Used Demag Faw 1 for sale (511)

Condition: ready for operation (used), load capacity: 10,000 kg, empty load weight: 3,500 kg, Demag DH-takel: EZDH 325 H12 K-V2-4/1 F10 Kind of: overhead travelling crane Span: 11 360 mm Bledpjxq Hqnsfx Aa Nod Tackle speed: 0,4 & 4 m/min Rotationspeed: 8 & 31 m/min Displacementspeed: 10 & 40 m/min Numbre of riggers: double rigger

Condition: ready for operation (used), load capacity: 6,300 kg, Demag 6,3 ton x 11 410 mm Kind of: overhead travelling crane Span: 11 410 mm Bljdpfx Ajwu Inxoa Nod Radiocontrol: no radio control Numbre of riggers: double rigger

Condition: ready for operation (used), load capacity: 10,000 kg, empty load weight: 4,850 kg, Demag EKDH 625 H20 K-V2-4/1-F6 Kind of: overhead travelling crane Span: 14 300 mm Tackle speed: 0,6 > 4 m/min Rotationspeed: 5 > 20 m/min Displacementspeed: 6,3 > 40 m/min Numbre of riggers: single rigger Bljdjxq Hqujpfx Aa Nod

Condition: excellent (used), Control switch Make DEMAG Type DSE 10 C/CS Documents available Blodpfx Aaef Ezbtj Ned

Condition: used, mileage: 62,585 km, Year of construction: 2020, operating hours: 5,422 h, General information Field of application: Construction Serial number: 82609 Blsdpfx Aowk T Uija Ned Drivetrain Drive: Wheel Weights Empty weight: 48.000 kg Functional Lifting capacity: 220.000 kg Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Carrier engine: - Upper engine: - Counterweight: 70200 Transport dimensions (LxWxH): 15.3x3x4 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Year of construction: 2014, clamping force: 6,500 kN, Demag System 200/500 This Sumitomo Demag injection moulding machine Systec 650/1020-2300 from 2014 is being auctioned, including the conveyor technology and a hot stamping unit, during our industrial auction "Injection Moulding Machines - DEMAG System, KraussMaffei, Sumitomo" in Babenhausen until 10.03. The auction is taking place on our RESTLOS online platform. Viewing by appointment is possible on Monday, 09.03.2026 from 10:00 to 11:00. Further details about the machine: Sumitomo Bedsyn Acpepfx Aa Nsld including handling and conveyor belt - Year of manufacture: 2014

Condition: used, Year of construction: 2002, clamping force: 1,500 kN, This Demag Ergotech injection moulding machine 1500-440 from 2002, equipped with a Krauss Maffei robot and a CO2 marking laser, is being auctioned in our industrial auction "Injection Moulding Machines – DEMAG System, KraussMaffei, Sumitomo" in Babenhausen until 10.03. The auction is held on our RESTLOS online platform. Further machine details: Demag Ergotech system - Year of manufacture: 2002 Blodpfx Aeynz R Esa Ned - Weight: 7.5 t

Condition: used, mileage: 62,585 km, Year of construction: 2020, operating hours: 5,422 h, Drivetrain Drive: Wheel Weights Empty weight: 48.000 kg Functional Lifting capacity: 220.000 kg Identification Serial number: 82609 Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Carrier engine: - Upper engine: - Bsdpfswk Aw Hex Aa Nold Counterweight: 70200 Transport dimensions (LxWxH): 15.3x3x4 Additional information Please contact PFEIFER GROUP for more information

Condition: used, Crane motor, travel drive crane bridge drive with gearbox Sliding anchor motor, sliding anchor motor, three-phase electric motor, brake motor, crane motor, cable drive, crane drive, hoist motor, fine hoist motor Manufacturer: DEMAG Motor type: 24/10 KF8-2 Motor No.: 982869 Motor type: B5 Rated voltage: 380 VAC Rated frequency: 50 Hz Power stage 1: 0,58 kW = 715 rpm. Power stage 2: 2,3 kW = 2900 rpm. with gearbox DEMAG type KS 12 Reduction gearbox fabric. no. 1909104 gear ratio: i = 118 with impeller for crane rail 2 pieces available, price per piece Blodpfx Aasptlble Njd

Condition: ready for operation (used), Year of construction: 2013, operating hours: 27,551 h, clamping force: 2,200 kN, total height: 2,100 mm, This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. It's an electrical injection moulding machine known for its precision and efficiency. Ideal for those looking to enhance their production capabilities with reliable technology. Contact us for more information. Additional equipment • Sepro Robot SDR 22 Machine Benefits Technical Machine Benefits Bodpfxox D Hnye Aa Njld • Screw diameter: 45 mm / screw geometry: standard / l/d ratio: 20 / specific injection pressure: 2150 bar / maximum shot volume: 329 cm³ / maximum shot weight: 293 g / injection rate without accumulator: 254 cm³/s • Dosing stroke: 207 mm / maximum nozzle stroke: 450 mm / nozzle immersion depth: 20 mm / nozzle contact force: 58 kn / number of heating zones: 4 / hopper capacity: 50 l / maximum injection speed: 160 mm/s • Holding force: 2420 kn / maximum opening stroke: 550 mm / minimum mold height: 300 mm / maximum mold height: 580 mm / maximum platen distance: 1130 mm • Mold clamping plates (hxv): 880x830 mm / clearance between tie bars (hxv): 610x560 mm / ejector stroke: 150 mm / ejector force: 58 kn • Dry cycle time according to euromap 6 (stroke): 427 mm • Net weight without oil: 10100 kg Dimensions Machine Depth 6460 mm

Condition: used, Year of construction: 2004, clamping force: 110 kN, displacement volume: 2,926 cm³, injection pressure: 1,600 bar, overall weight: 5,650 kg, screw conveyor diameter: 45 mm, terms of delivery: EXW (ex Works) Bsdpfx Aaeymqz Ro Nold delivery time: on request terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2005, clamping force: 110 kN, displacement volume: 2,926 cm³, injection pressure: 1,600 bar, overall weight: 5,650 kg, screw conveyor diameter: 45 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Bljdpfx Aajymqz Ds Njd

Condition: used, Year of construction: 2005, clamping force: 110 kN, displacement volume: 398 cm³, injection pressure: 1,550 bar, overall weight: 5,700 kg, screw conveyor diameter: 50 mm, terms of delivery: EXW (ex Works) delivery time: on request Bjdpfx Aasymqzqs Njld terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2005, clamping force: 110 kN, displacement volume: 398 cm³, injection pressure: 1,550 bar, overall weight: 5,700 kg, screw conveyor diameter: 50 mm, terms of delivery: EXW (ex Works) Bljdpfxeymqzko Aa Nsd delivery time: on request terms of payment: 100% prior to delivery

Year of construction: 1997, condition: excellent (used), machine/vehicle number: GO 832 833, Demag ELKE crane canopy crane track bridge crane hall crane 2x available!!! Payload / lifting capacity 1.6 to 1600 kg Track 11785 mm, external dimensions approx. 12000 mm Blsdpfxoum I Ako Aa Nod Year of manufacture 1997 with floor control Lifting height 3 m Height from top edge of crane girder to bottom edge of hook approx. 900 mm Head girder length approx. 200 cm Crane is dismantled and immediately available Matching busbars can also be supplied. Please enquire Very good condition, inspection book is available Pillar jib cranes and wall jib cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight forwarder possible, please enquire by postcode Pickup preferred

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: FI127/3, 1 Demag KBK I wall-mounted slewing jib crane, 125 kg load capacity Jib length 4m, load capacity 125 kg Equipped with Abus GM chain hoist, load capacity 125 kg Weight including wall bracket approx. 200 kg Blodpfx Aeynv Hhea Nsd Complete with chain hoist, cable trolley, travel carriage, and small parts Slewing range 270° Item location: 75053 Gondelsheim System is fully dismantled and immediately available Shipping via freight carrier or collection Shipping costs upon request, depending on postal code

Condition: excellent (used), Year of construction: 1991, load capacity: 2,000 kg, Overhead Crane DEMAG - M + PK10-N-F MACH-ID 9360 Make: DEMAG Type: M + PK10-N-F Year: 1991 Motorized swiveliing 0 - 27-0 Gr Lifting capacity 2000 Kg High speed 4000 mm/Min Low speed 10000 mm/Min Books / Inspection books included Bledpfxeyfd N Sj Aa Njd Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2004, clamping force: 200 kN, displacement volume: 763 cm³, injection pressure: 1,905 bar, overall weight: 10,600 kg, screw conveyor diameter: 60 mm, terms of delivery: EXW (ex Works) delivery time: on request Blsdeylz Apopfx Aa Nsd terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2003, clamping force: 150 kN, displacement volume: 399 cm³, injection pressure: 1,598 bar, overall weight: 7,500 kg, screw conveyor diameter: 50 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Bedpfjylz Aiex Aa Nold

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, 2 identical DEMAG hoists P425 H11, Load capacity: 10 tonnes Blsdpfxjwaflfs Aa Njd Lifting speed: 5.5 m/min Fine lifting speed: 0.5 m/min From a large spare parts warehouse, please also see my other offers Info: We have over 20,000 DEMAG items in stock! Check my other offers from our warehouse inventory as well!

Year of construction: 2000, condition: used, machine/vehicle number: SIxx, Demag chain hoist crane hoist 5000 kg DKUN 20-2500 K V1 F4 Bjdpfx Aorft Nzea Njld Payload 5000KG / 5t payload / lifting load - 2-strand with 2 lifting speeds, lifting height approx. 6m without control bottle, complete with lifting eye and chain storage Complete weight approx. 120 kg, connection to 400V 50Hz Used Condition Item location is 75053 Gondelsheim See pictures

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 8754-0010, Plastic Injection Moulding Machine | DEMAG Ergotech - Multi 125/475-120h/80v (1250-120-80) Clamping force [kN]: 1,250 Number of components: 3 Clamping platen width [mm]: 690 Clamping platen height [mm]: 660 Clear tie bar spacing horizontal [mm]: 475 Clear tie bar spacing vertical [mm]: 450 Locating ring diameter [mm]: 125 Minimum mold height [mm]: 230 Maximum mold height [mm]: 560 Maximum mold opening stroke [mm]: 450 Maximum ejector stroke [mm]: 140 Thread (mounting holes) [M]: 16 Multi turntable type: Rotary table Turntable diameter [mm]: 700 Turntable threads [M]: 16 Maximum mould weight [kg]: 1,160 Maximum mould weight moving side [kg]: 760 Screw diameter [mm]: EE1: 25, EE2: 22, EE3: 14 Maximum shot weight [g] PS: EE1: 63, EE2: 48, EE3: 20 Aggregate configuration: EE1: horizontal, EE2: vertical, EE3: L-position Equipment: 2-core pull, with robot An inspection is possible at any time by appointment. Free loaded onto truck (Butzbach). Bodpfxsyguk Ae Aa Njld #Tags: DEMAGergo | Ergotec | Multi125-475

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 7174-0115, Plastic Injection Moulding Machine | DEMAG Ergotech - Multi 110/470-200h/120v (1100-200h/120v) Clamping Force [kN]: 1,100 Number of components: 2 Clamping plate width [mm]: 670 Clamping plate height [mm]: 670 Clear tie bar spacing, horizontal [mm]: 470 Clear tie bar spacing, vertical [mm]: 470 Centering ring diameter [mm]: 125 Minimum mould height [mm]: 240 Maximum mould height [mm]: 600 Maximum opening stroke [mm]: 600 Maximum ejector stroke [mm]: 180 Thread [M]: 16 Multi turntable type: Rotary table Turntable diameter [mm]: 600 Turntable thread [M]: 16 Maximum tool weight [kg]: 1,000 Maximum tool weight, movable side [kg]: 500 Screw diameter [mm]: EE1: 30, EE2: 22 Blodeyguhhjpfx Aa Njd Maximum shot weight [g] PS: EE1: 94, EE2: 42 Aggregate configuration: EE1: horizontal, EE2: vertical Equipment: 2-core pull, with robot Inspection possible at any time by appointment. Free on truck, loaded (Butzbach). - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DEMAGergo | Ergotec | Multi110/470

Condition: ready for operation (used), Year of construction: 1995, operating hours: 122,158 h, clamping force: 3,300 kN, screw diameter: 60 mm, This DEMAG ET 330 - 1450 hydraulic injection moulding machine was manufactured in 1995. It features a clamping force of 3300 kN and a screw diameter of 60 mm, providing robust performance for various applications. The machine includes a Wittmann W322-121 linear robot for enhanced automation. Consider the opportunity to buy this DEMAG ET 330 - 1450 hydraulic injection moulding machine. Contact us for further details. • Clamping unit: • Locking force: 3630 kN • Tie bar spacing (H x V): 710 x 630 mm • Platen dimensions (H x V): 1040 x 950 mm • Mold installation height: min 330 mm / max 830 mm • Opening stroke: 675 mm • Platen distance (daylight): 1505 mm • Permissible mold weight: fixed side (DS) 1200 kg; moving side (AS) 2400 kg; total 3600 kg • Ejector: stroke 200 mm; force 80 kN; retraction force 35 kN • Core pull control: yes (2 units, on ejector side/AS) • Shut-off nozzle: yes (hydraulic/pneumatic 1/1) • Injection unit 1: • Unit code: 1450-60 • Screw diameter: 60 mm • Injection pressure: 1905 bar • Stroke volume: 763 ccm • Shot weight (PS): 695 g • Screw L/D ratio: 20 • Nozzle radius: 15 mm • Max dosing stroke: 270 mm • Plasticizing flow: 41 g/s • Configuration/controls: • Armored (wear-resistant) injection unit: yes • Pneumatic ejector: yes • Process control: SPC (Yes/Yes) • Printer interface: integrated • Hot runner control: 0-zone (none) • Maintenance: • Hose replacement performed in 2017 Bjdsyg Nkwopfx Aa Nsld Additional equipment • Wittmann W322-121 CNC linear robot/removal device (included with the machine) • Travel paths: Y-axis 1600 mm, X-axis 500 mm, Z-axis 2500 mm

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 7169-2037, Plastic Injection Moulding Machine (fully electric) | Sumitomo SHI DEMAG - IntElect 100/470-340 (1000-340) Bjdpfxjygib Ne Aa Nold Clamping force [kN]: 1,000 Number of components: 1 Clamping plate width [mm]: 620 Clamping plate height [mm]: 620 Horizontal tie bar spacing [mm]: 470 Vertical tie bar spacing [mm]: 420 Centering ring diameter [mm]: 125 Minimum mould installation height [mm]: 200 Maximum mould installation height [mm]: 430 Maximum opening stroke [mm]: 380 Maximum ejector stroke [mm]: 115 Thread [M]: 16 Maximum mould weight [kg]: 780 Maximum mould weight on moving platen [kg]: 500 Screw diameter [mm]: EE1: 35 Maximum shot weight [g] PS: EE1: 139 Aggregate configuration: EE1: horizontal Equipment: Packing station with robot An inspection is possible at any time by appointment. Free loaded onto truck (Butzbach). - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Sumitomodemag | Intelect | 100-470-340