Used Deckel Maho Dmc 63 V for sale (331)

Condition: good (used), Year of construction: 2001, operating hours: 12,219 h, functionality: fully functional, nominal power (apparent): 30 kVA, controller manufacturer: Siemens, controller model: Sinumerik, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, For sale is a used CNC vertical machining center, DECKEL MAHO DMC 63 V, manufactured in 2001, in good condition for its age. The machine is operational and can be inspected with power applied after prior arrangement. • Control system: Siemens Sinumerik • 4th axis from PL Lehmann with three-jaw chuck • Tool magazine • Coolant system with separate unit for high-pressure internal cooling • Operating hours: approximately 12,219 hours in single-shift operation • Chip conveyor Supply voltage: 400 V Phases: 3+PE Frequency: 50/60 Hz Current consumption: 42 A Fuse rating: 50 A Hjdez Dpkzepfx Al Asu Power consumption: 30 kVA Secondary voltage: 230 V Secondary voltage: 24 V Machine number: 809 409 If you have any questions or require further information, please send us a message or call us.

Condition: good (used), Year of construction: 2005, operating hours: 10,762 h, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 500 mm, table width: 560 mm, table length: 790 mm, overall weight: 4,000 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 20, Equipment: chip conveyor, documentation/manual, CNC Milling Machine DMG DECKEL MAHO DMC 635 V TECHNICAL DATA: - Year of manufacture 2005 - Program run time 10 762 hours - Power-on time 37 612 hours - X 635 mm - Y 510 mm - Z 500 mm - Control SIEMENS SINUMERIK 840 D powerline (ShopMill) - Spindle speed max. 8 000 rpm - Table size 790 x 560 mm - Tool magazine 20 positions (SK40) - Machine dimensions 3.4 x 2.4 x 2.5 m - Weight approx. 4 000 kg Hedpfoz Hkw Uox Al Aeu EQUIPMENT: - Through-spindle coolant - Flushing system - Chip conveyor - Handwheel - USB - Technical and electrical documentation The milling machine is in very good technical condition: spindle fully overhauled, guideways and ball screws in very good condition. The machine is connected to power – it can be inspected and tested on site by prior appointment. Professional loading is included in the price. Accessories, tooling and clamping devices shown in the photos are part of the offer only if listed under equipment. Technical data is for reference only and may contain inaccuracies. Subject to prior sale.

Condition: used, Year of construction: 2013, x-travel 635 mm y-travel 510 mm z-travel 460 mm control Sinumerik 840 D SL Siemens turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW tool taper SK 40 DIN 69871 max. Torque 83 / 57 Nm tension force 8 kN table surface area 790 x 560 mm number of T-slots 4 + 1 T-slot - distance 100 mm T-slot - width 4x 14H12 / 1x 14H7 mm max. table load 600 kg table height over floor 720 mm distance spindle nose and table 120 - 580 mm number of toolpositions 30 pos. Max. mould width 80 / (130) mm max. tool length 250 mm max. tool weight 6 kg max. total weight 80 kg change-time tool to tool 1,6 sec change-time chip to chip 6,0 sec rapid traverse 30 m/min feed speeds 1 - 20.000 mm/min Feed force max. 5 kN total power requirement 28 kVA Hodpfx Aloym Dz Rs Aju weight of the machine ca. 3,8 t dimensions of the machine ca. 3,5 x 4,0 x 2,7 m CNC - MachiningCenter Vertical DECKEL MAHO - DMC 635 V New Design - ShopMill - WITHOUT perforated plate - WITHOUT clamping device - WITHOUT tools

Condition: used, Year of construction: 2007, Technical details: x-travel: 635 mm y-travel: 460 mm z-travel: 510 mm control: 3D Heidenhain i TNC 530 table-size: 790 x 560 mm table load capacity: 600 kg tool taper: SK 40 Hjdpfow A I Uujx Al Aju Revolution per minute: 20 - 10.000 U/min. tool changer with: 20 place spindle hours: 36.050 h operating hours - idle run: 91.000 h total power requirement: 13,9 kW Weight approx.: 3,6 t tool taper: SK 40 Tool changer: 20-fach dimension machine approx.LxWxH: 3,0 x 2,0 x 2,15 m

Condition: good (used), Year of construction: 2001, functionality: fully functional, operating hours: 4,550 h, Controller SIEMENS SINUMERIK 810/840D Table size 800 x 500 mm Table load 500 kg X travel 630 mm Y travel 500 mm Z travel 500 mm Spindle speed 8000 rpm Tool holder type SK40 ATC magazin 24-fold Repid speed 30 m/min Weight 4500 kgs Dimensions LxWxH = 3100 x 2100 x 2400 mm Accessories - Coolant tank - Manuals The machine was used barely. Good condition. Hsdpfxey T I Ayo Al Asu

Condition: good (used), DMG DMC 63 V, serial number 2885-0725, 11,972 operating hours. Hedozqdlpjpfx Al Asu Available at the end of 2026.

Condition: good (used), Year of construction: 1998, operating hours: 13,143 h, functionality: fully functional, nominal power (apparent): 22 kVA, controller manufacturer: Siemens, controller model: Sinumerik, input voltage: 400 V, For sale is another CNC vertical machining center, a DECKEL MAHO DMC 63 V from 1998, used and in good condition, commensurate with its age. The machine is operational and can be inspected in person with power applied, by prior arrangement. • Year of manufacture: 1998 • Control system: Siemens Sinumerik Hodpfsz Dplfox Al Asu • 4th axis with clamping device • Tool magazine • Coolant system • Operating hours: approx. 13,143 hours in single-shift operation Mains voltage: 400 V Frequency: Hz Rated current: 17 A Apparent power: 22 kVA Auxiliary voltage: 230 V Control voltage: 24 V Type: DMC 63 V Serial number: A0883 Machine number: 999-d-076 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 28820005482, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, Equipment: documentation/manual, Dear Sir or Madam, We are selling a DMC 100 V hi-dyn machining center in good condition. Unfortunately, the year of manufacture is not written down, but we suspect it was 2001. Please see the pictures for further details; we are of course happy to answer any questions you may have. Hedpfevx N Shjx Al Aju The system can be viewed with power on. The buyer must organize collection with a suitable truck. The system can be dismantled and removed by either the buyer or us (for an additional fee of €1,500).

Condition: used, WE NEED SPACE: Direct from mold making: MACHINE LID MAHO DMC 70 V Control system Heidenhain TNC 426, manual control panel HR 410, X/Y/Z 700x550x500, spindle taper 40, 18000 rpm, tool changer with 30 positions, direct path measurement, internal coolant system 40 bar, enclosed cabin, Hodpfx Alezwdfvs Aeu chip conveyor, LTA emulsion mist extraction, year of manufacture 1999, only 14,400 spindle hours * Machine from the first owner, has only been used as a standby machine for some time, test runs and geometric measurements possible at any time. * Price ex works plus VAT, internal transport and loading included.

Condition: ready for operation (used), Year of construction: 2009, - USED - 3-AXIS VERTICAL MACHINING CENTRE   X-AXIS TRAVEL: 635 mm Y-AXIS TRAVEL: 510 mm Z-AXIS TRAVEL: 460 mm Hsdozlu S Njpfx Al Aou RAPID FEEDS X-Y-Z: 30 m/min SPINDLE: 10000 rpm; 9 - 13 kW; 57 - 83 Nm; SK-40 TABLE SIZE: 790 x 560 mm MAX ADMITTED LOAD: 600 Kg TOOL MAGAZINE: BASKET-TYPE ; 20 POS MAX TOOL DIAMETER: 80 (130) mm MAX TOOL LENGHT: 300 mm MAX TOOL WEIGHT: 6 Kg CONTROL UNIT: HEIDENHAIN iTNC 530 WEIGHT: 3650 Kg OVERALL DIMENSIONS: 3375 x 2440 x 2665 mm ACCESSORIES: SWARF CONVEYOR ; PORTABLE HANDWHEEL

Condition: used, Year of construction: 2007, x-travel 635 mm y-travel 510 mm z-travel 460 mm control iTNC 530 Heidenhain power capacity - main spindel 13 / 9 kW turning speed range - main spindle 20 - 10.000 min/-1 Torque 83 / 57 Nm tool taper SK 40 tension force 10 kN table surface area 790 x 560 mm number of T-slots 4 + 1 T-slot - width 4 x 14H12 / 1 x 14H7 mm T-slot - distance 100 mm max. table load 600 kg table height over floor 720 mm number of toolpositions 30 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6 kg Total weight, approx. max. 60 kg feed speeds max. 20.000 mm/min Feed force 5 kN input unit 0,01 mm rapid traverse 30 m/min total power requirement 20 kVA weight of the machine ca. 4,1 t dimensions of the machine ca. 4,5 x 4,0 x 2,8 m CNC-Machining Center Vertikal Hodpfx Aljyaci Hj Aou DECKEL MAHO - DMC 635 V - Spindle-Runtime only approx. 7.883h - Power-On approx. 23.023h

Condition: not inspected (used), operating hours: 28,461 h, functionality: unexamined, machine/vehicle number: 28850008692, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: SIEMENS SINUMERIK 810 D, table load: 500 kg, No minimum price – guaranteed sale to the highest bidder! The payment deadline is one week after purchase of the machine! Placing a bid obligates you to collect the machine on time between 17/11/2025 and 21/11/2025! TECHNICAL DETAILS Travel X-axis: 630 mm Travel Y-axis: 500 mm Travel Z-axis: 500 mm Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Feed rate X-axis: 0–30,000 mm/min Feed rate Y-axis: 0–30,000 mm/min Feed rate Z-axis: 0–30,000 mm/min Tool holder: SK 40 Number of tool positions: 24 Table width: 500 mm Table length: 800 mm Max. table load: 500 kg Loading height: 850 mm MACHINE DETAILS Control model: SIEMENS SINUMERIK 810 D Dimensions & Weight Dimensions (L x W x H): 3,000 x 2,400 x 2,400 mm Total weight: 8,000 kg Hedpfx Aloxm Tu Eo Aou Operating hours: 28,461 h

Condition: ready for operation (used), Year of construction: 2005, operating hours: 13,305 h, travel distance X-axis: 635 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 20, number of axes: 3, This 3-axis DECKEL MAHO DMC 635 V was manufactured in 2005. It features a HEIDENHAIN iTNC 530 control unit and a 20-position tool changer, providing efficient machining capabilities. With a machine hour count of 39,396 hours, this vertical machining centre represents an opportunity for high-quality machining tasks. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 635 V machine we have for sale. Contact us for further details. - Handwheel: Separate handwheel control- Machine Hours: 39,396 h - Programme Run Time: 13,305 h - Apparent Power: 20 kVA- Nominal Current: 28 A Jn max / 35 A- Voltage: 400 V / 230 V / 24 V- Frequency: 50 Hz- Known Defect: Fault with the clamping spring in the spindle- Not included: Chip Conveyor Hjdpfxsz Du S Rj Al Aou

Condition: excellent (used), Deckel Maho DMC 100V machining center CNC control: Heidenhain Hodpfjz Ehu Uox Al Asu Machine in good condition.

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical details x-travel 1040 mm y-travel 600 mm z-travel 500 mm Control Heidenhain iTNC 530 Hjdpfxjz D Aque Al Aju table surface area 1250 x 600 mm table load 600 kg tool taper SK 40 spindle turning speed range 1 - 8000 U/min max. torque on the spindle (S1/S6) 140/200 Nm feed range 40000 mm/min rapid power traverse in X-and Z direction 70 m/min rapid motion - y-axis 40 m/min spindle drive (100/40 % ED) 13/19 kW total power requirement 39 kVA weight of the machine ca. 8,9 t Additional information Operating hours 70294 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR Production package 2 Internal coolant supply through the spindle 20 bar Coolant system with paper belt filter Cooling device blown air through the spindle center selectable via M function Chip conveyor Bed flushing Linear drive in the X-axis Operating mode 4 Program check with extended manual intervention Machine documentation Transport dimensions: 4100 x 2500 x 3000 mm

Condition: ready for operation (used), Year of construction: 2003, operating hours: 6,276 h, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis DMG DECKEL MAHO DMC 63 V was manufactured in 2003. It features an X-axis travel of 630 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine is equipped with a Siemens 840D control unit and has a spindle speed of 10,000 rpm. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMC 63 V vertical machining centre we have for sale. Contact us for further details. Hjdpfozt N Sasx Al Aeu - Total Power On: 24,787 h- Spindle / Cutting Time: 6,276 h- Apparent Power: 30 kVA- Max Current (Jn max): 50 A- Rated Current: 45 A- Voltage: 400 V / 230 V / 24 V- Frequency: 50/60 Hz Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2007, operating hours: 32,000 h, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, Machine is being sold on behalf of the customer and can be inspected under power. Machine location: Czech Republic (Brno) Manufacturer: Deckel Maho Model: DMC 635V Year: 2007 Approx. 32,000 operating hours Control: Heidenhain iTNC 530 Spindle mounting: SK40 Speed: 10,000 rpm Travel (X/Y/Z): 635 / 510 / 460 mm Clamping surface (table): 790 x 560 mm 30-position tool changer + Blum laser tool measurement + Paper band filter / ICS 20 bar / 600 l + Chip conveyor Dimensions (approx.) LxWxH 260 x 390 x 240 cm Hedoylmdfopfx Al Asu Installation area 530 x 590 cm Weight: approx. 4,200 kg

Condition: used, Year of construction: 2004, Technical details: x-travel: 750 mm y-travel: 600 mm z-travel: 560 mm switched on hours: 78.328 h spindle hours: 38.073 h control: Heidenhain iTNC 530 tool changer with: 30 Plätze tool taper: HSK-A 63 feed speeds infinitely variable: 90 mm/min rapid traverse:: 90 m/min table-size: 950 x 650 mm table load capacity: 1000 kg Hsdpfx Aezp Dvrel Aeu total power requirement: 73 kVA Weight approx.: 11,0 t dimension machine approx.LxWxH: 4,9 x 4,3 x 3,15 m The DECKEL MAHO DMC 75 V linear is a highly precise vertical CNC machining center equipped with linear drive technology, making it ideal for 3-axis machining. *

Condition: excellent (used), Year of construction: 2016, operating hours: 3,752 h, functionality: fully functional, travel distance X-axis: 1,150 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 550 mm, rapid traverse X-axis: 42 m/min, rapid traverse Y-axis: 42 m/min, rapid traverse Z-axis: 42 m/min, controller manufacturer: Heidenhain, controller model: 640, rotational speed (max.): 20,000 rpm, overall weight: 9,650 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 20,000 rpm, operating hours of spindle: 1,615 h, coolant supply: 40 bar, spindle nose: SK40, number of slots in tool magazine: 120, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Machine in very good technical condition! Hodpfozaqz Dsx Al Asu

Condition: good (used), Year of construction: 2006, Parts shown by hand not come. Hjdezyakmjpfx Al Aou

Condition: ready for operation (used), Year of construction: 2003, operating hours: 14,085 h, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis DECKEL MAHO DMC 65 V was manufactured in 2003. It features a spindle speed of 18,000 rpm and a tool changer capacity of 30 positions, enhancing its operational efficiency. The machine is equipped with a Heidenhain TNC 426 control system and optional equipment such as tool measurement and an automatic 3D probe. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 65 V vertical machining centre we have for sale. Contact us for further details. - Optional Equipment: Tool measurement, Automatic 3D probe, Chip conveyor, External cooling system- Operating Hours (Power-on / Program Run): 52,067 h / 14,085 h- Electrical Connection: 230V / 1A (Auxiliary)- Known Defects: Sensor for control cabinet ventilation does not always turn on; spindle collet seizes after ~3 weeks of inactivity (loosens after ~200 cycles of clamping/releasing, works flawlessly in continuous operation) Hjdpfx Aszza Eaol Aou

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,040 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: TNC 530, workpiece weight (max.): 800 kg, total height: 2,800 mm, total length: 4,060 mm, total width: 2,450 mm, table width: 600 mm, table length: 1,250 mm, table load: 800 kg, overall weight: 8,800 kg, spindle speed (max.): 18,000 rpm, spindle nose: SK 40, number of slots in tool magazine: 30, Equipment: documentation/manual, oil mist separator, The machine is in very good condition, with an accuracy of 3/100. The spindle was replaced in 2017. It has had one owner and has undergone regular maintenance. It will be available in the last week of October, and the price includes loading and technical documentation. It features air conditioning for the electrical cabinet and spindle temperature control. Inspection or re-measurement can be arranged upon request. Hjdpfx Aezy D Hlsl Aeu

Condition: used, Year of construction: 2001, x-travel 1000 mm y-travel 800 mm z-travel 500 mm control Siemens 611 Hodpjztfx Asfx Al Aju

Condition: used, Year of construction: 2011, x-travel 835 mm y-travel 510 mm z-travel 510 mm distance spindle nose and table 120 - 630 mm control iTNC 530 ERGOLine Heidenhain turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW tool taper SK 40 DIN 69871 max. Torque 130 / 87 Nm table surface area 1.000 x 560 mm max. table load 800 kg Hjdjx R Em Dopfx Al Aeu number of T-slots 5 T-slot - width 14 mm T-slot - distance 100 mm number of toolpositions 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 250 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 30 m/min feed speeds 1 - 20.000 mm/min total power requirement 23 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m CNC - MachiningCenter Vertical DECKEL MAHO - DMC 835 V New Design - 20,796h operating hours, 7,544h spindle hours

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 8,000 rpm, spindle motor power: 13,000 W, number of slots in tool magazine: 20, number of axes: 3, This 3-axis DECKEL MAHO DMC 1035 V was manufactured in 2007. It features an X-axis travel of 1,035 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine is equipped with a tool changer that holds 20 positions and operates at a spindle speed of 20–8,000 rpm. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 1035 V vertical machining centre we have for sale. Contact us for further details. • Control: Heidenhain iTNC 530, 3D-Path / 3D-Contouring Hsdpfszv Syljx Al Aeu • Rapid traverse: 30 m/min • Main drive: AC 13/9 kW • Tool taper: ISO 40 / SK40 DIN 69871 • Tool clamping: DIN 69872 • Tool changer: 20 positions, SK40, double gripper • Table size: 1,200 × 560 mm • Measuring system: Direct measuring system X/Y/Z with air purge • Coolant / air blast: Switchable via M-function at spindle nozzles • Operation mode: Process monitoring with manual intervention • Software: Smart TNC incl. DZF and engraving cycle • Data communication: DMG Netservice Euro ISDN • Operating hours: 24,915.5 h (control ON) / 12,002.7 h (spindle ON) Technical Specification Taper Size ISO 40