Used Deckel Dc 30 for sale (700)

Condition: ready for operation (used), functionality: limited functionality, machine/vehicle number: 2832-1076, feed length X-axis: 560 mm, feed length Y-axis: 500 mm, feed length Z-axis: 390 mm, travel distance X-axis: 560 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 390 mm, feed rate X-axis: 4 m/min, feed rate Y-axis: 4 m/min, feed rate Z-axis: 4 m/min, spindle speed (max.): 4,000 rpm, spindle speed (min.): 40 rpm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 4 m/min, rapid traverse Z-axis: 4 m/min, total height: 2,265 mm, total width: 2,410 mm, total length: 2,710 mm, table width: 530 mm, table length: 900 mm, type of input current: three-phase, rotational speed (max.): 4,000 rpm, rotational speed (min.): 40 rpm, table load: 800 kg, overall weight: 2,890 kg, input voltage: 380 V, workpiece weight (max.): 800 kg, input current: 44 A, input frequency: 50 Hz, number of spindles: 2, number of slots in tool magazine: 20, Equipment: documentation/manual, Tool holder: SK 40, Control: DECKEL DIALOG 11, with documentation. According to our research, the NPL01 board of the tool changer is defective. Therefore, the automatic tool changer does not work. Otherwise, the machine is fully functional. Operating manual (Machine manual 1), diagnostic manual for the 'DIALOG11' control, machine manual 2 (accessories), programming manuals 1-3, and electrical wiring diagrams are available. Hedowqdtpjpfx Acrjl The machine can be viewed under power. The machine is bought as is. No warranty.

Condition: used, Year of construction: 2006, Technical details: x-travel: 800 mm Hodpfx Aepumdcscrel y-travel: 800 mm z-travel: 800 mm turning speeds: 12.000 1/min tool taper: SK 50 control: SIEMENS 840D shopmill tool change unit: 240 fach size of pallet: 630 x 630mm mm spindle: 52 kW / 430Nm total power requirement: 87 kVA weight of the machine ca.: 15 t horizontal machining center, NC-round-table pallet-changer (2 pallets), Internal Coolant Supply 40 bar, prepared for Infrared Touch Probe Renishaw MP 10 without probe, tool-breakage control (mech.), MQL, airblast through spindle, oilmist suction, TRANSMIT funbction, accuracy package, mode 4, glass window right door, incl. FASTEMS FPC 1000 pallet pool for 14 pallets, incl. setting up station, control, and 10 pallets approx. 98.500 h main switch on apprax. 45.500 Spindle hours *

Condition: good (used), Year of construction: 2006, TECHNICAL DATA Main drive Speed: Infinitely programmable: 18`000 rpm In set-up mode: 20 - 800 rpm Work spindle: Hollow shank taper: HSK-A63 Tool clamping: Hydraulic Feed drive Linear motor: X-axis AC servomotors: C, B, Y, Z Feed speed X, Y, Z: Up to 20`000 mm/min Rapid traverse Y, Z: 50 m/min X: 80 m/min B: 40 rpm C: 50 rpm Position measuring system Resolution: C, B, X, Y, Z: 0.001 mm Position tolerance: C, B, X, Y, Z: 0.010 mm Working range X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm B-axis: 0° to 161.955 ° C-axis: n x 360 ° Tool changer with double gripper Magazine slots: 120 Max. Tool diameter without free spaces: 80 Max. Tool diameter with free spaces: 130 Max. Tool length from spindle nose: 300 mm Max. Tool weight: 6 kg NC rotary table with swivel axis C-axis: Clamping surface rotary axis (mm): 500 x 380 mm Distance of T-slots / size: 63 / 14 H7 Centering bore: 30 H6 Max. Torque: 1491 Nm Max. Rotation of the table top: 50 rpm B-axis: Max. Swivel torque: 1864 Nm Swivel speed: 40 rpm Swivel range: 0° - 161.955 ° Input and display precision: 0.001 ° Weight: 420 kg Hsdpfx Asu Hkb Recrsl Max. load: 200 kg Weight: Approx. 6800 kg Installation weight: Approx. 7500 kg Dimensions: 4170 x 3133 x 2560 mm SCOPE OF OFFER U.A: (list not exhaustive): Deckel Maho DMU 50 Evo CNC machining center Heidenhain iTNC 530 Tool breakage control Blum measuring probe Oil mist separator Fire extinguishing system High-pressure pump and belt filter system Chip conveyor Exact scope of supply according to photo gallery We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: good (used), Year of construction: 1988, DECKEL S11 tool grinding machine - good condition - Scope of offer according to photos - EXW CH-4528 Zuchwil Technical data Clamping surface of the tool slide: 500 x 180mm Max. Tool diameter between the tips: 130mm Max. Tool diameter with flying clamping in the universal dividing head: 620mm Max. Tool lengths between centers: 270mm T-slot machine stand: 12mm T-slot grinding head, tool slide and accessories: 8mm Sanding stroke: 190mm Sanding stroke for twist sanding: 190mm Hjdpfx Acor Elwkerel Cross adjustment of tool slide: 100mm Vertical adjustment of sanding head: 325mm Longitudinal adjustment of grinding spindle: 5mm Tool carrier: 220mm Grinding head support: 800mm Universal dividing head on tool slide: 330mm Sanding head support: 360 degrees Sanding head: 360 degrees Tool carrier: 360 degrees Three-phase drive motor: 1.1KW at 2800 rpm Spindle speeds: Infinitely variable 2000 to 12000 rpm Max. Grinding wheel diameter: 125mm Max. Cutting wheel diameter: 200mm Weight: approx. 800 kg Dimensions: 800 x 1100 x 1760mm Space requirement: 2.5 x 2.3 m No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: used, Brand Deckel Model FP4M Hsdpfxjw Hyb Ue Acrjl Year of manufacture 1987 Spindle taper SK40 X-axis 500 mm Y-axis 400 mm Z-axis 400 mm Table 800x460 mm Spindle speed 50-2500 rpm Power 4.4 kW

Condition: excellent (used), Year of construction: 2004, Great opportunity to buy this 5 axis machining center with automatic loading cell. Including: Set of toolholders High pressure cooling through the spindle chip conveyor Paper belt filter Oil mist extraction Programmable coolant jet Heidenhain measuring probe TS 641 Tool breakage control BMO automatic loading cell with Yaskawa Motoman robot MH50 (installed in 2014) Including: 40 pallets 300 x 300 mm 40 Gressel clamps 4-way 0-span module Schunk Yaskawa DX100 controller X 500 mm Y 420 mm Z 380 mm Control Heidenhain TNC 530 Max spindle speed 18.000 rpm Power 35kW Tool magazine 60 tools Tool holder SK40 Hedpfxeyr N Rho Acrsl This machine combination can be inspected in operation upon appointment. Availability: April-May 2026 More information available on request. Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection.

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, Universal Milling & Drilling Machine DECKEL MAHO DMU 50 M Equipped with Heidenhain TNC 310 control Year of manufacture: 2001 Travel paths: X 500, Y 400, Z 400 mm Speed range: 20 – 4,500 rpm, infinitely variable Includes the following accessories: Manual swivel rotary table with digital display for C + B axes Clamping surface: 700 mm x 500 mm Electronic handwheel for X, Y, Z axes Splash guard enclosure Machine lamp 4 adjustable-height machine feet Coolant system Operating manual Hedpfxey Id Stj Acrol

Condition: ready for operation (used), Year of construction: 2004, operating hours: 40,000 h, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller manufacturer: HEIDENHAIN, controller model: Mill Plus, spindle speed (max.): 18,000 rpm, number of axes: 3, This 3-axis DMG DECKEL MAHO DMU 80T was manufactured in 2004. It features a high-speed spindle at 18,000 RPM, internal coolant supply with 40 Bar pressure, and a 32-station tool changer. The machine includes SK 40 tool holders and a Rotoclear viewing window. Ideal for demanding machining tasks, consider the opportunity to buy this DMG DECKEL MAHO DMU 80T vertical machining centre. Contact us for more information about this machine. • Spindle cooling: Active cooling Hodsx D Iunjpfx Acrol • Cooling: Air or coolant • Internal coolant supply: 40 bar (through-spindle) • Tool changer: 32 stations • Operating mode: Mode 4 (working with open door) Additional equipment • Belt filter system: Interlit SPD 3-600-HD • Mist collector • Rotoclear viewing window • Control cabinet cooling unit

Condition: not inspected (used), Year of construction: 1986, feed length X-axis: 580 mm, feed length Y-axis: 400 mm, feed length Z-axis: 450 mm, spindle speed (max.): 2,500 rpm, Grunding Contour 2 table 800x460 mm travel 580x400x450 mm max spindle speed 2500 rpm Hedpfx Ajy E N Dvecrol spindle taper 40

Condition: used, Year of construction: 2008, operating hours: 50,745 h, functionality: limited functionality, machine/vehicle number: 15115223254, travel distance X-axis: 2,200 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 720 mm, controller manufacturer: Siemens, controller model: Siemens 840D, workpiece weight (max.): 2,200 kg, overall weight: 12,000 kg, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Deckel Maho DMF 220 Linear – 3-Axis Machining Center – Used For sale is a used 3-axis machining center, model Deckel Maho DMF 220 Linear. 18,400 spindle hours 50,745 power-on hours The machine was actively used in series production until recently and was mainly employed for machining steel and aluminum. Due to investments in new equipment, the machine will no longer be overhauled and is therefore being sold as is. Condition: The machine is generally operational, but has a spindle defect. The spindle needs to be repaired. Features: - Partition wall for setup time optimization (parallel machining/setup in one half of the enclosure) - Conveyor belt filtration system for coolant processing - Automatic tool changer - Spacious working area for complex components Terms of sale: - Price ex foundation - Transport and loading to be arranged by the buyer - Viewing by appointment only Hsdpfx Aoy Hqufecrol Note: The machine was in productive use until a few weeks ago, right up to its decommissioning. Price is negotiable.

Condition: used, Year of construction: 2008, Technical details: x-travel: 700 mm y-travel: 700 mm z-travel: 700 mm turning speeds: 18.000 1/min max. torque on the spindle: 110 / 84 Nm tool taper: SK 40 control: HEIDENHAIN iTNC 530 tool change unit: 180 fach size of pallet: 500 x 500 mm mm max. workpiece weight: 600 kg spindle: 34 / 28 kW rapid traverse: 60 m/min total power requirement: 68 kVA weight of the machine ca.: 10,5 t dimensions of the machine ca.: 9,5 x 7,5 x 3,4 m horizontal machining center with linear drives,, NC-roundtable, pallet pool RS 10 for totally 12 pallets, monitor for workpiece setting-up device, high pressure coolant through spindle 40bar, internal air blast supply, mode 4, hydraulic clamping 2/4 for workpiece setting-up device and working table, BLUM laser, oilmist suction, 3D touch probe TS 649, tool-breackage control, mechanical, SDS spindle diagnosis system, flush gun, el. handwheel, chipconveyor, approx. 112.000 h "machine on", approx. 79.500h "spindle on", Hjdpoy E Np Sefx Acrsl *

Condition: ready for operation (used), Year of construction: 2014, operating hours: 20,030 h, spindle speed (max.): 8,000 rpm, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 HSCI, spindle motor power: 23,000 W, table load: 1,200 kg, number of slots in tool magazine: 60, number of axes: 5, This 5-axis DECKEL MAHO DMF 260/11 was manufactured in 2014. It features an impressive X-axis travel of 2600 mm, Y-axis travel of 1100 mm, and Z-axis travel of 900 mm. The machine is equipped with a vertical motor spindle with a spindle speed range of 20 – 8000 rpm and a tool magazine capacity of 30 tools. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMF 260/11 universal machining centre. Contact us for further details. • Control interface: Heidenhain ERGOline, 19" screen • Rapid traverse: 40 m/min; Acceleration: 4 m/s² • Main spindle: Vertical motor spindle power 23 / 5 / 13.5 kW (25 / 100% ED) • Swivel head: B-axis, up to 18000 rpm; spindle interface HSK-A63; power 35 / 25 kW (40 / 100% ED) Hodpfx Aey D Ilcocrol • Tool magazine: 30 tools; chain magazine with double gripper; chip-to-chip 9 s • Tool magazine (optional): 60 tools SK40 / HSK-A63 • Table: 3200 x 1100 mm • Rotary table integrated: 1050 mm diameter • Clamping: Hydraulic • Measuring system: Direct measuring systems • Machine design: Full enclosure with coolant tank; 2 rotating viewing windows • Air supply: Sealing air for linear measuring systems • Through-spindle air: Selectable via M-function • Operating mode: Process monitoring in production • Language: German / English screen texts • Workpiece clamping release: Automatic mode enable • Condition/Service history: • New spindle and new guideways, completely renewed by DMG (January 2026) • Geometry remeasured and adjusted by DMG (January 2026) • New spindle less than 100 hours Additional equipment • Chip conveyor: Scraper belt type • Touch probe: Heidenhain TS 649 infrared measuring probe • Tool measurement: Blum laser tool measurement system • Kinematic calibration: 3D quickSET • Machine protection: MPC Machine Protection Control • Internal coolant supply: 40 bar / 600 l with paper band filter • Coolant/mist extraction: Oil and emulsion mist extraction system; extraction capacity 2 x 1600 m³/h • Electronic handwheel • Coolant flushing gun (included) Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2004, Ref. -No.: 10629 Manufacturer: MICHAEL DECKEL Hjdpfoy Ed Sbjx Acrel Type: S20 Turbo Year of construction: 2004 Type of control: CNC Storage location: Halberstadt Country of origin: Germany Workpiece Diameter: 250 mm Max. Grinding length: 340 mm Max. Workpiece Weight: 50 kg Grinding wheel diameter (max.): 150 mm Turning Speeds: 8000 RPM Workpiece holder: SK 50 Further information: The machine can be viewed while powered up.

Condition: good (used), Internal Item No.: 26045 Universal Tool Grinding Machine Deckel S11 + Comprehensive accessory package + Optics with digital display Hjdoy Ibfqspfx Acrol + Extraction unit + Machine lamp Center height, universal dividing head: 170mm Center height, tailstock: 120mm Maximum workpiece diameter between centers: 338mm Maximum workpiece diameter for cantilever mounting: 600mm Maximum length between centers: 950mm Grinding stroke: 190mm Cross adjustment of tool carrier: 100mm Height adjustment of grinding head: 325mm Maximum grinding wheel diameter: 125mm The machine is fully functional and, by arrangement, can be inspected under power on over 500m² of heated warehouse space.

Condition: good (used), Year of construction: 1986, CNC universal milling machine Make DECKEL Type: FP5NC Bj.1986 control DIALOG 4 Hsdpfoy H Ifbex Acrel Traverse paths: X710mm Y600mm Z500mm Clamping table : 1000mm x 550mm Tool clamp: SK40 Feed speed programmable: 2 ... 3600 mm / min Speed: 18 ... 6300 rpm Spindle power: 7.5KW machine in stock.

Condition: good (used), functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, Heidenhain TNC 310 cnc control C and B-axis manual with display Hedpfx Asy E Iztjcrsl swivel rotary table electronical hand wheel coolant device Technische Daten: Längsweg (X-Achse) / X-travel longitudinal 500 mm Querweg (Y-Achse) / Y-travel cross 400 mm Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Werkzeugaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed range 20-4500 UpM Vorschub / feed 5000 mm/min. Gewicht ca. / weight ca. 2800 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Year of construction: 1982, functionality: fully functional, Universal Milling Machine Deckel FP3 with 3-Axis Active Digital Readout (Heidenhain) and Infinitely Variable Feed, Original Excellent Condition Technical Data: >> Year of manufacture: 1982 Machine no. 2201-5527 >> Swivel-tilt-rotary table >> Speed range: 25 - 2500 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in all 3 axes >> Drive power: 2.0 / 4.0 kW >> Spindle brake >> Travel X/Y/Z: 500/300/400 mm >> Vertical milling head can be displaced 200 mm on spindle carrier >> Vertical and horizontal quill, SK40, extendable >> Pull stud system: M16 >> Weight: approx. 1,500 kg Accessories and Equipment: >> 3-axis active digital readout Heidenhain TNC113 >> Coolant system >> Central lubrication About the machine: Hodpfx Acoy Eqkzjrol Offered here is a universal milling machine Deckel FP3 in very good original condition. The machine shows minimal backlash and all spindles move smoothly. On this newer FP3 model, the feed is infinitely variable in all three axes, and each axis features rapid traverse. A significant advantage is the active 3-axis digital readout. With the Heidenhain positioning control, you can enter dimensions and the machine will automatically move to defined positions. An oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital display makes operation easier and even more precise. You are welcome to inspect and test the machine under power at our site. The machine is available immediately.

Year of construction: 2001, operating hours: 26,266 h, condition: used, Empty weight: 7.000 kg Dimensions (LxBxH): 350 x 220 x 240 cm Price: On request Milling machine, VMC Model: CNC Manufacturer: DMG / Deckel MAHO Type: DMU60T Year of manufacturing: 2001 Control: Heidenhain Working-hours: 26266 Travel: 630x560x560mm Spindle-speed: 10.000 rpm Table-dimensions: 1000x600mm Spindle-take: ISO40 Max. Workpiece-weight: 400kg Incl. Filter Interlit SK200-760 Incl. Automatic toolholder Incl. Documents Incl. Video available Machine-weight: 6700kg Machine-dimensions: 3500x2400x2200mm - Year: 2001 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Operating hours: 26266 - Drive system: CNC - Control system brand: Heidenhain - Number of axes [pcs]: 3 - X-axis travel [mm]: 630 - Y-axis travel [mm]: 560 - Z-axis travel [mm]: 560 - Table length [mm]: 1000 - Table width [mm]: 600 - Tool holder: SK40 - Max. spindle speed [rpm]: 10000 - Options: External cooling, Tool magazine - Transport dimensions: 3500mm x 2200mm x 2400mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Hedpfoywt Nyex Acrel Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 1997, condition: used, Price: On request - Year: 1997 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No Hjdpfxewh Shve Acrsl - Drive system: CNC - Control system brand: Heidenhain - Number of axes [pcs]: 5 - X-axis travel [mm]: 1200 - Y-axis travel [mm]: 880 - Z-axis travel [mm]: 800 - Table length [mm]: 5000 - Tool holder: SK40 - Max. spindle speed [rpm]: 18000 - Options: Digital readout - └ Type of digital readout: Heidenhain Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total height: 2,000 mm, total width: 2,300 mm, total length: 3,000 mm, Empty weight: 3.200 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Number of axes [pcs]: 3 - X-axis travel [mm]: 800 - Y-axis travel [mm]: 450 - Z-axis travel [mm]: 500 - Table length [mm]: 1050 - Table width [mm]: 625 - Tool holder: ISO40 - Min. spindle speed [rpm]: 32 - Max. spindle speed [rpm]: 1600 - Options: Digital readout - └ Type of digital readout: Heidenhain - Transport dimensions: 3000mm x 2300mm x 2000mm (l x w x h) Hsdpfx Aswnif Socrel - Transport weight [kg]: 3200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2011, operating hours: 54,900 h, functionality: fully functional, travel distance X-axis: 7,350 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller manufacturer: Heidenhain, controller model: iTNC 530 HSCI, table load: 600 kg, rotational speed (max.): 18,000 rpm, Equipment: chip conveyor, Motor spindle SK 40 Tool holder for HSK-A63 Infrared measuring probe ICS 40 bar Electronic handwheel iTNC 530 Hjdjy Hh T Sepfx Acrol

Condition: used, Year of construction: 2010, x-travel 500 mm y-travel 450 mm z-travel 400 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW max. Torque 83 / 57 Nm tool taper SK 40 DIN 69871 table surface area 700 x 500 mm max. table load 500 kg T-slots 7x 14 x 63 mm Hedoy E Tv Aopfx Acrjl number of toolpositions 60 pos. max. tool weight 6 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm change-time tool to tool 1,6 sec change-time chip to chip 8,0 sec rapid traverse 24 m/min Feed force ( X / Y / Z ) 4,5 kN feed speeds 1 - 24.000 mm/min total power requirement 26 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 4,5 x 3,5 x 2,3 m CNC - Milling Machine Vertical DECKEL MAHO - DMU 50 - 3 Axis - only ca. 8.097h Spindle-Hrs. - Backup package for power outages - DXF import - incl. workbench - incl. tool cabinet - incl. cabinet for SK 40 tool holders - incl. approx. 63 SK 40 tool holders

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, Universal Milling Machine Deckel FP3 with 3-Axis Active Digital Readout TNC 113 by Heidenhain and Infinitely Variable Feed—Excellent Condition Technical Data: >> Year of manufacture: 1983 Machine no. 2201-5919 >> Fixed angle table (reconditioned) >> Speed range: 25 – 2500 rpm >> Infinitely variable feed on all 3 axes >> Rapid traverse on all 3 axes >> Drive power: 2.0 / 4.0 kW >> Spindle brake >> Travel (X/Y/Z): 500 / 300 / 400 mm >> Vertical milling head movable on spindle head by 200mm >> Vertical and horizontal quill—SK40 extensible >> Pull-in system S20 x 2 >> Weight approx. 1500 kg Equipment and Accessories: >> 3-axis active digital readout Heidenhain TNC113 >> Coolant system >> Central electric lubrication About the machine: Offered here is a Universal Milling Machine Deckel FP3 in very good condition. The machine has very little backlash and all spindles move smoothly. On this newer FP3 model, the feed is infinitely adjustable in all three axes, and the machine also features rapid traverse for each axis. A major advantage is the active 3-axis digital readout. With the Heidenhain control, you can input dimensions that the machine will automatically position to. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain DRO makes operation both easier and even more precise. Take advantage of the opportunity to inspect and test the machine under power on site. The machine is available immediately. Hedpfx Asy D Tl Iecrel

Condition: ready for operation (used), Year of construction: 2001, Immediately available ex-site: 5-Axis Machining Centre Deckel Maho Model: DMU 50 M Year of manufacture: 2001 Control system: Heidenhain TNC 124 5 axes (3 + 2) Manual rotary axes with B and C swivel rotary table B and C axes are displayed on the control Table size: 700 x 500 mm Travel paths X/Y/Z: 500 / 400 / 400 mm Table load capacity: 200 kg Spindle taper: SK 40 Spindle speeds: 20 – 4,500 rpm Hedpfx Ajy E Ncxscrel Drive power: 9 / 13 kW C-axis rotation range: 360 degrees Swivel range: plus 95 / minus 10 degrees Feed rate up to 5,000 mm/min Spindle speeds: 20 – 4,500 rpm Weight: 3 tonnes Coolant system Price: EUR 8,500.— net, ex-site, plus VAT.

Condition: ready for operation (used), Year of construction: 2003, Immediately available ex works: 5-axis (3 plus 2) machining centre Deckel Maho Type DMU 35 M Year of manufacture: 2003 Siemens 810 D control Electronic handwheel Universal tilting/rotary table 400 x 290 mm Travel X/Y/Z: 350/240/340 mm Spindle taper SK 40 Hsdpfxjy E Ncfe Acrel Spindle speeds: 20 – 6300 rpm Drive: 6.3/10 kW Table load: 100 kg Rotation range: 360 degrees Swivel range: plus 105 / minus 15 degrees Distance spindle nose – table: 145/485 mm Feed rates up to 3000 mm/min Weight: 1750 kg Price: Euro 4,500.—plus VAT ex location