Used Defective Winding Machine for sale (65,133)

Year of construction: 1999, condition: ready for operation (used), A Sahm parallel winder is available. Spindle positions/winding positions: 104, traverse length: approx. 300mm, bobbin core holder: approx. 50mm. On-site inspection is possible. Fjdpfswhp Nqsx Aa Ejpd

Condition: ready for operation (used), Year of construction: 2016, A complete SML winder including core magazine is available. Infeed part roll width: 2600mm, max. film end width: 2350mm, winding shafts: 6/3 inch, max. mechanical speed: 250m/min, max. roll diameter: 980mm, film thickness range: 15µm-2500µm, core diameter: 3 inch, core type: cardboard/plastic, roll change time: 4min, deposit capacity 2nd table: 15 rolls, power requirement: 52kW, edge trimming: In-Line, Knife type: free cut with razor blade, Winder mode: gap/contact, Roll delivery: 3-axis robot. Including non-stick rollers, linear guide, scale, robot and core magazine. Documentation available. On-site inspection is possible. Fedpfsvripyox Aa Espd

Year of construction: 1993, condition: ready for operation (used), Number of spooling positions: 2x 6, number of take-off pulley drives: 1 group drive, number of layings: 1 group laying, wire diameter: 0.15-0.3mm, bore diameter 22mm, winding speed: 20-120/min, max. winding strength: 78.5MPA, connected load: 4.5kW, material: stainless steel and brass, spool range: K160 to K250 acc. to DIN 46399, with group drive of take-off pulleys for all spooling positions and group laying for all spooling positions for conventional flanged spools. Fjdpfon I T Tgsx Aa Eepd

Condition: good (used), Year of construction: 1981, wire diameter range: 1,0 - 5,0 mm Fpodpeb Hqz Uefx Aa Ejd ring diameter range: 100 - 600 mm wire feeding length: max. 2.000 mm output: 10 - 120 pcs./min.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2025, warranty duration: 24 months, input voltage: 400 V, total width: 966 mm, total height: 714 mm, DGUV certified until: 12/2027, conveyor belt width: 750 mm, input frequency: 50 Hz, Equipment: chassis, Baguette - long roller Model: Forma with 3 rollers Capacity: min 50 - 1200 g max (depending on the type of dough) Unrolling width: up to max. 750 mm stainless steel design, Connection: 400V, 1.1 kW, 16A-CEE plug Dimensions: 966 x 855 x 714 mm, WxDxH NEW machine Fpsdpfx Ajhwzkkoa Esd with 24 months warranty Option: base speed controller infeed conveyor discharge tours Discharge belt with drive feed guides Visit our large bakery machine park!

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: PET09622A, Automatic winding and packaging machine for flexible spiral hoses, pipes, corrugated hoses, and hoses with an outer diameter of 8 mm to 40 mm. After winding, the coil is wrapped with stretch film and, if necessary, automatically labeled by the label printer. The total of six loading units are loaded with hose sections and wound up one after the other. The package includes a wide range of spare parts. These include: Omron servo axle drives, trailing cables for drives and valve terminals, various pneumatic components, drive belts, sensors, etc. Capacity: 60 coils/hour Min. inner diameter of coil: 200 mm Max. inner diameter of coil: 380 mm Max. outer diameter of coil: 850 mm Min. width of coil: 120 mm Max. width of coil: 340 mm Fedswd Emwopfx Aa Eopd The technical data sheet can be found below the images; the operating instructions are attached.

Year of construction: 2003, condition: good (used), - Fully automatic - For packing bar shaped products - Product height (mm): 19 - 600 - Product width (mm): 600 - 2100 - Product length (mm): 2400 - 5700 - Product weight (kg): 3000 - max. cross-section diagonal (mm): 2184 - Brake motor for winding ring drive: controlled by frequency converter - 2 driven roller conveyors: each 3000 mm long for the infeed side of the machine, equipped with brake motor Fodpfx Aohyxfvoa Eepd - 2 driven roller conveyors: for the outfeed side of the machine (1 piece 3000 mm long, 1 piece 4400 mm long) executed with brake motor - 1 packing material take-up: for stretch film, crepe paper, PE film etc. - packing material roll width max. (mm): 500 - Automatic gripping, cutting and feeding device: for PE stretch film, in smooth cut version - Electrical device for laying edge protection beads at the beginning and end of the product to be wrapped: preselectable by means of a timer - Electric power pre-stretch system: for PE stretch film with thickness 17 - 50 my - Machine length (mm): approx. 2000 - Machine width (mm): approx. 3400 /3800 - Machine height (mm): approx. 2200 above floor level

Condition: new, Plastic film wrapping packing machine Adjustable rotation speed. Fjdpfxjd A Udnj Aa Ejpd Table diameter depending on the customer request. Manual or automatic processing. Various recordings and accessories for different task areas.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Fully automatic stretch wrapping machine Spinny S2300 with electromechanical top press Pallet dimensions: L 1200 x W 800 x H 2600 mm Maximum weight: 1000 kg Hourly rate: approx. 20 pallets/hour (depending on pallet height and wrapping pattern) Conveyor height: 500 mm Technical specifications: • Wrapping cycle programmable via electronic control panel and SIEMENS S7-1200, KTP700 operator panel • Control system: SIEMENS PLC S7-1200 SAFE and HMI KTP700 • 15 freely programmable wrapping programs • Turntable stop at end position • Conveyor height: 500 mm • Usable width of roller conveyor: 1000 mm • Photoelectric cell for automatic pallet height detection • Clamp for attaching film to the pallet load • Automatic film cutting system at the end of the wrapping cycle • Frequency inverter for adjusting turntable speed from 5 to 15 rpm • Frequency inverter for adjusting film carriage speed • Powerstretch 250% • Film welding with hot pad counter-blade • Standard colors: Grey RAL 7001 for fixed parts, Grey RAL 7016 for moving parts and plastic covers • Volt-free contacts • 1 frequency inverter for controlling conveyor at turntable POWER SUPPLY > Power supply: 400 V, 50 Hz, 3-phase + PE > Frequency: 50 Hz > Installed power: 3 kW > Auxiliary power supply: 24 V DC > Compressed air: 6 bar FILM AND ROLL CHARACTERISTICS > Thickness: 12 ÷ 23 µm > Recommended thickness: 20 µm > Core diameter: 76 mm Fpsdpfjwxrh Dox Aa Esd > Height: 500 mm > Maximum roll weight: 16 kg > Maximum outer roll diameter: 250 mm Powered roller conveyor for outfeed, with double sprockets, frequency controlled Length: 1470 mm Usable width: 1000 mm Height: 500 mm Roller diameter: 89 mm Pitch: 158.75 mm 2 pcs. SICK M40 UE403 PSD01 1047810 Safety light curtains, safety category 4, safety fences, height: 2200 mm with access door, dual-channel safety magnetic sensor integrated in safety control

Condition: used, Year of construction: 1994, Wrapping Machine Böhl Type Meister/S-600 Technical Specifications: Fjdpfxjxhtl Ts Aa Ejpd • Fully automatic, horizontal wrapping machine • Product height (mm): approx. 10 - 300 • Product width (mm): approx. 10 - 600 • Product length: unlimited • Maximum cross-sectional diagonal (mm): approx. 600 • Packaging materials: PE stretch film, VCI stretch film, PE film, crepe paper, etc. • Packaging material width (mm): up to 125 • Packaging core diameter (mm): 76 • Automatic cutting and clamping device for packaging material • Automatic motorized product transport • Electrically adjustable wrapping unit height • Infinitely adjustable film tension/pre-stretch • Quick-change device for packaging material rolls • Adjustable conveyor speed via frequency inverter • Pneumatic pressure roller in the machine's discharge area • PLC controlled

Condition: used, WIDMANN automatic film unwinder, film unwinder Rewinder and unwinder, unwinder, rewinder, winding machine, roll winding machine, roll unwinding machine Unwinder with deflection rollers and film guide system Unwinder with deflection rollers for constant strap tension Year of construction approx. 2000 Roll width - coil width max. 400 mm Material width max. 400 mm Deflection rollers Ø 80 mm Deflection roller width 430 mm Roll weight - coil weight max. 150 kg Expansion shaft for cardboard core with inner diameter Ø 76 mm (inner coil diameter) Roll outer diameter - coil outer diameter max. 600 mm Interference circle with rotation of the film reel max. Ø 800 mm Reel shaft speed approx. 70 rpm Motor power - drive of the film reel 0.37 kW Mains connection 400 Volt, 50 Hz - Constant belt tension, winding tension via film accumulator with deflection rollers and vacuum shaft - Pick-up shaft with chuck for large rolls with cardboard core inner Ø 76 mm - 8 deflection rollers for film accumulator with constant winding tension, bearing via precise linear guide - Gear motor LENZE with brake to drive the film roll (0.37 kW) - Electrical system not ready for operation, see pictures Space requirement L x W x H approx. 1000 x 1000 x 1900 mm net weight 360 kg Fjdpfx Aajud U Sfs Espd good condition

Condition: used, WIDMANN automatic film unwinder, film unwinder Rewinder and unwinder, unwinder, rewinder, winding machine, roll winding machine, roll unwinding machine Unwinder with deflection rollers and film guide system Unwinder with deflection rollers for constant strap tension Year of construction approx. 2000 Roll width - coil width max. 400 mm Material width max. 400 mm Deflection rollers Ø 80 mm Deflection roller width 430 mm Roll weight - coil weight max. 150 kg Expansion shaft for cardboard core with inner diameter Ø 76 mm (inner coil diameter) Roll outer diameter - coil outer diameter max. 600 mm Interference circle with rotation of the film reel max. Ø 800 mm Reel shaft speed approx. 70 rpm Motor power - drive of the film roll 0.37 kW Fpedpfx Aaju H R Iqo Eed Motor power - drive of the flat film into the vacuum shaft 0.25 kW Mains connection 400 Volt, 50 Hz - Constant belt tension, winding tension via film accumulator with deflection rollers and vacuum shaft - Pick-up shaft with chuck for large rolls with cardboard core inner Ø 76 mm - 8 deflection rollers for film accumulator with constant winding tension, bearing via precise linear guide - LENZE geared motor with brake to drive the film roll (0.37 kW) - LENZE geared motor with brake to drive the flat film into the vacuum shaft (0.25 kW) Space requirement L x W x H 1900 x 1300 x 1900 mm net weight 580 kg Good condition

Year of construction: 2014, condition: used, Technical data: Material: PET aluminium-metallized film Material thickness: 9–50 μm Web width: 500–2000 mm Roll width: 2100 mm Web diameter (unwind): max. φ1150 mm Web weight (unwind): max. 1500 kg Product winding diameter: • φ600 mm (3” friction shaft) • φ750 mm (6” air shaft) Winding shaft load: max. 500 kg/shaft (center-supported) Core dimensions: • Web core: 3” (φ76.2–76.5 mm), 6” (φ152.4–153 mm) • Product core width: 100–1050 mm Slit width: 200–1950 mm (up to 5 slits) Machine speed: max. 400 m/min Typical operating speed: 200–250 m/min Unwinding tension: • 50–500 N (φ650 mm or less) • max. 270 N (φ1000 mm) Winding tension: • φ200 mm: 50–300 N/m • φ400 mm: 50–170 N/m • φ700 mm: 50–100 N/m Mechanical specifications: 1. Unwinding Section • Shaftless single-axis fixed unwind • Direction: upward or downward • Automatic tension control with feedback sensor • Dancer roller included • Core clamping: rotary mechanical chuck • Core sizes: 3” standard, 6” with adapter • Web guide: manual ±5 mm, automatic ±100 mm 2. Main Drive Rollers • Multiple rollers with specified diameters and surface finishes • Nip and contact rollers with pneumatic pressure adjustment 3. Slitting Mechanism • Upper/lower NC shear cutters • Number of blade units: 6 upper + 6 lower • Slit width adjustment via touch panel • Precision: ±0.1–0.2 mm • Dust extraction: upper blade nozzles + lower blade suction • Optional razor cutter (manual adjustment) 4. Mini Winder Location: below slitter Units: 2 (left / right) Drive: AC servo motor Tension: dancer roller control Traverse width: 300 mm Winding diameter: φ500 mm 5. Winding Section • Duplex center drive • 3” air friction shaft + 6” air shaft • Automatic tension control linked to winding diameter Fodsx Ez Umopfx Aa Eepd • Contact roller with pressure adjustment • Core positioning via collar bar 6. Product Discharge • Hydraulic lift tray • Motorized slide-out with tilting function Electrical & control: Line drive motor: 7.5 kW AC servo Winding drive motor: 11 kW AC induction Unwinding drive motor: 11 kW AC servo Static eliminators: 5 units (Keyence SJ-HA) Control panels: main panel, winding panel, unwinding panel, mini winder panel, auxiliary panel PLC: Fuji Electric Utilities, dimensions & environment: Power supply: AC 200 V, 60 Hz, 3-phase Power consumption: 70 kVA Air supply: 0.5 MPa, 500 L/min (dry air) Machine weight: approx. 12 tons Paint color: urethane coating (E-31872) Installation environment: cleanroom Class 10,000 Required floor load capacity: ≥ 2 ton/m² Documentation: 2 operating manuals Spare parts: • Drive belts (4 types for line drive) • Winding drive belt (1 type) • Unwinding drive belt (1 type) • Standard tool set

Condition: ready for operation (used), Year of construction: 1972, functionality: fully functional, spring diameter: 200 mm, wire diameter (max.): 12 mm, Spring winder with a large accessory package! TECHNICAL DETAILS Wire diameter: 2.0 - 12 mm Round steel wire gauge: Ø 5.0 - 14.0 mm Square steel wire gauge: 5.0 - 12.5 mm Feed length: 17,400 mm Wire feed speed F1: 40 m/min Wire feed speed F2: 28 m/min Wire feed speed F3: 20 m/min Fpodewlp Eaepfx Aa Ejd Springs Spring diameter: Ø 25 - 200 mm Outside diameter (current setting): 34 mm Length (current setting): 135 mm Output range (output): 1 - 70 pieces/min End product options: Right- and left-handed tension/compression springs Current end product: Tension spring, wire Ø 4 mm Control Control system: Process Controller BRANKAMP MACHINE DETAILS Machine weight: approx. 10.5 t Machine dimensions (L × W × H): 2,600 × 1,800 × 2,700 mm Lubrication system (L × W × H): 600 × 400 × 800 mm Control cabinet (L × W × H): 500 × 1,200 × 2,100 mm Reel (L × W × H): 2,600 × 1,800 × 2,700 mm Total power requirement: 18.5 kW EQUIPMENT - 6 feed rolls for wire intake Ø 4 mm - Lubrication system - Wire reel reel - Control cabinet cooler - Reel - Control panel with BRANKAMP Process Controller - Accessories and spare parts: approx. 105 wire reels + approx. 13 wire guides - New purchase value approx. €100,000

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Precision winding machine for films and web materials. Designed for consistent unwinding, guiding, and rewinding of roll materials. Integrated safety system with protective glazing, laser start position indicator (green), emergency stop switches, and pneumatic film guiding. Machine frame made of steel, electrically controlled drive. Ideal for production lines in coating or laminating technology. Fedpjxzuiysfx Aa Eepd

Year of construction: 1994, condition: excellent (used), Description:-table diameter 1400 mm -Table load of Max 3000 kg -Belt width of 150 mm -Speed max. 25m / min -Belt thickness max. 1.2 mm Very compact and easy-to-use palette Unwinder diameter of turntable 1400 mm of more robust machine body with high capacity speed control of cam universally suitable for Multicoil Fpjdpsd Iw U Uefx Aa Eod

Condition: like new (used), Year of construction: 2016, Max. winding width 2350mm Clear width 2600mm Winding shafts 6”/ 3” Max. mechanical speed 250 m/min Max. mechanical diameter 980 mm Material thickness range 15 – 200 µm Fpsdswfrdrjpfx Aa Eed Edge trimming In-Line with razor blade Spreader rollers Partially driven Additional components Non-stick rollers Winding mode Gap and contact Tension control Multiple points driven/tension-regulated Dancer roll roller made of CFRP Satellite roll Adjustable angle Roll change Fully automatic on storage table for diameters up to 980mm Output of finished rolls Via robot ( 3-axis robot) Core Magazine Overview Core Magazin Automatic loading of the empty winding shaft Kind of cores Cardboard / Plastic Core diameter 3“ Storage table Second storage table for 15 rolls of 200mm diameter available Cycle time roll change Max 4 minutes Safety Safety fense , Indoor Scanner

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 04006, For sale is a stretch wrapping machine with a conveyor belt and scale. The machine was in the shipping department. Several programs can be started directly on the machine or via a cable switch (operated from the forklift). Process: Fpjdpfjwl Hp Nox Aa Ejd The package is placed on the roller table of the machine by a forklift. The machine starts at the push of a button, is wrapped automatically, the film is separated, the package moves along a roller conveyor to the unloading station, and is weighed. The package is unloaded from the unloading station by a forklift. All information is provided without guarantee. Sale to commercial customers only. Viewing by appointment in 94424 Arnstorf (Germany). Pickup in 94424 Arnstorf (Germany).

Condition: good (used), Year of construction: 2011, Unit for unwinding and feeding pre-products Year 2011 Fodev Sddfspfx Aa Eepd

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Fully automatic machine with pneumatic control and PLC system for the production of small diameter rolls Specification: Wrapping material: parchment, cooking paper Paper thickness: 10 - 70 g/m2 Speed: 500 rolls of 15 m / hour Working width: 200 mm - 420 mm Main roll of maximum diameter: 1000 mm Fpodpfx Aov Dutusa Eod The maximum diameter of the finished roll: 60 mm Electrical connection: 400 V, 50 Hz Power consumption: 6 kVA Air consumption: 200-400 l/min at 6 bar Weight: 1200 kg

Condition: excellent (used), Year of construction: 1986, Window patch machine Heiber & Schroeder Year 1986 Model WP1 Fedpfxewb Dqpo Aa Eopd

Condition: good (used), Code: 0321 Brand: SCM Model: MULTIFLEX C Automatic working center for window frames for tenoning, profiling and contouring - Max workpiece thickness mm 140 Technical data Automatic carriage with chipbreaker Max working length 2800 mm Min/max workpiece thickness 30/140 mm End cutting saw diameter 400 mm - Motor Hp 4 Tenoning spindle useful length mm 320 - Motor Hp 10 Spindle diameter mm 50 Max tool diameter mm 350 Profiling spindles: 1° Anti-splinter profiling spindle length 320 mm - Motor Hp 7,5 - Tool diameter mm 220 2° profiling spindle length mm 320 - Motor Hp 7,5 - Tool diameter mm 220 Min and max diameter of profiling spindles tools mm 100/220 Profiling spindles diameter 50 mm Tool group Zuani Variable speed feed Glazing bead recovery group - Motor Hp 3 - Diameter of suction mouth mm 50 Overall dimensions mm 2400 x 3300 x 2000 h Fjdsytn U Iepfx Aa Ejpd Weight kg 2200

Condition: ready for operation (used), Year of construction: 1988, Window manufacturing machine Manufacturer: Okoma Model: UF1 S Year of manufacture: 1988 Fedpfx Aoyk Haqea Espd with tool

Condition: used, Year of construction: 2025, operating hours: 200 h, functionality: fully functional, machine/vehicle number: 4 kopslasmachine Schtec, Equipment: 4 in one shovel, Schtec Four-Head Welding and CNC Corner Cleaning Line for uPVC Windows Fjdpfjykkw Tsx Aa Ejpd For sale: Professional four-head welding machine with CNC corner cleaning unit from the brand Schtec, suitable for the manufacturing of uPVC windows and doors. This complete line is configured for serial production and is fully adjusted for the Dutch market to work with Deceuninck profile systems. As a result, the machine can be deployed immediately in Dutch window production without any additional modification. Specifications and Features: - Four-head welding machine – simultaneous welding of all four corners - CNC-controlled corner cleaning unit – clean, precise finishing - High dimensional accuracy and consistent weld quality - Suitable for various window and door sizes - Industrial design for continuous operation - User-friendly control system - Calibrated for Deceuninck profiles (Dutch market) This machine is ideal for companies looking to increase their production capacity or to upgrade and professionalize their current production line. The combination of four-head welding and automatic CNC cleaning delivers high output with minimal post-processing required.

Condition: excellent (used), Catalog number 7382 TECHNICAL DATA Tenoning carriage: - Electric feed with stepless speed adjustment - Carriage adjustable at an angle - Feed motor: 0.46 kW - Table size (L/W): 700x450mm, extendable to 1150mm - Cross fence on carriage – cutting length on extendable telescope: 1860mm - Rotary block in the fence - 2 pneumatic clamps Crosscut saw: - Max blade diameter: 380mm - Max cutting height: 110mm - Blade adjustable up/down, forward/backward, and at an angle - Blade guard - Saw motor: 2.2 kW Tenoning spindle: - Pneumatic spindle stroke - Spindle up/down and stroke adjustment via handwheels - Max tool diameter: 320mm - Spindle diameter: 40mm - Working spindle height: 220mm - Spindle lock - Motor: 7.5 kW Profiling spindle: - Pneumatic spindle stroke - Spindle up/down and stroke adjustment via handwheels - Max tool diameter: 200mm - Working spindle height: 220mm Fpjdpfsymm Nqjx Aa Ejd - Spindle diameter: 54mm - Spindle lock - Extendable table support - Motor: 7.5 kW Glazing bead saw: - Max blade diameter: 200mm - Blade bore: 30mm - Blade adjustable forward/backward, up/down - Blade guard - Motor: 2.2 kW Feed unit: - Number of rollers: 8 pcs - Motor approx. 0.55 kW - Roller size: 110x50mm - 8 feed speeds: 4, 6, 8, 10, 12, 15, 20, 30 m/min - Extraction port diameters: 60mm, 2x130mm, 110mm, 100mm - Operating pressure: 6-8 bar - Dimensions (L/W/H): 3600x2100x1600mm, weight approx. 2500kg FEATURES – For window production – Pneumatic spindle stroke – Carriage with electric feed – Crosscut saw – Tenoning spindle – Not repainted, used machine, in very good condition Net price: 27,900 PLN Net price: 6,640 EUR (based on the exchange rate of 4.2 PLN/EUR) (Prices may change with significant currency fluctuations)