4
Technical data:
GLC 556-C
Entrance:
Rated input voltage 3x400V AC
Rated frequency 50Hz
(Other voltages and 60 Hz frequency are available on request)
Input - peak current 58A
Input - continuous current 38A
Slow fuse 50A
Power cable 4x10mm2
Input constant power 26.3 kVA
Power factor cos Phi 0.80
Output:
Max idle voltage 22-70V
Welding range for MIG / MAG 80A/18V-550A41.5V
Switch-on time 100% 425A/35V
Switch-on time 60% (10min.) 550A/41.5V
Type of protection IP 23
Cooling type F
Insulation class F ...
7
Serial No. 0303203
Input 415/3/50hz, Nominal power 18 kVA
Throat 200mm
Fitted with Sureweld cooling unit
Cnmojjpfs
Equipment Mount to Robotix Arm 800mm Travel
Length 900mm
Width 700mm
Height 2400mm
Nett weight actual. 310 Kgs. (0.31 Tons)
3
Fronius Transtig 3000
Water-cooled
300 Amps
380 Volt
2/4 stroke
Gas after power
Gas before power
High frequency start
Start current
End of current
Bi level
Digital display
Up slope
Down slope
Electrode option
Welding trolley
Including an 8-metre torch and ground cable.
With this machine you can weld steel and stainless steel.
Price €1950 ,- EX VAT
We specialize in selling new and used welding machines.
For example:
MIG / MAG, CO2, TIG, pulse, AC / DC, synergic, water cooled, electrode and p...
3
600 Grad max.
Capacity 220 Volt
Nnc22
weight of the machine ca. 0,2 t
5
Welding rectifier, electrode welding device, electrode welding machine, electrode welding rectifier, electrode furnace
-Electrode dryer with electrode basket
Bjcztz8yhu
-230 V 0.12 kW
-Interior 80/80 / H440 mm
-Dimensions 180/145 / H560 mm
-Weight 7.1 kg
1
current intensivity 400 A
open-circuit voltage 65-75 V
IP protection class IP21
Hdqlky2
Permissible load
at 35% duty cycle 400 A
at 60% duty cycle 315 A
at 100% duty cycle 250 A
Idle power 0.49 kW
Application class: S
- Water cooled
- With hand and foot remote control
- Incl. Hose package approx. 6000 mm
3
Control Unit
Brand Bystronic
0escnvrb
Main Drive
Laser power 4,4 kW
Laser type CO2
This Bystronic Byspeed 3015 Laser Cutting Machine was made in the year 2008. This machine has been on for 54550 hours, of which 42250 are cutting time. It is equipped with a control unit of the same brand. This machine can work with a laser power of 4,4 kW. It has a new turbine. This machine has been fully refurbished by Bystronic.
Application Types
Laser Cutting
4
current intensivity 400 A
length 1200 mm
height 1800 mm
total power requirement kW
Beomwfwhi3
weight of the machine ca. t
dimensions of the machine ca. m
4
Kemppi Fastmig KMS 400
Synergic
Water-cooled
400 Amps
380 Volt
4 roller driven
2/4 stroke
Soft start
Hot start
Digital display
Infinitely adjustable
Fixed progammes
Programme memory
Gas before power
Gas after flow
End of current
Electrode option
Including a 3-metre torch, 15-metre intermediate package and a ground cable.
With this machine you can weld steel & stainless steel.
Bq23bphuh8
Price €2650,- EX VAT
We specialize in selling new and used welding machines.
For example:
MIG / MAG, CO2...
4
current intensivity 300 A
Be7xsv8c3b
weight of the machine ca. 0,3 t
TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine
Ddl9clv
-Max. Welding power 350 A.
-Welding cable with electrode clamp
-Ground cable
-Price per piece
-Number of 2 pieces
-Dimensions 390/550 / H530 mm
-Weight 56 kg
2
current intensivity 24 / 27 A
output 16 / 18 kVA
Bensbrchlp
voltage 380 V
0,54
connected load 4 x 6 mm²/CU
35 A
weight of the machine ca. 235 kg
dimensions of the machine ca. 850 x 610 x 1050 m
6
Main Drive
Laser power 6 kW
Laser type CO2
Bku7ldyly2
This Bystronic ByAutonom 3015 Laser Cutting Machine was manufactured in the year 2014. This machine has been working for aproximately 22100 hours. It counts with a laser power of 6 kW. This machine has been fully refurbished by Bystronic.
Application Types
Laser Cutting
3
3 module plasma welder.
Main unit+plasma module+cooling water module.
Dlb0z8hzg
Without hose package and connections for it.
See photo.
For sale by customer order.
Further data on request.
4
Lorch Micor Mig 400
Water-cooled
400 ampere
380 Volt
4 Roller driven
2/4 stroke
Gas after power
Gas before power
Digital display
Spot welding setting
Down slope
Soft start
Steplessly adjustable
Back burning time adjustable
Vl7p2pl2
End current
Electrode option
Including 3 meter torch with adjustable power, 10 meter intermediate package, ground cable.
With this machine you can weld steel & stainless steel
Price €2850,- VAT not refundable.(marge)
We specialize in selling new and used welding...
5
length 1500 mm
height 2550 mm
Cbtwfvif
Control Amada
Thickness V2A 2 mm
Steel sheet steel 2,3 mm
sheet width - max. 700 mm
total power requirement 15 kVA
weight of the machine ca. 1,3 t
dimensions of the machine ca. 2x1x3 m
5
Inert gas welding machine, arc welding system, MIG / MAG welding system
-Max. Welding power 400 A.
-4-roller drive
-Water cooled
-Incl. Ground cable
-with removable wire feeder
-Gas valve
-Hose package
Biyllyg28c
-Dimensions 1000/450/H1050 mm
-Weight 208 kg
2
output 12,8 kVA
Bndxzwpm
F
Kl. F
IP 23
dimensions of the machine ca. 560 x 250 x 480 mm
4
TIG compact welding machine
Manufacturer: Messer Griesheim
Type: Uni TIG GW 30
Technical data:
Setting range A/V 10/10-300/22; 20/20-300/32
Open circuit voltage 100V
Welding current 60% ED 300 A, 100% ED 230 A
Nominal input voltage 415 V
Be3sks809b
Cooling type F
Insulation class F
Dimensions: 980x570x1125 mm (LxWxH)
weight 290 kg
tested 2018
2
TIG inverter for industrial use ideal for welding steel, stainless steel and copper sheets.
Especially suitable for thin material.
H2ms97d
For sale by customer order.
Further data on request.
3
Kemppi Fitweld 300
This Kemppi with its light weight of 14.5 kilos is ideal to take along on location.
300 Ampère
380 Volt
2/4 Stroke
Stepless
Including a 4 meter welding gun and mass cable.
With this machine you can weld steel and stainless steel.
Price €1250,- VAT not refundable.(marge)
We specialize in selling new and used welding machines.
For example:
MIG / MAG, CO2, TIG, pulse, AC / DC, synergic, water cooled, electrode and plasma.
And also other brands: Migatronic, Lincoln, Mil...
4
Input 400/3/50hz
Amperage range 280 - 400
Duty cycle 280A @ 100%, 365A @ 60%, 400A @ 50%
Equipment Murex Transmatic 4C wire feed, earth cable, gun
Length 830mm
Ortnt
Width 555mm
Height 930mm
Nett weight approx. 150 kgs
5
Inert gas welding machine, arc welding system, MIG / MAG welding system
Emgquy7wi
-Max. Welding power 400 A.
-4-roller drive
-Water cooled
-Incl. Ground cable
-with removable wire feeder
-Gas valve
-Hose package
-Dimensions 1000/450/H1050 mm
-Weight 208 kg
4
Machine type MIG/MAG welding machine
Make MERKLE
Type RedMIG 3000 K
Supply voltage 3 x 400 Volt
Adjustment range 25 - 280 amps
Duty cycle 35 % ED at 280 amps
60 % ED at 240 amps
Current setting 14 switching steps
Cooling transformer by built-in fan
Cooling burner gas cooled
Design mobile compact unit
Wire feed 4 roller drive DV 26
fuse protection 16 ampere
Dimensions L x W x H 910 x 460 x 760 mm
Weight 120 kg
Age 12 months
Condition very good, like new
Scope of delivery welding machine with...
5
current intensivity 30 x 200 A
Bm2myy8q
connected load frequency 3 x 400 V
material thickness max. 5 mm
Duty cycle at amperage 60 % / 200 A ED/A
Duty cycle at amperage 100 % / 175 A ED/A
weight of the machine ca. 290 kg
dimensions of the machine ca. 1048 x 630 x 855 m
AC / DC
cooling of
Transformer: by built-in fan
Burner: water-cooled
3
Length: mm
height: mm
welding current - continuous: A
welding current: 330A / 50% und 210A / 100%
protection class: IP 23
Bh7uxs9pc
total power requirement: 13,8 kVA
weight of the machine approx.: 71 kg
dimensions of machine: 0,95 x 0,60 x 0,90 m
- MIG / MAG / MIG and electrode
- cooling method water-cooled AF
- insulation class B
- power range 3A / 20V to 330A / 34V
Equipment:
- cooling unit
- wire feeder DS III (wire Ø 0,8 - 1,6mm) optinal possible!
4
Fronius Transsteel 3500C
Watercooled
Synergic
400 Ampere
380 Volt
4 Roller driven
2/4 stroke
Soft start
Hot start,
Gas after power
Gas before power
Digital display
Fixed programmes
Steplessly adjustable
Adjustable burnback time
7scx39w
Up slope
Down slope
Electrode option
Start current
End Current
Welding trolley
Including new 3-metre torch and ground cable.
With this machine you can weld steel and stainless steel.
Price €2850,- VAT not refundable.(marge)
We specialize in selling new a...
6
Amperage 359
Input 380/440/3/50hz
Duty cycle 350A o 60% 400A @ 45%
Duty cycle period 10 minutes
Fitted with Tecarc wire feed, Wilkinson chiller
Length 725mm
Width 500mm
Height 970mm
Cbkpxlrw
Nett weight approx. 220 kgs
4
Inert gas welder, protective gas device, wire feeder, coolant pump
Nzj8q8zz
-for water cooled gas welding machines
-230/400 V
-Output 0.12 kW
-Speed 2755 rpm
-Flow rate 12 l / min
-Dimensions 110/145 / H205 mm
-Weight 2.4 kg
4
Machine type MIG/MAG welding machine
Make MERKLE
Type RedMIG 2000 K
Supply voltage 3 x 400 Volt
Adjustment range 25 - 200 amps
Duty cycle 30 % ED at 200 amps
60 % ED at 140 amps
Current setting 7 switching steps
Cooling transformer by built-in fan
Cooling burner gas cooled
Design mobile compact unit
Wire feed 4 roller drive DV 26
fuse protection 16 ampere
Dimensions L x W x H 800 x 460 x 655 mm
Weight 70 kg
Special accessories 4-roller gear DV 26
Age 6 months
Condition very good, like new
Scope...
15
Control Unit
Brand Primach
Model 20 L
Main Drive
Laser power 2,5 kW
Media
Main electronic connection 400 V
This Prima Industrie Platino 1530HS Laser Cutting Machine was manufactured in the year 2002 in Italy. It is equipped with a Primach 20L control unit. This machine can operate with a laser power of 2,5 kW.
Zr7iuoy
Application Types
Laser Cutting
4
Length: mm
height: mm
welding current - continuous: A
welding current: 330A / 50% bis 210A / 100%
protection class: IP23
total power requirement: 13,8 kVA
weight of the machine approx.: 71 kg
dimensions of machine: 0,95 x 0,60 x 0,90 m
- MIG / MAG / MIG and electrode
- cooling method water-cooled AF
- insulation class B
- power range 3A / 20V to 330A / 34V
Equipment:
- cooling unit
- wire feeder DS III (wire Ø 0,8 - 1,6mm) optional possible!
Biegy9cs2g
4
Carl Cloos Quinto/Capo GLC 503
Pulse
Synergic
Water-cooled
500 Ampere
380 Volt
4 Roller driven
2/4 stroke
Digital display
Fixed programs
Steplessly adjustable
Adjustable burnback time
Electrode option
Including a 3-metre torch and a ground cable.
With this machine you can weld steel, stainless steel and aluminium.
Price €1650,- VAT not refundable.(marge)
Dmtal8q8g
We specialize in selling new and used welding machines.
For example:
MIG / MAG, CO2, TIG, pulse, AC / DC, synergic, water cooled...
5
Amperage 400
Input 400/3/50hz
Amperage range 30 - 400
Duty cycle Mig 400A @ 100% MMA 400A @ 80%
Weiding speed 1.5 - 18 m/min
Fitted with 4 roller wire feed, inching.
Bpz9wud2zq
Equipment Jasic wire feed unit, earth cable, wire gun
Length 595mm
Width 285mm
Height 470mm
Nett weight approx. 45 kgs
5
Inert gas welding machine, arc welding system, MIG / MAG welding system
-Manufacturer: Kemppi, RA550 inert gas welding machine, water-cooled
-Welding power: max. 550 A
-Wire feed: detachable, 4-roller drive type FU30
-incl .: earth cable, gas valve, hose package
-Dimensions: 1200/840 / H1535 mm
V0rl3er7
-Weight: 332 kg
3
8
General Data
Measurements width 10400 mm
Measurements depth 6500 mm
Measurements height 2450 mm
Machine weight 13000 kg
Dmunxum
Control Unit
Brand Bystronic
Main Drive
Laser power 4400 W
Laser type ByLaser 4400
Workpiece
Workpiece weight 750kg
Media
Main electronic connection 3x400V/50Hz
Power consumption 40 kVA
This Bystronic BySprint Pro 3015 laser cutting machine was manufactured in 2004. The machine has a total of 22412 production hours. It is operated through a Bystronic control unit. ...
5
Length: mm
height: mm
welding current - continuous: A
welding current: 330A / 60% und 250A / 100%
protection class: IP23
total power requirement: kVA
weight of the machine approx.: 71 kg
dimensions of machine: 0,95 x 0,6 x 0,9 m
- MIG / MAG / MIG and electrode
- cooling method water-cooled AF
- insulation class B
- power range 3A / 20V to 330A / 34V
Equipment:
- cooling unit
Bfucshkkxe
- wire feeder DS III (wire Ø 0,8 - 1,6mm) optional possible!
3
Kemppi Mastertig MLS 4000
Watercooled
400 Ampére
380 Volt
2/4 Stroke
Gas pre flow
Gas post flow
High frequencystart
Digital display
Up slope
Down slope
Stick option
Trolley
Including an 8 meter welding gun and mass cable.
We specialize in selling new and used welding machines.
For example:
MIG / MAG, CO2, TIG, pulse, AC / DC, synergic, water cooled, electrode and plasma.
C2g97k0s
And also other brands: Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Helvi, Lorch, Rehm, Selco, C...
2
Amperage range 70 - 400
Duty cycle 400A @ 60%
Equipment Tecarc F40 wire feed, Mig gun
Length 885mm
Halpf9
Width 720mm
Height 930mm
Nett weight approx. 200 kgs
5
Welding rectifier, electrode welding device, electrode welding machine, electrode welding rectifier, power sources
-Three-phase rectifiers for MMA DC welding
-Welding performance: max. 400 A
-Welding cable with electrode clamp
-Ground cable
-Weight: 180 kg
Ql0dkgaij
3
Machine type MIG/MAG welding machine
Make MERKLE
Type RedMIG 2000 K
Supply voltage 3 x 400 Volt
Adjustment range 25 - 200 amps
St7zfk
Duty cycle 30 % ED at 200 amps
60 % ED at 140 amps
Current setting 7 switching steps
Cooling transformer by built-in fan
Cooling burner gas cooled
Design mobile compact unit
Wire feed 2-roller drive
fuse protection 16 ampere
dimensions L x W x H 800 x 460 x 655 mm
Weight 70 kg
Age 12 months
Condition workshop tested, like new, incl. UVV test report
Scope of deliv...
3
1 used MIG/MAG welding machine
make Merkle
type 400 DW year 2019
technical data:
Supply voltage 3 x 400 Volt
Adjustment range 25 - 400 Ampere
Duty cycle 35 % ED at 400 amps
60 % ED at 310 amperes
100 % ED at 230 amperes
Current setting 14 switching steps
Cooling transformer by built-in fan
Osvzj
Cooling torch water-cooled
Design mobile industrial unit with separate DV-case
Wire feed 4-roller gear
DV 26 fuse protection 16 ampere
Dimensions L x W x H 940 x 445 x 1.040 mm
Weight 170 kg
Scope of del...
4
Length: mm
height: mm
welding current - continuous: A
Gfx2tdx
welding current: 0 - 250
protection class: P21
weight of the machine approx.: 221 kg
dimensions of machine: 1,0 x 0,8 x 0,8 m
-welding tongs with cable 5.000mm
-extension for welding tongs 10.000mm
-wired remote control 6.000mm
-ground cable with pliers
Device is in a proper, functional condition.
4
Carl Cloos GLC 353 MC3
Pulse
Synergic
Watercooled
350 Ampere
380 Volt
4 roll drive
2/4 Stroke
Bqgobmgqod
Spot welding
Gas pre flow
Gas post flow
Digital display
Soft-start
Hot-start
Stepless
Adjustable burn back time
Fixed programs
Upslope
Down slope
Starting current
Ending current
Stick option
Including a 4 meter welding gun and mass cable.
We specialize in selling new and used welding machines.
For example:
MIG / MAG, CO2, TIG, pulse, AC / DC, synergic, water cooled, electrode and plasma....
6
Current range (A) 30 - 400
Input 400/3/50hz
Mig Voltage range (V) 15 - 40
Duty cycle Mig 400A @ 100% MMA 400A @ 80%
Yczbk
Welding speed 1.5 - 18 m/min
Equipment Jasic Wire feed, Earth cable
Features 4 roller wire feed,Inching
Length 595mm
Width 285mm
Height 470mm
Nett weight approx. 45 kgs
5
Inert gas welding device, inert gas device
Coxnlci
-Max. Welding power: 260 A.
-2 roller drive
-Air cooled
-Incl. Ground cable
-with removable wire feeder
-Intermediate hose package: 2 m
-Gas valve
-Hose package: 2.5 m
-Dimensions: 1000/460/H1340 mm
-Weight: 148 kg
3
Machine type MIG/MAG welding machine
Make Merkle
Type RedMIG 1600 K
Supply voltage 1 x 230 Volt
Adjustment range 25 - 160 amps
Duty cycle 30 % ED at 160 amps
60 % ED at 130 amps
Current setting 7 switching steps
Cooling transformer by built-in fan
Cooling burner gas cooled
Design mobile compact unit
Wire feed 2-roller drive
fuse protection 16 ampere
dimensions L x W x H 800 x 460 x 620 mm
Weight 65 kg
Age 12 months
Condition workshop tested, like new, incl. UVV test report
Scope of delivery wel...