Used Dc Servo Controller for sale (49,123)

Condition: ready for operation (used), Fanuc A06B-0642-B211 DC servo motor, mounting hole spacing: 102 x 102 mm, drive shaft diameter: 14 - 16 mm (tapered), used, shows normal signs of wear, 100% functional. Bedpsi D H I Ajfx Aiwjww

Condition: used, Drive motor, DC servo motor LENZE type GFQBT 80-24 Spindle motor, electric motor, main spindle motor Serial no. 184592 Year of construction: 1993 Rated power: 4.2 kW Operating voltage: 260 V DC Rated current: 20 amps Maximum speed: 3000 rpm Excitation voltage: 200 V DC Excitation current: 1.15 amps Bwodpjtpkx Njfx Aiwjw - Electric brake Shaft diameter: 24 mm (shaft with 8 mm feather key) Shaft length: approx. 47 mm (shaft protrusion from centering edge) Centering flange diameter: 110 mm Bolt circle diameter: 130 mm, 8 x M8 thread - Encoder, speedometer, GBR 190V Longlife speedometer HÜBNER type TDP 0.2 LT-4 Speedometer voltage: 60V / 1000 rpm Output current: 67 mA (max. 200 mA) Speed max. 9000 rpm External fan LENZE (EBM) type G2E 120 Mains connection: 230 V, 50 Hz, 0.32 A, 0.075 kW Overall length: 630 mm (without shaft and centering flange) Overall dimensions L x W x H: 690 x 340 x 430 mm Weight: 45 kg good condition

Condition: used, Permanent magnet DC servo motor SIEMENS Type: 1 HU3074-0AC01-Z NO.B J157 1047 01 008 Voltage = 167 Volt DC = direct voltage Power = 1.8 kW Current consumption = 12.5 amps Bwedpfjuch N Ijx Aiwow Speed = n. max.: 2000 rpm Rated torque = Mo 7 Nm Shaft diameter 24 mm Stub shaft length 50 mm Centering diameter 130 mm Bolt circle diameter 165 mm / 4 x 11 mm holes - Shaft with 8 mm keyway Housing dimensions L/W/H 335 x 140 x 145 mm Weight: 23 kg good condition

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, machine/vehicle number: BN2222, Demag chain hoist crane lifting mechanism 3200 kg DC-Pro 16-3200 H8 V4/1 Load capacity 3200 kg / 3.2 t, lifting capacity – 2-strand with trolley drive (beam width approx. 25-33 cm) with 2 lifting speeds, lifting height approx. 8 m!!! incl. control valve block Total weight approx. 160 kg, connection to 400 V 50 Hz Very good condition, hardly used Bwjdpfx Aiezhtfmewjw Item location is 75053 Gondelsheim See pictures

Condition: ready for operation (used), Fanuc A06B-0613-B031(?) DC servo motor, mounting hole spacing: 130 x 130 mm, drive shaft diameter: 9 - 16 mm (tapered), used, significant signs of wear, 100% functional. Bwsdpfx Aioi D H Iuewow

Condition: used, Permanent magnet DC servomotor INDRAMAT from MAHO milling machine Type: MDC 10.10H / MMA-0 (MDC10.10H/MMA-0) Serial No. 12423 Component No. 230837 K-M = 0.30 Nm/A Ieff = 11 A Imax. = 75 A Umax. = 170 V n max = Maximum speed = 3000 rpm Tacho: 0.317 Vs/rad Shaft diameter: 22 mm Shaft length: approx. 21 mm (shaft extension from centering edge) Centering diameter: 70 mm, 7 mm height Bolt circle diameter: 92 mm, 4x M8 mounting screws Overall length: 270 mm (without shaft) Housing diameter: 133 mm Weight: approx. 20 kg Good condition Bodjznn H Espfx Aiwoww

Condition: ready for operation (used), Indramat DDS 3.1-W030-D digital AC controller, shows normal signs of wear, 100% functional. Bwsdpsi Ebf Asfx Aiwew

Condition: good (used), Year of construction: 2013, DC Norris 2700 Industrial Wok Serial: 2827 2013, Stainless, 150L capacity, tilting, HMI Touch screen controls, tilting for discharge, comes with a thermal oil heater for the jacket, 3Ph Bwjdsw Ulbbopfx Aiwew

Condition: ready for operation (used), Indramat MDC10.20F/MMA-0 DC servo motor SN: 11444 - connector plug damaged, no influence on function ,used, strong signs of wear, 100% functional, scope of delivery as per photos Bwsdpfjrw Tk Hjx Aiwow

Condition: ready for operation (used), Indramat CLM 01.3-X-0-4-0 servo controller, without display and hardware module, serial number as shown in the photo, used, minimal signs of wear, 100% functional, scope of delivery as shown in the photos. Bodoi Ebbujpfx Aiwjww

Condition: ready for operation (used), Indramat CLM 01.3-X-0-4-0 servo controller without display and hardware module, serial number as shown in the photo, used, minimal signs of wear, 100% functional, scope of delivery as shown in the photos. Bwsdpfx Aisi Ebbqowjw

Condition: ready for operation (used), Fanuc A16B-3200-0071 / 03A800869 servo controller, used, with normal signs of wear, 100% functional. Bwodpfx Asi D U Ecoiwjw

Condition: used, METTLER TOLEDO AutoChem Fluid Control Module / Fluid Handling Module Mettler Toledo AutoChem FCM Fluid Control Module with integrated FCM-1200 Modifier Fluid Pump For sale is a used AutoChem Fluid Control Module from the manufacturer Mettler Toledo. The device is intended for use in corresponding AutoChem systems as well as for laboratory, reaction, dosing, and fluid handling applications. Technical data: Manufacturer: Mettler Toledo Model: FCM Part Number: 16000903 Device type: AutoChem Fluid Control Module Power connection: 220 VAC Power frequency: 50 / 60 Hz Fuse: 4 A Time Delay Dimensions: approx. 450 × 650 × 550 mm (W × D × H) Weight: approx. 50 kg Integrated pump: Mettler Toledo FCM-1200 Modifier Fluid Pump Part Number: 16001176 Interfaces: 2 × REMOTE 1 × GPIB Fluid connections on the front and rear Front connections: INLET OUTLET Bwjdpfx Aiozt Nzhowew Status indicators POWER ON and NOT READY Equipment: FCM-1200 Modifier Fluid Pump Integrated fluid lines Fluid fittings and valves INLET and OUTLET connections REMOTE interfaces GPIB interface Status indicators IEC power connection Metal housing with service panel Accessories as shown in the pictures Application areas: Mettler Toledo AutoChem systems Laboratory automation Reaction systems Fluid handling Dosing applications Process automation Research and development Scope of supply: 1 × Mettler Toledo AutoChem FCM Fluid Control Module Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures Nameplate present The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping via freight forwarder is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Benhil Stand Alone Butter Hopper with temperature control outlet with warm water circulation. This machine is used for handling butter or feeding machines with direct feed competitions units. This has twin screw augers with in the hopper and on the outlet there are connections for hot/warm water circulation would you need to regulate the temperature of the product. The throughput is at 2000 kg per hour . The hopper is capable of receiving 25 kg blocks of butter at 8-10 degrees . Capacity: 2000 kg/hr Conditions of sale: “As is” or “Refurbished “ Hopper: Twin Screw Bodpfx Aijz Imn Sjwoww Drive: Self driven by motor and belt with reducer Outlet: Double jacket outlet for temperature Control Location: In stock

Condition: used, 80 Control Units Bjdpfx Aszvhnfeiweww Electronics / PLC Controls Manufacturer: FESTO Type: CPX-CEC-C1 Condition: Good used condition. Fully functional prior to removal. Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: used, Brüel & Kjær LDS Dactron Shaker Control System / Vibration Testing Controller LDS Dactron LASER USB LAS 200 Controller for electrodynamic vibration testing systems For sale is a used Shaker Control System from the manufacturer Brüel & Kjær LDS Dactron. The system is suitable for controlling electrodynamic shaker systems for vibration, resonance, random, and shock tests in research, development, and quality assurance. Technical data: Manufacturer: Brüel & Kjær LDS Dactron Type: LASER USB Model: LAS 200 Device type: Shaker Control System / Vibration Testing Controller Country of manufacture: Made in U.S.A. Mains connection: 100–240 V AC Mains frequency: 47–63 Hz Power consumption: 1 A Analog inputs: 8 × BNC Outputs: 2 × (Drive / COLA) USB interface Digital I/O Master/Slave interfaces Emergency stop connection Calibration: Calibrated: 09/12/2023 Due: 09/11/2024 Dimensions: approx. 430 × 350 × 90 mm (W × D × H) Weight: approx. 6–8 kg Bwodpfx Aiozrtylewsw Equipment: USB license dongle Power cable 8 measurement inputs USB interface Digital I/O Documentation as shown in the pictures Application areas: Vibration testing Oscillation testing Random tests Resonance tests Shock tests Endurance tests Test rig control Scope of delivery: 1 × LDS Dactron LASER USB LAS 200 Shaker Control System USB license dongle Power cable Documentation as shown in the pictures Condition: Used Optical condition as shown in the pictures Calibration sticker present Important note: The license keys visible in the documents have been obscured for data protection and security reasons. The table shown in the photos, as well as any other items not explicitly mentioned, are not part of the sale. Shipping possible. Subject to changes, errors, and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, Weiss   Type: WK3-340/70   Weiss Climate Testing Chamber, Air-Cooled   Control Panel »Touch Panel« All control and operating commands can be initiated by simply touching the function symbols on the »Touch Panel« control panel.   Adjustable Feet To compensate for uneven floors and ensure sufficient ventilation of the machine section, the testing chamber is equipped with adjustable feet.   Feedthroughs The testing chamber is equipped with feedthroughs on the right and left sides. These allow measuring cables and testing equipment to be routed into the test chamber.   Feedthrough installed as standard R1: 125 mm L1: 85 mm   Volume: 335 liters   Test chamber dimensions:   Test chamber dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm   Data for temperature tests:   Minimum temperature -72°C Maximum temperature +180°C   Temperature deviation, over time ± 0.1 to ± 0.5 K Temperature homogeneity, spatially ± 0.5 to ± 1.5 K   Temperature change rate, cooling 3 K/min Temperature change rate, heating 3 K/min   Data for climate tests: Bwedpfxoziiwuo Aiwow   Temperature range +10°C to +95°C Dew point range -3°C to +94°C Humidity range 10 to 98% RH   Temperature deviation, over time ± 0.1 to ± 0.3 K Temperature homogeneity, spatially ± 0.5 to ± 1 K Humidity deviation, over time ± 1 to ± 3% RH   Data for operation:   Test chamber lighting: Halogen bulb 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 16 A Rated power 4.9 kW Fuse, to be provided by the customer: 16 A slow-blow   Refrigerant: R-452A/R23   Weight Approx. 585 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data, specifications are subject to change!)   We will be happy to answer any further questions you may have over the phone.

Condition: used, Vötsch Type: VCS³ 7034-5 Vötsch Climate Testing Chamber, Water-Cooled With a temperature change rate of 5 K/min Data for temperature testing: Temperature range: -70°C to +180°C Temporal temperature deviation in the center of the usable space: ± 0.1 K to ± 0.5 K Spatial temperature deviation: ± 0.5 K to ± 2.0 K Temperature change rate: Heating: 6.8 K/min Cooling: 6.7 K/min Data for climate testing: Temperature range: +10°C to +95°C Temporal temperature deviation in the center of the usable space: ± 0.1 K to ± 0.3 K Spatial temperature deviation: ± 0.5 K to ± 1.0 K Temporal humidity deviation in the center of the usable space: ± 1% to ± 3% RH Humidity range: 10% to 98% RH (extended climate range: 2°C/95% RH, regulated for a maximum of 2 hours) External dimensions: Width 870 x Depth 1700 x Height 1775 (mm) Test chamber dimensions: Width 580 x Depth 765 x Height 750 (mm) Test chamber volume: approx. 335 liters Side opening: 50 mm Side opening: 125 mm Data for operation: LED strip 24 V, 6.8 W / 2 x halogen bulb 24 V, 50 W Rated voltage: 3/N/PE AC 400 V ±10 %, 50 Hz Rated power: 9 kW, Rated current: 20 A Fuse, on customer's side: 63 A slow-blow Refrigerant: R404A/R-23 Weight: approx. 570 kg For your safety as a buyer, please note the following information! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) Bsdoziyx Nopfx Aiweww We will be happy to answer any further questions you may have by telephone.

Condition: used, TDK-Lambda Type: GEN10-240 TDK-Lambda GEN10-240 | Power supply, DC, 1 channel, 2U, 10V/240A, 2,400W, RS232, RS485 in a 19-inch housing Technical data: Manufacturer: TDK-LAMBDA Power supply type: Programmable laboratory power supply Display type: LED x2 Number of channels: 1 Output voltage: 0...10V DC Output current: 0...240A Max. power: 2.4 kW Mounting: 19" rack Output voltage resolution: 1.2 mV Output current resolution: 28.8 mA Bjdpjzg Exvsfx Aiwjww Ripple and noise (regulated): ≤8 Vrms, ≤60 Vpp Input connector type: Terminal block Manufacturer series: GEN Operating temperature: 0...50°C Dimensions (width x height x depth): 423x43.6x432.8 mm Parameter display: 4 digits Software: LabVIEW Documents & Downloads Data sheet: Operating manual Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Vötsch   Type: VCS³ 7027-10   Vötsch climate testing chamber, water-cooled With a temperature change rate of 10 K/min   Data for temperature testing: Temperature range: -72°C to +180°C Temporal temperature deviation in the center of the usable space: ± 0.3 K to ± 0.5 K Spatial temperature deviation: ± 0.5 K to ± 2.0 K   Temperature change rate Heating: 10 K/min Bsdpfx Aiezh Huuewsww Cooling: 14.5 K/min   Data for climate testing: Temperature range: +10°C to +95°C (extended climate range: 2°C/95% RH, regulated for a maximum of 2 hours) Temporal temperature deviation in the center of the usable space: ± 0.2 K to ± 0.3 K Spatial temperature deviation: ± 0.5 K to ± 1.0 K Temporal humidity deviation in the center of the usable space: ± 1% to ± 3% RH Humidity range: 10% to 98% RH (extended climate range: 2°C/95% RH, regulated for a maximum of 2 hours)   External dimensions: Width 780 x Depth 1895 x Height 1775 (mm) Test chamber dimensions: Width 580 x Depth 615 x Height 750 (mm) Test chamber volume: approx. 270 liters   Side opening: 50 mm Side opening: 125 mm   Data for operation: LED strip 24 V, 6.8 W / 2 x halogen bulb 24 V, 50 W Rated voltage: 3/N/PE AC 400 V ± 10%, 50 Hz Rated power: 14 kW Rated current: 26 A Fuse, on customer’s side: 63 A, slow-blow   Refrigerant: R404A/R-23   Weight approx. 835 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of supply: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have by phone.

Condition: new, Year of construction: 2018, operating hours: 7 h, ABB IRB6700-205/2.80 + IRC5 controller + TPU DEVELOPMENT OF GSG ROBOTICS Bsdez Taczopfx Aiwsww GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, serving a large area for robot maintenance and repair. Over the years, we have evolved into a comprehensive partner for all aspects of industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.

Condition: excellent (used), 3HAC025338-002 Main Servo Drive Unit, DSQC 617 D6_2E2C2B, 20% discount when ordering more than 1 unit. DEVELOPMENT OF GSG ROBOTICS Bedpfxez Tac Is Aiwjww GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, with a large service area for robot maintenance and repair. Over the years, we have developed into a comprehensive partner for all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.

Condition: excellent (used), Year of construction: 2022, operating hours: 50 h, ABB Multimove 2*IRB1200-5/0.9 + IRC5 Multimove controller + TPU, as new DEVELOPMENT OF GSG ROBOTICS Bwodsz Tadlepfx Aiwow GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, providing comprehensive service for robot maintenance and repair. Over the years, we have developed into a holistic partner for all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.

Condition: excellent (used), Year of construction: 2013, ABB IRC5 Controller, 20% discount when ordering more than one unit. DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, with a large service area for robot maintenance and repair. Over the years, we have developed into a comprehensive partner for all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc. Bodpfoz Tafcox Aiwjww

Condition: excellent (used), Year of construction: 2020, operating hours: 200 h, ABB IRB360 Picker + IRC5 Compact controller, 2nd generation + TPU, as new DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015 and offers a comprehensive service area for robot maintenance and repair. Over the years, we have evolved into a holistic partner for all matters related to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc. Bedpfjz Taggox Aiwoww