Used Ddr Charger for sale (2,173)

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 516367X00016, Year of construction: 2020, operating hours: 11,276 h, load capacity: 3,500 kg, lifting height: 5,950 mm, load center: 600 mm, mast type: duplex, battery voltage: 80 V, fork length: 1,200 mm, TECHNICAL DETAILS Gedpfx Ao Ah Rczskhskd Load capacity: 3,500 kg Lifting height: 5,950 mm Overall height: 2,800 mm Fork length: 1,200 mm Load center: 600 mm MACHINE DETAILS Mast type: Duplex mast Front work lights: 3 units Rear work lights: 6 units Total weight: 4,752 kg Overall height: 2,800 mm Operating hours: 11,276 h EQUIPMENT Duplex mast Double auxiliary hydraulics Full cabin with heater Battery with charger Blue Spot Work lights, front and rear Windshield wipers, front, rear, and top Radio

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, shelf height: 7,200 mm, load capacity per storage section: 2,000 kg, TECHNICAL DETAILS General Information Manufacturer: BÖCKELT Model: TOWER Year of Construction: 2017 Racking System Number of Racking Bays: 41 Racking Height: 7.20 m Maximum Bay Load: 38 t Maximum Load per Level: 2,000 kg Shelves and Storage Dimensions Shelf External Dimensions: 3,340 × 1,600 × 90 mm Additional Loading Height: 60 mm or 160 mm Drawer Internal Dimensions: for panel format 3,000 × 1,500 mm Maximum Weight of Loaded Shelf: 2,300 kg Automated Narrow Aisle Trucks Gedpfx Akj Aay Dwehekd Number: 2 Manufacturer/Model: MLR Mayesto 2.3 Design: Automated narrow aisle trucks with reinforced lifting mast Load Capacity per Vehicle: 2,300 kg up to 4,500 mm lifting height Residual Load Capacity per Vehicle: 2,000 kg up to 7,500 mm lifting height Truck Load Capacity: 2,000 kg at 7,500 mm lifting height per vehicle Travel Speeds Forward/Reverse Travel: max. 1.6 m/s Curve Travel: 0.3 m/s Positioning Travel: 0.1 m/s Battery and Charging Technology Battery Voltage: 80 V Battery Capacity: 930 Ah Charger: on-board Automatic Recharge: via sliding conductors in 3 horizontal aisles Safety and Detection Technology Laser Scanner: SICK, front and rear Software and Control System Control System: MLR LogOS-FTS Operation: fully automatic Visualization: graphic and tabular EQUIPMENT Complete software for fully automatic system operation 41 racking bays 2 automated MLR Mayesto 2.3 narrow aisle trucks Reinforced lifting masts Telescopic forks that can extend on both sides Multi-level telescopic table SICK laser scanners, front and rear On-board charger Automatic recharge via sliding conductors Shelves with aluminum panels Transport order management Vehicle dispatch Storage location management User management Error and signal management Statistics Energy monitoring

Condition: used, machine/vehicle number: F20179V00622, Year of construction: 2019, operating hours: 7,794 h, load capacity: 2,000 kg, lifting height: 150 mm, fork length: 1,150 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 150 mm Fork length: 1,150 mm MACHINE DETAILS Battery voltage: 24 V Battery capacity: 250 Ah Measured idle voltage: 25.4 V Dimensions & Weight Dimensions (L x W x H): 2,000 x 800 x 1,400 mm Dead weight: 800 kg UVV certification valid until: 09/2027 Service valid until: 09/2027 Operating hours: 7,794 h EQUIPMENT Battery charger Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Gjde Ahrglspfx Akhskd Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 340

Condition: used, machine/vehicle number: 516223V00900, Year of construction: 2019, operating hours: 4,777 h, load capacity: 1,800 kg, lifting height: 4,500 mm, mast type: triplex, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Gkedpfx As Ahrcaokhsd Load capacity: 1,800 kg Lifting height: 4,500 mm MACHINE DETAILS Mast design: Triplex mast with full free lift Drive type: Electric Battery year of manufacture: 2019 Battery voltage: 48 V Battery capacity: 625 Ah Measured idle voltage: 50.83 V Dimensions & Weight Dimensions (L x W x H): 3,000 x 1,150 x 2,060 mm Own weight: 3,400 kg Service valid until: 10/2027 UVV inspection valid until: 10/2027 Operating hours: 4,777 h EQUIPMENT Former Still full-service unit Battery charger Fork positioner with side shift Side fall protection LED work light at the rear Orange warning light Comfort seat with lumbar support Seat heating Hydraulic valves: 3rd and 4th valve Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is done at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior registration is possible from Monday to Friday between 07:00 and 16:00. If collection is not done on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 219

Condition: used, machine/vehicle number: P21173V00135, Year of construction: 2019, operating hours: 4,538 h, load capacity: 1,600 kg, lifting height: 2,844 mm, fork length: 1,150 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 1,600 kg Lifting height: 2,844 mm Fork length: 1,150 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,200 x 800 x 1,915 mm Weight: 1,300 kg Battery voltage: 24 V Battery capacity: 375 Ah Battery year of manufacture: 2019 Battery voltage at rest: 24.8 V Operating hours: 4,538 h EQUIPMENT Initial lift Integrated scale Battery charger Previously a Linde full-service unit All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible for truck heights of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. Gsdpfxe Ahrd He Akhjkd If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 316

Condition: used, machine/vehicle number: 6780216, Year of construction: 2020, operating hours: 1,288 h, load capacity: 2,000 kg, lifting height: 1,500 mm, Equipment: UVV, No minimum price – guaranteed sale to the highest bidder! Gkedpfx As Ahrgwekhod TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 1,500 mm MACHINE DETAILS Battery voltage: 24 V Battery capacity: 300 Ah Battery voltage in idle mode: 25 V Dimensions & Weight Dimensions (L x W x H): 2,000 x 800 x 850 mm Weight: 850 kg UVV certification valid until: 09/2027 Service valid until: 09/2027 Operating hours: 1,288 h EQUIPMENT Folding platform Battery charger All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receipt of payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 358

Condition: used, Year of construction: 2022, operating hours: 322 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 2,000 kg Lifting height: 6,300 mm MACHINE DETAILS Mast: Triplex mast with full free lift Battery voltage: 48 V Battery capacity: 620 Ah Battery voltage at rest: 49.7 V Dimensions & Weight Dimensions (L x W x H): 2,700 x 2,070 x 2,840 mm Weight: 4,500 kg Service valid until: 10/2027 UVV (occupational safety) valid until: 10/2027 Operating hours: 322 h EQUIPMENT Former Still full-service unit Fork positioner with side shifter Dual tires on the front White, non-marking tires Comfort seat Charger Hydraulics: 3rd and 4th valve All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible for truck heights of 100–150 cm, up to 15 tons and up to a width of 230 cm. Gkjdj Ahwg Djpfx Akhed Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If the machine is not collected on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 224

Condition: excellent (used), For sale: robust BT2 bench drill of industrial manufacture – a classic, very durable design from the era of the former GDR (East Germany). ✅ Condition: ✔️ Used ✔️ Fully operational ✔️ Shows normal signs of use (scuffs, scratches – visible in the photos) ✔️ Complete machine 🔩 Technical specifications: Model: BT2 Power supply: 380V / 3 phase / 50 Hz Power: approx. 1.1 kW Manufacturer: VEB Werkzeugmaschinenfabrik Saalfeld (GDR) Weight: approx. 180 kg Speed adjustment + manual feed ⚙️ Features: Very robust, heavy construction Stable operation – ideal for workshop and production use Easy to operate and service Exceptionally durable "workhorse" machine 📦 Included: ✔️ BT2 bench drill ✔️ Worktable ✔️ Drill chuck 🌍 Country of origin: 🇩🇪 Germany (East Germany) ℹ️ Additional information: On-site inspection available Gjdpfx Asz Smpmokhjkd Perfect for workshop, metalworking, or production Transport possible (pallet / shipment)

Condition: good (used), Year of construction: 1987, functionality: fully functional, tank capacity: 50,000 l, total height: 10,000 mm, outer diameter: 2,800 mm, overall weight: 10,200 kg, wall thickness: 15 mm, manhole location: side, operating temperature: 60 °C, operating pressure: 12 bar, 3 compressed air tanks are available. !! Price per unit, net !! Gkedez Ahqaepfx Akhed Capacity: 50,000 liters (50 m³) Diameter: 2.8 m Height: 10.0 m Empty weight: 10,200 kg Wall thickness: 15 mm Operating pressure: 12 bar Test pressure: 16.3 bar Year of manufacture: 1987 The internal condition is very good, and they could continue to be used as compressed air tanks. Tank documentation is also available. We will handle the dismantling and loading. Transport can be arranged. The stated selling price is net and per unit !!

Condition: used, This listing is for the Eppendorf Charger Shell 2 Pipette Holder - E3116.000.05 SINGLE The unit is in full working condition and is ready for immediate use General Description Keep all your Eppendorf pipettes within easy reach and save valuable bench space. The Eppendorf Pipette Holder System offers highly flexible storage options to meet different lab needs. With upright positioning, pipettes are stored in a way that ensures their nose cones do not touch the bench surface, minimizing the risk of damage or cross-contamination. Features and Benefits Gjdpfjxv Dixsx Akhokd Large rubber feet protect the base from liquid spills and enhance stability. Clear pictograms on all charger shells and pipette holders ensure accurate assignment and easy recognition in a busy lab environment.

Condition: used, This listing is for a Hirschman pipetus with charger station The unit is in full working condition and is ready for immediate release Gedsxv Dznopfx Akhjkd For all pipetting from 0.1 ml to 200 ml Key Features: Wide Volume Range: Compatible with all measuring, volumetric, and Pasteur pipettes from 0.1 ml to 200 ml Precision Dispensing: Fine dispensing valves with ceramic compound valve pins offer maximum chemical resistance and zero wear Adjustable Speeds: Five finely tuned performance stages allow for exact and continuously variable pumping and suction speeds for both filling and venting Ergonomic Design: Crafted for non-fatiguing, long-term use Low Noise Operation: Pump motor operates quietly and without vibration Clear Display: Integrated colour display shows pipetting mode, speed level, and battery status Advanced Charging System: NiMH rechargeable battery Inductive, contact-free charging Microprocessor-controlled charge cycle Included Accessories: Inductive charging and park station Standard wall bracket Reliable Sealing: Tight silicone adapter seals all pipettes securely PTFE Filter Protection: Built-in hydrophobic PTFE diaphragm filter (0.2 µm pore size) prevents contamination.

Condition: used, This listing is for the Churwell PBI air sampler SAS Super with case and charger The unit is in full working condition and is ready for immediate use Churwell PBI Air Sampler SAS Super 100 L with Case and Charger The Churwell PBI Air Sampler SAS Super 100 is a widely used microbiological air sampling device designed for cleanrooms, pharmaceutical environments, operating theatres, and laboratories. It enables reliable air monitoring by collecting air-borne microorganisms onto contact plates or Petri dishes. Key Features: Godpfxsxv Dpxj Akhjkd Sampling Principle: Designed to collect airborne microorganisms on microbiological agar by impaction, produced through controlled air aspiration. High Sampling Efficiency: The SAS Super models—such as the SAS Super 100 and SAS Super 180—can collect particles down to 1 micron. The SAS Super 100 offers a sampling rate of 100 liters of air per minute. Digital Control: Features a digital interface for setting sampling volume, duration, and storing operator information. Battery-Powered: Equipped with a rechargeable battery, allowing for multiple sampling sessions on a single charge. Comes with a charger included. Portability: Lightweight and easy to carry with a protective case, ideal for field use or portable cleanroom monitoring. Technical Specifications: Air Flow Rate: 100 liters per minute Dimensions: 10.5 × 11 × 29 cm Weight: 1.75 kg Data Management: Some models support data logging and CFR 21 Part 11 compliance (varies by version) Materials: Typically stainless steel or autoclavable materials for sterile environments Accessories and Options: Aspirating heads (stainless steel or disposable) Tripods and stands Calibration adapters USB data cable (for models with digital logging)

Year of construction: 2007, condition: good (used), fuel type: electric, Golf car CLUBCAR PRECEDENT, 4-seater golf cart, 2007, with charger. A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition, without guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call beforehand, as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 Gkodpsz Rvfyjfx Akhsd 5391 LR Nuland

Year of construction: 2004, condition: good (used), Golf car CLUBCAR PRECEDENT, 2-seater golf cart, 2004, with charger, blue. A video can be sent via WhatsApp. We have a continuous supply; please see our website. Prices are quoted ex works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition, without warranties (see our general terms and conditions). Gkodpozz Sbgsfx Akhed You can make a non-binding appointment for a viewing and/or test drive. Please call in advance as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: K3499, total length: 2,100 mm, total width: 1,300 mm, total height: 1,580 mm, The 2011 Syspal Tote Bin Tipper is an efficient solution for safely and easily tipping heavy loads. Designed by Syspal, this equipment is ideal for industries that require frequent handling of tote bins. Its robust construction ensures durability and reliability in demanding environments. This used model features a straightforward design that facilitates easy operation and maintenance. It is specifically engineered to enhance productivity while maintaining high safety standards. The tipper is suitable for various bin sizes, making it a flexible choice for different applications. Godpfx Akj Ahq Ngohskd Given its design and build, the Syspal Tote Bin Tipper remains an excellent choice for businesses looking to improve efficiency in their material handling processes. Its compact size allows it to be integrated seamlessly into existing workflows, providing a cost-effective solution that doesn't compromise on performance. CHARGER NOT INCLUDED

Condition: new, Vehicle Charging Computer VAS 5908 Battery Charger Charging computer for vehicle starter batteries (lead-acid, gel, AGM, fleece batteries) VAS 5908 battery charger / external power supply with MPC4 control board and nominal 14VDC charging voltage (suitable for 12VDC vehicle electrical systems / batteries) - 100% compatible with vehicle electrical systems, protects vehicle electronics / airbag - Can be used as a charger, external power supply, and for supplying power to the vehicle in buffer mode (support during diagnostics / programming) - Extensive protection and self-protection functions - Short-circuit and reverse polarity protection - Protection function in case of battery defects - Safe spark suppression - User-friendly menu navigation / charging parameters can be configured - Built-in communication interface - Sealed housing, protected against internal contamination Housing version 'B': advantageous for industrial production lines - Status display via display and high-power LEDs - Menu navigation: German, English, French, Italian, Spanish - Extensive accessories, e.g. external status indicator (DBL-SIG-LR remote indicator), power / charging cable, wall mounting device, etc. - Option: Customer-specific charging parameters - Option: Low-temperature operation down to -40°C - Option: Battery diagnostic system - Option: Regeneration charging for deeply discharged batteries - Electrical safety - certifications: EN60335, EN60950, UL60950-1, UL1236, CSA C22.2 No.60950-1-07 Used by leading automotive manufacturers Input voltage 100-240VAC wide range (tolerance: 85VAC-265VAC), 45-65Hz 130-350VDC; CAUTION: For use in combination with inductive power transfer, use special firmware! Inrush current / 30A at 264VAC, temperature-independent Automatic fuse: 16A slow-blow (e.g. characteristic B) Power consumption at full load / 0.98 - No-load power consumption / 10W, disabled at the output - Input fuse / F1 (2x 7A-8A T)/250V (6.3x32mm) - Transient overvoltage protection / Varistor (8kA / 151J) - Input connection / IEC/EN 60320, C14 - Weight: 8.2 kg You can find more new and used items in our shop! International shipping costs on request! Gsdpfx Ajv Hptzokhokd

Condition: new, Thread rolling dies for various rolling machines, including UPW, UPWS, P10, P60, and ORT, with bores of 28 mm, 54 mm, 63 mm, 69 mm, 85 mm, 80 mm, 100 mm, and 110 mm. The dies can be ground to the desired thread profile. Godpfx Aszfybcokhekd A list of available dies can be found in the image gallery. Price in EUR per set (2 pieces).

Condition: used, This listing is for a AEG UCR Battery Charger. The unit is in full working condition and is ready for immediate release. AEG UCR Battery Charger Overview The AEG UCR Battery Charger is specifically designed for charging AEG batteries within the voltage range of 2.4 V to 12 V, making it ideal for AEG cordless power tools. Key Features: Voltage Compatibility: Charges batteries from 2.4 V to 12 V, ensuring compatibility with a wide range of AEG tools. Dedicated for AEG Cordless Tools: Tailored specifically for AEG power tools, ensuring optimal performance. Gkedpfxsxxzm Te Akhed Availability: Ensures the charger matches AEG batteries seamlessly. Next Day Delivery

Condition: excellent (used), color: other, Year of construction: 2006 Empty weight: 500 kg Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam Gkodpfezfig Ujx Akhsd IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, machine/vehicle number: FR00006450, Year of construction: 2021, operating hours: 898 h, lifting height: 5,900 mm, fuel type: electric, overall weight: 4,800 kg, The Electric Telehandler 2.6t is a green choice for single-shift or multi-shift material handling activities. The Electric Telehandler 2.6t runs with zero CO2 emissions and provides the same performance as a similar conventional telehandler model but without the noise of a combustion engine. It is a pioneer in the materials handling equipment sector. With a lifting capability of 2.6t, this revolutionary, eco-friendly electric telehandler is powered by a lithium battery, which provides a number of advantages such as faster charging times and significant savings in maintenance and operating expenses when compared to combustion engine equipment. The regular 300Ah battery has a battery life of up to 6 hours (depending on use) and a recharge time of 3h 45mins when charged with the standard external three-phase charger. By utilising the optional external fast charger, this time may be decreased to 1.5 hours. The Electric Telehandler 2.6t, with zero CO2 emissions, is perfect for use in confined or environmentally sensitive locations and serves a wide range of sectors including warehousing, shipping, manufacturing, recycling, and cold storage. It has all-wheel drive. The electric telehandler is highly practical and can also be utilised in construction, agricultural, civils, forestry, and infrastructure-based applications, making it a viable choice in today’s ecologically minded market. Gsdpfxo Ai S Sns Akhokd

Year of construction: 2010, operating hours: 4,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: N/A, Technical Specifications • Screen Drum Diameter: 1,200 mm • Working Length: 2,300 mm • Drive Power: 55–132 kW Gedowm Nfvepfx Akhskd • Dimensions: o Length: 3,600 mm o Width: 2,600 mm o Height: 2,300 mm o Height with Open Cover: 4,100 mm • Screen Perforation (Standard): 2.5 mm • Throughput Capacity: o Rigid Plastics: Up to 4.0 t/h o Films: Up to 1.8 t/h

Condition: used, Explosion-proof forklift battery, 24 volts, compliant with 2014/34/EU Explosion-proof forklift battery compliant with 2014/34/EU II 2G Ex eb IIC T6 Gb II 2D Ex tb IIIC T80°C Db BVS 03 ATEX E 266 X Gsdpfxjt Sq Ere Akhskd Forklift battery, 24 volts - Manufacturer: GNB Industrial Power - Model: Marathon Classic - Designation: EX 24V 3 EPzS 270 Flex Plus Aqua - Type: 3 EPzS 0270 SZC - Tray No.: 57534134010 - Nominal voltage: 24 Volts - Capacity: 270 Ah - Number of cells: 12 - Weight: 234 kg - Acid volume: 34 liters - Delivery date: 24.04.2019 - Battery charger - Still HFX 24V - 55 A - Benning E230G24/55B-HFX - Forklift battery, 24 volts - 55 A Dimensions: W x H x D 615 x 550 x 285 mm Applications The EPzS series drive batteries are ideal energy storage units for forklifts, cleaning machines, road vehicles, tractors and other electric vehicles with high energy requirements and heavy cyclic loads. Technical features > Robust lead-acid technology with liquid electrolyte > Proven tubular plate technology for long service life > Fully insulated terminal screws and connectors > DIN and BS sizes according to IEC 60254-2 > Manufactured according to DIN EN ISO 9001 > Environmental management according to DIN EN ISO 14001 > Fully recyclable You can find more items in other sizes – new and used – in our shop! International shipping costs available upon request!

Condition: used, Technical details: band width: 80 mm plate thickness: 1,5 mm number of rolls: 5 total power requirement: 1,2 kW weight of the machine ca.: 150 t space requirements approx. LxWxH: 1,1 x 0,7 x 1,4 m straightening rolls: - 2 upper rolls, 3 lower rolls - material feed is performed via two compressed air controlled rolls - compressed air connection is not mounted i.D. * Gkedju Ic E Rspfx Akhsd

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS GENERAL DATA Manufacturer: Linde Year of manufacture: 2022 Type: 48 V / 20 Ah ELECTRICAL DATA Battery voltage: 48 V Battery capacity: 20 Ah Gkjdpfx Ao Ad N S Eokhod MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 600 mm Width: 600 mm Height: 800 mm Weight: 50 kg EQUIPMENT 2 lithium-ion batteries Charger Battery connector Wall plug Lot number 3632 Collection conditions: Side loading up to 6 tons with a large forklift on site is possible. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons, and up to a width of 230 cm. Collection is only possible after receiving payment confirmation by email. Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out within the specified timeframe, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection.

Condition: used, Mitre Cold Circular Saw WMW (VEB GDR) Serial No. 189886 Year of manufacture: 1989 Saw blade diameter max. 300 mm Cutting range at 90° round approx. Ø 75 mm Square approx. 70 x 70 mm Cutting range at 45° round approx. Ø 55 mm Square approx. 50 x 50 mm Vice clamping width 100 mm Saw blade speed 31.5 rpm Motor power 0.37 kW Connection 230 Volt, 50 Hz - Mitre adjustment up to 45° - Material vice - Mounted saw blade Ø 275 mm Dimensions (L x W x H) 600 x 600 x 700 mm Weight 47 kg Good condition Godpjy Ra D Dsfx Akhjkd