Used Decoiler for sale (302)

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei Gbjdowirp Nepfx Adbsi 11800 € 226.56 € 2500 kg 1300 mm 450 - 550 mm 400 mm 50 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Alternative: Variant with pneumatic pressure arm (CMC P3 2500 400 M D1300) € 14.500,--

Condition: good (used), load capacity: 200 kg Gjdpfxjh Rfhhe Adbsbi material width: 300mm coil inner diameter: 240-580mm Coil outer diameter: 1200mm

Condition: new, Year of construction: 2025, neu 2025 070116 Gjdowv H Awepfx Adbebi prompt, Zwischenverkauf v Türkei 10900 € 209.28 € 1 1250 kg 1300 mm 450 - 550 mm 400 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control WITH PNEUMATIC DOWNHOLER

Condition: ready for operation (used), Year of construction: 2012, 8 Ton Rewinder, Used Machine Gjdpfx Asupr Ngodbsbi Overall dimensions: 2140 x 930 x 1070 mm Weight: 416 kg Minimum closing of the rewinder: 430 mm Maximum opening of the rewinder: 540 mm Max. load capacity: 8000 kg

Condition: new, functionality: fully functional, Year of construction: 2025, control type: PLC-controlled, degree of automation: automatic, actuation type: manual, coil inner diameter: 510 mm, coil weight: 6,000 kg, coil width: 1,500 mm, power: 4 kW (5.44 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, Brand New 6T-1250 Hydraulic De-coiler 6-ton X1250MM hydraulic tensioning, power feeding, with loading trolley and pressure arm Hydraulic tensioning of steel coil inner hole, oil pump power: 2.2KW Inner diameter of steel coil: 510 ± 30mm, maximum outer diameter of steel coil: 1500mm Load bearing capacity: Max 6 tons Core shaft diameter: 203mm Side panel: A3 panel, integral, side panel thickness 18mm Steel coil width Max.1500mm Wedge type tensioning, 4 claws Rotating oil cylinder, with the core shaft rotating simultaneously Gear head reduction motor, motor power 4.0KW, matched with main machine forming speed 25M/min Delta inverter Gedpfew Nfi Uox Adbjbi The pneumatic clamping arm at the top of the feeding machine prevents the steel coil from loosening, and the air valve control action is controlled by electronic control Direction of the compression arm: When facing the core axis, the compression arm is on the right side; Self stop device controls the start and stop of steel coil rotation 6-ton feeding machine trolley 4-column design The car is moving on the I-beam at the bottom of the feeding machine Up and down travel distance of the car: Max 350mm Front and rear travel distance of the car: Max. 2000mm Voltage: 380V/50Hz/3Ph

Condition: new, functionality: fully functional, Year of construction: 2025, control type: PLC-controlled, degree of automation: automatic, actuation type: manual, coil inner diameter: 510 mm, coil weight: 6,000 kg, coil width: 1,500 mm, power: 4 kW (5.44 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, Brand New 6T-1250 Hydraulic De-coiler ITEM I : 6-ton X1250MM hydraulic tensioning, power feeding, with pressure arm. Hydraulic tensioning of steel coil inner hole, oil pump power: 2.2KW Inner diameter of steel coil: 510 ± 30mm, maximum outer diameter of steel coil: 1500mm Load bearing capacity: Max 6 tons Core shaft diameter: 203mm Side panel: A3 panel, integral, side panel thickness 18mm Steel coil width Max.1250mm Wedge type tensioning, 4 claws Rotating oil cylinder, with the core shaft rotating simultaneously Gear head reduction motor, motor power 4KW, with a forming speed of 25M/min in conjunction with the main engine Delta inverter The pneumatic clamping arm at the top of the feeding machine prevents the steel coil from loosening, and the air valve control action is controlled by electronic control Customer provided gas source Direction of the compression arm: When facing the core axis, the compression arm is on the right side; Self stop device controls the start and stop of steel coil rotation Other terms 1. Voltage standard: 380V/50HZ/3Ph 2. Operation nameplate: English/Chinese 3. Paint color: Uncoiler body RAL5015 (blue) Godpfx Ajw Nqi Hjdbebi Oil cylinder: red; Uncoiling mechanism

Condition: ready for operation (used), BTO 215 spring coiling machine + AB1 decoiler cap wire diameter: 0,4 1,5 mm winding diameter: max 45 mm max spring length: 100 mm max length of leg: 60 mm speed: 80 m/min power: min 3 kW / max 5,2 kW Gbedewrt T Uspfx Adbsi length: 1300 mm width: 900 mm height: 2000 mm weight: 700 kg

Condition: used, Year of construction: 1993, Price: On request Coil feed line system, straightener, decoiler Manufacturer: ARKU Year: 1993 Decoiler Type: AH 5000/500/MSG-4Q Capacity: 5000kg Working width: 50-500mm Speed: 50 m/min Max coil-diameter: 1800mm Straightener Type: RM 3060.4/9 Number of rolls: 9 Diameter rolls: 30 Capacity: 0,5-6mm Working width: 50-600mm Speed: 50 m/min Needs new PLC (controller in cabinet). Is taken by previous owner for programm. - Year: 1993 - Documentation available: No - CE certificate present: No - Min. sheet thickness [mm]: 0.5 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 600 - Number of rolls [pcs]: 9 - Roll diameter [mm]: 30 - Rolling speed [m/min]: 50 Financial information VAT: The price shown is exclusive of VAT Gjdpfxewng Uke Adbsbi VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2021, condition: ready for operation (used), total height: 1,300 mm, product length (max.): 4,500 mm, Pipe Production Line manufactured in 2021. This Bazhou Wanxin machine features a dual-station decoiler, hydraulic shear and butt-welding machine, and a cold saw for precise cutting of pipes. It accommodates round pipes with diameters from Ø16-63.5 mm and offers a feeding speed of up to 120 m/min. Consider the opportunity to buy this Bazhou Wanxin Pipe Production Line. Contact us for further details. • Dual-station decoiler • Function: Passively unwinds the coil • Construction: Dual-station with 180° rotation; manual expansion • Advantage: Fast loading, simple operation • Hydraulic shear and butt-welding machine • Function: Cuts front/rear strip ends, centers, and re-welds • Construction: Manual hydraulic shear with boom; front/rear pressure rollers; front/rear centering rollers; welding device • Cutting method: Hydraulic shear • Pressing method: Double-cylinder press • Welding method: Manual welding • Coil accumulator • Function: Ensures continuous production during strip changeover • Construction: Frame type with movable and fixed frames (incl. feeding device) • Feeding speed: max 120 m/min • Storage speed: max 200 m/min • Stored strip length: 200–400 m • Pinching roller motor: AC 11 kW • Forming and calibration machine • Working height: +850 mm • Main drive power: AC/DC motor 160 kW, 1000–2000 rpm; reducer: gear-hardened; gearbox: spiral bevel gear • Entry/formation: Passive 5-roll straightener; vertical rolls for strip feeding; forming via 7 horizontal + 8 vertical roll stands • Guiding/pressing/deburring/cooling/calibration: 6 horizontal + 5 vertical roll stands; 1 round calibration stand • Round calibration stand: 1 smoothing device; 2 sides with 8 rolls (4 per side); Ø30 mm rolls, 40Cr, quenched/tempered/hardened • Horizontal roller shaft: Ø60 mm, bearing position 55, material 40Cr; surface hardening HRC 50–55 • Vertical roller shaft: Ø40 mm, material 40Cr, quenched/tempered/hardened • Bearing slider: Forged steel 45# • Stand style: Gantry type; opening width 120 mm; horizontal stand clamping adjustable via worm gear • Stands material: Welded, aging annealed • Pinching roller shaft: Ø50 mm, 2 rollers, manual screw adjustment • Guide shaft: Ø40 mm • Deburring knife: 2 pcs (1 in use, 1 spare) • Cooling tank: Included • Cold saw (Type KK-5-50) • Function: Cuts pipes to preset length at line speed • Pipe diameter: Round Ø16–63.5 mm (and corresponding square/rectangular) • Cutting length: 1–6 m • Material thickness: 0.6–2.5 mm • Saw motor: 11 kW AC with frequency inverter • Feeding motor: 2.9 kW servo (Yaskawa) • Drive motor: 11 kW servo (Yaskawa) • Feeding mode: Servo multi-stage speed Gedsyhfvlepfx Adbebi • Speed following: max 110 m/min • Clamping: Pneumatic • Saw blade: Ø400 mm • Saw reducer: Model KK-80 • Sawing stroke (rack length): 3 mNote • The technical data and descriptions are transcribed from the original order confirmation and are for informational purposes only; they are not binding. Additional equipment • Conveyor track, table, and packing machine • Function: Automatic pipe transfer from mill to table; packages into hexagonal bundles • Roller track length: 16 m • Drive: 1 motor YCT200-4A, 5.5 kW

Condition: ready for operation (used), Year of construction: 2012, This PRESSIX Pressix 25 CNR 4 was manufactured in 2012. Ideal for high-precision stamping, blanking, and continuous strip processing, it includes a manual decoiler, servo roller feeder G+K WVS/L 150, and a motorized recoiler. Consider the opportunity to buy this PRESSIX Pressix 25 CNR 4 mechanical stamping press. Contact us for more information. • Suitable for: High-precision stamping, blanking, washers, discs, continuous strip processing Additional equipment Gbedpfex E Ea Hjx Adbji • Manual decoiler • Servo roller feeder: G+K WVS/L 150 • Motorized recoiler

Condition: ready for operation (used), Year of construction: 2010, controller manufacturer: FANUC, This ESCO Escomatic EC12 was manufactured in 2010. A Swiss type turning machine, it's ideal for precision and efficiency in small part production. Contact us for more information about this machine. Additional equipment • 3x automatic bar feeders • 1x decoiler unit Machine Benefits Technical Machine Benefits Gjdpfjyar E Rsx Adbsbi • Bar capacity (through spindle): up to 12 mm • Rated power: 15 kva • Rated current: 32 a • Working voltage: 3-phase, 400v / 50hz • Control voltage: 24v dc • Type of current: ac • Lighting voltage: 24v dc Extra Information 3x identical, fully functional machines available Additional spare parts are also included

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 97862034, installation height: 255 mm, sheet thickness (max.): 5 mm, working width: 180 mm, pressing force: 100 t, stroke length: 50 mm, TECHNICAL DETAILS Pressing force: 100 t Total force: 1,000 kN Ring serration force: 40 - 310 kN Counter-holder force: 10 - 270 kN Maximum material width: 180 mm Maximum material thickness: 5 mm Strokes per minute (min.): 20 rpm Strokes per minute (max.): 80 rpm Stroke: 50 mm Feed unit Maximum strip thickness: 5 mm Maximum strip width: 180 mm Maximum feed length per ram stroke: 999.9 mm Tensile force per feed (starting force): 6 kN Clamping force: max. 19 kN Maximum feed height adjustment: +40 mm Maximum distance between feed rollers: 20 mm Resolution (per rollers): 0.1 mm MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Connected load: 13.5 kW Pump power: 3 kW Motor power: 3 kW Air connection: 6 bar Height adjustment type: hydraulic Dimensions & Weight Dimensions (H x W x D): 2,420 x 2,325 x 1,665 mm Installation height: 255 mm Weight: approx. 6 t Godpfx Adsytcd Robebi Year of last overhaul: 1997 EQUIPMENT Decoiler unit Two tool sets Note: Further technical details on the machine can be found in the attached operating manual.

Condition: good (used), Straightening machine, wire straightening machine, unwinder, straightening machine combination, pay-off reel, wire unwinder, double reel, reel, pay-off reel, motor-driven reel for wire processing, punch, eccentric press, hydraulic press, punching machine, motor reel, winding roll, unwinder, wire unwinder -Wire straightening machine: decoiler-straightener combination -Type:not visible -Note: without documentation -Engine: Fukota 1.5 kW -Straightening rollers: for Ø 20 mm, see photos -Receiving rollers: Ø 152/215 x 1330 mm Gbodpfx Ajin Rn Aedbei -Total dimensions: 3040/2450/H2525 mm -Weight: 2080 kg

Condition: like new (used), Year of construction: 2016, functionality: fully functional, number of straightening rollers: 7, coil weight: 3,000 kg, coil outer diameter: 1,400 mm, roller diameter: 60 mm, number of feed rollers: 4, conveyor belt width: 300 mm, Decoiler: Dimeco 2371B Gbedpfx Adeyr Dqpebsi Serial number: 43124/1/1 Coil weight: 3 tons Coil width: 485mm Internal coil diameter: 445-525mm Coil diameter: 1400mm Weight: 1700kg Straightener: 1675/B Serial number: 316000256 Coil width: 300mm Recommended thickness full width (300N/mm²): 2.5mm Roll diameter: ø60mm Number of straightening rolls: 7 pcs Number of feeding rolls: 4 pcs Weight: 500kg Roll feeder: Dimeco 1082/B Serial number: 316000257 Working width: 310mm Maximum thickness: 3mm Thickness at full width: 2.75mm Roll diameter: ø80mm Speed: 100m/min Weight: 260kg Year of manufacture: 2016 Cross-section area: 850mm² Simatic HMI Touch control Pneumatic pressure arm Variable speed GRS guide BGV basket

Condition: used, Year of construction: 1985, Decoiler Decoiler with arm: 1,5 ton Material width: 350 mm Coil exterior diameter: 1.200 mm Expansion range: 370 - 430 mm Speed: 0 - 20 m / min Leveller / Straightener Material width : 250 mm Number of levelling rolls: 9 pcs. Diameter of the levelling rolls: 30 mm Material thickness: 0,5 - 6 mm Cross section: 1.200 mm Feeding speed: 20 m / min Godpsxdl Nisfx Adbjbi Required power: 18 kW Standard configuration - Pneumatic clamp roller- Manual disc brake

Condition: used, Year of construction: 1973, material width 650 mm coil weight 2,0 t coil internal dia. 380 - 520 mm coil outside dia. 1500 mm speed 20 m/min Power capacity 2,0 kW Weight 1,4 t Dimensions (WxDxH) 1,6 x 1,6 x 1,6 m decoiler H 2 Gbodpfeymp Szjx Adbsi with motor, hydraulic expansion, hydraulic snubber roll, coil loop control

Condition: used, Year of construction: 1990, material width coil line 650 mm coil weight 2 x 3,5 t coil internal diameter 460 - 530 mm coil external diameter 1500 mm material thickness coil line 0,8 - 3,0 mm Gsdpfxsvuudue Adbjbi no. of straightening rolls 7 no. of rolls at in- and outlet 4 roll diameter 80 mm feed length 0 - 500 mm power requirement 10,0 kW weight 10,0 t dimensions of the coil line 8,8 x 4,0 x 2,55 m Straightening machine Dimeco, 1676 EV with inlet table and pre-shaping roll, hydraulic loading bridge Double decoiler Dimeco 2382 FFPS with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll, coil loading device elektronic roll feed Microfeed 1140 E with DC-drive, pneumatic intermediate lifting of the rolls can only be offered without putting into operation - video at seller's site before dismantling available

Condition: used, Year of construction: 1997, functionality: unexamined, total height: 2,500 mm, total length: 33,223 mm, total width: 2,000 mm, table width: 700 mm, input frequency: 60 Hz, input voltage: 460 V, table length: 5,000 mm, table height: 1,200 mm, control cabinet width: 600 mm, control cabinet length: 1,500 mm, control cabinet height: 2,500 mm, compressed air connection: 5.5 bar, Stud & Track Rollforming Machine With 4.5 Tonnes Decoiler & Crane 5 Tonnes Capacity - Fully Dismantled - Ready to be transported MACHINE MANUFACTURER: BRADBURY UK GENERAL SPECIFICATIONS STUD LINE MATERIAL : GALVANIZED COLD ROLLED STEEL Godpexya Hzefx Adbebi MATERIAL STRENGTH : 85.000 PSI MAX YIELD STRENGTH 55.000 PSI MIN· YIELD STRENGTH THICKNESS: 20 GA. TO 16 GA.-"HEAVY GAUGE" 22 GA. TO 25 GA.-"LIGHT GAUGE" ENTRY COIL WEIGHT: 10.000 LB MAX ENTRY STRIP WIDTH: 12" MAX C APPROX. 5" MIN C APPROX. ENTRY COIL I .D: 20" MAX ENTRY COIL O.D: 72" MAX EFF. LINE SPEED : l20-150 FPM-"HEAVY GAUGE" 175-250 FPM-"LIGHT GAUGE" ROLLFORMER SPEED: 120-250 FPM PASS LINE HEIGHT: 51" LINE DIRECTION : RIGHT TO LEFT MODE OF OPERATION : PREPUNCH/POSTCUT CUT LENGTH : 20' MAX. 5· MIN GAUGE" : 90 % C APPROX. ) OF PRODUCT iON < i 6' LENGTH TOLERANCE : •/- 1/16" AT 250 FPM MAIN POWER : ELEC : 460 VOLTS 60 HERTZ 3 PHASE 192.2 FLA : AIR : 80 PSI MIN. CLEAN 6 DRY : HYO : 1500 PSI WORKING PRESSURE CONTROL : 115 VOLT AC AIR CONSUMPTION: 2 CFM MAX. AT 80 PSI

Condition: excellent (used), Sheet width - max.: 200 mm Straightening roller diameter: 40 mm Number of straightening rollers: 5 Driven infeed and outfeed rollers Sheet thickness - min.: 0.4 mm Sheet thickness - max.: 2.0 mm Gsdpfxjylc S Ss Adbebi Weight: 170 kg Infinitely variable feed speed Right and left rotation Operating mode selector switch for manual and automatic operation Belt loop control Very good condition A decoiler can also be purchased.

Condition: used, Year of construction: 1979, material width 150 mm coil weight 1,5 t coil internal diameter 500 mm coil external diameter 940 mm strip material 20 x 1,0 - 50 x 4,0 / 200 mm wire diameter 1,0 - 5,0 mm power requirement 0,7 kW weight 0,7 t Dimensions (WxDxH) 1,0 x 1,7 x 2,0 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck Godpfeylclxjx Adbjbi motoric driven palett decoiler band material approx. 20 x 1,5 mm - 50 x 4,0 mm / 200 x 2,0 wire diameter approx. 1,0 - 5,0 mm

Condition: excellent (used), functionality: fully functional, Motorized decoiler Manufacturer: GSW Model: AHM 3000 h Gjdpsylychsfx Adbsbi Condition: very good Decoiler weight: 750 kg Max. coil weight: 3000 kg Coil width: 600 mm Coil inner diameter (min.): 380 mm Coil inner diameter (max.): 530 mm Motor power: 2.2 kW Hydraulic pump power: 0.75 kW Rotation speed: 17 rpm Dimensions (W / L): 1100 / 2000 mm

Condition: good (used), Schuler PE4s 50/800 high-speed press  Manufacturer: Schuler   Type: PE4s 50/800 High speed press 61/21 600/3 pressing force: 50 t throat depth: 800 mm Stroke rate /min: 125-300 slide stroke: 40 mm Kohler decoiler 500.1 M After the purchase you will also get the documentation We sell a large number of paternosters. In addition to approx. 50 paternosters, there are countless other machines available. After purchase the amount is due within 7 working days. Gedpfsgryc Nox Adbobi Please also note our other offers. Have fun browsing and buying. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, Hego cut-to-length line Working width 500x2mm Speed 10-12m/min Mechanical decoiler max. 1000kg Coil inner diameter 400/508mm Gbsdpfxsvk D Alo Adbei Straightening machine with 9 straightening rollers and 2 feed rollers and film unwinder The offer is aimed exclusively at traders within the meaning of §14 BGB no sale to private customers!

Condition: used, Year of construction: 1988, Ref. No.: Lg 35526 KOHLER Strip Processing Line 18.260/19 - 1000.2H used Year of manufacture: 1988 Direction of operation: left to right Loading side: front Comprising: Double decoiler 1000.2H Load capacity: max. 1,000 kg per side Strip width: max. 260 mm Mandrel expansion range: 460 – 520 mm Outer diameter: max. approx. 1,200 mm Straightening Machine 18.26019 Passage width: max. 260 mm Godpfsyb A Swox Adbobi Number of straightening rollers: 19 pcs Roller diameter: 18 mm Straightenable material thickness: 0.3 – 1.5 mm Drive power: approx. 7 kW Speed: 0 – 40 m/min Roller adjustment: motorized (2-point) Used, as-is, ex stock, immediately available. Overhaul available on request. Delivery time by arrangement. Further data to follow or upon request. All information is based on manufacturer’s data and is non-binding for us – Subject to prior sale and errors excepted.

Condition: excellent (used), Year of construction: 2007, Pressing force: 2,000 kN Table size: 2,300 x 1,100 mm (W x D) Pass-through opening: 2 pcs. 700 x 300 mm Distance between uprights: 2,460 mm Ram clamping area: 2,300 x 1,100 mm Lateral clearance: 740 mm Die height: 550 mm (ram down, adjustment up) Stroke rate: 30 - 140 strokes/min, steplessly adjustable Stroke: 20...220 mm Ram adjustment: 150 mm (motorized) Main drive: 30 kW Weight: approx. 27,500 kg Features: • Siemens + Beckhoff control • 8-fold slide guide • Motorized oil circulation lubrication • Automatic ram adjustment • Hydraulic overload protection • Pneumatic ram counterbalance • Electromechanical stroke adjustment • Siemens + Beckhoff control system • Beckhoff panel visualization • T-slots in table and ram (28 mm, spacing 300 mm) • Vibration-damping machine feet • 4 pcs. tool safeties + 4 pcs. cam outputs • Ram with 20 mm wide central slot • Hydraulic tool clamping on table and ram • Hydraulic roll blocks for tool change Coil line by Kemmerich, consisting of: Decoiler Type: V 5000 A – SH – 600 - S Load capacity: 5,000 kg Coil width: 100 - 600 mm Expansion range: 470 – 520 mm Coil outside diameter: 2,000 mm • Motorized auxiliary drive • Pneumatic disc brake • Hydraulic expansion by wedge segments • Rear support disc and 3 attachable limiting arms at front • Hydraulically actuated and driven hold-down roller, laterally adjustable by handwheel • Load carriage (stationary, decoiler moves hydraulically), lifting height 770 mm with 4 limiting bars Straightening machine Type: RMBMZ 50.600 UF Coil width: 40 - 600 mm Coil thickness: 0.5 – 4.0 mm Max. cross-section: 1,200 mm² Number of rollers: 9 pcs. Roller diameter: 50 mm Number of feed rollers: 2 pcs. Feed roller diameter: 100 mm Speed: 3 - 25 m/min Features: • Rollers hardened, ground and hard chromed • Drive of lower straightening rollers and feed rollers via gear transmission • Motorized roller frame adjustment, precision 1/100 mm, settings storable • Upper rollers ventable by 100 mm • Feed roller pneumatically ventable • Lateral strip guidance at entry with handwheel and leadscrew • Outlet roller basket and loop bridge • Loop control via ultrasonic sensor • Hydraulic introduction aid, consisting of table with extendable tongue and upper bending roller Roll feed Godpjv T Anlofx Adbebi Coil width: max. 600 mm Features: • Rollers hardened, ground, and chromed • Driven by gear motor • Upper roller hydraulically ventable • Height adjustment hydraulic • Lateral strip guidance at entry with handwheel • Roller basket Additional features: • Pneumatically swiveling loop bridge between straightener and feeder • Safety fence around the entire line • Decoiler and straightener on common base frame • Various spare rollers for straightener The complete line can still be inspected under power at the current owner's site!