulic tailstock CM3 Auto wheel advance Internal grinding spindle: Max speed 20000 RPM Maxi boring: from 14 to 75 mm Lubricant tank+ paper filter Rjdpfx Amszn Ib Ne Tecd Diamond system Tilting grindstone holder trolley Supplied with grinding wheels + steadies Voltage: 380 V Dimensions (L x W x H): 3800 x 2000 x 2200 mm Weight: approx 3,2 T