Used Dalex Cgl 222 for sale (87)

Condition: refurbished (used), DALEX seam welding machine, transverse seam version Outreach: 350 mm Rated power: 160 kVA Secondary short-circuit current: 38.5 kA Secondary open-circuit voltage: 4.8-9.6 V Electrode force: 140-2,040 daN Kodpedx Suhofx Aqionb with 2-stage switch and auxiliary control unit with thyristor power stage and synchronous welding control MPS 100 multi IMPORTANT NOTE – PLEASE PAY ATTENTION The above-mentioned performance data comes from the machine's nameplate. During inspection of the machine, it was found that a 200 kVA welding transformer had been installed by the previous owner. This changes the performance data.

Condition: used, Dalex-Werke Pms 10-2 380V 50Hz Rated power at 50% duty cycle: 63 kVA Secondary short-circuit current: 45 kA Knodpeg Rcpxjfx Aqiob Rated primary voltage 380 V - 50 Hz Open-circuit voltage of 5.6 V Electrode force: 65-390 daN Machine weight: 341 kg

Condition: used, WIG welding machine, electric welding unit DALEX Type TGKW 55 (AC-DC) Serial No. 532521, Year of manufacture approx. 1975 Power: 225 Amps = 60% duty cycle 125 Amps = 100% duty cycle Setting range: 2.8 to 225 Amps Type of current: Direct current and alternating current (AC-DC) Mains connection: 380 Volts, 50 Hz - Power setting via 5 coarse stages and fine adjustment via rotary potentiometer, continuously adjustable - 2-cycle and 4-cycle welding system - Remote control with rotary potentiometer for fine adjustment - Digital display for amperage - WIG hose package, 4 meters - Welding gas pressure regulator - Water-cooled Space requirement L x W x H: 1050 x 610 x 890 mm Kedpfjdzqacjx Aqisnb Weight: 290 kg Good condition

Condition: used, Wig welding machine, DALEX, type GL/W 201 WIG welding machine Machine no.: 201, year of manufacture approx. 1995 Power: 200 amps, 35% duty cycle 160 amps, 60% duty cycle 120 amps, 100% duty cycle Adjustment range: stepless Knedpfx Aqsi E Izvsijb Type of current: DC - direct current Mains connection: 400 volts, 50 Hz, 5.9 kVA, 32 amp plug - 2-cycle and 4-cycle welding system - WIG hose set, 8 meters - HF ignition - Shielding gas pressure regulator - Electrode welding for coated electrodes - Fan cooling - Connection socket for foot switch (without foot switch) Space required L x W x H: 850 mm x 450 mm x 700 mm Weight: 90 kg The welding test yields very good results when welding stainless steel with direct current. Otherwise, the machine is in very good condition.

Condition: good (used), TIG welding machine -Nimak electrode unit Knedpfsb A H I Ssx Aqieb -Dalex converter -Hose package -ground cable

Year of construction: 1970, condition: used, Spot welding machine Kodpfek Tt Hfjx Aqisnb Manufacturer: Dalex Type: SF 16 Continuous power output: 16 kVA at 50% duty cycle.

Condition: used, Cooling unit, water-cooled condenser, DALEX Type DRF 2 Ksdpfx Aqjg D H Rueionb Machine No. 38913719, Year of manufacture 1989 Flow rate 0.35 m3/h Cooling capacity 1950 Watts Operating pressure 2 to 3 bar Refrigerant R 134a; unit was converted from R12 to R134a Operating overpressure 18 bar Pipe connection thread 3/4" Tank volume 600 x 400 x 350 mm = approx. 80 liters Mains connection 380 Volts, 50 Hz Space requirement L x W x H 900 x 800 x 1020 mm Weight 100 kg Good condition

Condition: used, Year of construction: 1960, Technical details: current capacity: 60 kVA throat: 680 mm arm distance: 115 / 415 mm pincer opening adjustable: 180 mm rated capacity: 60 kVA welding power: 71 kVA electrode capacity: 100 bis 600 daN voltage: 380 V / 50 Hz V air pressure: min./max.: 6 / 10 bar cooling water consumption: 12 l/min weight of the machine approx.: 685 + 200 kg connection voltage: 380 V / 91 A V rated capacity: 60 kVA connected load: 54 kVA dimension L-W-H: ca. Maschine: 1.700 x 850 x 1.750 mm dimension L-W-H: ca. Aggregat: 900 x 650 x 1000 mm POINT WELDING MACHINE - WELDING TRANSFORMER Direct current three-phase welding machine Application: Spot, projection and series spot welding Knsdpfx Aqou Nv Emjisb Maximum short-circuit power 89 kVA Primary short-circuit current 135 A Secondary current = short-circuit current: 25 kA and welding current max. 20 kA Electrode stroke max. 90 mm; electrode force min./max.: 100 daN / 600 daN Stroke sequence max. with 10 mm stroke 400 strokes/min. Spot fitting: electrode holder Ø 30 mm, adjustable 180 mm, arm distance = min./max.: 115 / 415 mm 2-fold foot switch Cooling unit, mobile = movable on wheels, connection power 1.45 kW, pipe connection R 3/4 inch, coolant R22 *

Condition: refurbished (used), pneumatically operated, water-cooled DALEX spot welding tongs in C-frame design with a 5/2-way solenoid valve Nominal power at 50% duty cycle: 22 kVA Secondary short-circuit current: 17 kA Electrode force: 360 daN Arm spacing: 100 mm with a single-acting cylinder and a feed stroke of 5-45 mm Knedpedykhujfx Aqieb complete with synchronous welding control, standard electrode arms C 34/2/95 S and AE 2/96 G and a universal joint suspension with a suspension bracket.

Condition: excellent (used), machine/vehicle number: 4220.515, range of control: 20 - 180 A welding circuit at 100% ED: 135 A Kjded Hn Ufjpfx Aqionb electrical connection: 380 V space needed: 650 x 550 x 850 mm weight: 118 kg

Condition: good (used), machine/vehicle number: 421272, range of control: 20 - 180 A welding circuit at 100% ED: 135 A Kodpec Ich Iefx Aqisnb electrical connection: 380 V, 5,5/8,5 kVA V space needed: 520 x 480 x 800 mm weight: 118 kg

Condition: good (used), Balancer, machine balancer -Type: D5-45 -Load capacity per piece: 30-45 kg -Rope length: 2 m Knodpfx Aecii N Ijqijb -Quantity: 2 pieces available -Price: per piece -Own weight: 18 kg