Used Demag Ac 40 City for sale (508)

Condition: used, DEMAG pillar jib crane type KBK 1 Year of construction: approx. 1980 Load capacity 500 kg Swivel range 270° Outreach 2000 mm Height 2300 mm Height to lower edge of boom 1800 mm - Boom profile DEMAG C-profile rail KBK 1 - Carriage for DEMAG C-profile rail KBK 1 - Crane column base plate L x W x H = 370 x 370 x 20 mm (4 holes Ø approx. 27 mm) Dependent weight 145 kg Hedpfjvp Ryhox Abdsi

Condition: used, Crane hook, lifting block, lower block for DEMAG rope hoist, 2-sheave type Load hook Load capacity rated at 5 tons 2-sheave for 4 rope falls Rope diameter: approx. 13 mm Distance from top of block to bottom of latch hook: 650 mm From center of sheave to bottom of latch hook: 450 mm Dimensions (L x W x H): 350 x 315 x 650 mm Hjdpsw Nxy Hsfx Abdsi Net weight: 73 kg Used, in good condition

Condition: used, Crane motor, travel drive crane bridge drive with gearbox Sliding anchor motor, sliding anchor motor, three-phase electric motor, brake motor, Hodpfjptlblex Abdji crane motor, cable drive, crane drive, hoist motor, fine hoist motor Manufacturer: DEMAG Motor type: 24/10 KF8-2 Motor No.: 982869 Motor type: B5 Rated voltage: 380 VAC Rated frequency: 50 Hz Power stage 1: 0,58 kW = 715 rpm. Power stage 2: 2,3 kW = 2900 rpm. with gearbox DEMAG type KS 12 Reduction gearbox fabric. no. 1909104 gear ratio: i = 118 with impeller for crane rail 2 pieces available, price per piece

Condition: ready for operation (used), Year of construction: 2013, operating hours: 27,551 h, clamping force: 2,200 kN, total height: 2,100 mm, This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. It's an electrical injection moulding machine known for its precision and efficiency. Ideal for those looking to enhance their production capabilities with reliable technology. Contact us for more information. Additional equipment • Sepro Robot SDR 22 Machine Benefits Technical Machine Benefits • Screw diameter: 45 mm / screw geometry: standard / l/d ratio: 20 / specific injection pressure: 2150 bar / maximum shot volume: 329 cm³ / maximum shot weight: 293 g / injection rate without accumulator: 254 cm³/s • Dosing stroke: 207 mm / maximum nozzle stroke: 450 mm / nozzle immersion depth: 20 mm / nozzle contact force: 58 kn / number of heating zones: 4 / hopper capacity: 50 l / maximum injection speed: 160 mm/s • Holding force: 2420 kn / maximum opening stroke: 550 mm / minimum mold height: 300 mm / maximum mold height: 580 mm / maximum platen distance: 1130 mm • Mold clamping plates (hxv): 880x830 mm / clearance between tie bars (hxv): 610x560 mm / ejector stroke: 150 mm / ejector force: 58 kn • Dry cycle time according to euromap 6 (stroke): 427 mm Hedjx D Hnyepfx Abdei • Net weight without oil: 10100 kg Dimensions Machine Depth 6460 mm

Condition: used, Year of construction: 2004, clamping force: 110 kN, displacement volume: 2,926 cm³, injection pressure: 1,600 bar, overall weight: 5,650 kg, screw conveyor diameter: 45 mm, terms of delivery: EXW (ex Works) delivery time: on request Hjdpfx Asymqz Rsbdsi terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2005, clamping force: 110 kN, displacement volume: 2,926 cm³, injection pressure: 1,600 bar, overall weight: 5,650 kg, screw conveyor diameter: 45 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Hodpfsymqz Dox Abdsi

Condition: used, Year of construction: 2005, clamping force: 110 kN, displacement volume: 398 cm³, injection pressure: 1,550 bar, overall weight: 5,700 kg, screw conveyor diameter: 50 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Hjdpfx Abeymqzqedoi

Condition: used, Year of construction: 2005, clamping force: 110 kN, displacement volume: 398 cm³, injection pressure: 1,550 bar, overall weight: 5,700 kg, screw conveyor diameter: 50 mm, terms of delivery: EXW (ex Works) Hodpfxoymqzke Abdsi delivery time: on request terms of payment: 100% prior to delivery

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1992, total length: 23,880 mm, load capacity: 10,000 kg, working height: 10,000 mm, Equipment: documentation/manual, Overhead Crane Deman/Demag – Type: double girder – Capacity: 10 tons – Lifting height: 10 m – Year of manufacture: 1992 – FEM / ISO hoist classification: 1 Am – Hoist type: Demag DH 525 wire rope hoist Dimensions – Span: 23,880 mm (centre-to-centre) Speeds: Hjdpfeyi Dv Hex Abdoi – Lifting: 6.3/0.63 m/min – Trolley travel: 25/6.3 m/min – Crane travel: 40/10 m/min Features: – Operation: radio remote control – Crane documentation available: yes – Electrical diagrams available: yes – Condition: in good condition, well maintained – Available April 2026

Condition: excellent (used), Year of construction: 1991, load capacity: 2,000 kg, Overhead Crane DEMAG - M + PK10-N-F MACH-ID 9360 Make: DEMAG Type: M + PK10-N-F Year: 1991 Motorized swiveliing 0 - 27-0 Gr Lifting capacity 2000 Kg High speed 4000 mm/Min Low speed 10000 mm/Min Books / Inspection books included Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Hjdsyfd N Sspfx Abdsi

Condition: good (used), functionality: unexamined, Year of construction: 1990, PARIS area – Dismantling planned for MARCH 2026, price for all items, dismantling service available on request 1. A: ADC 5T overhead crane, height 4,360mm, span/beam 15,700mm, 5,000kg 2. A: Europont 1T crane with Verlinde hoist, wired control, Verlinde, height 4,360mm, span 15,700mm, 1,000kg 3. B: Europont 1T crane with Verlinde VL10 hoist, Verlinde, span 15,700mm, 1,000kg 4. C: DEMAG 1T crane, beam 10,800mm, rail track 30m, Verlinde VX10 1008 B2 hoist, 2022, span 10,800mm, 1,000kg 5. C: DEMAG 1T crane, beam 10,800mm, rail track 30m, Verlinde VL10 1004 B2 hoist, 2006, span 10,800mm, 1,000kg 6. C: DEMAG 1T crane, beam 10,800mm, rail track 30m, Verlinde, span 10,800mm, 1,000kg 7. C: DEMAG 1T crane, beam 10,800mm, rail track 30m, Verlinde, span 10,800mm, 1,000kg Hedpfx Asykrt Asbdei 8. D: 3 x 1-ton hoists on purple rails, 37m, height 4,360mm, 3 x 1,000kg 9. D: Konecranes 2014, 160kg Verlinde hoist, height 2.80m, beam 3m, year 2014, 160kg 10. E: Konecranes, 160kg, beam 10m, height 3m, 2014, 160kg

Condition: used, Year of construction: 2004, clamping force: 200 kN, displacement volume: 763 cm³, injection pressure: 1,905 bar, overall weight: 10,600 kg, screw conveyor diameter: 60 mm, terms of delivery: EXW (ex Works) Hjdoylz Apjpfx Abdei delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2003, clamping force: 150 kN, displacement volume: 399 cm³, injection pressure: 1,598 bar, overall weight: 7,500 kg, screw conveyor diameter: 50 mm, terms of delivery: EXW (ex Works) delivery time: on request Hsdpeylz Aisfx Abdei terms of payment: 100% prior to delivery

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, 2 identical DEMAG hoists P425 H11, Hedewaflfjpfx Abdsi Load capacity: 10 tonnes Lifting speed: 5.5 m/min Fine lifting speed: 0.5 m/min From a large spare parts warehouse, please also see my other offers Info: We have over 20,000 DEMAG items in stock! Check my other offers from our warehouse inventory as well!

Condition: reconditioned (used), Year of construction: 2000, Manufacturer: Demag Type: DH520 H20 4/1 F10 Hodpfx Aekqm Aisbdoi Year of manufacture: 2000 lifting capacity appr.: 8.000 kg hook path appr.: 10,000 mm trolley track appr.: 1,400 mm Reeving: 4/1 Thruster group: FEM/ISO 2m/M5 Working speeds: hoist appr. 0.8/8.0 m/min trolley appr. 5.0/20.0 m/min Certification of the remaining service life of appr. 80% by an inspection expert Equipped with: - Mechanical fine lift F10 - Rope and bottom block 4/1 - trolley

Condition: reconditioned (used), Year of construction: 2004, Brand: DEMAG Hedjgiyf Aepfx Abdei Type: DH1063 H24 4/1 FG10 Year of construction: 2004 Load-capacity appr.: 25.000 kg Hook-Path appr.: 12.000 mm Load-classification: FEM/ISO 1Bm/M3 Working-speeds: Hoist appr. 6,3/0,6 m/min Certification of the remaining useful life of appr. 80% by an inspection expert. Equipped with: - Rope - Fine stroke FG10

Condition: good (used), Year of construction: 1975, Crane trolley DEMAG Type:PL 168 NF Year 1975 lifting capacity 3200 KG lifting height 4 m Hodpfeubbr Tox Abdji with operating bottle in good condition.

Year of construction: 1979, condition: good (used), Overhead Crane DEMAG Type: EKKE Year 1979 Hedpoh Uqbfefx Abdei Lifting capacity 7500Kg. span width : 7500mm Hook height : 5500mm Complete with traction motors and hoisting gear from DEMAG Crane documentation and test book reports, plans available with 20 meter power rail included.

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 8754-0010, Plastic Injection Moulding Machine | DEMAG Ergotech - Multi 125/475-120h/80v (1250-120-80) Clamping force [kN]: 1,250 Number of components: 3 Clamping platen width [mm]: 690 Clamping platen height [mm]: 660 Hjdpfx Abjyguk Ajdji Clear tie bar spacing horizontal [mm]: 475 Clear tie bar spacing vertical [mm]: 450 Locating ring diameter [mm]: 125 Minimum mold height [mm]: 230 Maximum mold height [mm]: 560 Maximum mold opening stroke [mm]: 450 Maximum ejector stroke [mm]: 140 Thread (mounting holes) [M]: 16 Multi turntable type: Rotary table Turntable diameter [mm]: 700 Turntable threads [M]: 16 Maximum mould weight [kg]: 1,160 Maximum mould weight moving side [kg]: 760 Screw diameter [mm]: EE1: 25, EE2: 22, EE3: 14 Maximum shot weight [g] PS: EE1: 63, EE2: 48, EE3: 20 Aggregate configuration: EE1: horizontal, EE2: vertical, EE3: L-position Equipment: 2-core pull, with robot An inspection is possible at any time by appointment. Free loaded onto truck (Butzbach). #Tags: DEMAGergo | Ergotec | Multi125-475

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 7174-0115, Plastic Injection Moulding Machine | DEMAG Ergotech - Multi 110/470-200h/120v (1100-200h/120v) Clamping Force [kN]: 1,100 Hodpfxjyguhhs Abdsi Number of components: 2 Clamping plate width [mm]: 670 Clamping plate height [mm]: 670 Clear tie bar spacing, horizontal [mm]: 470 Clear tie bar spacing, vertical [mm]: 470 Centering ring diameter [mm]: 125 Minimum mould height [mm]: 240 Maximum mould height [mm]: 600 Maximum opening stroke [mm]: 600 Maximum ejector stroke [mm]: 180 Thread [M]: 16 Multi turntable type: Rotary table Turntable diameter [mm]: 600 Turntable thread [M]: 16 Maximum tool weight [kg]: 1,000 Maximum tool weight, movable side [kg]: 500 Screw diameter [mm]: EE1: 30, EE2: 22 Maximum shot weight [g] PS: EE1: 94, EE2: 42 Aggregate configuration: EE1: horizontal, EE2: vertical Equipment: 2-core pull, with robot Inspection possible at any time by appointment. Free on truck, loaded (Butzbach). - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DEMAGergo | Ergotec | Multi110/470

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: FI126/4 / FI128/5, 1 Demag KBK II Wall-Mounted Slewing Crane, 250 kg rated load Crane available 2x!!! Hsdjyl Syfopfx Abdoi Jib length 4 m, rated load 250 kg Includes Demag PK chain hoist, rated load 250 kg (older model) Weight incl. wall bracket approx. 200 kg Complete with chain hoist, cable trolley, trolley and small parts Slewing range 270° Item location: 75053 Gondelsheim System is fully dismantled and immediately available Shipping via freight forwarder or collection Shipping costs on request according to postal code

Condition: ready for operation (used), Year of construction: 1995, operating hours: 122,158 h, clamping force: 3,300 kN, screw diameter: 60 mm, This DEMAG ET 330 - 1450 hydraulic injection moulding machine was manufactured in 1995. It features a clamping force of 3300 kN and a screw diameter of 60 mm, providing robust performance for various applications. The machine includes a Wittmann W322-121 linear robot for enhanced automation. Consider the opportunity to buy this DEMAG ET 330 - 1450 hydraulic injection moulding machine. Contact us for further details. • Clamping unit: • Locking force: 3630 kN • Tie bar spacing (H x V): 710 x 630 mm • Platen dimensions (H x V): 1040 x 950 mm • Mold installation height: min 330 mm / max 830 mm • Opening stroke: 675 mm • Platen distance (daylight): 1505 mm • Permissible mold weight: fixed side (DS) 1200 kg; moving side (AS) 2400 kg; total 3600 kg • Ejector: stroke 200 mm; force 80 kN; retraction force 35 kN • Core pull control: yes (2 units, on ejector side/AS) • Shut-off nozzle: yes (hydraulic/pneumatic 1/1) • Injection unit 1: • Unit code: 1450-60 • Screw diameter: 60 mm • Injection pressure: 1905 bar • Stroke volume: 763 ccm • Shot weight (PS): 695 g • Screw L/D ratio: 20 • Nozzle radius: 15 mm • Max dosing stroke: 270 mm • Plasticizing flow: 41 g/s • Configuration/controls: • Armored (wear-resistant) injection unit: yes • Pneumatic ejector: yes Hsdpfoyg Nkwox Abdsi • Process control: SPC (Yes/Yes) • Printer interface: integrated • Hot runner control: 0-zone (none) • Maintenance: • Hose replacement performed in 2017 Additional equipment • Wittmann W322-121 CNC linear robot/removal device (included with the machine) • Travel paths: Y-axis 1600 mm, X-axis 500 mm, Z-axis 2500 mm

Condition: ready for operation (used), Year of construction: 2003, operating hours: 96,986 h, clamping force: 600 kN, screw diameter: 30 mm, This DEMAG ET60-200 concept hydraulic injection moulding machine was manufactured in 2003. It features a clamping force of 600 kN and a maximum mold weight of 580 kg. The machine includes a robust injection unit with a screw diameter of 30 mm and an injection pressure of 1900 bar. Consider the opportunity to buy this DEMAG ET60-200 concept hydraulic injection moulding machine. Contact us for further details. • Clamping unit: • Tie bar spacing (H x V): 420 x 420 mm • Platen dimensions (H x V): 530 x 540 mm • Min. mold installation height: 210 mm • Opening stroke: 400 mm Hsdjyg Nfuspfx Abdsi • Max. mold weight: 580 kg (moving side 380 kg / fixed side 200 kg) • Ejector: • Stroke: 125 mm • Force: 41 kN • Retraction force: 15 kN • Pneumatic ejector: Yes • Core pull control: Yes (2 units, on the ejector side/AS) • Injection unit 1: • Unit size: 200 • Screw diameter: 30 mm • Injection pressure: 1900 bar • Stroke volume: 106 ccm • Shot weight (PS): 94 g • Screw L/D: 20 • Nozzle radius: 15 mm • Armored/wear-resistant injection unit: Yes • Process control: SPC (Yes) • Note: Maximum crane load warning: 2 metric tons Additional equipment • Robot/removal device: W621-1381 • Travel paths: Y 1200 mm, X 550 mm, Z 1500 mm • Hot runner controller: 7-zone integrated control • Mold sensors: Kistler (p=1/t=0)

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 862-1053, Plastic Injection Moulding Machine | Mannesmann DEMAG - Ergotech 5000-2300 Clamping force [kN]: 5,000 Number of components: 1 Clamping platen width [mm]: 1,300 Clamping platen height [mm]: 1,200 Clear tie bar spacing, horizontal [mm]: 900 Clear tie bar spacing, vertical [mm]: 800 Centering ring diameter [mm]: 200 Minimum mould installation height [mm]: 400 Maximum mould installation height [mm]: 880 Hedpoygikwefx Abdoi Maximum opening stroke [mm]: 810 Maximum ejector stroke [mm]: 230 Thread [M]: 24 Maximum mould weight [kg]: 6,700 Maximum mould weight, moving side [kg]: 4,400 Screw diameter [mm]: EE1: 60 Maximum shot weight [g] PS: EE1: 800 Injection unit configuration: EE1: horizontal Equipment: 2-core pull, with robot An inspection is possible at any time by appointment. Loaded free on truck (Butzbach). #Tags: Mannesmann-DEMAG | Ergotec | Ergotech5000

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 7363-0044, Plastic injection moulding machine | Sumitomo SHI DEMAG - Systec 100/420-310 (1000-310) Clamping force [kN]: 1,000 Number of injection units: 1 Clamping platen width [mm]: 600 Clamping platen height [mm]: 600 Tie bar spacing horizontal [mm]: 420 Tie bar spacing vertical [mm]: 420 Locating ring diameter [mm]: 125 Minimum mould height [mm]: 250 Maximum mould height [mm]: 500 Maximum daylight [mm]: 500 Maximum ejector stroke [mm]: 150 Thread [M]: 16 Maximum mould weight [kg]: 780 Maximum mould weight, movable side [kg]: 500 Hodpfoygiafex Abdsi Screw diameter [mm]: EE1: 35 Maximum shot weight [g] PS: EE1: 149 Aggregate configuration: EE1: horizontal Equipment: 1 core pull, stacking station, with robot Inspection possible at any time by arrangement. Free loaded onto truck (Butzbach). #Tags: Sumitomodemag | Systec400 | 100-420-310