Used Deco for sale (261)

Condition: used, Year of construction: 1988, strip width (20) 44 - 320 mm strip thickness 0,66 – 4 mm Kedpfx Aolil Ewjddodg strip cross section max. 930 mm² reference material (tensile strength) St42-2 (500 N/mm²) yield stress max. 280 N/mm² coil weight max. 4 t coil-dia max. 1.500 mm

Year of construction: 1988, condition: used, strip width (20) 44 - 320 mm Kdodpfxsbicz He Addjg strip thickness 0,66 – 4 mm strip cross section max. 930 mm² reference material (tensile strength) St42-2 (500 N/mm²) yield stress max. 280 N/mm² coil weight max. 4 t coil-dia max. 1.500 mm

Year of construction: 2020, operating hours: 245 h, condition: good (used), functionality: fully functional, machine/vehicle number: QX20200111A551, Used - Pre insulated pipe decoiler. Kodpfst Eatxsx Addodg The decoiler could be used for other pipe types. Pipe coiler parameters: Installed power: 5.5 KW Voltage: 220V Current frequency: 50 Hz Compressed air: 6 Bar Total weight: 1700 kg Coil dimensions: Coil ID: 1600, 1700, 1800, 1900, 2000, 2100, 2200, 2300, 2400mm Coil OD: up to 3100mm Coil width: up to 1100mm Please call for more information

Condition: used, Pay-off and take-up decoiler for coil material WANZKE CAMU Type SC 515/M Serial no. 8487 Year of manufacture: 2006 Coil weight approx. 1,500 kg Maximum coil width: 600 mm Coil inner diameter: 370 - 640 mm Maximum coil outer diameter: 1,800 mm Mandrel shaft diameter: 90 mm Distance from mandrel crown center to mandrel base: 950 mm Mandrel crown speed: 13 rpm Motor speed: 920 rpm Gearbox transmission ratio: 1:70 Mandrel drive motor power: 1.1 kW Power supply: 400 Volt, 50 Hz - Mechanical expansion of the mandrel crown with hand crank - Drive via geared motor with worm gearbox, directly mounted on the mandrel shaft - Geared motor with electric brake - Mandrel shaft with mechanical slip clutch, pre-tensioned and adjustable via disc springs - Mandrel crown without strip travel arms - Without electrical control system and without loop switch Space requirement (L x W x H): 1300 x 800 x 1230 mm Weight: 380 kg Kodpfx Adowvv Rqodedg Good condition

Condition: ready for operation (used), functionality: fully functional, Steris VHP 1000ED Biodecontamination Unit APPLICATION The STERIS VHP® 1000ED Biodecontamination Unit is designed for mobile biodecontamination1 of clean, dry, sealed enclosures2 such as isolators, chambers, and small rooms using STERIS's VHP process technology, featuring Vaprox® Hydrogen Peroxide Sterilant DESCRIPTION With its mobile design and multi-purpose features, the VHP® 1000ED is one of the most versatile pharmaceutical grade Biodecontamination Units on the market today. The Biodecontamination Unit uses STERIS patented VHP process technology. The process uses hydrogen peroxide vapor as a broad spectrum antimicrobial without condensation of active ingredient onto surfaces. This non condensation feature provides additional benefit of a wide range of material compatibility. The VHP® 1000ED Biodecontamination Unit features easy operation with an easy to use operator interface and other key built-in design features like Kdedpfswqz Dlox Addjg dehumidification, pressure control, Vaprox cartridge interface and aeration module for an All-In-One unit. Once the Customer cycle is selected, the control system automatically completes the desired biodecontamination cycle. Additionally, the VHP® 1000ED Biodecontamination Unit offers an impact printer for hard copy of the cycle data as well as a USB port for electronic biodecontamination cycle capture. The unit includes a connection kit with four (4) Banjo 1.25" couplings and 25 ft. (7.6 m) of tubing for connecting to enclosures or rooms Good working condition. Please check out our other listings as well.

Condition: ready for operation (used), Uncoiler, Sheet Metal Decoiler, Used machine Ksdpfx Adjx Emdgodedg Manufacturer: GSW Schwabe AG Type: LHM 150/800 Overall dimensions: 860 x 740 x 1430 mm Load capacity: 150 kg Sheet width: 150 mm

Condition: ready for operation (used), decoiler OBRU 300 kg x 220 mm under power Kedpsxx R Utsfx Addedg

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, control type: manual, degree of automation: manual, actuation type: manual, coil inner diameter: 370 mm, coil outer diameter: 430 mm, coil weight: 2,000 kg, coil width: 3,000 mm, -Double band decoiler with a disk; -3000 mm max coil width (when using 1 coil); -Loading up to 2000 kg max coil; -Dimensions shown in picture; Kdsdpox Nf R Hefx Addog -Barely used; -We can arrange transportation to any European Union country at buyers costs;

Condition: used, JOINT Decoiler – Used – CE Model: JDM 8.0 S Capacity: 8,000 kg Kdodox N S H Ijpfx Addsg Weight: 3,700 kg Year of manufacture: 2003 Available quantity: 2 units

Condition: excellent (used), Overall dimensions: 3700 x 1070 x 1700 mm Disc coil inner diameter: 460 - 600 mm Maximum sheet roll width: 1000 mm Direction of rotation: Bidirectional Kdodpjpvia Eefx Addog Hydraulic operation: - rotation - transverse movement on the chassis - shaft grip Pneumatic operation: - brake

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, Coil weight: 150kg Strip witdh: max. 100mm Outer diameter: max. 1.200mm Inner diameter: 320 ... 520mm Kdodpfxsh T Duce Addsg Performance • decoiler fixed on moveable frame • Disc on back side and ring on front side for lateral coil keeping • manual adjustable brake

Condition: good (used), Year of construction: 2009, functionality: fully functional, number of straightening rollers: 7, coil weight: 4,000 kg, coil outer diameter: 1,500 mm, number of feed rollers: 2, straightening roller diameter: 80 mm, coil width: 600 mm, 1. Decoiler Type: MS 4000 Coil weight: max. 4.000 kg Strip width: max. 600 mm Outer diameter: max. 1.500 mm Inner diameter: 475 – 535 mm Execution: • Hydraulic expansion • Hydraulic pressure arm from top with hydraulic driven roll Rolle • Lateral swivel in roll on front side, disc at back side and additional 3 pc. single arms for coil keeping • Mandrel driven by electric motor, control by light sensor • Decoiler moveable for loading by hydraulic • Coil loading table 2. Straightening maschine Type: MR 58 Strip width: max. 600mm Stock thickness: 0,8 – 3,6 mm at rigidity 400 N/mm2 Straightening rolls: 7 pc., supported Pulling rolls: 2 pc. Diameter of rolls: 80 mm Speed: 5 – 30 m/min Execution: • Hardened and ground rollers • Pneumatically lifted feed roller • Straightening rollers adjustable as a block • Lateral strip guiding at infeed, manually adjustable via hand crank • Hydraulic strip insertion aid (support table, extendable tongue and pressure roller from above) • Straightening head can be opened (alligator mouth) Kedpfx Aoq A Tw Rsddodg • Ultrasonic sensor for loop control • Swivel control panel • Siemens S7-200 control system

Condition: good (used), functionality: fully functional, number of straightening rollers: 7, coil outer diameter: 1,400 mm, coil inner diameter: 508 mm, roller diameter: 80 mm, number of feed rollers: 2, feed roller diameter: 80 mm, straightening roller diameter: 80 mm, coil width: 400 mm, load capacity: 3,000 kg, 1. Decoiler Make: Dimeco Model: 2371 E-FPS Year of manufacture: 2006 Load capacity: max. 3 tons Strip width: max. 600 mm Expansion range: 470 – 530 mm Coil outer diameter: max. 1,400 mm Equipped with: • Hydraulic expansion • Pneumatic hold-down roller from above • 6 strip edge guide arms • Pneumatic disc brake 2. Straightening Machine Make: Dimeco Model: 1676 C-VV Year of manufacture: 2000 Strip width: max. 400 mm Strip thickness: 0.8 – 4.5 mm Number of straightening rollers: 7 Kodotgvgpjpfx Addsdg Number of entry and exit rollers: 2 each Roller diameter: 80 mm Equipped with: • Frequency-controlled drive • Hydraulic strip feeding aid with support table, feed tongue, hold-down arm from above • Pneumatically liftable entry roller • Lateral strip guide rollers • Pneumatically swivelling strip transfer table between straightening machine and feeder

Condition: excellent (used), Year of construction: 2015, operating hours: 5,100 h, Power: 4,000 kN Bolster area: 3,000 x 1,400 mm (W x D) Clamping surface table: 2.950 x 1.500mm Clamping surface ram: 2,950 x 1,240 mm Daylight: 600 mm (stroke down and adjustment on top) Frequency: 5 - 100 rpm, infinitely variable Stroke: 20 - 200 mm, automatically adjustable Ram adjustment: 150 mm (motorized) Ksdpfjpvlf Sox Addsdg Design: - With servo technology, speed of ram adjustable, possible to pendle - Table - clamping plates divided and manually adjustable - 8-fold sliding guide - motorized oil - central lubrication - automatic ram adjustment - pneumatic ram weight compensation - electromotive stroke adjustment - control Siemens + Fanuc - visualization Siemens Panel PC in mobile desk - tool safety device 8-fold - tool data memory - 2-channel press force measurement - Hydraulic overload protection - T-slots in table and ram - Longitudinal groove for tool centering in ram - Anti vibration machine feet - opening in the table Equipped with a complete decoiling line make Lorenz Decoiler Load capacity: 80kN strip width: 20 - 820 mm Inner diameter: 470 - 520 mm Coil - outer diameter 1.800 mm Straightening machine strip width: max. 820 mm Strip thickness: 0,5 - 4,0 mm Straightenable cross section: 1.600mm² Number of rolls: 9 pcs, Ø 65 mm + 2 pcs feeding rolls Speed: 0 - 30 m/min Electronic roll feed Strip width: max. 820 mm Strip thickness: 0.5 - max. 6.0 mm Cross section: max. 2.400 mm² Number of rollers: 2 pcs. Ø 120 mm

Condition: good (used), Year of construction: 2007, Max. pane height: 2700 mm. Connected load: 400V AC/50Hz/3.1A Total length with inlet and outlet: approx. 7700 mm. Max. height: approx. 4200 mm. Weight: 2550 kg. Condition: good, second-hand. Kdodpfjxq Rp Ijx Addsg

Condition: used, carrying force: ca. 50 kg Kodpfxec Rf Sle Addodg tape width: bis ca. 50 mm tape exterior-Ø: 750 mm engine: 400 V, 390 Upm, 0,25 kW space needed: 850 x 600 x 1350 mm weight: ca. 100 kg

Condition: excellent (used), functionality: fully functional, actuation type: mechanical, coil inner diameter: 200 mm, coil outer diameter: 800 mm, coil weight: 100 kg, coil width: 220 mm, for sale AMADA ORII manual sheet metal winder cable winder Kdjdpjxvitvefx Addog manufacturer/type AMADA ORII ST 02 Z coil width: max 220mm coil inner diameter 200-500 mm coil outer diameter: 1100mm coil weight max 100kg

Condition: good (used), Year of construction: 1998, Manufacture: LIV Load capacity: 2x2t Ksdpfji D D Eujx Addsdg max plate width: 310 coil inner diameter: 380-460mm Max roll outer diameter: 1200mm

Condition: good (used), Manufacturer: LIV load capacity: 2x2t Kedji Azy Hjpfx Addodg maximum plate width: 310 coil inner diameter: 380-460 mm max. reel outer diameter: 1200 mm

Condition: good (used), load capacity: 200 kg material width: 200 mm coil inner diameter: 240-500mm Coil outer diameter: 1200mm Kjdpfx Aoihvdreddjdg

Condition: good (used), Year of construction: 1998, Manufacturer: LIV load capacity: 2x2t maximum plate width: 310 coil inner diameter: 380-460 mm Kdodei D Dxyepfx Addog max. reel outer diameter: 1200 mm

Condition: good (used), Year of construction: 1976, Pressing force: 20 t Stroke rate: max. 150 rpm, adjustable via PIV gearbox from the control panel Stroke, adjustable: 10 - 50 mm Installation height: 270 mm (maximum stroke at top, without wedge plate) Ram reinforcement: 50 mm Table area: 340 x 320 mm (W x D) Pass-through opening: 70 x 180 mm (W x D) Ram area: 160 x 230 mm (W x D) with wedge plate Drive power: 2 HP Features: - 1 connecting rod - Double V-ram guide - Motorized oil lubrication - Manual ram adjustment, 50 mm - Mounting bracket for feed unit, tiltable - 3 cams for feed unit etc. Kjdpfx Adewufrzjdjdg - Free-standing control panel - Forward and reverse operation - Manual setup using a rod

Condition: good (used), Year of construction: 1984, Power: 800 kN Kdsdpsdhzf Iofx Addog Frequency: 30 - 200 rpm, adjustable by PIV gearing Stroke, adjustable: 20 - 100 mm Daylight: 500mm (max. stroke up) Ram adjustement: 75mm Size of bolster: 1.010 x 800mm Opening in bolster: 700 x 150mm Ram area: 860 x 700mm Motor power: 22 kW equipped by: - 8pc. guideways - hydraulic overload - motorized oil lubrication - motorized ram adjustment - electro pneumatic stroke adjustment with complete decoiling line make ALBA, consisting of: Decoiler Outer diameter max. 1.400mm equipped by: • Decoiler moveable hydraulic • hydraulic coil loading device • hydraulic drive • hydraulic expansion 480 - 530mm • hydraulic pressure arm, lateral adjustable by handwheel • lateral arms Straightener Type: Ma Ria 9 Width: max. 400mm Thickness: 0,5 - 5,0mm Number of pulling rolls: 2 pc., Ø 120mm, upper can be lifted by hydraulic Number of straightening rolls: 9 pc., Ø 60mm, upper rollls adjustable by hydraulic drive, all rolls supported equipped by: • hydraulic strip insertion device • lateral strip guidings at entrance • lateral strip guidings at exit • basket at exit • loop control by sensor • lateral loop guiding Roll feeder Type: Vhy 400 Width: max. 400mm Thickness: max. 5,0mm passline adjustement by hydraulic jack We can offer even only press or decoiling line

Condition: excellent (used), Year of construction: 1980, spool width: max. 1.600 mm spool ID: 150/250/400 mm Kdedpfowzuwtex Addeg coil weight: max. 4 t coil OD: max. 1.250 mm year: approx. 1980

Condition: new, Year of construction: 2012, strip width: max. 600 mm strip thickness: max. 3 mm Kedpfx Adswzu E Dsdjdg coil weight: max. 4 t coil OD: max. 1.500 mm mandrel Ø: 508 mm year: 2012 (never used)