Used Deckel Maho Dmu 50 Eco for sale (357)

Condition: ready for operation (used), Year of construction: 2014, operating hours: 38,800 h, functionality: fully functional, machine/vehicle number: 11415594804, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, controller model: Heidenhain iTNC 530, table load: 300 kg, TECHNICAL DETAILS Travel X-Axis: 500 mm Travel Y-Axis: 450 mm Travel Z-Axis: 400 mm Clamping surface: Ø 630 x 500 mm Swivel range: -5/+110 degrees Table load: 300 kg Speed: 10,000 rpm Spindle drive: 13 kW Tool magazine capacity: 60 Tool holder: SK 40 MACHINE DETAILS Control: Heidenhain iTNC 530 Operating hours Power-on hours: approx. 65,300 h Spindle hours: approx. 38,800 h Machine weight: 4,850 kg EQUIPMENT ECO Tower 60 by Lang NC swivel rotary table C+B axis 3D probe Renishaw Chip conveyor Bedsycuztopfx Aa Nold Paper belt filter coolant tank 600 l Internal coolant supply 20 bar Electronic handwheel Documentation

Condition: good (used), Year of construction: 2005, functionality: fully functional, operating hours: 84,564 h, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, number of slots in tool magazine: 16, controller manufacturer: iTNC 530 Heidenhain, total height: 2,500 mm, total length: 3,000 mm, total width: 3,000 mm, table length: 650 mm, table width: 500 mm, controller model: iTNC 530 Heidenhain, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, spindle motor power: 13,000 W, nominal power (apparent): 17 kVA, rapid traverse Z-axis: 12 m/min, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, spindle speed (max.): 10,000 rpm, spindle speed (min.): 20 rpm, table load: 200 kg, tool diameter: 130 mm, tool length: 300 mm, tool weight: 6 g, operating hours of spindle: 22,855 h, Equipment: rotational speed infinitely variable, The machine is in good condition. A few things have been redone and freshened up. The following has been overhauled: -Complete X-axis bearing including ball screw and bearing -Various hydraulic components -Tool changer reset and sensors replaced -New door switch installed -New discs installed (unfortunately already got some flying chips again) Bljdpfxjvtnm He Aa Ned -New coolant pump -New screen, as it was defective -New handwheel HR410 The machine does not have many spindle hours or switch-on hours. The machine has never seen a series production and has always been operated sensibly. Warm-up programs etc. We are tool and mold makers, so we tend to do more complex contours rather than heavy machining. I am only selling this because I need a simultaneous machine and also more travel paths. Technical data: Year of manufacture 2005 x-travel 500 mm y-travel 450 mm z-travel 400 mm Control iTNC 530 Heidenhain Main spindle Speed range - main spindle 20 - 10,000 rpm Drive power - main spindle 9 / 13 kW Torque 57 / 82 Nm Tool holder SK 40 Rotary table Table clamping area 630 x 500 mm Swivel range -5 / +110 ° Max. table load 200 kg T-slots 14 H7 T-slots - distance 63 mm C-axis +/- 360 ° Feeds: Rapid traverse (X / Y / Z) 12 m/min Feed rate 10,000 mm/min Tool changer: Tool positions 16 pos. Max. tool weight 6 kg Max. tool length 300 mm Max. tool diameter 80 mm Max. tool diameter with free adjacent box 130 mm Tool holder SK 40 Total power requirement 17 kVA Machine weight approx. 3.6 t Space requirement approx. 3.0 x 3.0 x 2.5 m Tool milling machine - Universal DECKEL MAHO - DMU 50 Attention: no chip conveyor and no automatic measuring probe! - 5 axes (3+2) - WITHOUT tools Attached are pictures of the machine. The machine was intentionally not cleaned before taking the pictures, so it is in the "chip" and is used daily. You can also see the hours of the machine there. Kinematics and geometry are OK. for our needs, but could possibly be re-measured. We have never had any crashes etc.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, spindle speed (max.): 4,500 rpm, Equipment: rotational speed infinitely variable, Dear Sir or Madam, For sale is a 3+2-axis CNC machining center, type Deckel Maho DMU50M. The Heidenhain TNC310 contouring control (also available with Siemens 810D!) makes the DMU a fully-fledged CNC machine for both production and training applications. Due to the absence of a tool changer and the conveniently positioned maintenance doors, the DMU50M requires very little space and can be positioned almost directly against a wall. The machine has been thoroughly tested in our workshop, is therefore in excellent condition, and is ready for immediate use. We look forward to receiving your inquiry! Delivery time: immediately available Machine no. xxxx Year of manufacture: 2002 Control: Heidenhain TNC310 or Siemens 810D (including Shopmill) Table design: Rotary and tilting table Speed: 20-4500 rpm, continuously programmable Feed rate: 0-5000 mm/min, continuously programmable Travel ranges X/Y/Z: 500/400/400 mm Tool holder: SK40 Tightening system: pneumatic Handwheels: 3-axis electronic / B+C axes mechanical Weight: approx. 2800 kg Further equipment and accessories: upon request Our service promise to you: - We are a certified master machine shop - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance Bedpfx Asv Sy Sfea Nold - Upon request, we can completely or partially overhaul the selected machine - About the paint color of the selected machine You can decide freely. - If you wish, you can order additional accessories such as tools, etc. directly. - If you wish, we can install additional accessories such as safety devices, etc. - We are happy to take care of shipping and/or installation.

Condition: ready for operation (used), Year of construction: 2001, - USED - 5-AXIS VERTICAL MACHINING CENTRE WITH ROTARY AND TILTING TABLE X-AXIS TRAVEL: 500 mm Y-AXIS TRAVEL: 400 mm Z-AXIS TRAVEL: 400 mm SPINDLE: 9000 rpm; 13 kW; HSK 63 B-AXIS: -10° +95 ° C-AXIS: 360 ° TABLE SIZE: 700 x 500 mm MAX ADMITTED LOAD: 200 Kg TOOL MAGAZINE: CHAIN-TYPE ; 16 POS CONTROL UNIT: HEIDENHAIN WEIGHT: 3000 Kg OVERALL DIMENSIONS: 2000 x 1520 x 2140 mm ACCESSORIES: SWARF CONVEYOR Bledpswl R Dqjfx Aa Nod NOTE: MANUAL 5th AXIS

Condition: ready for operation (used), Year of construction: 2004, operating hours: 17,500 h, functionality: fully functional, travel distance X-axis: 830 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller model: Heidenhain 530 (MC422), rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 830 mm Travel Y-axis: 630 mm Travel Z-axis: 630 mm Feed rates: 15,000 mm/min Rapid traverse: 30,000 mm/min Motor spindle: 12,000 rpm Number of tool stations: 32 MACHINE DETAILS Bedjymn Saopfx Aa Njld Control: Heidenhain 530 (MC422) Weight: approx. 9,000 kg Spindle hours: approx. 17,500 EQUIPMENT Through-spindle coolant (IKZ) Chip conveyor Electronic handwheel Blum laser Flushing device Filtration system Note: The measuring probe is not included in the scope of delivery.

Condition: like new (used), Year of construction: 2001, operating hours: 10,356 h, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, nominal power (apparent): 44 kVA, controller manufacturer: Heidenhain TNC 430, workpiece weight (max.): 5,000 kg, total height: 4,200 mm, total length: 7,900 mm, total width: 8,800 mm, spindle speed (min.): 10,000 rpm, Year of construction: 2001 CNC controller: Heidenhain TNC 430 Axes X-axis travel mm: 1800 Y-axis travel mm: 2000 Z-axis travel mm: 1100 Bsdpfsyq Rpcjx Aa Nold C-axis degrees: 360º (0,001) B-axis degrees: -7/+187º Feed rates m/min: 60/40/40 Rapid traverse m/min: 60/40/40 Milling/turning table nc: Table dimensions mm: Ø1700x1400 Max. workpiece weight kg: 5000 Table rotation speed rpm: 200 Spindle Spindle speed rpm: 10000 Spindle drive power kW: 44/32(40%ED/cont) Spindle torque Nm: 288/187 (40/100%ED) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 900 Tool system Tool holder: HSK-A 100 Tool magazine slots: 60 Tool changer: Double gripper Chip-to-chip time s: 13.5 Equipment Electronic Handwheel Chip conveyor Infrared probe Internal cooling lubricant supply Rotating inspection windows Rinsing gun Operating mode 4 Tool breakage probe Machine running times Under power: 10356 Spindle Working: 6223 Basic machine dimensions / weight Length mm: 7900 Width mm: 8800 Height mm: 4200

Condition: like new (used), Year of construction: 2006, operating hours: 51,775 h, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, nominal power (apparent): 44 kVA, controller manufacturer: Heidenhain iTNC 530, workpiece weight (max.): 4,000 kg, total height: 3,500 mm, total length: 7,500 mm, total width: 7,700 mm, table length: 1,500 mm, overall weight: 35,000 kg, spindle speed (min.): 10,000 rpm, Year of construction: 2006 Bsdpfsyq Rm Isx Aa Nold CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 1600 Y-axis travel mm: 1250 Z-axis travel mm: 1000 C-axis degrees: 360º (0,001) B-axis degrees: 0-190º Feed rates m/min: 60 Rapid traverse m/min: 60 Milling/turning table nc: Table dimensions mm: Ø1500x1250 Max. workpiece weight kg: 4000 Table rotation speed rpm: 10 Spindle Spindle speed rpm: 10000 Spindle drive power kW: 44/32 (40/100%ED) Spindle torque Nm: 288/187 (40/100%ED) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 980 Tool system Tool holder: HSK-A 100 Tool magazine slots: 60 Tool changer: Double gripper With free neighboring places mm: 250 With occupied neighboring places mm: 130 Max. Tool Length mm: 650 Max tool weight kg: 30 Chip-to-chip time s: 6 Equipment Chip conveyor Infrared probe Rotating inspection windows Rinsing gun Operating mode 4 blowing air through spindle center selectable via M-function Machine running times Under power: 98398 Spindle Working: 51775 Rated power kVA: 96.2 Basic machine dimensions / weight Length mm: 7500 Width mm: 7700 Height mm: 3500 Weight kg: 35000

Condition: used, Year of construction: 2002, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale DECKEL MAHO DMU 100 T machining centre – 5 continuous axes: Description: CNC vertical machining centre with 5 simultaneous axes, designed for complex precision parts machining (mould making, aerospace, automotive, etc.). Technical specifications: - Model: Deckel Maho DMU 100 T - CNC control: Heidenhain iTNC 530 - Axes: X / Y / Z + B rotation + A rotation (simultaneous 5-axis machining) Bljdpfoyc Tzlox Aa Nod Axis travels: - X-axis: approx. 1050–1150 mm - Y-axis: approx. 710–750 mm - Z-axis: approx. 710 mm Spindle and tooling: - Spindle speed: Up to 18,000 rpm - Spindle power: approx. 28 kW - Tool mounting: SK 40 - Tool magazine: 32 positions Table and capacity: - Type: Integrated NC rotary table - Dimensions: approx. 800 x 800 mm - Max load: 500–800 kg Dimensions and weight: - Machine weight: approx. 9,500–10,000 kg - Dimensions: approx. 3500 x 2500 x 3000 mm (L x W x H) I remain at your disposal for any further information.

Condition: used, Year of construction: 2003, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Machining Center Deckel Maho 5-Axis Simultaneous Type: DMU 70 Evolution Bodpfoypb Rnex Aa Njld Year: 2003 CNC Heidenhain iTNC 530 With Erowa Robot 3R System Sold Complete With Tooling With Documentation With Chip Conveyor

Condition: used, Year of construction: 2007, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Deckel Maho Machining Center 5-Axis Simultaneous Type DMU 70 Evolution Year 2007 CNC Heidenhain iTNC 530 Sold complete With tooling Bsdsypb N Dspfx Aa Nsld With documentation With chip conveyor

Condition: good (used), Year of construction: 2003, travel distance X-axis: 1,060 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, feed rate X-axis: 15,000 m/min, feed rate Y-axis: 15,000 m/min, feed rate Z-axis: 15,000 m/min, total height: 2,800 mm, total length: 3,200 mm, total width: 2,900 mm, table width: 800 mm, table length: 1,500 mm, table load: 550 kg, rotary table diameter: 800 mm, spindle motor power: 20,000 W, Chip conveyor 3D measuring probe Bodeym Sdyopfx Aa Nsld Paper filtration IKZ 15 Bar Under power X - Travel: 1060mm Y - Travel: 710mm Z - Travel: 710mm A - Axis: 360000° B - Axis: - 30 to + 120° Table Length: 1500mm Table Width: 800mm Table load: 550 Table Ø: 800mm Feed rate X-Axis: 15000mm/min. Feed rate Y-Axis: 15000mm/min. Feed rate Z-Axis: 15000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 20kW Speeds / ranges: 12000Rpm ATC / revolver: 32 Coolant through spindle / Bar:15 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 3200mm Width: 2900mm Height: 2800mm Weight: 9500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2002, Deckel Maho DMU 80 P-Hi Dyn 5-Axis CNC Machining Center Year of manufacture: 2002 Control: Heidenhain 430 X-axis travel: 800 mm Y-axis travel: 700 mm Z-axis travel: 600 mm B-Axis: Automatic swivel milling head C-Axis: NC rotary table: 900x630 mm Workpiece weight: 800 kg Bedpfxex Dlf Ro Aa Njld Tool holder: SK40 Tool changer: 60 positions Accessories: Chip conveyor High-pressure coolant 40 bar (IKZ) Handwheel Heidenhain TS 642 probe

Condition: used, Year of construction: 2001, x-travel 880 mm y-travel 630 mm z-travel 630 mm Control Heidemhain type 426/430 spindle speed: 18000 spindle taper HSK 63 surface area 1250x700 mm Rotary table 700 mm Table load 1000 kg b-axis Schwenkopf 0,001 ° c-axis 0-360° Rundtisch 0 B-axis C-axis Air blow through the spindle HSK 63 Electronic handwheel The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Bedpfsyqukdjx Aa Njld We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 15025703124, Used 5-axis machining centre with double table Manufacturer: DECKEL MAHO Model: DMU 70VL Year of manufacture: 2001 Bsdeyk S Hpspfx Aa Neld

Condition: ready for operation (used), Year of construction: 1996, operating hours: 23,198 h, controller model: Millplus V400, number of axes: 3, This 3-axis DECKEL MAHO DMU 60T was manufactured in 1996. It features a 24-position tool changer, an NC rotary table, and a spindle speed up to 6300 rpm. The working areas are 600 mm in length, 525 mm in width, and 500 mm in height. It includes a coolant system with a 150-liter capacity. Consider the opportunity to buy this DECKEL MAHO DMU 60T vertical machining centre. Contact us for more information about this machine. Control & Electrical • Control: Millplus V400 • Screen: Color, text in German/English • Operating Voltage: 400 V, 50 Hz • Control Voltage: 24 V • Drive: Digital with overload protectionSpindle & Tooling • Spindle: With quill • Maximum Spindle Speed: 6,300 rpm (speed range with gearbox: 20–6,300 rpm) • Tool Holder: ISO 40 – DIN 69871 • Pull Stud: DIN 69872 Form A • Tool Changer: 24–25 tool positionsWorking Area & Movement • Longitudinal (X) Travel: 600 mm • Cross (Y) Travel: 525 mm • Vertical (Z) Travel: 500 mm • Rapid Traverse X/Y/Z: 18 m/min Blodjx D Nalepfx Aa Njd • Feed Rate: Up to 10,000 mm/min • NC Rotary Table: 3-axis on fixed tableCooling & Accessories • Coolant System Capacity: 150 L • Full Enclosure: Yes • Paint: Gray / Green (NCS)Documentation • 2 sets, GermanThe machine has a 4-axis C-axis (dividing head)

Condition: good (used), Year of construction: 2000, Ref. -No.: 10468 Manufacturer: DECKEL MAHO Type: DMU 80 Year of construction: 2000 Control: Heidenhain Millplus Storage location: Halberstadt Country of origin: Japan Machine-No.: 111xxxxx X-Travel: 800 mm Y-Travel: 700 mm Bsdpfsym Nb Ajx Aa Nsld Z-Travel: 600 mm Number of T-slots: 9 / 14 Clamping Area: Ø 900 x 630 mm T - slot spacing: 63 mm Tool Taper: SK 40 Tool changer: 30 Spindle Speed: 12.000 RPM Max. Torque: 2659 Nm Operating hours: 67.452 H Center hole: Ø 50 mm Holding torque: 4500 Nm Max. rotation of the table top: 10,7 rpm Feed: 3600 °/min. Resolution of the measuring system: 0,001 ° NC rotary table: 800 kg NC swivel rotary table: 600 kg Further information: - Clamping table 900 x 630 mm - Chip conveyor, sheet metal technology - Belt filter system, manufacturer Interlit - Type SK 200-760 - Oil mist separator - Set of tool holders, - Workbenches - 2x 6 drawers - Vise - Jaw width 125 mm - Roller shutter cabinet with 1 door The machine can be viewed under power by arrangement.

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, controller manufacturer: SIEMENS, spindle speed (max.): 24,000 rpm, spindle motor power: 35,000 W, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 70 EVO Linear was manufactured in 2009. It features a working area with X-axis travel of 750 mm, Y-axis travel of 600 mm, and Z-axis travel of 520 mm. The machine is equipped with a high-speed spindle capable of reaching 24,000 rpm and a tool magazine with a capacity of 120 positions. It includes a DMG PH 150 L8 automation. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMU 70 EVO Linear machine we have for sale. Contact us for further details. • Feed rates: linear 20,000 mm/min; rapid traverse 50,000 mm/min • Table: clamping surface 700 × 500 mm • Tool magazine: 120 positions • Through-spindle coolant: high-pressure 40 bar • Documentation: instruction manuals and CE declaration Additional equipment • Coolant tank with paper filter, 600 L • Measuring probe • Chip conveyor • Electronic handwheel (remote) Bodpoymcvmjfx Aa Nsld • Pallet changer system DMG PH 150 L8, 8 stations (pallets not included) Technical Specification Taper Size HSK 63

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 2,050 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, rotational speed (max.): 12,000 rpm, CNC control Heidenhain TNC 430 32-fold tool changer Bsdpeu Hf Ryefx Aa Nold coolant device 2x chip conveyor measuring feeler The hole X-axis travel is 2050mm. You can work in one move 2 meters. A dividing wall is also with the machine. Then the X-travel will be split. Technische Daten / technical details: X-Weg / X-travel 2050 mm Y-Weg / Y-travel 520 mm Z-Weg / Z-travel 520 mm Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 12000 UpM /rpm Werkzeugwechselmagazinplätze / number of tool places in changer 2x 32 Antriebleistung Spindel / drive capacity spindle 36 kW Gewicht ca. / weight 12800 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Year of construction: 2004, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, rotary table diameter: 1,500 mm, spindle speed (min.): 18,000 rpm, spindle speed (max.): 18,000 rpm, Heidenhain iTNC 530 control Bjdow Ngk Hopfx Aa Neld Tool changer for 60 tools Automatic head 180/-7° stepless

Condition: used, CNC 3+2 axis vertical machining center DECKEL MAHO type DMU 35 M CNC control SIEMENS 810D with ShopMill Manufacturer no. 11065353554 Year of manufacture 2001 Travel paths: X: 350 mm, Y: 240 mm, Z: 340 mm Table movements: C-axis: 360° Swivel range: +105° / -15° Universal swivel - rotary table: 400 x 290 mm, center hole 30H6 Table load: max. 100 kg Distance spindle nose - table: min. 145 mm to max. 485 mm Feed rate: 5,000 mm/min Rapid traverse (X / Y / Z): 5 m/min Input resolution: 0.01 mm Total power requirement: 15 kVA Speed range - main spindle: 20 - 6,300 min/-1 Drive power - main spindle: 6.3 / 10 kW (100% / 40% ED) Torque: max. 55 / 80 Nm Tool holder: SK 40 DIN 69871 Pull bolt: DIN 69872 or ISO 7388/2 Type B Interface: Serial RS232C, LAN (RJ45) Power connection: 400 volts, 50 Hz, 15 kVA Compressed air connection: 6 bar - CNC control Siemens Sinumerik 810D with ShopMill V05.03.22, NCU 03.03.34-CCU1E, MMC103 - 3-axis controlled (X, Y and Z axis) - Manual swivel rotary table, C axis = table rotation 360°, B-axis = swivel range +105°/ -15° - direct path measuring system for all 5 axes - electronic handwheel - spindle drive via servo motor with toothed belt and 2 gear stages - fully protected cabin with sliding door - swiveling control panel Bjdpevt D D Ujfx Aa Njld - coolant nozzles on the vertical head - chip tray with coolant container and cooling lubricant pump - work area lighting - documentation available space requirement L x W x H 2000 x 2000 x 2100 mm weight 1750 kg good condition

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 15025702504, travel distance X-axis: 2,350 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 21 kVA, controller manufacturer: HEIDENHAIN, total height: 2,800 mm, total length: 9,000 mm, total width: 3,200 mm, table width: 500 mm, table length: 700 mm, table load: 310 kg, overall weight: 15,000 kg, spindle speed (max.): 12,000 rpm, mount diameter: 40 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, control voltage: 220 V, Equipment: chip conveyor, documentation/manual, DECKEL MAHO DMU 70 VL Universal Machining Center - Tool holder: SK 40 - Input increment X/Y/Z: 0.01 mm - Jog mode X/Y/Z: 20 - 2000 mm/min - Linear scale resolution X/Y/Z: 0.001 mm - Position tolerance in X/Y/Z: 0.010 mm - Working area travel X-Axis (without partition): 2350 mm, with partition: 2 x 710 mm - incl. tool changer, 2 x 32 positions - max. tool length from spindle nose: 315 mm - max. tool weight for automatic tool change: 6 kg - max. total tool weight in magazine: 80 kg - required compressed air: approx. 5.5 - 8 bar Worktables: - NC rotary table, 700 x 500 mm - with swivel axis - T-slot spacing: 63 mm - max. table rotation speed: 16.73 rpm - swiveling speed: 14.73 rpm - swivel range: 0 to 180° - input/display increment: 0.001° - weight: approx. 310 kg - one fixed table - dimensions: 1000 x 600 mm Bodpoym Smbofx Aa Neld - T-slot spacing: 63 mm - number of T-slots: 9/14 H7 - incl. chip conveyor and coolant system Note: the machine can be transported on a truck with up to 2800 mm width! Note: The item must be collected between 21.04. and 30.04.2026 at a yet-to-be-agreed date. FCA D-96257 Marktgraitz – loaded onto truck

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 15025704014, travel distance X-axis: 2,350 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 41 kVA, controller manufacturer: HEIDENHAIN, controller model: TNC 426, total height: 2,800 mm, total length: 9,000 mm, total width: 3,200 mm, spindle speed (max.): 18,000 rpm, tool diameter: 40 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DECKEL MAHO DMU 70 VL Universal Machining Center - Operating voltage: 400 V - Frequency: 50 Hz - Connected load: 41 kVA - Rated current: 80 A - Tool holder: HSK 63 - Input increment X/Y/Z: 0.01 mm - Setup mode X/Y/Z: 20 - 2000 mm/min - Linear encoder resolution X/Y/Z: 0.001 mm - Position tolerance in X/Y/Z: 0.010 mm - Working area travel X-axis (without dividing wall): 2350 mm, with dividing wall: 2 x 710 mm - including tool changer 2 x 32 positions - Max. tool length from spindle nose: 150 mm - Required compressed air: approx. 5.5 - 8 bar - Work tables: 2 x NC rotary table, 700 x 500 mm - with swivel axis - T-slot spacing: 63 mm - Swivel range: 0 to 180° - Input and display increment: 0.001° - Weight: approx. 310 kg Blodpfx Aajym Sd Tj Nod - Including all tool holders visible on the photos in the tool changer, as well as chip conveyor and coolant system - Note: The clamping systems on the fixture tables are not included in the scope of delivery. Important: The machine can be transported on a truck up to 2800 mm width! Important: The item must be collected between 21.04. and 30.04.2026 on a binding date to be agreed upon in advance. FCA D-96257 Marktgraitz – loaded onto truck

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 71.255396, travel distance X-axis: 600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, controller model: MILLPLUS, total height: 2,700 mm, total length: 6,000 mm, total width: 4,000 mm, table width: 630 mm, table length: 900 mm, overall weight: 10,000 kg, number of slots in tool magazine: 30, mount diameter: 40 mm, Equipment: chip conveyor, DECKEL MAHO DMU 80 P Universal Machining Center - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 80 A Bjdpfx Aaeym Rk So Neld - Table with 9 T-slots - Tool holder: SK 40 The machine is equipped with a 30-position tool changer, including the tool holders visible in the photos within the tool changer, as well as chip conveyor and coolant system. Note: The machine vice shown on the clamping surface is not included in the scope of delivery! Note: The item must be collected between 21/04 and 30/04/2026 at a bindingly agreed appointment. FCA D-96257 Marktgraitz – loaded onto truck

Condition: like new (used), Year of construction: 2000, operating hours: 33,831 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, controller model: '3D contouring control Millplus, workpiece weight (max.): 1,000 kg, total length: 7,000 mm, total width: 3,500 mm, overall weight: 3,902 kg, spindle speed (min.): 18,000 rpm, spindle motor power: 15,000 W, Year of construction: 2000 CNC controller: '3D contouring control Millplus Axes X-axis travel mm: 1250 Y-axis travel mm: 880 Z-axis travel mm: 800 C-axis degrees: 360º (0,001) Feed rates m/min: 40 Rapid traverse m/min: 40 Milling/turning table nc: Number of pallets: 1 Table dimensions mm: Ø1000 Max. workpiece weight kg: 1000 max. torque Nm: 7900 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 15/10 (40%ED/cont) Cooling Tank capacity: 600 Tool system Tool holder: CAT 40 Tool magazine slots: 60 Tool changer: Doeble gripper Equipment Bljdpfx Aaexvrbio Njd Electronic Handwheel Chip conveyor Internal cooling lubricant supply Rotating inspection windows Rinsing gun Preapared for RENISHAW sonde Accuracy package Ready for internal cooling (40/80 bar) Paper band filter Machine running times Under power: 33831 Spindle Working: 6328 Rated power kVA: 55 Basic machine dimensions / weight Length mm: 7000 Width mm: 3500 Height mm: 3902

Condition: excellent (used), Year of construction: 2004, operating hours: 60,477 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller manufacturer: Heidenhain iTNC 530, controller model: iTNC 530, workpiece weight (max.): 800 kg, total height: 3,000 mm, total length: 3,500 mm, total width: 2,500 mm, table width: 800 mm, table length: 800 mm, overall weight: 9,600 kg, spindle speed (min.): 18,000 rpm, Year of construction: 2005 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 1050 Y-axis travel mm: 710 Z-axis travel mm: 710 B-axis degrees: 103º Feed rates m/min: 30 Rapid traverse m/min: 30 Milling/turning table nc: Number of pallets: 1 Table dimensions mm: Ø800 Max. workpiece weight kg: 800 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 28 (40%) Blodpfx Aasx Arcaj Nod Spindle torque Nm: 121 Tool system Tool holder: SK 40 Tool magazine slots: 32 Tool changer: Pick-up Chip-to-chip time s: 14 Equipment Rigid table with integrated rotary table Swivel head Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Tool measuring arm Internal coolant supply Machine running times Under power: 151446 Spindle Working: 60477 Basic machine dimensions / weight Length mm: 3500 Width mm: 2500 Height mm: 3000 Weight kg: 9600