Used Deckel Rotary Table for sale (710)

Condition: like new (used), Indexing table Manufacturer: Deckel / Maho Type: 81.208143 Clamping surface diameter: 625 mm Clamping width: 515 mm T-slot width: 14 mm Isdpfx Agjwb D N Ej Njbc Transport dimensions: Width: 650 mm Depth: 520 mm Height: 610 mm Condition: As good as new

Condition: used, Univ. Swivel-Tilting-Rotary Table, presumably DECKEL Universal accessory table for tool milling machines Machine No.: 33.04.07 Univ. Table No.: 09.01 Table size: 700 x 400 mm T-slot width: 12 mm T-slot spacing: 45 mm Mounting plate: Width 550 mm x Height 300/240 mm - Table plate with 8x T-slots 12 mm Ibodpfoh Ecm Iox Ag Nec - Table plate can rotate 360° with 7.5° index, swing-away worm for direct dividing - Hand crank with indexing plate and sector arm, built-in division plate 16-30-33-36-39-51-57-63 - +/- 45° tiltable to either side - 15° forward downward tilt, 45° upward forward tilt Weight: 260 kg In good condition

Condition: used, machine/vehicle number: 2414-0075 bzw. 2314-0703, table clamping surface: 520 x 1000 mm Ibjdpjb Hmbpefx Ag Nsc 6 clamping grooves: 16 mm groove spacing: 90 mm Clamping plate horizontally rotatable to the right and left by: 45° each tiltable from/to the machine by: 15° each swivelling to the right and left: 15° each permissible load movable approx.: 1000 kg permissible load rigid table approx.: 1500 kg weight: 376 kg Suitable for milling machines DECKEL: FP 3 L; FP 3 LG; FP 3 LV

Condition: used, Rotary table, rotary indexing table, dividing head, dividing head -Clamping surface: Ø 305 mm -Height: 120 mm Ibsdpfob A Itpjx Ag Nec -Dimensions: 420/370/H120 mm -Weight: 50 kg

Condition: used, Year of construction: 1991, table length 2600 mm table width 2200 mm table height 820 mm table load ca. 10,00 t number of T-slots 11 weight of the machine ca. 12,00 t dimensions of the machine ca. 2,60 x 2,60 x H1,00 m Isdpfjvxwwlsx Ag Nebc Rotary table without drive / motor

Condition: like new (used), functionality: fully functional, Unused tilting and swivel table Iedsr Nd Ngjpfx Ag Nebc with rotary dividing table Suitable for FP 4 lid

Condition: used, Universal swivel-tilt-rotary table DECKEL type FVW, suitable for FP 2 or FP 3 (Deckel no. 62473). Table size: 700 x 240 mm. Swivel range: +/- 30° in all directions. Weight: approx. 90 kg. Ijdpfx Agoxcilrs Njbc

Condition: used, Universal swivel, tilting, and rotary table DECKEL Universal add-on table for tool milling machines suitable for FP 2L, FP 3L, or FP 4L No. 2314 Year of manufacture: approx. 1975 Clamping surface: 1000 x 520 mm - 6 clamping slots, 16 mm, spacing 90 mm Ibodpfx Ajd E A I Njg Njc - Clamping plate can be rotated horizontally to the right and left up to 45 degrees, with scale - Can be tilted to/from the machine +/- 15 degrees - Swivel range +/- 15 degrees - Swivel table, tilting table, angle table Permissible load max. 1000 kg Weight: 400 kg Good condition

Condition: used, Year of construction: 1985, functionality: fully functional, table length: 680 mm, table width: 380 mm, table height: 345 mm, For sale is a Deckel milling table, which was installed on an FP2 milling machine. Isdpeuuh Sujfx Ag Nsbc The angle and rotation functions are fully functional, unfortunately there is no longer a crank. Signs of use on surface recognizable on pictures Dimensions: 38*68 cm Height: 25 cm

Condition: good (used), DECKEL universal table, Support surface 800 x 380 mm 8 T-slots Iedpsxb U Dqjfx Ag Njbc See photos for condition

Condition: used, Clamping table, clamping angle, T-slot table, rotary table, milling machine table, angle table -Manufacturer: Deckel, milling machine table T-slot table type 2712 from milling machine FP4L -Table surface: 555 x 1395 mm Isdoulpz Sjpfx Ag Nebc -T slots: slot width 16 mm, slot spacing 90 mm -Transport dimensions: 1640/555/H500 mm -Weight: 575 kg

Condition: used, Deckel transfer table swivel table No. 2231 For Deckel milling machine FP 3 Iedpfx Ajvu R Nmeg Nsbc

Condition: like new (used), Universal milling table is in very good condition. Ibodpohtyxwjfx Ag Nsc

Condition: good (used), functionality: fully functional, Universal table for DECKEL ; FP - Milling machines Ibedjw Rq Urepfx Ag Njc . Dimensions : 80 x 240 cm .

Condition: used, Cross table, cross slide table, clamping table, clamping plate with T-slots, clamping angle Ibjdpeb A Ix Ejfx Ag Nsc -Cross table for lid type: KF12 -Table surface: 400 x 400 mm -Travel: x 50 mm/y 65 mm -Weight: 60 kg

Condition: ready for operation (used), Year of construction: 2007, operating hours: 32,510 h, functionality: fully functional, machine/vehicle number: 11670000823, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 180, TECHNICAL DETAILS X-axis travel: 800 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Drive: Variable-speed asynchronous motor with liquid cooling Control: Sinumerik 840D powerline Work spindle Tool holder: HSK-A63, hydraulic-mechanical tool clamping Spindle speed: 0 – 10,000 rpm, continuously programmable Feed Drive: AC brake motors on the X, Y, Z, and B axes Feed range on the X, Y, and Z axes: 0 – 60,000 mm/min Rapid traverse on the X, Y, and Z axes: 80 m/min Measuring system Resolution on the X, Y, and Z axes: 0.001 mm Position tolerance on the X, Y, and Z-axis: 0.008 mm Pallet Number: 2 Size: 630 × 630 mm Hole pattern: 108 × bushing Ø 16.02 H6 Centering bushing: Ø 16.02 H6, 38.5 mm deep NC rotary table Max. tabletop rotation: 30 rpm Tabletop holding torque at 40% duty cycle: 5,000 Nm Tabletop holding torque at 100% duty cycle: 3,250 Nm Workpiece weight Per pallet: max. 800 kg Difference with different loads: max. 800 kg Tool magazine Type: Vertical chain magazine HSK-A63 Positions: 180 Tool changing system: Double gripper Max. tool diameter standard: 80 mm Max. tool diameter with free adjacent positions: 160 mm Max. Tool length from spindle nose: 550 mm Max. tool weight: 12 kg Max. magazine load: 630 kg MACHINE DETAILS Space requirement: 6.0 x 6.0 m Height: 3.2 m Ijdoxf Htxjpfx Ag Njbc Weight: 18 t Power requirement: 71 kVA Machine dimensions: approx. 4.7 x 5.6 x 3.2 m EQUIPMENT - Internal coolant supply - Chip conveyor - Belt filter system - Cooling unit - Rotoclear - Tool breakage detection (laser) - Mist separator - Measuring probe - Handheld control unit - Flushing gun - Blow-air cooling system - 4-color signal lamp - Dynamic package

Condition: ready for operation (used), Year of construction: 2008, General Data Measurements width 2930 mm Measurements depth 3210 mm Iodpfx Agjxn U A Hs Nsbc Measurements height 2900 mm Machine weight 9200 kg Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 28000 rpm Spindle motor power 38/28 kW Tool taper HSK-A63 Number of axis 5 Movement X-Axis Movement 450 Y-Axis Movement 600 Z-Axis Movement 400 Table Outer length 400 mm Outer width 400 mm Number of tslots 5 Distance between 63 mm Media Chip conveyor Yes Internal cooling Yes Additional Equipment Tool Storage Capacity: 30 tools /Max Tool Weight: 6 kg / Max Tool Diameter: 80 mm / Max Tool Length: 250 mm Graphite Dust Collector Heidenhain Touch Probe TS 649 3D Quick Set for 5-Axis Calibration This 5-axis DMG DECKEL MAHO HSC 55 linear vertical machining centre was manufactured in 2008. Consider the opportunity to buy this DMG DECKEL MAHO HSC 55 linear vertical machining centre if you are looking to get high quality milling capabilities. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, controller model: Heidenhain Mill Plus, table width: 500 mm, table length: 500 mm, rotary table diameter: 500 mm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 17,618 h, coolant supply: 40 bar, spindle nose: SK40 (DIN69871), number of slots in tool magazine: 60, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The 5-axis DMU50 eVolution has been removed from production in working order and can also be seen in operation in our showroom (by appointment). Ibjdpfoxnixiex Ag Nsc The machine is equipped with 40 bar internal spindle cooling, chip conveyor, 60-tool changer, Renishaw tool setter, Heidenhain 3D probe, 18,000 RPM spindle, Visiport, and original factory extraction system.

Condition: good (used), branded engraving milling machine, cover GK12 with accessories Isdpou T Nffjfx Ag Nsbc

Condition: ready for operation (used), Year of construction: 1999, Control Unit Brand HEIDENHAIN Model 426 This 5-axis DECKEL MAHO DMU 80P was manufactured in 1999. It features a Heidenhain 426 control system, a 30-slot tool magazine, and a SK 40 toolholder type. The spindle cooling is capable of 40 bar, enhancing its performance for complex machining tasks. Consider the opportunity to buy this DECKEL MAHO DMU 80P universal machining centre. Contact us for more information about this machine. Application Types Milling Ibsdpjxn Uyfjfx Ag Njc

Condition: good (used), Year of construction: 1990, CNC milling machine, lid, FP4-AT, 3 axes X 560/Y500/Z450 speed range 40-4000 min-1 control Contur-3, SK-40 record, weight 3.4 tons. Isdpfxsdygdhe Ag Nobc

Condition: good (used), Year of construction: 1993, Graver grinding machine Make: Deckel Model: S0 Ijdeu T Nfxepfx Ag Njbc year of construction 1993

Condition: good (used), Year of construction: 1994, Graver grinding machine Make: Deckel Iedpfxeu T Nf So Ag Nebc Model: S0 year of construction 1994

Year of construction: 1969, condition: good (used), Univ. tool milling machine DECKEL type FP 1 Machine No. 37101 Year of construction approx. 1969 travel X: 300 mm Y: 150 mm Z: 340 mm table size 600 x 200 mm spindle mounting MK 4 - S20 x 2 spindle speed vertical 95-1900 rpm. 12 steps Spindle speed horizontal 60-1200 rpm. 12 steps motor power 1,0 and 1,5 kW pole-changing Ibjdpfx Aol Dx I Sog Nsc Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 6 gear steps - feed in X- and Z-axis - Coolant device with mechanical pump in machine base - pinol shift at vertical milling head 60 mm - adjacent control cabinet space requirement L x W x H 1000 x 900 x 1750 mm weight 690 kg good condition accessories: - collets - rotary table - vice - Counterholder H. Milling

Condition: good (used), Technical data Iedpfxexgh R Ue Ag Njbc Working area: 250 × 700 mm Copy table size: 430 × 600 mm Travel / working range longitudinal (X): approx. 322 mm Travel / working range transverse (Y): approx. 200 mm Spindle drive / power: approx. 1.5 / 1.7 kW Spindle speed: approx. 80 – 20,000 rpm Copy ratio (enlargement / reduction): 1:1 to 1:4 Overall dimensions (approx.): 2,000 × 2,000 × 2,000 mm Weight: approx. 1,650 kg