Used Tornos R 10 for sale (122)

Condition: used, Year of construction: 2016, Tornos Evo Deco 32/10 Sliding Head Lathe, Twin Spindle 10 Linear Axes & 2 x C Axis, Spindle 1, 5C Spindle 32mm Max Bar Diameter, Serviced by 6 Turning Tool Positions, 4 Drill/Mill End Bar Positions, All Drive Capable, 6 Side Mill/Drill Postions, 4 Drive Capable, Spindle 2 - Subspindle, ER Collet Type, Serviced by 3 Turning Tool Positions, 4 Mill/Drill End Bar Positions, All Drive Capable, Parts Grabber and Parts Hatch, 8000rpm on Main & Sub, Fanuc 31i-BS CNC Control, 240mm Max Work Piece Length, Tornos Robobar SBF-532 Bar Feed, 3 Metre Bar Length Max, 820kg. S/No. 13366 (2016) 3800kg. Country of Origin: Switzerland Location: These lots are located in Kent, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Ihedjytf U Sjpfx Abvsw

Condition: ready for operation (used), Year of construction: 1999, bar diameter (max.): 10 mm, number of axes: 9, This TORNOS DECO 2000-10 was manufactured in 1999. It features a loading magazine with drum, integrated hydraulic unit, and supports both front and rear with a center height of 1100 mm. It includes a movable headstock, directional spindle stop, and cross slide with tool holders. Ideal for precision turning, it operates on AC drive motors with an absolute measuring system. Contact us for more information about this machine. 2017 overhauled and two further similar machines available (both overhauled 2018)Overhaul of 2017 machine:Standard overhaul package: Maintenance of Block III, cleaning, and recommissioning. Overhaul of the guide bushing and spindle overhaul of S1, S2, and S4. Replacement of all ball screws including bearings and the guides of all axes. Replacement of the cooling lubricant pump, all cooling lubricant lines, and the cooling lubricant sensor. Replacement of the scraper blades on the cross slides. Replacement of all pneumatic lines and valves. Replacement of the machine room light, transparent panels, external fan, fan cable, and keyboard. Additional options (special services): The guide bushing was completely replaced (not just overhauled). Installation of a new central lubrication system. Replacement of the bellows coupling, external encoders, and screen. Replacement of the control and amplifier fans. During commissioning, the “Spindle Positioning S4” option was also activated and the loading magazine was set up. Ihedpfx Abox D D Iksvjw Additional information • Maximum bar length: 3040 mm • Electrical control box • AC drive motors • Motor voltage: 3 x 380 V 50/60 Hz • Control voltage: 1 x 24 V DC • Movable headstock • Cross slide with 4 tool holders T11-T14 with vertical and horizontal movement • Absolute measuring system • 9 axes with C1 and C4 • Loading magazine with drum "HYBRIDE 10+5" • 14 guide tubes for 1-4 mm bars • 14 guide tubes for 4.1-10 mm bars without bar preparation up to 8 mm • Collet for Tryton • 2 different hybrid drums • Directional spindle stop S1 • Equipment to be equipped with Robobar SSF 3 m loading magazine Technical Specification Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2005, operating hours: 37,578 h, bar diameter (max.): 8 mm, number of axes: 9, This Tornos Deco 10 was manufactured in 2005. A swiss type turning machine featuring a drum with loading magazine, a filter with a 25-liter capacity, and an integrated hydraulic unit. It supports various bar diameters up to 8 mm, ensuring versatility for precision work. Consider the opportunity to buy this Tornos Deco 10 swiss type turning machine. Contact us for more information. • Drum with loading magazine Ihedpfxex D Dm Tj Abvjw • 10+5" HYBRID drum • Integrated hydraulic unit • Support leg rear/front • 1100 mm center height • Filter with 25 liter capacity • Electrical: 380 V, 3-phase, 50/60 Hz motor voltage • Control voltage: 24 V DC • Bar compatibility (for 14 guide tubes): • 1–4 mm diameter bars • 4 mm diameter bars • 8 mm diameter bars Additional equipment • 1 piece oil basin • 1 chip collecting basinOptional: Comprehensive package of measuring instruments Technical Specification Counter Spindle Yes

Condition: excellent (used), Year of construction: 2014, operating hours: 5,650 h, functionality: fully functional, machine/vehicle number: 243-0011, CNC AUTOMATIC LATHE TORNOS EVODECO 16/10 with bar-feeder LNS Fanuc 31iB - 5646 hours Manufacturing origin CH Voltage 400 V Netweight 2700 kg Dimensions 2135x1250x2114 mm TECHNICAL DATA Number of axes 10 Number of spindles 2 Main spindle Maximum bar diameter 16 mm Maximum machining length 180 mm Spindle speed 12'000 min-1 Spindle power 15.8 kW Indexing accuracy C-axis 0.001 Counter spindle Maximum bar diameter 16 mm Spindle speeds 12'000 min-1 Spindle power 15.8 kW Indexing accuracy C-axis 0.001 Tool gang 1 Number of positions 5 Number of motorized positions 3 Rotating tool speed 8'000 min-1 Tool gang 2 Number of positions 5 Number of motorised positions 3 Speed of rotating tools 8'000 min-1 End attachment Number of positions 4 Number of motorised positions 3 Speed of rotating tools 8'000 min-1 back operation Number of positions 6 Number of motorised positions 6 Rotating tool speed 8'000 min-1 Power supply Supply voltage 400V Isdekhnqgopfx Abvohw Errors and omissions excepted-data given without obligation

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 2410, Year 2001 with Fanuc Deco and 10 axes Fully inspected and partially overhauled as per report. Country of manufacture: Switzerland Net weight: 1500 kg Customs tariff number: 8458.11 20 Dimensions: 1650x1050x1850 mm TECHNICAL SPECIFICATIONS (standard execution) Headstock (Z1 axis) (+C axis optional) Iodpfsw T Tfrex Abvshw Maximum bar passage diameter: 10 mm Maximum workpiece length, depending on guide bush: 60/90 mm Programmable spindle speed: 0-16,000 rpm Positioned and indexed stops, increment: 0.1° Maximum spindle power: 1.1 (3.7) kW Tool post (X1/Y1) (X2/Y2) Number of turret tools (2 slides; 2 x 2 axes): 2 x 4 Tool section: 8 x 8 mm Number of transverse drilling/milling tools on turret: 4 Programmable rotation speed: 0-12,000 rpm End-working attachment (X3/Y3) Max. number of end-working tools: 3 Programmable rotation speed: 0-12,000 rpm Sub-spindle and secondary operation (X4/Z4) (+C axis optional) Maximum clamping capacity: 7 mm Programmable rotation speed: 0-16,000 rpm Positioned and indexed stops, increment: 0.1° Maximum number of secondary operations: 4 Number of fixed or rotating spindles: 4 Maximum spindle speed: 9,000 rpm Tornos-Bechler/Fanuc specific CNC control Processor type: 486 DX2 Number of simultaneous axes: 10 Machine versions 9 axes + spindle C axis and/or sub-spindle C axis All technical details are subject to verification and provided without guarantee.

Condition: repair required (used), Year of construction: 2001, functionality: not functional, Needs to repair automaton Ihedpfev Im U Ssx Abvow lathe + triton charger

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 10 [mm] - Travel : 66 [mm] - Spindle speeds : 16000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 10 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.1 [°] GUIDE BUSH HOLDER 1 - Number of positions : 4 GUIDE BUSH HOLDER 2 - Number of positions : 4 - Number of motorized positions : 3 - Live tools speed : 12000 [rpm] END ATTACHMENT - Number of positions : 3 - Number of motorized positions : 3 - Live tools speed : 12000 [rpm] SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 9000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1700 X 1010 [mm] - Machine height : 2000 [mm] Iedpfx Abjuhbakovohw - Machine weight : 1500 [kg] MACHINE HOURS - Number of hours under power : 89897 [h] EQUIPMENT - CNC : Fanuc - Rotating tool motor on : S2,S3,S5 - Rotating guide bush - Parts catcher - Ejection of workpiece - Coolant tank - Number of turning tool holders : 4 - Number of fixed tool holders : 6 - Number of turning tool holders : 7

Condition: used, TECHNICAL DETAILS - Number of axes : 10 Isdevm Dxrepfx Abvehw - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 10 [mm] - Max. machining length : 100 [mm] - Spindle speeds : 14000 [rpm] - Spindle power : 10.1 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 10 [mm] - Spindle speeds : 14000 [rpm] - Spindle power : 7 [kW] - C axis indexing precision : 0.001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 8 GUIDE BUSH HOLDER 2 - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 12000 [rpm] END ATTACHMENT - Number of positions : 3 - Number of motorized positions : 3 - Live tools speed : 12000 [rpm] SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 9000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1850X1140 [mm] - Machine height : 1800 [mm] - Machine weight : 1650 [kg] EQUIPMENT - CNC : Fanuc 31i-B5 - Interface : Ethernet / RS232 / USB / PCMCIA - 3 colors status lamp - Rotating tool motor on : S2,S3,S5 - Rotating guide bush - Parts catcher - Ejection of workpiece - Coolant tank * with high-pressure pump : HP MÜLLER CL2 80 [bars] - Bar loader : IEMCA ELITE 112/33 - Oil mist extractor : ELBARON - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: used, TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 10 [mm] - Travel : 66 [mm] - Spindle speeds : 16000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Max. bar diameter : 10 [mm] - Spindle speeds : 12000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.1 [°] GUIDE BUSH HOLDER 1 - Number of positions : 4 GUIDE BUSH HOLDER 2 - Number of positions : 4 - Number of motorized positions : 3 - Live tools speed : 12000 [rpm] END ATTACHMENT - Number of positions : 3 - Number of motorized positions : 3 - Live tools speed : 12000 [rpm] SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 9000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1700 X 1010 [mm] - Machine height : 2000 [mm] Iodpfx Abouhbadevohw - Machine weight : 1500 [kg] EQUIPMENT - CNC : Fanuc - Rotating tool motor on : S2,S3,S5 - Fixed guide bush - Parts catcher - Ejection of workpiece - Coolant tank - Number of turning tool holders : 4 - Number of fixed tool holders : 5 - Number of turning tool holders : 6

Condition: used, TECHNICAL DETAILS - Number of axes : 10 Isdpevm Dxljfx Abvjhw - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 10 [mm] - Max. machining length : 100 [mm] - Spindle speeds : 14000 [rpm] - Spindle power : 10.1 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 10 [mm] - Spindle speeds : 14000 [rpm] - Spindle power : 7 [kW] - C axis indexing precision : 0.001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 8 GUIDE BUSH HOLDER 2 - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 12000 [rpm] END ATTACHMENT - Number of positions : 3 - Number of motorized positions : 3 - Live tools speed : 12000 [rpm] SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 9000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1850X1140 [mm] - Machine height : 1800 [mm] - Machine weight : 1650 [kg] MACHINE HOURS - Number of working hours : 15104 [h] EQUIPMENT - CNC : Fanuc 31i-B5 - Interface : Ethernet / RS232 / USB / PCMCIA - 3 colors status lamp - Rotating tool motor on : S2,S3,S5 - Rotating guide bush - Parts catcher - Ejection of workpiece - Coolant tank * with high-pressure pump : HP MÜLLER CL2 80 [bars] - Bar loader : IEMCA ELITE 112/33 - Oil mist extractor : ELBARON - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: used, TECHNICAL DETAILS - Number of axes : 10 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 10 [mm] - Max. machining length : 100 [mm] - Spindle speeds : 14000 [rpm] - Spindle power : 10.1 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 10 [mm] - Spindle speeds : 14000 [rpm] - Spindle power : 7 [kW] - C axis indexing precision : 0.001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 8 GUIDE BUSH HOLDER 2 - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 12000 [rpm] END ATTACHMENT - Number of positions : 3 Iodpfx Ajvm Dxxobvehw - Number of motorized positions : 3 - Live tools speed : 12000 [rpm] SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 9000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1850X1140 [mm] - Machine height : 1800 [mm] - Machine weight : 1650 [kg] MACHINE HOURS - Number of working hours : 31340 [h] EQUIPMENT - CNC : Fanuc 31i-B5 - Interface : Ethernet / RS232 / USB / PCMCIA - 3 colors status lamp - Rotating tool motor on : S2,S3,S5 - Rotating guide bush - Parts catcher - Ejection of workpiece - Coolant tank * with high-pressure pump : HP MÜLLER CL2 80 [bars] - Bar loader : IEMCA ELITE 112/33 - Oil mist extractor : ELBARON - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: used, TECHNICAL DETAILS - Number of axes : 10 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 10 [mm] - Max. machining length : 100 [mm] - Spindle speeds : 14000 [rpm] - Spindle power : 10.1 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 10 [mm] - Spindle speeds : 14000 [rpm] - Spindle power : 7 [kW] - C axis indexing precision : 0.001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 8 GUIDE BUSH HOLDER 2 - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 12000 [rpm] END ATTACHMENT - Number of positions : 3 - Number of motorized positions : 3 - Live tools speed : 12000 [rpm] SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 9000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1850X1140 [mm] - Machine height : 1800 [mm] - Machine weight : 1650 [kg] MACHINE HOURS - Number of working hours : 32221 [h] EQUIPMENT - CNC : Fanuc 31i-B5 Ihsdpevm Dx Eefx Abvew - Interface : Ethernet / RS232 / USB / PCMCIA - 3 colors status lamp - Rotating tool motor on : S2,S3,S5 - Rotating guide bush - Parts catcher - Ejection of workpiece - Coolant tank * with high-pressure pump : HP MÜLLER CL2 80 [bars] - Bar loader : IEMCA ELITE 112/33 - Oil mist extractor : ELBARON - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: ready for operation (used), Year of construction: 2006, bar diameter (max.): 10 mm, controller manufacturer: FANUC, controller model: 16i-TB, number of axes: 9, Swiss type turning machine manufactured in 2006. This TORNOS DECO 10a features an automatic and integrated bar loader with a maximum bar length of 3.2 m and a bar capacity ranging from 2 to 10 mm. It includes a Robobar SSF 3m loading magazine and is equipped with a FANUC 16i-TB control system. If you are looking to get high-quality turning capabilities, consider the TORNOS DECO 10a machine we have for sale. Contact us for further details. • Overhauled in 2016: • Checked machine, ball screws (replaced if necessary), guides, guide bushing, main and counter spindles • Complete cleaning • Maintenance carried out in accordance with Block 3 • Replacement of all drive belts • Barriers, relays, filter mats replaced • Reference points adjusted • Configuration/features: • Moving headstock • Directed spindle stop (S1) • Independent counter spindle (S4) • 9 axes with C1 and C4 and Transmit • 1 cross slide with 4 tool holders • Sensor for tool breakage detection Additional equipment • Automatic and integrated bar loader (oil bath) TORNOS-BECHLER Type SSF-210, equipped with Robobar SSF 3 m loading magazine • Max. bar length: 3.2 m • Bar capacity: min. 2 mm, max. 10 mm • Max. diameter without bar preparation: 8 mm (without clamp) • “HYBRIDE 10+5” drum with: • 14 guide holes for 1–4 mm • 14 guide holes for 4.1–10 mm • Loading magazine with drum Iodsytcalopfx Abvehw • Integrated 25 L hydraulic unit with filter • Front/rear support foot, center height 1100 mm • Electrical control box (diagram 112.20.300) • Motor voltage 400 V, control voltage 24 V • Color: Anthracite RAL 7016 / Gray RAL 7035 Technical Specification Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2000, bar diameter (max.): 7 mm, number of axes: 9, Swiss type turning machine manufactured in 2000. This TORNOS Deco 10a features a movable headstock, independent counter spindle, and a pivoting workpiece holder. It includes a loading magazine with a drum and a lubrication device for guide bushing. If you are looking to get high-quality turning capabilities, consider the TORNOS Deco 10a machine we have for sale. Contact us for further details. • Movable headstock • Directional spindle stop S1 • Cross slide with 4 tool holders T11–T24 with vertical and horizontal movement • Independent counter spindle • Pivoting workpiece holder on the counter spindle • Lubrication device for guide bushing with filter • Motorization S2 • Integrated 25-liter hydraulic unit with filter • Electrical control box • Motor voltage 400 V • Control voltage 24 V Ihodpfx Aeyr Nfljbvow • Drive motor n = 12,000 rpm Additional equipment • Loading magazine with drum (bar feeder) • “HYBRIDE 10+5” drum with 14 guide tubes for 1–4 mm bars and 14 guide tubes for 4.1–10 mm bars (no bar preparation up to 8 mm) • 3 pre-settable turning tool holders • 4 fixed tool holders • Tapping attachment for collet chuck ESX 12 • Front/rear support foot, center height 1100 mm Technical Specification Counter Spindle No

Condition: ready for operation (used), Year of construction: 2006, controller manufacturer: FANUC, controller model: 16i-TB, This TORNOS DECO 10a was manufactured in 2006. It features an integrated bar loader with a maximum bar length of 3.2 m and a bar capacity ranging from 2 to 10 mm. The machine includes a Robobar SSF 3m loading magazine and a FANUC 16i-TB control system, ensuring precise and efficient operations. Ideal for intricate Swiss-type turning tasks. Contact us for more information about this machine. 2 similar machines available! Additional information Ihjdpfx Ajx D Dliobvjw • Maximum bar length: 3200 mm • Bar capacity: Minimum 2 mm, Maximum 10 mm • Max diameter without preparation: 8 mm (without clamp) • Motor voltage: 400 V • Control voltage: 24 V • Independent counter spindle (S4) • FANUC 16i-TB control system • 1 cross slide with 4 tool holders • Sensor for tool breakage detection • Center height: 1100 mm • Automatic and integrated bar loader with oil bath • Robobar SSF 3m loading magazine • Front/rear support foot • "HYBRIDE 10+5" drum with 14 guide holes for 1-4 mm and 14 guide holes for bars 4.1-10 mm without bar preparation up to 8 mm • Electrical control box • Integrated 25-liter hydraulic unit with filter • Moving headstock • Directed spindle stopOptional: Comprehensive package of measuring instruments

Condition: ready for operation (used), Year of construction: 2003, bar diameter (max.): 10 mm, number of axes: 9, This TORNOS DECO 10a was manufactured in 2003. It features a movable headstock, directional spindle stop, and multiple cross-slides with tool holders for versatile machining. Equipped with a counter-spindle and programming software in five languages, it's ideal for complex turning tasks. Includes interfaces for bar feeders and tool breakage detection. Reach out for more information about this machine. Additional information • TB-DBCO Version 6 programming software: Single-user product, configuration available in 5 languages (French, German, English, Italian, Spanish) • Programming language: ISO programming language Iodpfx Ajx D Dm Hsbvohw • Movable headstock: S1/Z1 axis, n = 16000 rpm, F13 collet chuck • Spindle stop: Directional spindle stop S1 (programming increment 0.1 degrees) • Cross-slides: • 1 cross-slide with 4 tool holders (X1 and Y1 axes) • 1 cross-slide with 3 tool holders (Z3 and X3 axes) • 1 cross-slide with horizontal and vertical movement (Z4 and X4 axes) • Pneumatic cylinders: 3 independent for quick positioning • Counter-spindle: Independent (S4), n = 12000 rpm, F13 collet chuck • Cross Slide Support Options: • Pre-adjustable turning tool holder, long type, 8x8 mm cross-section • Main spindle rotation direction: right • S2 motorization (electric/mechanical) for driven units on the X2-Y2 linear tool carrier • Driven end drilling/milling unit: Max. speed 12000 rpm • Cross drilling/milling/tapping attachment for BSX 12 collet chuck • Sensor: Tool breakage detection with TYPE MIDI-DETECTOR, oscillating probe type MINI-DETECTOR, electrical interface, pneumatic control equipment • Interface: Adapting an LNS bar feeder • Spinde Speed: n = 16000 rpm indicates the machine has a moderate spindle speed ional: Comprehensive package of measuring instruments Technical Specification Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2010, bar diameter (max.): 10 mm, number of axes: 9, This TORNOS DECO 10a was manufactured in 2010. It features a movable headstock, directional spindle stop, and cross slides with tool holders. It includes an independent counter spindle, a pivoting workpiece holder, and a lubrication device. The machine also comes with a loading magazine, integrated hydraulic unit, and an electrical control box. If you are looking to get high-quality turning capabilities consider the TORNOS DECO 10a machine we have for sale. Contact us for more information. Additional information • Cross slide with 4 tool holders T11-T24 with vertical and horizontal movement • 3 pre-settable turning tool holders • 4 fixed tool holders • Movable headstock • Directional spindle stop S1 • Independent counter spindle • Pivoting workpiece holder on the counter spindle • Lubrication device for guide bushing with filter • Tapping attachment for collet chuck ESX 12 • Loading magazine with drum • Integrated 25-liter hydraulic unit with filter • Front/rear support foot, center height 1100 mm • "HYBRIDE 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars without bar preparation up to 8 mm • Electrical control box Ihsdpjx D Dmtsfx Abvow • Motor voltage 400 V • Control voltage 24 VOptional: Comprehensive package of measuring instruments Technical Specification Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2000, spindle speed (max.): 12,000 rpm, bar diameter (max.): 10 mm, number of axes: 9, This TORNOS DECO 2000 swiss type turning machine was manufactured in 2000. It features a movable headstock, directional spindle stop, and cross slides with tool holders. Includes an independent counter spindle, lubrication device, and a loading magazine with drum. Equipped with a "HYBRIDE 10+5" drum for bars up to 10 mm and an integrated hydraulic unit. Contact us for more information about this machine. Additional information • Electrical control box • Motor voltage: 400 V • Control voltage: 24 V • Movable headstock • Cross slide with 4 tool holders T11-T24 with vertical and horizontal movement • Pivoting workpiece holder on the counter spindle • Directional spindle stop S1 • 3 pre-settable turning tool holders • 4 fixed tool holders • "HYBRIDE 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars without bar preparation up to 8 mm • Independent counter spindle Ijdpfx Ajx D Dmysbvshw • Tapping attachment for collet chuck ESX 12 • Lubrication device for guide bushing with filter • Loading magazine with drum • Integrated 25-liter hydraulic unit with filter • Front/rear support foot, center height 1100 mmOptional: Comprehensive package of measuring instruments Technical Specification Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2007, bar diameter (max.): 10 mm, number of axes: 7, This TORNOS DECO 10e was manufactured in 2007. A Swiss type turning machine featuring a movable headstock, directional spindle stop, and multiple tool holders for versatile operations. Includes an independent counter spindle, lubrication device, and a loading magazine with drum. Ideal for precision turning with a lathe capacity of 10 mm. Consider the opportunity to buy this TORNOS DECO 10e Swiss type turning machine. Contact us for more information. 2 similar units available!Additional information • Movable headstock • Directional spindle stop S1 • Cross slide with 4 tool holders T11-T24 with vertical and horizontal movement • Independent counter spindle • Pivoting workpiece holder on the counter spindle • Lubrication device for guide bush with filter • 3 pre-settable turning tool holders • Motorization S2 • Tapping attachment for collet chuck ESX 12 • 4 fixed tool holders • Loading magazine with drum • Integrated 25-liter hydraulic unit with filter • Front/rear support foot, center height 1100 mm • "HYBRIDE 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars without bar preparation up to 8 mm Iodpox D Dmmofx Abvehw • Electrical control box • Motor voltage 400 V • Control voltage 24 V • Lathe capacity 10 mmOptional: Comprehensive package of measuring instruments Technical Specification Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2010, bar diameter (max.): 10 mm, number of axes: 7, This Tornos DECO 10e was manufactured in 2010. A Swiss type turning machine featuring a movable headstock, directional spindle stop, and independent counter spindle. It includes a loading magazine with drum and an integrated 25-liter hydraulic unit. Ideal for precise small-scale turning, this machine also supports bar sizes from 1 to 10 mm without preparation up to 8 mm. Contact us for more information about this machine. Additional information • Electrical control box • Cross slide with 4 tool holders T11-T24 with vertical and horizontal movement • 3 pre-settable turning tool holders • 4 fixed tool holders • Tapping attachment for collet chuck ESX 12 • Movable headstock • Independent counter spindle • Pivoting workpiece holder on the counter spindle • Lubrication device for guide bushing with filter • Loading magazine with drum • Integrated 25-liter hydraulic unit with filter • Front/rear support foot, center height 1100 mm • "HYBRIDE 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars without bar preparation up to 8 mm • Motor voltage 400 V • Control voltage 24 V • Drive motor n = 12000 rpmOptional: Comprehensive package of measuring instruments Technical Specification Ihsdpex D Dndefx Abvow Counter Spindle Yes

Condition: good (used), Year of construction: 2001, Machine is in good working condition. Parts shown by hand not come. Iodeym T D Uspfx Abvohw

Condition: excellent (used), As-new tool holders for DECO 20 - DECO 26 4 pcs - TORNOS static tool holders For X1Y1; X2Y2; X4Y4 ----- - Turning tool holders for 16x16 mm tools: - Price per holder: €180.00 each For DECO 2000 ø20 & 25mm Ihedpfjh Uulkex Abvjw DECO 20 and DECO 26 3 with front plate 1 without front plate ----- Shipping within Germany: €12.00 Shipping within the EU: €25.00 Additionally, we have 6 spindle reduction inserts: Were used in DECO 26mm Internal ø 8.0mm; ø 12.0mm; ø 21.0mm; 3x ø 26mm Outer ø 30mm, thread M32x1.5, length approx. 360mm Flange outer ø 45mm x 9mm, 4x M4 threaded holes 2x 8mm slots Special price for all 6 reductions including shipping: €380.00 Images can be provided upon request – we kindly ask for your email address.

Condition: used, TORNOS Micro 8 is a CNC automatic lathe engineered for high-precision machining with strong accuracy and reliability. Working capacities: 5 axes, workpiece length max 20 mm, max bar diameter 10 mm; collet tapers W15 (spindle) and F13 (back spindle). Key specs: stepless spindle 0–12000 t/min; rapid traverse X 20 m/min, Y 40 m/min, Z 20 m/min; spindle/back-spindle motors 2.2/3.7 kW; 3x400 V 50 Hz; total power 8 kVA; weight ~1600 kg; dimensions 1670×870×1650 mm. Equipment: LNS TRYTON 112 bar feeder, lamp, coolant system, oil mist extractor, RS232 interface, status light. Delivers tight tolerances; suited to automotive, watchmaking, machine tools, aerospace and medical sectors. Iedpfex S Nwcjx Abvjhw

Condition: used, TECHNICAL DETAILS Selling price : 15.000 € HT Ihsdpfx Abewugxisvew

Condition: used, TECHNICAL DETAILS - Number of axes : 10 Ihedpfx Absvm Dx Ssvew - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 10 [mm] - Max. machining length : 100 [mm] - Spindle speeds : 14000 [rpm] - Spindle power : 10.1 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 10 [mm] - Spindle speeds : 14000 [rpm] - Spindle power : 7 [kW] - C axis indexing precision : 0.001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 8 GUIDE BUSH HOLDER 2 - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 12000 [rpm] END ATTACHMENT - Number of positions : 3 - Number of motorized positions : 3 - Live tools speed : 12000 [rpm] SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 9000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1850X1140 [mm] - Machine height : 1800 [mm] - Machine weight : 1650 [kg] MACHINE HOURS - Number of working hours : 47317 [h] EQUIPMENT - CNC : Fanuc 31i-B5 - Interface : Ethernet / RS232 / USB / PCMCIA - 3 colors status lamp - Rotating tool motor on : S2,S3,S5 - Rotating guide bush - Parts catcher - Ejection of workpiece - Coolant tank * with high-pressure pump : HP MÜLLER CL2 80 [bars] - Bar loader : IEMCA ELITE 112/33 - Oil mist extractor : ELBARON - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.