Used Deep Hole for sale (4,511)

Condition: excellent (used), Year of construction: 2019, drilling depth: 3,000 mm, total length: 11,500 mm, total width: 4,300 mm, total height: 2,350 mm, rotational speed (max.): 1,800 rpm, spindle motor power: 44,000 W, Deep hole drilling machine Tacchi - FT 350 x 3000 MACH-ID 9650 Make: Tacchi Type: FT 350 x 3000 Control: SIEMENS 840D Year: 2019 Kodszdq Ecspfx Al Nelu High precision accuarcy ( two step proces) 1e step  cutting using skiving knives 2 step cold-form rollers for highest surface toleraces For Superfinishing Hydraulic and Pneumatic Cylinders / Rods ECOROL Boring heads in diameter: 40/50/63/80/90/100 mm Maximum out side diameter 250 mm Swing over bed 700 Center height 350 mm Drilling carriage Rapid feed rate both directions 6000 mm/Min Max. Drilling thrust 35000 N Feeder carriage Rapid movement 5000 mm/Min Thrust against workpiece 35.000 N Hydraulic approach stroke 150 mm Max. drill Ø steel:200mm Spindle bore: 85mm Drilling depth: 3000mm Power on spindle: 44kW Speeds / ranges: 1800Rpm Length: 11500mm Width: 4300mm Height: 2350mm Weight: 14450kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), 10 x Deep-hole drill bits, manufacturer Botek 3 pieces, 6.5 x 320 mm 2 pieces, 10.2 x 190 mm 3 pieces, 10.4 x 250 mm 1 piece, 11 x 350 mm Klsdpfxohl Awde Al Nsu 1 piece, 11 x 270 mm Weight: 1.5 kg

Condition: like new (used), Ryazan Model PT295106 Deep Hole Borer x 4000mm Manufacturer Ryazan Model PT295106 Year 1985 Condition Used Stock Number 2850 Centre Height 550mm Solid Boring Capacity 200mm Klodpfx Alexzp Rlj Nsu Max Boring Length 4000mm Headstock Hollow spindle 500mm Headstock Spindle speeds 16-250 rpm Headstock drive 50/75kw Max boring length in front of headstock 3500mm Max boring length if using the 500mm hollow spindle 4000mm

Condition: excellent (used), Heidenrich & Harbeck B3 SB Deep Hole Borer Kodpsw U Uhksfx Al Nslu 10,000mm Capacity, 4 off Steady Rests 2 off Boring Bar Dampers Swarf Tray & Baskets Tooling, Counter Rotation

Condition: good (used), Year of construction: 2007, functionality: fully functional, drilling depth: 1,150 mm, overall weight: 12,000 kg, drill diameter: 32 mm, Heidenhain iTNC530 cnc control 12-fold tool changer Technische Daten / technical details: Wege: / travels: X-Achse längs (Tisch) / X-axis longitudinal (table) 1800 mm Z-Achse quer (Ständer) / Z-axis cross (column) 1700 mm W-Achse quer (Bohreinheit) / W-axis cross (drilling unit) 1150 mm Y-Achse senkrecht (Bohreinheit) / Y-axis vertical (drilling unit) 1200 mm B-Achse (Rundtisch) / B-axis (rotary table) 360 ° A-Achse (Bohreinheit) / A-axis (drilling unit) -25 - +15 ° Bohrbereich-Tiefbohren (ELB): / drilling area-deep drilling (ELB): Durchmesserbereich / diameter range 6-32 mm max. mögliche Bohrtiefe / max. drilling depth 1150 mm Antriebsleistung / drive capacity 40 kW Gewicht der Maschine ca. / weight ca. 12000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. Kledpfowcldaex Al Nou For more technical details please look at the photos

Condition: good (used), Tools , drills will come without tool cabinet. Last picture, only come tolls without tool holders from up side of tool trolley. Tool trolley not come Kjdezd D N Ispfx Al Nelu

Condition: excellent (used), functionality: fully functional, Deep Hole Drilling Unit / Deep Hole Drill Manufacturer: POREBA Kedpfxezcvuuj Al Njlu Type: Deep Hole Drilling Attachment / Drilling Rig Condition: Used, good technical condition Technical Data Feed stroke: up to 900 mm Weight: approx. 780 kg Electrically driven feed system Heavy-duty industrial construction Integrated control panel Complete unit with drive motors Description Offered for sale is a robust deep hole drilling unit manufactured by POREBA. The attachment is suitable for installation on large conventional lathes or special-purpose machine tools and features an electrically driven feed system with a travel of up to 900 mm. Its rigid construction provides excellent stability and precision during deep hole drilling operations. The unit is supplied complete with drive motors, control panel, and mounting components visible in the photographs. Advantages ✔ Heavy-duty industrial design ✔ Feed travel up to 900 mm ✔ High rigidity and stability ✔ Electrically driven feed system ✔ Suitable for deep hole drilling applications ✔ Proven POREBA engineering Transport Approximate weight: 780 kg Loading assistance available

Condition: excellent (used), Year of construction: 2009, drilling depth: 350 mm, workpiece weight (max.): 1,600 kg, table load: 1,600 kg, Deep hole drilling machine Mollart - LD8 - 150 Pellet Die Number of Spindles 8 Gun Drilling Diameter Range 1.5mm-10mm (Per Spindle) Maximum Drilling Depth 150mm Drill Spindle Stroke 350mm Pellet Die Diameter 500mm-1550mm B-Axis Accuracy +/- 6 Arc Seconds Y-Axis Vertical Travel 400mm Gun Drill Speed Range 0-14,000 RPM Max. drill Ø steel 1.5 - 10 mm Drilling depth 350 mm Klsdpfx Asyilgdol Nou Table load 1600 Speeds / ranges 14000 Rpm Dimensions (Estimate) Length 4500 mm Width 4500 mm Height 2300 mm Weight 12000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Deep hole drilling machine tools DEGEN - UTB MACH-ID 9188 Kedpfx Alsx Tp Ahj Nslu Make: DEGEN Type: UTB Year: 2005

Condition: good (used), drilling depth: 1,500 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 1,500 mm, Manufacturer: TBT deep drilling technology Type: BW 250-S Control: SIEMENS 840D Year of manufacture: 2007 Drilling, Milling, Tapping for heat exchanger bases and plates Swivable A Axis + 25 to - 15 Degrees Filtration and Coolant system 1000 L Cip conveyor 2000 x 1200 height out put Milling tool changer Tower Station 20 positions Capacity ELB Drilling 3 - 35 mm Capacity Milling 250 ccm/Min Feed rates all axis 15,000 mm/Min X-Y-W-Z Cutting hours approx. 15,000 Large tooling package Specifications Metric US Standard Max. Drill Ø steel 40 mm Drilling depth 1500 mm X - axis 2000 mm Y - Axis 1300 mm Z-axis 1500 mm W-axis 750 mm Table load 15000 Table dimensions / L x W or ø 1600 x 1200 mm Spindle mount HSK 63 Mk Spindle power Kjdpfxjv A Uw Do Al Nolu 11 kW Speed 8000 Rpm Dimensions (estimate) Length 7200 mm Width 7800 mm Height 4250 mm Weight 23000 kg Please note: The information on this page is believed to be accurate and is provided by us and, where possible, from the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation or contractual terms. We recommend that you check all important details.

Condition: excellent (used), Year of construction: 2018, drilling depth: 1,250 mm, total length: 8,100 mm, total width: 6,300 mm, total height: 4,300 mm, workpiece weight (max.): 7,000 kg, overall weight: 31,000 kg, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 6,000 rpm, drill diameter: 36 mm, 4 side complete machining Swivel drilling and milling unit DCM Dynamic Collison Monitoring CAM model Kljdpovn Sv Usfx Al Nsu QCK (Quick Check Kinematics) Transfer bore cycle (380-382) 90 Bar IKZ Coolant system Extra ATC Tower 24 position (4 x 6) HSK 63 Double ballscrew construction Clear tank 1650 L and Waste tank 1300 L Chip conveyor Max. drill Ø steel: 36mm Drilling depth: 1250mm X - Travel: 1600mm Y - Travel: 1250mm Z - Travel: 1100mm W - Travel: 1600mm Table load: 7000 Table size L x W / or ø:1500 x 1100mm Spindle taper: HSK-63Mk Power on spindle: 23kW Speeds/ranges: 6000rpm Length: 8100mm Width: 6300mm Height: 4300mm Weight: 31000kg

Condition: good (used), Year of construction: 2006, feed length X-axis: 1,650 mm, feed length Y-axis: 1,000 mm, Max. drill Ø steel: 5 - 40mm X - Travel: 1650mm Y - Travel: 1000mm W - Travel: 500mm Table size L x W / or ø:1200 x 1500mm Spindle taper: SK40Mk Speeds / ranges: 4200Rpm Kedpfswyup Tox Al Njlu Length: 6500mm Width: 3800mm Height: 3400mm Weight: 6500kg

Year of construction: 2013, condition: used, controller manufacturer: Siemens, controller model: 840Dsl, _____ Kjdpfsx E Ingjx Al Njlu Description: Year of manuf. : 2013 In general: Drilling-ø (max.):3,5 mm Drilling depth (max.):200 mm Deep drilling module: Technology:Drillingspindle Speed (max.):10.000 rpm Power:3,5 kW Taper:HSK-A40 Equipment/Accessory: Chipmanagement:Chip tray Coolingmanagement:Internal cooling unit with Filter and High-pressure, 140 bar Workpiececlamping:Collet chuck, SMW Autoblok KSZ-MB-040-Z140 Oilmistseparation:Electrostatic extraction, LTA AC 500 Further Accessory:Misc. Single lip driller

Condition: excellent (used), drilling depth: 10,000 mm, MGA (Romanian) Deep Hole Boring Machine Max Boring Dia: 187mm Max Boring Length: 10,000mm Chuck Diameter: 813mm Chuck Bore: 152mm Kljdoyk Tcfepfx Al Nou Machine had a complete retrofit in 2007 to enable CNC or manual mode operation Controls: Bosh Rexroth Electric Drives Software Winstudio At the moment the machine is set to bore 3000mm length Has 5 other bed sections to increase this 12 Various Boring Tubes 30 Various Boring Heads 5 Supporting Steadies 2 Pressure Heads

Year of construction: 2007, condition: excellent (used), functionality: fully functional, IMSA DEEP HOLE DRILLING MACHINE MODEL MF 1000 BB TRAVELS: LONGITUDINAL AXIS: 1250 mm CROSS AXIS (MILLING QUILL): 380 mm CROSS TRAVEL OF HEAD: 500 mm VERTICAL TRAVEL: 1000 mm Kljdpfoyft Hajx Al Nju ROTARY TABLE SIZE: 1000x800 mm TOTAL MACHINE WEIGHT: 20,000 kg

Year of construction: 2006, condition: used, CNC SELCA 4045 Kodpfx Alsq Nni Se Nelu 1200 X 1500 MM TURNTABLE TABLE X AXIS TRAVEL 2200 MM Y AXIS TRAVEL (VERTICAL) 1000 MM V AXIS TRAVEL (DRILLING) 1000 MM Z AXIS TRAVEL (MILLING) 360 MM W AXIS TRAVEL (APPROACH) 500 MM B AXIS ROTATION ( TABLE ) 360,000 MAXIMUM DRILLING CAPACITY 5. 40 MM MAXIMUM TAPPING CAPACITY M 30 MILLING TOOL TAPER : ISO 40 AXIS FEEDS X Y V W 0 - 10000 MM/MIN DRILLING AND MILLING SPINDLE MOTOR POWER 9 KW WEIGHT 26000 KG DRILLING ROTATION 4200 RPM MILLING ROTATION 4500 RPM WORKPIECE WEIGHT IN ROTATION 12000 KG WEIGHT OF STATIONARY WORKPIECE 18000 KG MAXIMUM DIAMETER OF THE ROTATING PART DIA. 2700MM TOOL CHANGER FOR MILLING TOOLS 20 PLACES PAPER FILTRATION SYSTEM

Condition: not inspected (used), Year of construction: 1970, - Drilling diameter: 5-30 mm Kjdpexzz Hofx Al Nelu - Drilling depth: 750 mm - Filter - Pump

Condition: excellent (used), Drilling capacity -16mm Klodsq Dlznspfx Al Nou MK2 Spindle taper Drilling depth max. 485mm table 590 x 350 mm, 360° turnable Misc. Accessories Marcels Maschinen AG

Condition: good (used), Year of construction: 1997, TBT ML 200-2-850 deep hole drilling machine TECHNICAL DATA Type: M200-2-850 Number of spindles: 2 Drill carriage stroke: 850 mm Drilling method: Single-lip drilling Drilling depth with: Submersible spindle: 120 mm Sealing housing: 400 mm Sealing housing with bezel: 350 mm Spindle drive Power: 2 / 3.5 / 1.5 kW Voltage: 140 / 350 / 350 V Speed: 14 / 11 / 6 / A Feed - own drive Kjdevca Rcspfx Al Njlu Feed speed: 20 - 500 mm/min Rapid traverse speed NC operation: 12 m/min Feed force: 1.5 kN Motor power: 2.2 Nm at 3000 rpm Clamping tailstock Motor power: 0.75 kW at 1000 rpm Spindle speed: 500 rpm Stroke max: 200 mm Main dimensions L x W x H: 4600 x 2500 x 2100 mm Transport weight: 3200 kg Control: Sinumerik 805 M No liability is assumed for the correctness, completeness and up-to-dateness of the information provided

Year of construction: 1980, condition: ready for operation (used), A Gebrüder Irle CNC large-format deep-hole drilling machine is available. Drilling capacity steel: 40mm, max. drilling depth: 1600mm, drill spindle adjustment: 350mm, vertical drilling unit adjustment: 700mm, power: 30kW, speed: 2940rpm, field range constant power: 1-3, armature range constant torque: 1-35, max. drill spindle torque: 1500Nm, rated speed: 163rpm, spindle flange diameter: 200mm, quill diameter: 2000mm. Feed: 500mm/min, rapid traverse: 1200mm/min, max. feed force: approx. 34.3kN, display: 0.005mm, vertical adjustment travel: 700mm, longitudinal adjustment travel: 13000mm, transverse adjustment travel: 650mm, swivel: 85°. Clamping plate dimensions X/Y/Z: 12500mm/1000mm, guide bed dimensions X/Y: 3350mm/455mm, controls: Heidenhain TNC 310. Documentation available. An on-site inspection is possible. Ksdpfx Aey Rtfzol Nslu

Condition: like new (used), The deep hole drilling machine have 6 spindles and is in very good condition, LIKE NEW! Klsdpfeb Naclex Al Neu This can be like to inspect under pressure. On request we can send you more pictures. Number drill spindle 6 ELB and BTA drilling Min. drilling diameter 3 mm Max. drilling diameter 20 mm Max. drilling depth 1000 mm We see ourselves as a competent partner for downhole drilling, turning, milling and welding in paid labor. We will gladly make you an offer!

Condition: refurbished (used), 2-spindle deep hole drilling machine under retrofit, completely overhauled, like new after conversion. Technical Data Drilling system: ELB system Klsdex E U S Ejpfx Al Nju Number of drilling spindles: 2 Min. drilling diameter: 1 mm Max. drilling diameter: 8 mm Max. drilling depth: 300 mm Nominal workpiece diameter range: 5–30 mm

Year of construction: 2018, condition: as good as new (ex-display), Number of spindles: 1 Full-bore diameter: 5-40 mm Drilling depth: 1,000 mm Kledpfx Asd S Ualsl Neu

Condition: excellent (used), Year of construction: 2007, • Maximum possible drilling depth: 1200 mm • Maximum hole diameter: 32 mm • Minimum drilling diameter: 6 mm • Longitudinal travel (X-axis) table: 1800 mm • Cross travel (Z-axis) column: 1700 mm • Cross travel (W-axis) drilling head: 1150 mm • Vertical travel (Y-axis) drilling head: 1200 mm • Clamping surface NC table: 1500 x 1000 mm • Maximum table load: 10 t • Rotary axis (B-axis) rotary table: 360° Kjdpfjxyf E Nox Al Njlu • Rotary axis (A-axis) drilling head: -25°/+15° • Feed rate: 1-15 m/min (Y-axis: 1-10 m/min) • Rapid traverse speed in all axes: 15 m/min (Y-axis: 10 m/min) • Maximum spindle speed: 6000 rpm • Minimum spindle speed: 60 rpm • Tool holder: SK 40 • Tool clamping: OTT • Rated power main drive (100% ED, S1/40% ED, S6): 9/13 kW • Coolant tank capacity: 1000 l • Maximum coolant pressure: 100 bar • Low-pressure external and high-pressure internal coolant supply • Power supply: 3x 400 V; 50 Hz • Required installation space (L x W x H): 6550 x 5350 x 4130 mm • Machine weight: 12,000 kg Deep Hole Drilling Machine Equipment • CNC control: HEIDENHAIN iTNC 530 • Interpolated rotary table with minimal backlash, dimensions 1500 x 1000 mm • Swiveling drilling head +15°/-25° • Shank drilling head • Handwheel HR520 • Fixed supports (2 units) • Tool magazine: ELB tools: 12 pcs (max. diameter: 32 mm / max. length: 1550 mm) Standard tools: 12 pcs (max. diameter: 140 mm / max. length: 400 mm) • Direct measurement and positioning system in X, Y, and Z axes • Collision monitoring system for supports and drill sleeves • Oil cooler • Coolant flow control system • Adjustable coolant nozzles • Cooling unit for electrical cabinet • Enclosed upper cover (roof) • Drip tray for machine and tank facility (tray height 30 mm) • Extraction system • Infrared touch probe • Drilling depth extension 1200 mm (retrofit) • Chip conveyor

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 308-600-1716, drilling depth: 600 mm, spindle speed (min.): 1,423 rpm, drill diameter: 65 mm, center height: 299 mm, TECHNICAL DETAILS Boring Unit Boring system: BTA + Ejector Speed steps: 8 or 16 with gear change Feed range: 0 – 500 mm/min Rapid traverse forwards/backwards: 5,000 mm/min Spindle taper: DIN 55022, size 6 Main Drive Three-phase motor: 37 kW, 1,500 rpm Frequency control: available Spindle Speeds Range I: 16/180 – 200/230 – 290/330 – 370/430 rpm Range II: 550/620 – 740/800 – 990/1,120 – 1,280/1,450 rpm Feed Drive Servo motor: 10 Nm, 3,000 rpm Ball screw: MH 50 × 10 × 14 Coolant System Total power requirement: 73 kW Coolant pump: MSDA 40-R38, SMDA 80-R46 Magnetic filter candles: MFK 400 R Liquid cooler: DKL 7 Gap tube filter: 54 572 71 104 Immersion pump: TB 405/390 Centrifuge: Polar U6 MACHINE DETAILS Dimensions and Weight Machine weight: approx. 6,000 kg Paintwork Color: RAL 6011 EQUIPMENT Clamping fixture with movable drill bushing Clamping fixture with drill bushing carrier Clamping fixture with clamping table Clamping fixture with centering tailstock Clamping fixture with centering clamp ZS2 (HICO) Force measuring system KIMISIT 0 – 30 Hydraulic unit HS04-C807-6-0 Chip conveyor SEW RF 430T71D4 Centrifuge Hanning ZG 52x6K.137 Fans Dietz DR 80a 69 Lubrication pump Vogel DM7 Control unit for main and feed drives Klodpfxewx E N Ie Al Nju