Used Deckel Maho Dmu 50 T for sale (339)

Condition: good (used), Year of construction: 2005, operating hours: 84,564 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 17 kVA, controller manufacturer: iTNC 530 Heidenhain, controller model: iTNC 530 Heidenhain, total height: 2,500 mm, total length: 3,000 mm, total width: 3,000 mm, table width: 500 mm, table length: 650 mm, table load: 200 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 22,855 h, spindle motor power: 13,000 W, number of slots in tool magazine: 16, tool length: 300 mm, tool diameter: 130 mm, tool weight: 6 g, Equipment: rotational speed infinitely variable, The machine is in good condition. A few things have been redone and freshened up. The following has been overhauled: -Complete X-axis bearing including ball screw and bearing -Various hydraulic components -Tool changer reset and sensors replaced -New door switch installed -New discs installed (unfortunately already got some flying chips again) -New coolant pump -New screen, as it was defective -New handwheel HR410 The machine does not have many spindle hours or switch-on hours. The machine has never seen a series production and has always been operated sensibly. Warm-up programs etc. We are tool and mold makers, so we tend to do more complex contours rather than heavy machining. I am only selling this because I need a simultaneous machine and also more travel paths. Technical data: Year of manufacture 2005 x-travel 500 mm y-travel 450 mm z-travel 400 mm Control iTNC 530 Heidenhain Main spindle Speed range - main spindle 20 - 10,000 rpm Drive power - main spindle 9 / 13 kW Torque 57 / 82 Nm Tool holder SK 40 Rotary table Table clamping area 630 x 500 mm Prjdpfx Aevtnm Heh Ajc Swivel range -5 / +110 ° Max. table load 200 kg T-slots 14 H7 T-slots - distance 63 mm C-axis +/- 360 ° Feeds: Rapid traverse (X / Y / Z) 12 m/min Feed rate 10,000 mm/min Tool changer: Tool positions 16 pos. Max. tool weight 6 kg Max. tool length 300 mm Max. tool diameter 80 mm Max. tool diameter with free adjacent box 130 mm Tool holder SK 40 Total power requirement 17 kVA Machine weight approx. 3.6 t Space requirement approx. 3.0 x 3.0 x 2.5 m Tool milling machine - Universal DECKEL MAHO - DMU 50 Attention: no chip conveyor and no automatic measuring probe! - 5 axes (3+2) - WITHOUT tools Attached are pictures of the machine. The machine was intentionally not cleaned before taking the pictures, so it is in the "chip" and is used daily. You can also see the hours of the machine there. Kinematics and geometry are OK. for our needs, but could possibly be re-measured. We have never had any crashes etc.

Condition: excellent (used), Year of construction: 2001, Deckel Maho DMU50 Evolution Control: Heidenhain iTNC530 Year: 2001 x-travel 500 mm y-travel 420 mm z-travel 380 mm control iTNC 530 Heidenhain Pjdjxggl Djpfx Ah Asrc power capacity - main spindel 25 / 35 kW turning speeds 20 - 18.000 U/min Torque (40 / 100%) 130 / 87 Nm tool taper HSK 63 Feed speed 20.000 mm/min rapid traverse X-axis 50 m/min rapid traverse Y-axis 50 m/min rapid traverse Z-axis 50 m/min tools in tool magazin 100 positions max. tool length 200 mm max. tool weight 6 kg max. tool diameter 50 mm surface area 500 x 380 mm center bore 30 H6 T-slot - distance 63 - 14H7 mm swivelling range 0° / +180° (B-Achse) swivelling range 360° / 0,001° (C-Achse) max. table load 200 kg Rapids C - Axes 33 min -1 rapid traverse B-axis 26 min -1 total power requirement 38 kVA weight of the machine ca. 6,0 t Accessories/options: - Blum tool measuring system - Swarf conveyor - Through spindle coolant - Documentations Under power in our warehouse!

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, DECKEL MAHO DMU 80P General Data Measurements width 3400 mm Measurements depth 2200 mm Measurements height 2400 mm Machine weight 12000 kg Main Drive Number of spindles 1 Spindle speed range 18000 rpm Spindle motor power 10 kW Tool taper SK 40 Number of axis 5 Movement Unfpvoddib X-Axis Movement 800 mm Y-Axis Movement 700 mm Z-Axis Movement 600 mm Table Outer length 800 mm Outer width 700 mm Pedsvbg Sqepfx Ah Aorc C-axe (table) simultaneous 0-360° B-axe swivel head two position vertical or horizontal (not simultaneous) Machine have new spindle was replaced in 2019. we include 30 tools sk40 Application Types Milling

Condition: used, Universal Machining Center Machine type: DMG Deckel Maho DMC 340 U Control: Heidenhain iTNC 530 Year of manufacture: 2002 TECHNICAL DATA: Travel: X-axis: 2,800 mm Y-axis: 3,400 mm Z-axis: 1,600 mm B-axis C-axis Rapid traverse: (X/Y/Z): 60 / 30 / 40 m/min. Swivel head Speed range: 10,000 rpm Drive power: 44/32 kW Torque: 288 Nm Tool holder: HSK 100 Tool positions: 120 Tool diameter: 130 / 250 mm Tool length: 650 mm Prjdpfswa Aihex Ah Aec Tool weight: 30 kg NC rotary table: 2500 x 2000 Pallet system Number of pallets: 2 Pallet size: 2500 x 2000 mm Top table: 2800 mm diameter Features: Internal cooling (IKZ): bar Coolant tank: l Chip conveyor Electronic handwheel Chip flushing gun

Condition: like new (used), Year of construction: 2012, operating hours: 23,252 h, travel distance X-axis: 735 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller manufacturer: 3D-Control Siemens 840D, workpiece diameter (max.): 840 mm, workpiece weight (max.): 600 kg, total height: 2,897 mm, total length: 3,567 mm, total width: 2,615 mm, table width: 650 mm, table length: 650 mm, overall weight: 12,100 kg, spindle speed (min.): 18,000 rpm, tool length: 315 mm, tool weight: 8,000 g, Year of construction: 2012 CNC controller: 3D-Control Siemens 840D Axes X-axis travel mm: 735 Y-axis travel mm: 650 Z-axis travel mm: 560 C-axis degrees: 360º (0,001) A-axis degrees: ±120(0.001) Feed rates m/min: 40 Rapid traverse m/min: 40 Acceleration in the axes m/s2: 6 Milling/turning table nc: Number of pallets: 1 Table dimensions mm: Ø650 Maximum workpiece size (D x H) mm: Ø840x500 Max. workpiece weight kg: 600 Spindle Spindle speed rpm: 18000 Prjdpfxoxrr I Io Ah Ajc Spindle drive power kW: 13/9 (40%ED/cont) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: SK 40 Tool magazine slots: 30 Tool changer: Double Gripper With free neighboring places mm: 160 Max. Tool Length mm: 315 Max tool weight kg: 8 Chip-to-chip time s: 4.9 Equipment Electronic Handwheel Chip conveyor Rigid table with integrated rotary table Infrared probe Internal cooling lubricant supply Rinsing gun Paper band filter Machine running times Under power: 23252 Spindle Working: 6497 Basic machine dimensions / weight Length mm: 3567 Width mm: 2615 Height mm: 2897 Weight kg: 12100

Year of construction: 1997, condition: used, Price: On request - Drive system: CNC - Control system brand: Heidenhain - Number of axes [pcs]: 5 - X-axis travel [mm]: 1200 - Y-axis travel [mm]: 880 - Z-axis travel [mm]: 800 - Table length [mm]: 5000 - Tool holder: SK40 Predpfxewh Shvo Ah Aec - Max. spindle speed [rpm]: 18000 - Options: Digital readout - └ Type of digital readout: Heidenhain - Year: 1997 - Documentation available: Yes - CE marking present: Yes Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 1999, Control Unit Brand HEIDENHAIN Model 426 This 5-axis DECKEL MAHO DMU 80P was manufactured in 1999. It features a Heidenhain 426 control system, a 30-slot tool magazine, and a SK 40 toolholder type. The spindle cooling is capable of 40 bar, enhancing its performance for complex machining tasks. Consider the opportunity to buy this DECKEL MAHO DMU 80P universal machining centre. Contact us for more information about this machine. Application Types Prsdpfxexn Uyfo Ah Aec Milling

Condition: good (used), Year of construction: 2003, functionality: fully functional, CNC Machining Center DECKEL MAHO DMU 60T RS3 Year of manufacture: 2003 CNC Control: HEIDENHAIN MILL PLUS IT Travel distances: X-axis: 780 mm Y-axis: 560 mm Z-axis: 560 mm Spindle speed: 12,000 rpm Tool holder: SK40 Tool changer: 120 positions Table: Swivelling rotary table Pallets: 5 pallets, each with dimensions 630mm x 500mm Additional equipment: Rotary pallet changer, chip conveyor, 40 bar internal coolant supply, 1500 l coolant tank, Rapid traverse: 26 m/min in X and Y, 20 m/min in Z Feed rate: 20 - 10,000 mm/min Spindle: 20 - 18,000 rpm, drive power 28/19 kW, max. torque 121/82 Nm Psdpfx Ahjxr D Dze Asrc (Total weight incl. accessories approx. 11 tons)

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details Prjdpfx Asw I A Eksh Aec x-travel 1150 mm y-travel 710 mm z-travel 710 mm table surface area 1500 x 800 mm table load 800 kg tool taper SK 40 spindle turning speed - stepless 20 - 12000 U/min feeds -stepless- 0 - 30000 mm/min main drive motor 15 / 10 kW Additional information 5-Axis Universal Machining Center Equipment: CNC-control HEIDENHAIN iTNC 530 (5-axis simultaneous) NC rotary table (4th-axis), diameter 800 mm, integrated into the fixed table Controlled milling head (B-axis), swivel range -120/+30 deg. ATC 32-positions (2 x 16) Chip conveyor Coolant system for external cooling, no internal cooling

Condition: ready for operation (used), Year of construction: 2000, Immediately available from toolmaking in Switzerland: 5-axis milling machine Deckel Maho Type: DMU 35 M Year of manufacture: 2000 CNC control: Heidenhain TNC 310 M Electronic handwheel Table: 400 x 280 mm Table load up to 100 kg Travel X/Y/Z: 350/240/340 mm Stepless spindle speeds: 0 – 5000 rpm Pedpoxqbhbefx Ah Ajrc Taper: SK 40 Rapid traverse: 5 m/min Servomotors for X/Y/Z axes Swivel range: 360° Table clamping: +105/–150° Weight: 2 t Tool holders, hydraulic vise Price: EUR 6,500 plus VAT ex works location.

Year of construction: 1996, condition: good (used), A used machining center of the company DECKEL MAHO equipped with: - MillPlus CNC control Psdpfx Ashzt Theh Ajrc - Rigid angular table - coolant system - lighting system - tool changer 25-fold - documentation traverse X/ Y/ Z 800/ 650/ 550mm spindle speed 20- 6300rpm tool holder SK 40 Further tech. Data: see pdf. document Tech. Data and dimensions: Errors excepted.

Condition: good (used), Year of construction: 2007, Cover Maho DMG DMU 70eVolution 5Axis simultaneous Machining center CNC Manufacturer: DMG Deckel Maho Type [ type]: DMU 70eVolution Control unit: Heidenhain iTNC 530 Incl. handwheel/handwheel Year of construction: 12/2006 - erneuert/renewed Spindle - IKZ integrated cooling system for water 40bar and air (both possible-both possible) Travel X/Y/Z 750/600/520 mm B-axis 0 to 180° degrees C-axis n x +-360° degrees Table load up to 350 kg Spindle speed range 20 to 18,000 1/min. Tool holder SK 40 DIN 69871 Weight [weight]: 10,000kg Complete documentation is available. Inspection under power can be arranged at short notice. If you have any further questions, please do not hesitate to contact us. Prjdpfsvcnd Rex Ah Aoc Condition: good - ready for demonstration Delivery: ex warehouse - as inspected Payment: strictly net - after receipt of invoice Subject to prior sale, errors excepted.

Condition: ready for operation (used), Year of construction: 1996, operating hours: 23,198 h, Control Unit Brand DECKEL MAHO Model Millplus V400 Main Drive Prodpfx Asxr Rztsh Asc Number of axis 3 Control Unit Brand DECKEL MAHO Model Millplus V400 Main Drive Number of axis 3 This 3-axis DECKEL MAHO DMU 60T was manufactured in 1996. It features a 24-position tool changer, an NC rotary table, and a spindle speed up to 6300 rpm. The working areas are 600 mm in length, 525 mm in width, and 500 mm in height. It includes a coolant system with a 150-liter capacity. Consider the opportunity to buy this DECKEL MAHO DMU 60T vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 1999, x-travel 800 mm y-travel 700 mm z-travel 600 mm Control Heidenhain TNC 426/ 430PB total power requirement 15 kW weight of the machine ca. 8,4 t Predpfexmtvcox Ah Aoc

Condition: good (used), Year of construction: 2006, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, table width: 1,000 mm, table length: 600 mm, table load: 500 kg, overall weight: 6,500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 24, Equipment: chip conveyor, Accessories: Approx. 40x SK-40 tool holders (without cutting tools) Operating hours: 32,379 h (as of July 9, 2024) Spindle running time: 15,674 h (as of July 9, 2024) Pedpfx Ahexcpkzj Aorc Clamps on table are not included! Machine available from: Imediately

Year of construction: 2001, condition: used, Price: On request Milling machine, VMC Model: CNC Prodpewng H Hjfx Ah Ajc Manufacturer: DMG / Deckel MAHO Type: DMU60T Year of manufacturing: 2001 Control: Heidenhain Working-hours: 26266 Travel: 630x560x560mm Spindle-speed: 10.000 rpm Table-dimensions: 1000x600mm Spindle-take: ISO40 Max. Workpiece-weight: 400kg Incl. Filter Interlit SK200-760 Incl. Automatic toolholder Incl. Documents Incl. Video available Machine-weight: 6700kg Machine-dimensions: 3500x2400x2200mm - Drive system: CNC - Year: 2001 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2006, operating hours: 9,128 h, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: Heidenhain 530 i, workpiece length (max.): 1,250 mm, workpiece weight (max.): 2,000 kg, total height: 3,000 mm, total length: 6,000 mm, total width: 3,000 mm, table load: 2,000 kg, rotary table diameter: 1,250 mm, overall weight: 14,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 40 bar, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-Axis Machining Center Travel Range: X-axis 1,250 mm / Y-axis 880 mm / Z-axis 800 mm / B-axis -30° to +180° / C-axis 360° Rotary Table Diameter: 1,250 mm The machine is available immediately and ready for operation. The 5-axis geometry is within manufacturer tolerances and in good condition. The main spindle must be replaced since the taper is open. Of course, the main spindle will be replaced prior to delivery in case of serious purchase interest. Overall, the machine is in well-maintained condition and has been regularly serviced. In 2020, the machine underwent extensive refurbishment, including renewal of the X/Y telescopic covers. All functions have been tested and all fluids replaced. The machine can, of course, be inspected and tested at our premises. Transport and installation can be arranged at extra cost and by agreement. Chip conveyor / Coolant system / ICS (internal coolant supply) NC universal milling head -30° to +180° Hand rinsing gun Heidenhain touch probe TS640 Oil/emulsion mist extraction unit Operating mode 4 (machining with open door at reduced feed possible) Podpfexpmttox Ah Asrc

Condition: good (used), Universal machining center CNC DMU 70 VL Lid Maho Manufacturer [manufacturer]: Deckel Maho (DMG) Type [ type]: DMU 70 VL Steuerung [control unit]: Heidenhain TNC 430C Construction year: 09/2002 Travel path: X= 710mm Y=520mm Z=520mm spindle rotation speed: 20-18,000 rpm Main spindle power: 36 kW IKZ Internal coolant supply: 30 bar Tool changer: 2 x 32 places Tool holder: SK 40 according to DIN2080 Coolant system: Knoll Chip conveyor: 2 units Weight: 12.800kg Space required [needed space ]approx. (L x W x H): 5.3m x 2.75m x 2.75m Further information: - CNC 5-axis machining center universal - 2 pcs. NC rotary tables with swivel axis - Clamping surface rotary axis (rotary axis): Ø 700 mm x 500 mm Prsdpfx Aevcm I Ijh Ajc - Max. load (centered): 350 kg Complete documentation is available. Inspection under power can take place at short notice. If you have any further questions, please do not hesitate to contact us. Price, ex stock here plus VAT. Condition: good - ready for demonstration Delivery: ex stock - as viewed Payment: strictly net - after receipt of invoice Subject to prior sale, errors excepted. We ask for your order. Further machines and systems available from stock - please enquire. We look forward to hearing from you.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 5,873 h, Control Unit Pedpfxexq Htce Ah Aerc Brand HEIDENHAIN Main Drive Number of axis 5 This 5-axis DMG Deckel Maho DMU 60 monoBlock was manufactured in 2005. It features a B-axis and rotary table attachment, 3D probe, and MillPlus IT CNC control system. With 5873 operating hours and 1397 spindle hours, it also includes a minimum quantity lubrication system. If you are looking to get high-quality milling capabilities, consider the DMG Deckel Maho DMU 60 machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Year of construction: 2000, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, 5-axis CNC machine (VMC) DECKEL MAHO - DMU80P MACH-ID 9194 Pedpfx Ahow Rdl Do Aerc Make: DECKEL MAHO Type: DMU80P Control: HeidenHain TNC430 Year: 2000

Condition: reconditioned (used), Year of construction: 2006, CNC Universal Milling & Drilling Machine DECKEL MAHO DMU 100 P duoBlock Equipped with MILL PLUS iT path control Year of manufacture: 2006 Travel ranges: X 1000 mm Y 1000 mm Z 1000 mm Spindle speed range: 0 – 8,000 rpm, infinitely variable (SK 50) Included accessories: Predpsxn Aibofx Ah Ajc NC rotary table, 900 mm x 700 mm clamping surface (table load max. 1.4 t) Universal milling head with controlled B axis Universal tool changer with 40 magazine slots, double gripper (SK 50) Fully enclosed cabin with sliding doors and interior lighting IKZ – 40 bar (internal coolant supply) Chip conveyor Rotoclear BLUM laser tool measurement 3D touch probe Heidenhain TS 641 Operating modes 3 + 4 Electronic handwheel Chip rinsing gun 3 height-adjustable machine feet Transport device Operating manuals

Condition: used, Year of construction: 2009, x-travel 800 mm y-travel 800 mm z-travel 800 mm control iTNC 530 Heidenhain Speed Mainspindle 50 - 18.000 min/-1 power capacity - main spindel 28 kW max. Torque 121 Nm tool taper HSK-A 63 Swivel range -30 / +180 ° table surface area dia. 900 x 700 mm max. table load 1.400 kg table speed 30 min/-1 rotatable C: 360 ° number of toolpositions 40 pos. tool taper HSK-A 63 max. tool diameter 230 mm max. tool length 450 mm max. tool weight 15,0 kg rapid traverse ( X / Y / Z ) 60 m/min Prodpfx Ahsu Ag Irs Aoc Feed force ( X / Y / Z ) 13 / 13 / 9 kN weight of the machine ca. 13,0 t dimensions of the machine ca. 5,5 x 3,5 x 3,5 m total power requirement 68 kVA 5 Axis Machining Center - Universal DMG DECKEL MAHO - DMU 80 P duoBLOCK - Swivel-Milling-Head (B-Axis) - NC-Rotary Table (C-Axis) - Application Tuning Cycle ATC - WITHOUT clamping devices

Condition: ready for operation (used), Year of construction: 2012, operating hours: 14,297 h, Control Unit Brand Heidenhain Model iTNC 530 Main Drive Spindle speed range 18000 Number of axis 5 Podpfx Ahoxpyygj Aerc Movement X-Axis Movement 735 mm Y-Axis Movement 650 mm Z-Axis Movement 560 mm Tools Type of tool holder SK40 Additional Equipment Magnetic plate 3D infrared probe This 5-axis DECKEL MAHO DMU 65 monoBlock was manufactured in 2012. It features a vertical machining center with an 18000 rpm spindle and a 3D infrared probe. The machine dimensions are X: 735mm, Y: 650mm, Z: 560mm. Ideal for complex and precise machining tasks, the DECKEL MAHO DMU 65 monoBlock machine we have for sale. Contact us for further details regarding this vertical machining center. Application Types Milling

Condition: reconditioned (used), Year of construction: 2006, CNC Universal Milling & Drilling Machine DECKEL MAHO DMU 80 P duoBlock With MILL PLUS iT path control system Year of manufacture: 2006 Travel paths: X 800 Y 800 Z 800 mm Speed range: 0 – 8,000 rpm, stepless (SK 50) Supplied with the following accessories: NC rotary table 900 mm x 700 mm clamping area (max. table load 1.4 t) Universal milling head with controlled B axis Universal tool changer with 40 magazine slots as double gripper (SK 50) Full enclosure with sliding doors and internal lighting IKZ – 40 bar (internal coolant supply) Chip conveyor Rotoclear BLUM laser tool measurement Podpfoxn Aczsx Ah Aerc 3D touch probe Heidenhain TS 641 Operating modes 3 + 4 Electronic handwheel 3 height-adjustable machine feet Transport device Operating manuals

Condition: ready for operation (used), Year of construction: 2005, operating hours: 42,339 h, Main Drive Number of axis 3 Movement X-Axis Movement 730 mm Y-Axis Movement 510 mm Z-Axis Movement 510 mm Prjdpfx Ahsxpkt Ds Aec Media Chip conveyor Yes Internal cooling Yes This 3-axis DMG DECKEL MAHO DMU 60 monoBlock was manufactured in 2005. It features a chip conveyor and a coolant system, ideal for complex machining tasks. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMU 60 monoBlock machine we have for sale. Contact us for more information. Application Types Milling