Used Deep Jaws for sale (4,431)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 106840-11, overall weight: 35,000 kg, The drilling process of the deep hole drilling machine uses single-lip drilling. The BW250-T is a deep hole drilling and milling center with two separate spindles for deep hole drilling and milling operations. The machining units are equipped with an additional common travel axis, allowing even smaller workpieces to be machined from four sides on the clamping table without resetting. Drilling and Milling Unit Information: - Number of spindles: 1 drilling spindle and 1 milling spindle - Spindle speed infinitely variable: 0 - 5000 rpm - Spindle drive power: 17 kW at 100% duty cycle S1 operation - Torque: 260 Nm at 100% S1 operation - Max. drilling depth: 1500 mm (in one pass without repositioning) - Drilling diameter: 4 - 40 mm based on ST 60 Kdsdpfjxmh Ersx Ag Nou Travel Paths: - X-axis travel: 2500 mm - Y-axis travel: 1500 mm - Z-axis travel: 850 mm - V-axis travel: 1000 mm Feed rates: - X-axis speed: 10000 mm/min - Y-axis speed: 10000 mm/min - Z-axis speed: 6000 mm/min Swivel Axis Setup for Drilling and Milling Unit: - The drilling and milling unit has a horizontal swivel range of -25° / +15° - 3x steady rests Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 2400 liters - 1x hinge belt chip conveyor - 1x hydraulic power unit and pneumatic unit/equipment - 1x central lubrication - 1x low-pressure pump: Pump output: 100 l/min Pump drive: 5.5 kW - 1x compact band filter: Filter output: 175 l/min For operations in: steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Delivery rate: 2 - 120 l/min Pump drive: 11 kW - 1x oil mist extraction, Extraction capacity: 2400 m³/h Tool magazine for conventional tools consisting of: - Tool change magazine with intermediate gripper - Tool holder HSK 63 - Max. permitted tool diameter: 127 mm - Max. permitted tool length: 400 mm - Tool storage spaces: 40 Clamping table with X-axis and NC rotary table: - Length/width: 1600 x 2000 mm - Useful load (centered): 15 t - Swing diameter for workpieces: 2800 mm Measuring Equipment - Tool breakage monitoring and length measurement of the BCM tools with automatic compensation in the control system Electrical Equipment Information: - 1x CNC control TNC 640 Failsafe Heidenhain - 1x drilling process monitoring - 1x remote maintenance - 1x dynamic collision monitoring - 1x handheld control device Connection Data: - Operating voltage: 3AC 400V ±10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 65 kW

Condition: used, 4 INGERSOLL adjustable chuck jaws for face plate Kdjdpfxsu Axzks Ag Nju Chuck jaws for lathe chuck, mechanical clamping device, clamping block No: 39.02.10000 / 501.397 Jaw width 70 mm Jaw length 180 mm Jaw carrier height 150 mm Base plate 325 x 265 mm - Stepped jaws for turning as turning and drilling jaws - Jaw adjustment via trapezoidal threaded spindle - Jaw carrier with 6 recesses 40 x 30 mm for fastening - Distance between recesses 280 x 133 and 220 x 90 mm (centered) Dimensions L x W x H 325 x 265 x 215 mm Weight per jaw 36.5 kg Weight of all 4 jaws 146 kg Good condition

Condition: excellent (used), functionality: fully functional, drilling depth: 1,000 mm, feed length X-axis: 1,650 mm, feed length Y-axis: 1,000 mm, travel distance Z-axis: 360 mm, spindle speed (max.): 4,200 rpm, drill diameter: 40 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, spindle motor power: 10,000 W, table length: 700 mm, table width: 1,400 mm, table load: 4,000 kg, feed length W-axis: 500 mm, Selca S4040D CNC Control Drilling depth, transverse movement V axis: 1,000 mm Column, longitudinal movement X axis: 1,650 mm Drilling slide, vertical movement Y axis: 1,000 mm Drilling slide, workpiece support movement W axis: 500 mm Drilling slide, maximum vertical "swivel" - A axis: +20° / –20° Rapid traverse, adjustable speed up to 10,000 mm/min Drilling diameter in solid material min/max: 5 – 40 mm Drilling spindle, rotational speed, adjustable: 1 – 4,200 rpm Drilling spindle motor power: 10 kW Fixed clamping table, dimensions: 700 x 1,400 mm Standard clamping slots: 18 mm Hydraulic pump motor power: 7.5 kW Gun drill holder; shank for drills > 6 mm: 10 x 40 mm Gun drill holder; shank for drills < 6 mm: 25 x 70 mm Clamping table ROTARY & "BARRASENO" axis B Dimensions mm: 800 x 1,000 Standard clamping slots: 18 mm Maximum axial load (rotary): 4,000 kg Continuous rotary axis B resolution: 360,000 steps/rev Maximum vertical resolution "BARRASENO" axis B1: +20° / –20° Small milling head – threading, etc. Maximum horizontal working stroke Z axis (830): 360 mm Spindle speed, adjustable up to 2,200 rpm Threading spindle motor power: 10 kW ISO40 tool changer with 10 rotary-translating stations Kdedpfx Agoxpwf Tj Nsu USED MACHINE

Condition: good (used), Year of construction: 1979, TBT T30-4-750/1000 Kdodpsd Ri H Eofx Ag Neu -drilling diameter ~30 -drilling depth 750/extension ~1000 -Tank -Pumps -loading equipment -Tailstock

Condition: excellent (used), Year of construction: 2009, operating hours: 20,709 h, 2 spindles Drilling data: Spindle 1 (4 kW) 5-18 mm Spindle 2 (1.2 kW) 1-4 mm Spindle speed: Spindle 1: 600 - 6,000 rpm Spindle 2: 2,000 - 24,000 rpm Drilling depth approx. 1,200 mm (with Ø8mm and use of 3 steadies) Rapid traverse 15,000 mm/min Kjdpfsww Ihqex Ag Nodu Carriage stroke 1,800 mm Machine weight: 7,500 kg

Condition: used, Year of construction: 1974, 414312067 voltage 380 V Kdedpfjw Syh Dex Ag Neu frequency 50 Hz rated capacity 13 kVA

Condition: excellent (used), 5 pieces of hard base with screwed-on aluminum jaws, suitable for a FORKARDT chuck, 250 mm Ø 1 set of inwardly stepped jaws: 190 - 250 mm 1 set of inwardly stepped jaws: 120 - 200 mm 1 set of jaws stepped outwards: 220 mm Ksdpfxofxu Tyj Ag Nedu 1 set of jaws stepped outwards: 100 - 250 mm 1 set of jaws stepped outwards: 120 - 300 mm 1 set of outwardly stepped jaws made of St: 120 - 260 mm 1 set of outwardly stepped jaws made of St: 140 - 240 mm

Year of construction: 2021, condition: used, Year of manufacture: 2021 New: No Empty weight: 347 kg Dimensions (LxBxH): 84 x 221 x 62 cm Attachment suited for: Loaders Ksdpow U Nd Tofx Ag Nsdu CE mark: yes General condition: very good Technical condition: very good Visual appearance: very good Condition CE type: CE Bobcat 193 cm tiller, Very little used!!

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, drilling depth: 1,000 mm, feed length X-axis: 900 mm, feed length Y-axis: 400 mm, feed length Z-axis: 300 mm, total length: 3,600 mm, total width: 3,300 mm, total height: 2,200 mm, workpiece weight (max.): 6,000 kg, overall weight: 6,500 kg, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 10,000 m/min, feed rate Z-axis: 10,000 m/min, spindle speed (max.): 6,000 rpm, CNC HEIDENHAIN 530 ROTARY TABLE: Work surface: 800 x 900 mm Fixing T-slots (quantity x width): 4 x 18 mm Maximum load allowed (rotating piece): 4.500 kg Maximum load allowed (fixed piece): 6.000 kg AXIS TRAVELS – WORK AREA: Transversal – deep V axis drilling: 1.000 mm Kdsdpfewamdijx Ag Nsu Longitudinal X axis: 900 mm Vertical Y axis: 400 mm Auto piece approach Z axis: 300 mm ADVANCEMENTS: Rapid X, Y, Z axes: mm/min 10.000 WORKING CHARACTERISTICS IN DRILLING WITH "CANNON" TIPS: Maximum drilling depth: 1.000 mm Deep drilling spindle rotation speed: 6.000 rpm Drilling section, from solid – minimum drill Ø: 4 mm Drilling section, from solid – maximum drill Ø: 25 mm WORKING CHARACTERISTICS OF THE MILLING SPINDLE: Maximum rotation speed: 6.000 rpm Maximum thread (on C40 type steel): M 20 Maximum quill excursion (Z axis): 300 mm DIMENSIONS: Overall dimensions: 3.300 x 3.600 mm Height: 2.200 mm Total weight: 6.500 kg Machine complete with: • Instruction manuals and CE declaration

Condition: good (used), -Drill through fair 5-30 mm - depth 750 ~ 900 mm - conversion to customer specification Kedpfj Dcz Djx Ag Njdu

Condition: used, URANIA DSK Maximum paper size: 80 × 112 cm Minimum paper size: 30 × 42 cm Kdsdpsw R Eqbofx Ag Nou • Frame opening (normal): 78.5 × 108.5

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 106729-11, total length: 8,880 mm, total width: 6,360 mm, total height: 4,700 mm, overall weight: 34,000 kg, The drilling method used by the deep hole drilling machine is single-lip drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 0 - 8000 rpm - Spindle drive power: 17 kW at 100% ED S1 operation / 20 kW S6 operation - Maximum drilling depth: 1800 mm / 2100 mm with pilot drilling without drill bush holder - Minimum/maximum drilling diameter: 4 - 40 mm based on ST 60 - Maximum thread cutting: M30 - Milling material removal rate: 475 cc/min Traverse Axes: - X-axis travel: 2000 mm - Y-axis travel: 1000 mm - Z-axis travel: 2200 mm Travel Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil, type HSD 400 - Total capacity: 2400 liters - 1x hinged belt chip conveyor - 1x screw conveyor - 1x hydraulic unit and pneumatic unit/equipment - 1x oil mist extraction unit - 1x central lubrication: Central lubrication unit for oil impulse lubrication - 1x submersible pump: Pump flow rate: 200 l/min Pump drive: 1.1 kW - 1x submersible pump: Pump flow rate: 500 l/min Pump drive: 2.2 kW - 1x submersible pump: Pump flow rate: 100 l/min Pump drive: 5.5 kW - 1x compact band filter: Filtering capacity: 175 l/min For machining steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Delivery rate: 2 - 120 l/min Pump drive: 11 kW - 1x water cooler: Kdjdpfxow Htire Ag Nsu Cooling capacity: 30 kW Milling and Drilling Spindle Unit: - Spindle housing with AC motor spindle - The position of the machining unit on the Y-column enables true 4-side machining at table center - Swivel axis device, swivel range: -30°/+15° 2x manual steady rests: - On guide rails with manual positioning - Can be swiveled away and manually opened and closed Drill bush holder: - Precise changeover between deep hole drilling with drill bush and conventional machining, or deep hole drilling with pilot drilling - Automatic drill bush holder change via standard tool magazine Pickup Tool Magazine: - For standard tools - 36 tool storage positions - Max. tool holder: HSK 63 / Max. permitted tool diameter: 100 mm / Max. permitted tool length: 300 mm - Tool transfer from magazine to spindle via NC-controlled spindle positioning - 1 slot for drill bush holder Clamping Table with X-Axis and NC Rotary Table: - Length/width: 1250x1250 mm - 360° rotary workpiece table - Load capacity (centered): 10 t - Workpiece swing diameter: 2000 mm Electrical Equipment Information: - 1x CNC control Sinumerik 840D SL (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3-phase 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 40 kW

Condition: good (used), Inexpensive from Swiss liquidation Ksdpfx Ajukunneg Nedu

Condition: like new (used), functionality: fully functional, Electric countertop deep fryer 2x7 L Purchase date: 2021/ KW 47 Model: E7FREH2B00 Manufacturer: Electrolux Dimensions (W x D x H): 800 x 730 x 250 mm Electrical connection: 10.8 kW Voltage: 400 V Frequency: 50/60 Hz Phase: 3N Electric fryer with 2 basins of 7 liters each, Kodpfx Ajxgpu Isg Nodu Countertop unit with 1.5 mm thick top plate made of CrNi steel 1.4301, Front, rear, and side panels made of CrNi steel 1.4301 with Scotch-Brite finish Basin size: 240x380x235 mm, external heating elements Min./max. filling capacity: 5.5/7 liters Operating temperature: 105-185°C Standard accessories: 1 basket per basin (921608) Countertop device, body height 250 mm

Condition: good (used), Year of construction: 2007, functionality: fully functional, type of input current: AC, TAULER PRINTLAM 52 Digital, year 2007, single-sided thermal laminator Max. sheet size: 550 x 740mm, Kdodpfeulgx Iex Ag Nsu Min “ “ 200 x 250mm Max speed 35m/min (4000sph) Paper stock 130 – 450 gr/sqm. Electrical specification – 380-415V, 3ph, 50Hz, 9.kW Dimensions 2.75mL x 1.25mW x 1.7mH Stream feeder Auto sheet feeder, Pneumatic pressure roller, Automatic sheet separator with drop tray delivery Touch screen controls

Condition: ready for operation (used), Drilling diameter 5 ~ 25 mm Kodedgpltjpfx Ag Nedu Drilling depth 1000 mm Headstock Tank pump Filter

Condition: excellent (used), functionality: fully functional, The 700XP Fryer with 2x 7 liter capacity is an essential component of modular cooking equipment for professional kitchens. Ideal for easy draining of the machine. Article number: KV-10099 Brand: Electrolux Model: E&FREH2BOO Type: Top Model Double Fryer Capacity: 2x 7 Liters Kdedpsw Imhiefx Ag Neu Dimensions (WxDxH): 800x930x350 mm Connection voltage: 400V Power: 10.8 kW

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 45 mm -Dimensions: see photo technical. drawing -Total dimensions: 160/140/H190 mm Ksdpjrh Ni Eofx Ag Nsdu -Total weight: 17,2 kg

Year of construction: 2021, condition: ready for operation (used), A semi-automatic vacuum skin packaging machine (tray sealer) Sealed Air for Darfresh skin packaging is available. Packaging capacity: 15/min, cycle performance: 1.5 cycles/min, film width: 562mm, max. product dimensions X/Y/Z: 670mm/470mm/50mm, tray length range: 135mm-700mm, tray width range: 120mm-520mm, tray height range: 5mm-50mm. Machine dimensions X/Y/Z: approx. 1050mm/1650mm/1250mm, weight: approx. 500kg. Documentation available. An on-site inspection is possible. Kdodpexaphbjfx Ag Neu

Condition: excellent (used), - Fryer model: IEF 224 - Serial number: J00015 - Dimensions (W x D): 600 x 610 mm - Tank dimensions: 2 x 200 x 400 mm - Capacity: 16 L (2 x 8 L) - Electronic temperature control - 2 baskets - Drain tap with valve - Power: 2 x 9 kW - Voltage: 400 V - Fryer model: AEF 224.150 - Dimensions: 600 x 700 mm - Tank dimensions: 400 x 400 mm - Capacity: 16 L - Electronic temperature control Kdsdjwyby Eepfx Ag Nju - Drain valve with tap - Power: 18 kW - Voltage: 400 V

Condition: new, Year of construction: 2025, Set of jaws for Extec C10 - Heavy Duty version with big tooth(50 mm tooth high) J692HDE, J693HDE Fixed jaw 18%Mn2%Cr - 870 kg Swing jaw 18%Mn2%Cr - 610 kg Kdedpfxjigvc Ts Ag Nou Very good quality castings Price for set EXW Poland, worldwide shipping can be arrange

Condition: good (used), Year of construction: 2006, feed length X-axis: 1,650 mm, feed length Y-axis: 1,000 mm, Max. drill Ø steel: 5 - 40mm X - Travel: 1650mm Y - Travel: 1000mm W - Travel: 500mm Table size L x W / or ø:1200 x 1500mm Spindle taper: SK40Mk Speeds / ranges: 4200Rpm Length: 6500mm Width: 3800mm Kdjdpfx Aswyup Tjg Nou Height: 3400mm Weight: 6500kg

Condition: new, Sheet metal cutting moulds Sheet metal cutting moulds Sheet metal form moulds Hot brass forging Hot steel forging Cold steel forging Cold forged aluminium & steel Deep drawing moulds Automotive and spare parts white goods Product Info: No pit required Steel construction body T-Channel home plate & ram 8 surface guide ram Adjustable precision stroke Automatic central lubrication Electronic automated counter PLC applications & screen Finger protection light barrier Compliance with CE norms Kdodpfxsfuangj Ag Neu Non-Standard table & stroke length Two-hand control Electric Control Pedal Ram inside hydraulic ejector Cylinder remover by home plate

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks Kdodephuqcopfx Ag Nju -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 45 mm -Dimensions: see photo technical. drawing -Total dimensions: 190/150/H130 mm -Total weight: 18 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth -Jaw width: 45 mm -Dimensions: see photo technical. drawing -Total dimensions: 180/150/H120 mm -Total weight: 20,2 kg Kdedjrlpp Ijpfx Ag Nju