Used Deckel Fp 3 for sale (746)

Condition: used, x-travel 800 mm y-travel 300 mm z-travel 400 mm General overhaul in 1997 total power requirement 3 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 2*2*1,8 m Factory overhauled by DMG in 1997 Lolhccqeuynlmspshg

Condition: used, Year of construction: 1970, x-travel 500 mm y-travel 300 mm z-travel 400 mm table surface area 800 x 370 mm spindle taper SK 40 spindle turning speed range 40 - 2000 U/min feeds 5 - 500 mm/min Lholhswk N Rgsccqpog rapid traverse 1,5 m/min total power requirement 4,0 kW weight of the machine ca. 1,4 t - machine out of teaching shop - Accessories: univ.-table, vertical head with quill retraction, DRO on 3 axis HEIDENHAIN, dividing unit with 3-jaw chuck and counter bearing, various tool fixtures, counter bearing, original DECKEL tool cabinet

Condition: not inspected (used), Please see technical details on photo. Lhjlshvzxzshccqpsg

Year of construction: 1982, Condition: refurbished (used), Universal tool milling machine Make: DECKEL Model: FP 3 Active year of construction: 1982 - overhauled, new painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey-blue Lolhccspn Rgvoqpehg machine no.: 2201-5539 with warranty geometric acceptance with test report accessories: - 3-axis active digital display HEIDENHAIN TNC 111 - Universal table 650 x 370 mm (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread M 16 - Central lubrication, manually operated - coolant device - Operating instructions used as seen The machine corresponds technically the state of the art of the year of construction.

Condition: defective spare-parts repository (used), Year of construction: 1980, Functionality: not functional, machine/vehicle number: 2271 / 1701-0527, In use until summer 2024, since then electrical defect, screen black Lolhev Uzhgoccqpjhg

Condition: used, CNC Milling Machine DECKEL Type FP 3 A Tool-tool milling machine with handwheels, also for conventional operation Serial No. 2206 - Built in 1982 GRUNDIG CNC 2101 CNC control system Travel paths X: 490 mm, Y: 300 mm, Z: 340 mm Table size 705 x 425 mm Spindle mount SK 40 Quill stroke 100 mm Spindle speed 25 - 2500 rpm, 21 steps Feed rate 5 - 500 mm/min, continuously variable Rapid traverse speed 1200 mm/min Spindle motor power: 2/4 kW, pole-changing Power supply: 380 V, 50 Hz - GRUNDIG CNC 2101 CNC control system - Mechanical handwheels for all three axes - Universal tilt-and-turn table - Vertical milling head tilts and is manually adjustable by 200 mm - Hydro-mechanical tool clamping - Coolant system in the machine base - Protective enclosure at the front and sides with three hinged doors - Control cabinet adjacent (L x W = 600 x 430 mm) Space requirement: L x W x H: 1900 x 1700 x 1950 mm Weight: 1700 kg (machine 1540 kg + electrical cabinet 160 kg) Very good condition Lolhccqev R E Rdepjhg

Year of construction: 1990, Condition: used, Scope of delivery as illustrated div. Baugruppen Shipping weight Auf Anfrage kg Packing Auf Anfrage mm DECKEL FP 3 CC / 2811 Assembly overview Item Manufacturer Designation Type Cover / FD - No. 1 Siemens Sinumerik 880 CNC control panel 6006 802142 Control cabinet 2 Siemens Sinumerik 880 CNC 6FC3491-0AA-Z 3 Bosch capacitor module KM 1100 - T 6005 04 512023 00 4 Bosch supply module VM 60 R - T 6005 04 512026 00 5 Bosch spindle module SPM 25 - T 6005 04 610120 00 Ljlhccjunut Sjqpshg 6 Bosch servo module SM 10 / 20 - TC 6005 04 512034 00 7 Bosch servo module SM 10 / 20 - TC 6005 04 512034 00 8 Bosch servo module SM 10 / 20 - TC 6005 04 512034 00 9 Bosch servo module SM 25 / 50 - TC 6005 04 512035 00 Machine 10 Bosch servomotor SE - B4 100.030.01 6005 500150 11 Bosch Servomotor SE - B4 100.030.01 6005 500150 12 Bosch servomotor SE - B4 200.030.05 6005 500153 13 Bosch asynchronous motor Spdl. DM 112 4 S 6005 605101 14 Heidenhain scale X - axis LS 404 - ML 470 2002 008572 15 Heidenhain scale Y - axis LS 404 - ML 470 2002 008572 16 Heidenhain scale Z - axis LS 404 - ML 570 2002 008560 17 VOGEL centralised lubrication 122 044 302 6096 04 009240 00 18 Heilmeier Weinlein hydraulics 6096 009502 19 Spandau coolant tank approx. 150 litres 20 Cover rigid table 460 x 700 mm 2230 001100 21 Milling head cover with quill 3891 ? 22 Cover / Eucher Electronic handwheel 2280 04 000345 01 25 Lid basic machine - column with X/Z cross slide / Y-headstock Cabin / panelling 26 DECKEL Chip and splash guard cabin 2280 000405 with chip trolley 2280 000407 27 Slat cover X-axis 28 Z-axis disc cover 29 DECKEL Cover

Year of construction: 1995, Condition: used, 3-axis machine Dialog 12 control Table size 800x400mm working range: Lhelhccsh Dh Atoqpog x-axis movement 500 MM y-axis movement 400 MM z-axis movement 400 MM spindle speed up to 5,000 rpm Electr. handwheel

Condition: reconditioned (used), Year of construction: 1988, Universal tool milling machine Make: DECKEL Model: FP 3 LV Active Year of manufacture: 1988 - overhauled, repainted RAL7035 light gray / RAL7012 basalt gray RAL5008 gray blue Mach. no.: 2309-0146 Milling head type: 2271 Milling head number: 700-0887 Guarantee: 12 months single shift from delivery on the mechanics overhauled by us. The electrics and electronics are excluded from this, as they have only been subjected to a functional test. For machines located outside of our northern Bavarian sales area, the travel costs must be borne by the customer. Lhelhccqotdnb Ejpog geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 113 - Fixed table 1,390 x 550 mm (T-slot: 16 mm) - Vertical milling head SK 40 with drawing thread M 16 - Central lubrication, manually operated - Coolant system - Operating instructions Used as seen The machine is technically as it was built at the time.

Condition: used, Year of construction: 1990, x-travel 400 mm Lhjlheug I Raeccqpjg y-travel 400 mm z-travel 500 mm Control Sinumerik 880 total power requirement 9 kW weight of the machine ca. 3 t dimensions of the machine ca. 3 x 3 x 2,7 m Fixed table Full protection cabin Electronic handwheel Documentation Spindle holder SK 40 / DIN 2080 Speed range up to 6300 min-1 Rapid traverse 10 m/min

Condition: reconditioned (used), Year of construction: 1988, Universal tool milling machine Make: DECKEL Model: FP 3 L Active Year of manufacture: unknown - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray RAL5008 gray-blue Mach. no.: 2302-2319 Milling head type: 2271 Milling head number: 700-0883 with guarantee geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 111 - Universal table 1000 x 520 mm (T-slot: 16 mm) - Vertical milling head SK 40 with Tightening thread S 20 x 2 Lhjlhccoh Rv U Eeqpog - Central lubrication, electric - Coolant system - Operating instructions - Drill grinding device with diamond disk -used, as seen-

Condition: used, surface area 710 x 430 mm no. of flutes 5 groove width ? mm weight of the machine ca. 230 kg Lelhceunubpjcqpehg dimensions of the machine ca. 800*800*500 m

Year of construction: 1976, Condition: refurbished (used), Universal tool milling machine Make: DECKEL Model: FP 3 year of construction: 1976 - overhauled, new painted RAL 7035 light grey / RAL 7012 basalt grey RAL 5008 grey-blue machine no.: 1601 Milling head type: 2027 Milling head number: 1483 with warranty geometric acceptance with test report accessories: - 3-A digital display FAGOR Innova 30i-M, new - fixed table 800 x 420 mm (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Central lubrication, manually operated - coolant device Lelhccqod S Hztjpehg - Operating instructions -used, as seen-

Condition: repair required (used), Year of construction: 1980, x-travel 800 mm y-travel 300 mm z-travel 400 mm total power requirement 3 kW weight of the machine ca. 2,,2 t Lhslouynl Tohccqpog dimensions of the machine ca. 2,5*2*2 m

Condition: excellent (used), Year of construction: 1983, Functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital readout K&C New and 3-axis stepless feed Super CONDITION Technical data: >> Year of construction 1983 Machine no. 2102-2444 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: Lhelhccetwlwzoqpjg >> 3-axis digital indicator K+C Newly assembled with manufacturer's warranty and operating instructions. Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. >> Coolant device >> Operating instructions, spare parts plan To the machine : We are offering a Deckel FP1 universal milling machine built in 1983 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. The FP1 was in a training workshop where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The new digital display from K&C makes work easier and even more precise. Take the opportunity to inspect and try out this little gem under power on site.

Condition: good (used), Tool milling machine DECKEL FP1 with 3-axis active digital display TNC 113 from educational institution -Travel paths X/Y/Z 300x160x340mm Ljlhsv Abp Tjccqpjhg -Speed range 40-2000 rpm -Feed continuously variable in three axes -Rapid traverse in all three axes -Vertical milling head - 100mm movable -Vertical - horizontal milling device -Drive power 1.5/1.9KW -Rigid angle table -3-axis digital display Heidenhain TNC113 -Coolant device -Work light -Documentation Dimensions: LxWxH 1.3x1.2x1.6 meters / weight 850Kg Errors / input errors reserved

Condition: reconditioned (used), Year of construction: 1989, Dear Sir or Madam, for sale is a partially overhauled Deckel FP1 with 3-axis TNC113 active control, which is particularly distinguished by its ease of operation. This newer version from year of manufacture 1989 has among other things a central lubrication, an electric coolant pump and a machine lamp. The machine has been extensively overhauled in our workshop and is therefore in excellent condition. You can convince yourself of this on site. In the course of the partial overhaul, among other things, the following work was performed: - Spindle bearing of the milling head renewed - Repainting - Various standard parts such as handles, oil sight glasses, keys etc. renewed Leljpy Eldohccqpjhg - Wear parts like drive belts etc. renewed - Bellows partly renewed - V-guides adjusted - and much more... Delivery time: immediately year of manufacture: 1989 Machine No. 2102-xxxx Table: rigid angle table travels: X300mm/Y160mm/Z340mm quill stroke: 60mm Connected power: 1,9KW number of spindle speed: 16 Speed range: 40-2000 rpm Dlp00n tool holder: SK40 feed rate: stepless 5-500 mm/min rapid traverse: 1200mm/min Equipment and accessories: coolant system, central lubrication, manual, machine feet Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and possibly worn parts are exchanged in advance - On request, we overhaul the selected machine completely or in part - If desired, they can order additional accessories such as tools, etc. directly with - On request we can mount further accessories like safety devices etc. for you - Gladly we take care of the dispatch and/or the bringing in

Condition: excellent (used), Year of construction: 1985, Functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital readout K&C New and 3-axis stepless feed Super CONDITION Technical data: >> Year of construction 1985 Machine no. 2102-2867 >> Turn-tilt-swivel table (newly planed) >> Speed: 40 - 2000 rpm >> feed stepless in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system M16 >> Weight approx. 800 kg Lelhccqot Aarpepohg Accessories and equipment: >> 3-axis digital indicator K+C Newly assembled with manufacturer's warranty and operating instructions. Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. >> Coolant device >> Operating instructions, spare parts plan To the machine : We are offering a Deckel FP1 universal milling machine built in 1985 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. An oil change has been carried out. Mechanically and electrically tested. The new digital display from K&C makes work easier and even more precise. Take the opportunity to inspect and try out this machine under power on site.

Condition: good (used), Functionality: fully functional, machine/vehicle number: S/N° 8070, serial number 8070 Stock No. 2372 Technical details x-travel 400 mm y-travel 190 mm z-travel 325 mm Table surface 700 x 240 mm Tool holder SK 40 Spindle speeds 40 - 2000 rpm Feed range 8 - 400 mm/min Motor power 2.2 kW Machine weight approx. 1.2 t Equipment and accessories: 3-axis digital display Feed and rapid traverse in 3 axes Lolhcjwlpv Escqpohg Vertical + horizontal spindle Adjustable angle table Vertical milling head can be swiveled

Condition: used, Year of construction: 2008, x-travel 780 mm y-travel 560 mm z-travel 560 mm control iTNC 530 Heidenhain Main spindle: turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 / 82 Nm tool taper SK 40 (150° (-120/+30)° pallet changer: Number of pallet-stations 4+1 pos. size of pallet 630 x 500 mm max. load 400 kg T-slots 5x 14 x 100 rotary table 360 ° tool magazin: number of toolpositions 120 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 160 mm Lhelju Elqqehccqpog max. tool length 315 mm max. tool weight 8 kg feeds: rapid traverse ( X / Y / Z ) 50 m/min feed speeds 20 - 15.000 mm/min measuring system resolution capability 0,001 mm total power requirement 61 kVA weight of the machine ca. 12,0 t dimensions of the machine ca. 6,0 x 6,0 x 2,8 m CNC Machiningcenter Universal DECKEL MAHO - DMC 60 T RS 3 - 5 axes - 120 pos. tool changer - Number of pallet-stations 4+1 pos. - Internal coolant supply - HEIDENHAIN measuring probe - BLUM tool measurement - Spindle replacement Feb. 2024

Condition: used, Year of construction: 1980, x-travel 1200 mm y-travel 400 mm z-travel 400 mm total power requirement 5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 3 x 2 x 2 m No. 4427 Universal tool milling machine DECKEL FP 4 L / 2707 Ljlhcounufnecqpehg Working area: 1200 x 400 Fixed angle table Control: 3-axis digital display Weight approx. 3.5 tons Space requirement 3 x 2 x 2 m

Condition: excellent (used), Year of construction: 1988, Functionality: fully functional, The machine is in very good condition and comes from a training workshop. Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 210 x 600 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 rpm feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 730 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Equipment: Safety cover and LED lamp retrofitted in 2016 3-axis active digital readout made by Heidenhain Fixed angle table Coolant equipment Lhelhcjwlpg Rjcqpsg

Condition: used, Year of construction: 1988, x-travel 300 mm y-travel 160 mm z-travel 340 mm total power requirement 2 kW weight of the machine ca. 1 t dimensions of the machine ca. 1,5 x 2 x 2 m Nr. 3287 Universal tool milling machine DECKEL FP 1 Working area: 300 x 160 x 340 Control: Active digital display Drive: 1.5 kW Speed range 2000 rpm Lhsletqp A Eshccqpeg Tool holder SK-40 Rigid angled table 210 x 600 mm Documentation Optional / available on request: - Universal table - counter holder - Rotary table Ø 380mm - Dividing head

Condition: used, Year of construction: 1991, x-travel 500 mm y-travel 400 mm z-travel 400 mm Control Heidenhain TNC 113 total power requirement 4 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 2*2*2 m No. 5152 Universal tool milling machine Deckel FP 4 M (K) - 2203 Working area: 500 x 400 x 400 Drive: 4 kW Spindle holder SK 40 / DIN-2080 Speed range 50 - 2,500 min-1 Lolhccotqp Tvoqpehg Feed rates 8-630 mm/min stepless Rapid traverse 1.3 m/min Fixed table 800 x 460 mm Chip tray Heidenhain TNC 113 Active Digital readout Space requirement approx. 2 x 2 x 2m Weight approx. 1,500 kg

Condition: used, Year of construction: 1987, x-travel 300 mm y-travel 300 mm z-travel 400 mm Control Dialog / Contour 3 total power requirement 4 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 2*3*2 m Package price: 3 x DECKEL FP 2 EXW free lorry Stock no: 5267 FP 2 A Contour 3 Lhelhccqsunuu Njpsg 5268 FP 2 A Contour 3 5290 FP 2 NC Dialogue 2