Used Daewoo 225 Lcv for sale (65)

Condition: excellent (used), Year of construction: 2006, Doosan Puma 700L Turning Centre with Fanuc Series 21i-TB CNC Control, 600mm Diameter Powered 3 Jaw Chuck, 3000mm Between Centres, Swing 1030 mm Turning dia 900 mm Nedpfx Aney Akdlefjwf Fixed steady included Chip conveyor Spindle motor 45 kw Power requirements 62.2 kva Dims 7.1 x 2.2 x 2.2 m 10 Position Tool Turret, Tailstock, Machine Weight 21500kg. S/No. P60L0377 (2006) Machine is in excellent used condition Videos can be sent on request

Condition: like new (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1435, turning length: 648 mm, turning diameter: 420 mm, spindle bore: 76 mm, spindle speed (min.): 45 rpm, travel distance X-axis: 242 mm, travel distance Z-axis: 680 mm, rapid traverse X-axis: 20 m/min, rotational speed (max.): 4,500 rpm, feed rate Z-axis: 24 m/min, overall weight: 4,100 kg, center height: 240 mm, Equipment: rotational speed infinitely variable, SOLD Machine is sold Njdpfoywkwhex Anfewf Very nice PUMA 240MSB With subspindle and driven tools And chip conveyor. Very few operating hours. 8000 hours power on Subspindle max 6000 RPM Control: 18ITS with Manual Guide Bar Feeder LNS

Condition: used, Year of construction: 2000, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Daewoo Lathe Nwodpfx Anoy Dctuofef

Condition: used, Year of construction: 1999, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Daewoo Lathe Model Puma 2500 CNC Fanuc Njdsy Dcq Hspfx Anfjwf Year: 1998

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, turning length: 1,330 mm, turning diameter: 393 mm, spindle bore: 90 mm, spindle speed (max.): 3,500 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 242 mm, travel distance Z-axis: 680 mm, quill stroke: 80 mm, turning diameter over top slide: 400 mm, spindle nose: A2-8, Doosan Puma CT250 CNC Lathe Model: CT250 Nwedpoyli R Usfx Anfsf Year: 2003 Control: FANUC 21It ‘X’ axis Travel: 240mm ‘Z’ axis Travel: 680mm Chuck Dia: 10” (250mm) Swing over Bed: 570mm Swing over Saddle: 400mm Max. Turning Saddle: 255mm dia. Distance Between Centres: 700mm Spindle Speeds: 35 - 3500 RPM Machine with: Tool Pre setter Swarf Conveyor

Condition: used, Year of construction: 1995, operating hours: 6,807 h, lifting height: 4,730 mm, free lift: 1,670 mm, fuel type: diesel, mast type: triplex, fork length: 1,190 mm, fork width: 1,040 mm, total height: 2,150 mm, total length: 2,610 mm, total width: 1,200 mm, color: other, Empty weight: 4.622 kg Lifting capacity: 2.500 kg Nodpfsyyqtbox Anfswf - Year: 1995 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 15-01331 - Operating hours: 6807 - Lifting capacity: 2500kg - Lifting height: 4730mm - Overhead clearance: 2150mm - Free lift: 1670mm - Fork length: 1190mm - Maximum fork width: 1040mm - Minimum fork width: 210mm - Number of wheels: 4 Wheels - Attachment: 4th valve to fork carriage - Options: Free-lift, Half cabin, Work lights - Mast: Triplex - Drive: Diesel - Motor brand: Daewoo - Transport dimensions: 2610mm x 1200mm x 2150mm (l x w x h) - Transport weight [kg]: 4622kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, Year of construction: 2005, operating hours: 10,690 h, Type of fuel: Diesel Empty weight: 11.163 kg Dimensions (LxBxH): 365 x 209 x 386 cm Lifting capacity: 8.000 kg Lift height: 498 cm Fork dimensions: 990 x 2.010 mm - Year: 2005 - Documentation available: Yes - └ Type Documentation: User manual Nodpsyuxm Dsfx Anfjwf - CE marking present: Yes - CE certificate present: No - Serial number: 00065 - Operating hours: 10690 - Lifting capacity: 8000kg - Lifting height: 4980mm - Overhead clearance: 3860mm - Free lift: 0mm - Fork length: 990mm - Maximum fork width: 2010mm - Minimum fork width: 310mm - Number of wheels: 6 Wheels - Attachment: 3rd+4th valve to fork carriage - Options: Work lights, Full cabin - Mast: Duplex - Drive: Diesel - Motor brand: Daewoo - Transport dimensions: 3650mm x 2090mm x 3860mm (l x w x h) - Transport weight [kg]: 11163kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, functionality: fully functional, Year of construction: 2005, operating hours: 3,080 h, load capacity: 4,500 kg, lifting height: 6,050 mm, free lift: 1,800 mm, fuel type: gas, mast type: triplex, construction height: 2,780 mm, fork length: 1,200 mm, empty load weight: 7,500 kg, total length: 3,200 mm, drive type: Treibgas, construction width: 1,700 mm, LPG forklift Load center: 500 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: normal Front tire type: Superelastic Front tire condition: 0 - 20% Rear tire type: Superelastic Rear tire condition: 0 - 20% Description: Thorough cleaning, new inspection with oil and filter change, new set of 6 black tires, overhaul according to FEM incl. approval. Nwodpfjvcf Rnox Anfof Side shifter, 3rd valve, front work lights, full free lift, twin tires,

Condition: used, Year of construction: 2025, fuel type: diesel, power: 5 kW (6.80 HP), total length: 800 mm, total width: 600 mm, total height: 600 mm, Power: 8.1 Nedjyay Tijpfx Anfewf Current frequency: 50 Hz Voltage: 230/400

Condition: like new (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, nominal power (apparent): 61 kVA, torque: 1,675 Nm, controller manufacturer: FANUC, controller model: 18iMB, workpiece weight (max.): 1,200 kg, table width: 630 mm, table length: 630 mm, spindle speed (max.): 6,000 rpm, distance table to spindle center: 875 mm, distance table center to spindle nose: 1,000 mm, spindle nose: ISO #50 7/24 Taper, number of spindles: 1, number of slots in tool magazine: 40, ACE-HM630 – Specifications Travel X-axis (table longitudinal travel): 1,000 mm Y-axis (head vertical travel): 800 mm Z-axis (column cross travel): 850 mm Distance from spindle center to pallet top: 75–875 mm Distance from spindle nose to table center: 150–1,000 mm Njdpfx Ansx Ad Nlofjwf Table Pallet type: 24-M16 × P2.0 Tap Indexing degree: 0.001° Table loading capacity: 1,200 kg Pallet size: 630 × 630 mm Spindle Max spindle speed: 6,000 rpm Spindle taper: ISO #50 7/24 Taper Max spindle torque: 1,675.8 N·m Feedrate Rapid traverse (X/Y/Z): 24 m/min Cutting feedrate: 1–12,000 mm/min Automatic Tool Changer Tool shank: MAS 403 BT50 (DIN, CAT) Tool storage capacity: 40 Max tool diameter: 135 mm Max tool diameter (without adjacent tools): 250 mm Max tool length: 400 mm Max tool weight: 25 kg Max tool moment: 34.3 N·m Tool selection method: Fixed address Tool changing time (tool-to-tool): 2.5 sec Tool changing time (chip-to-chip): 8.5 sec Automatic Pallet Changer Number of pallets: 2 Type: Rotary Pallet change time: 25 sec Pallet rotation in loading station: 90° index Power Source Electrical power supply (rated capacity): 60.7 kVA Compressed air supply: 0.54 MPa Tank Capacity Coolant tank: 550 L Lubrication tank: 4.3 L Machine Size Machine height: 3,041 mm Machine dimensions (L × W): 6,485 × 3,857 mm Machine weight: 18,000 kg

Condition: ready for operation (used), Year of construction: 2003, operating hours: 232 h, travel distance X-axis: 390 mm, travel distance Z-axis: 780 mm, spindle motor power: 30,000 W, overall weight: 9,000 kg, number of axes: 2, Vertical turning machine manufactured in 2003. This DAEWOO PUMA V550 features an X-axis travel of approximately 390 mm and a Z-axis travel of approximately 780 mm. With a robust machine weight of 9000 kg, it is designed for durability and performance. If you are looking to get high-quality turning capabilities, consider the DAEWOO PUMA V550 machine we have for sale. Contact us for further details regarding this machine. • Electrical supply: AC 380/400 V, 3-phase, PE, 50/60 Hz • Rated power: 54.04 kVA • Current at full load: 78.01 A • Interrupting current: 9000 A • Electrical schematic version: PV15H688A03 Technical Specification Driven Tools No Nodpfx Ansyymnbofjwf

Condition: ready for operation (used), Year of construction: 2001, CNC Lathe Daewoo Puma 230 SB — Year of manufacture: 2001 Controlled axes: 3 (X – Z – B) CNC control: Fanuc Series 18-T Max. swing diameter over bed: 510 mm Max. turning diameter: 350 mm Max. turning length: 548 mm Bar capacity: Ø 65 mm Spindle mount: ASA A2-6" Nedpfx Ansy Ezg Asfewf Three-jaw chuck: 2 x collet chucks Spindle speed: 45 – 4,500 rpm Spindle motor power: 15 kW Travel X-axis: 205 mm Travel Z-axis: 580 mm Turret: 12 positions Sub spindle Chip conveyor: included Bar feeder 3 meters Machine weight: 4,240 kg

Condition: good (used), Year of construction: 2006, Parts shown by hand not come with machine. Nwjdpjyzyhqsfx Anfjf

Condition: used, Year of construction: 2000, operating hours: 16,672 h, functionality: fully functional, machine/vehicle number: 2S080254, turning diameter over cross slide: 250 mm, turning length: 400 mm, turning diameter: 250 mm, spindle bore: 50 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 250 mm, Equipment: documentation/manual, Very fast lathe, used only for finishing. Highly precise machine. Nwjdjyi Abhjpfx Anfjf

Condition: new, New electric scrubber dryer, floor cleaning machine DAEWOO model DAFL50A Year of manufacture 2024 – unused from stock Theoretical area coverage: 2,000 m²/h Working width: 510 mm Cleaning brush diameter: Ø 510 mm Brush speed: 175 RPM Squeegee width: 850 mm Clean water tank capacity: 50 liters Dirty water tank capacity: 50 liters Noise level: 66 dBa Climbing capacity: 2% Nodjxr N U Espfx Anfewf Battery voltage: 24 V, 100 AH - 24 V battery charger - 24 V, 100 AH battery - one cleaning brush - two separate tanks - without drive motor, the machine is pushed by hand or moves itself via the brush drive Machine length: 1,200 mm Machine width: 510 mm Squeegee width: 850 mm Machine height: 1,350 mm Unladen weight: 160 kg New – in original packaging – unused from stock

Condition: good (used), Year of construction: 2001, Parts shown by hand not come. • Daewoo MYNX 540, Baujahr 2001 • die Spindel wurde im Frühling 2025 revidiert, neue Lager!! • die 4.Achse gehört mit dazu • ACHTUNG, das liegende 3-Backenfutter NICHT Arbeitsbereich X-Achse mm 1020 Y-Achse mm 510 Z-Achse mm 625 Aufspanntisch Tischgrösse mm 1200 x 500 4 T-Nuten mm 18H8 T-Nuten Abstand mm 125 Abstand Tisch-Spindelnase mm 150 - 775 Abstand Spindelmitte-Ständer mm 520 Tischbelastung kg 800 Spindelstock Antriebsleistung kW 11/15 Drehzahlbereich, stufenlos U/min 80 - 8000 Bereich konstanter Leistung U/min 750 - 8000 Drehmoment, max. Nm 190 Spindelkonus DIN 69871A ISO 40, SK40 Anzugsbolzen DIN 69872 STANDARDZUBEHOER • - FANUC CNC-Bahnsteuerung Modell 21 i-MA mit 9,5" LCD Monochrom Bildschirm, • Teileprogrammspeicher 32 kB/80 m • - RIGID TAPPING - Gewindebohren ohne Ausgleichsfutter • - 24-fach Tellermagazin • - Werkzeugaufnahme im Spindelkonus ISO 40, DIN 69871A/DIN 69872, SK40 • - FANUC AC-Hauptantrieb mit 11/15 kW Motor • - Drehzahlbereich 80-8000 U/min, stufenlos • - Kühlmittelversorgung aus dem 300 Litertank, Pumpe 1,5 bar SONDERZUBEHOER • - Spindelölkühler • - Kühlmittelzufuhr durch die Spindel (Form A) DIN 69871 Nwedpfx Anoyfg Taefsf • mit 10 bar Pumpe und Patronenfilter • - Kühlmittelpumpe 6 bar • - Vorbereitung für 4. Achse • - KITAGAWA CNC-Rundtisch Typ RS 250 RAHO • mit Motor Fanuc und 4. Achse in Maschine

Year of construction: 2001, condition: good (used), Parts shown by hand not come. Njdpfx Aolyrbzonfswf Technical book with characteristics of machine is in attachment.

Condition: good (used), Year of construction: 1998, Parts shown by hand not come. Technical data are shown on picture. Nwsdpjwb Aqnsfx Anfef

Condition: good (used), Year of construction: 2000, Machine come without tool holders and any additional equipement. Parts shown by hand not come. Technical details are shown on picture. Nwjdpfx Aew Tc S Usnfef

Condition: used, Year of construction: 1999, functionality: fully functional, turning diameter over cross slide: 330 mm, turning length: 548 mm, turning diameter: 350 mm, spindle bore: 65 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 45 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 580 mm, spindle motor power: 15,000 W, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 25 m/min, rotational speed (min.): 45 rpm, rotational speed (max.): 4,500 rpm, total height: 1,740 mm, total length: 2,997 mm, total width: 1,670 mm, feed length X-axis: 205 mm, feed length Z-axis: 580 mm, quill travel distance: 580 mm, quill diameter: 75 mm, quill stroke: 80 mm, swing diameter over cross slide: 330 mm, feed rate X-axis: 20 m/min, feed rate Z-axis: 25 m/min, workpiece weight (max.): 350 kg, type of input current: three-phase, overall weight: 4,240 kg, spindle nose: A2-6, center height: 255 mm, bar diameter (max.): 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, Daewoo Puma 230B CNC Lathe — Year 1999 Controlled axes: 2 (X – Z) CNC Control: Fanuc Series 18-T Nwjdpfxjy D Higj Anfof Max. swing over bed: 510 mm Max. turning diameter: 350 mm Max. turning length: 548 mm Bar capacity: Ø 65 mm Spindle mount: ASA A2-6" Chuck: Ø 210 mm — 3 jaws Spindle speed: 45 – 4,500 rpm Spindle motor power: 15 kW X-axis travel: 205 mm Z-axis travel: 580 mm Turret: 12 positions — no driven tools Tailstock: present (quill Ø 75 mm, stroke 80 mm, MT 4) Chip conveyor: included Machine weight: 4,240 kg CE compliance: yes

Condition: used, Year of construction: 2001, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 575 mm, overall weight: 7,500 kg, SPECIFICATIONS Longitudinal travel: 1020 mm Cross travel (Y): 510 mm Nwsdpfew S E Ngjx Anfof Vertical travel (Z): 575 mm CNC type: SIEMENS Table length: 1200 mm Table width: 500 mm Max. permitted weight: 800 kg Number of tools: 30 Spindle taper: ISO 40 Max. spindle speed: 8000 rpm Spindle motor power: 15 kW Dimensions (L x W x H): 3275 × 2948 × 2996 mm Weight: 7500 kg Year of manufacture: 2001

Condition: used, New diesel generator set, power generator, emergency generator RTE Model: 50 kVA – identical to DAEWOO DAGFS 50 Brand new, unused, year of manufacture 2025 Rated output: 50 kVA Continuous output: max. 40 kVA Standby output: 55 kVA / 44 kW Rated current: 33 A Voltage: 400/230 V, 50 Hz 230 V, 50 Hz Fuel consumption: 99-liter tank for up to 8.5 hours of operation at 75% load Nwodexlkq Uepfx Anfjf Fuel consumption at 75% load: approx. 11 liters/hour Fuel consumption in standby mode: approx. 4 liters/hour Drive engine: 4-cylinder Ricardo ZH4105ZD inline diesel engine Engine power at 1500 rpm: 45 kW Engine power at 1800 rpm: 55 kW Displacement: 1500 cc Tank capacity: 99 liters - Simple and compact design with soundproof metal enclosure - Forklift pockets for easy and safe transportation - 3x CEE 16A sockets (3-pin, 230V) - 1x CEE 16A socket (5-pin, 400V) - Terminal connections for cable power supply for external consumers, e.g., site distribution boards - ATS module for mains backup operation, enables automatic emergency power switching in case of power failure Required space (L x W x H): 2150 x 950 x 1200 mm Weight: 900 kg New machine from stock

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 6,000 rpm, spindle motor power: 11,100 W, overall weight: 3,500 kg, controller manufacturer: FANUC, controller model: 0i-T, number of axes: 2, This DAEWOO Puma 160 was manufactured in 2004. A robust horizontal turning machine featuring a Fanuc 0i-T control system, it supports a turning diameter up to 160 mm and a length up to 250 mm. With a spindle speed of up to 6000 rpm and a main motor power of 11.1 kW, it's ideal for precise operations. Machine weight ranges from 3,000 to 3,500 kg. Contact us for more information about this machine. Additional equipment • Included in the offer: A set of tools. Nwsdpfx Ajyar Eqsnfjf Machine Benefits Technical Machine Benefits • Turning diameter: up to 160 mm • Turning length: up to 250 mm Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 170 mm, rotational speed (max.): 8,000 rpm, The machine is in good technical condition, connected and available for testing, with a 30-tool magazine and Fanuc control system. Nwjdpfxjy Ewwqs Anfef

Condition: used, DAEWOO PUMA 300 LB (Doosan) 2-axis CNC lathe CNC Fanuc 18T Hydraulic tailstock Njdpfxoqfm A Ae Anfswf Condition: very good. This machine can be inspected in our warehouse, under power. Mimu machine tools Italy