Used Diesel Power Generator for sale (47,608)

Condition: good (used), functionality: fully functional, Year of construction: 2015, operating hours: 10,740 h, machine/vehicle number: 1951 F 262, laser power: 4,000 W, travel distance X-axis: 4,500 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,020 mm, swivel angle B-axis (min.): -135 °, swivel angle B-axis (max.): 135 °, TECHNICAL DETAILS Linear axis travel paths (XYZ): 4,500 x 2,500 x 1,020 mm Rotary axis travel paths: A-axis ± 360º continuous, B-axis ± 135º C-axis: ± 10 mm Max. speed of linear axes (XYZ): 50 m/min Combined speed of linear axes: 85 m/min Max. speed of rotary axes A, B: 540 °/s Acceleration of rotary axes A, B: 60 rad/s² Laser type: CV4000 Laser Installed laser source power: 4,000 W MACHINE DETAILS Operating hours: 10,740 h Power supply: 400 V, three-phase, 50 Hz Installed cooling unit power: 53 kW / 58 kVA Extraction and dust collection system power: 15 kW / 18 kVA EQUIPMENT - OPTIMO machine - CNC control panel: P30L S/N 15/40 - 0083-01 - Prima Power remote control, serial number: 14/06 00489 - Hyfra Sigma 52-S cooling system - Donaldson DFPRO12 extraction and dust collection system - Donaldson MD2 micro-dosing system Dujdexd Um Rspfx Ag Tep The machine is powered, however, air and gas supply are required. These are not available on site. Dismantling and loading can be arranged by a company for approx. €22,000.

Condition: new, Year of construction: 2026, It is a complete painting system, consisting of the following components: 1) An oven comprising an air heater (the fuel type can be adapted to the customer’s requirements). 2) A spray painting booth equipped with an absorbent filtration system suitable for capturing even the most demanding paint applications. 3) Two parking areas, where the parts can be placed after painting or curing. Duodjyaqt Tjpfx Ag Tsp 4) A rail system allowing easy movement of the parts from one station to another. 5) A trolley used for transporting the above-mentioned parts. 6) A fully integrated steel structure, statically robust, designed to minimize the risk of failure of any component. From both a design and technical specification standpoint, the above installation constitutes a complete and autonomous electrostatic painting process.

Year of construction: 2005, operating hours: 5,870 h, condition: good (used), functionality: fully functional, POWER SYSTEM AIRTEC screw compressor Junior 5.5/385 +DF 13 Production POWER System Italy Year 2005 S/N 250911 Operating hours 5875 ( last maintenance 11/2023) Dsdpfx Aot Iq H Usg Teup Screw compressor with direct drive compact, reliable, quiet with air dryer max 13 bar Output 780 l/min Tank volume 300 l with DF 13 air dryer Motor 5.5 kW (400V, 50 Hz) Weight 382 kg CE-marked Technical specifications subject to change

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 90,899 h, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 8 mm, cutting speed: 60,000 mm/min, Automatic loading and unloading system Finn Power LU3000 included in the sale! TECHNICAL DETAILS Djdpfx Agswydh Ej Teup Sheet size: 1,500 x 3,000 mm Maximum cutting capacity (steel): 20 mm Maximum cutting capacity (stainless steel): 10 mm Maximum cutting capacity (aluminum): 8 mm Laser power: 4,000 W Cutting Capability Positioning speed: 300 m/min Acceleration: > 2 g Cutting speed: up to max. 60 m/min Precision Position deviation for drilling (XY axes): max. 0.1 mm Profile deviation: max. 0.05 mm Angular deviation: 0.03° Control system: Siemens 840D Loading and unloading unit Maximum material weight for loading: 1,000 kg MACHINE DETAILS Operating hours Total operating hours: 90,899 h EQUIPMENT Full service history by Primapower All service records and user manuals available Cooling unit included Vacuum unit included Primapower offers dismantling and loading for €7,500.

Year of construction: 2014, condition: used, functionality: fully functional, machine/vehicle number: MN 141360, Offer for Sale – FillMatic MSE 220R We are offering for sale a FillMatic MSE 220R mattress core stacker, a fully functional machine ready for immediate operation after connection. The equipment is intended for gluing mattress cores and ensures their automatic stacking at the end of the production line. Dodpexgd Hfofx Ag Tjup Location: Slovakia – Oravské Veselé 02962 Basic Technical Data: • Machine No.: MN 141360 • Machine type: SRA 200 • Power: 4.8 kW • Voltage: 400 V • Year of manufacture: 2014 Machine Description: The FillMatic MSE machine serves as a mattress core stacker. • It is designed to prevent damage to still-fresh adhesive seams during handling – an ideal solution for placement directly after the gluing section of the line. • Allows stacking to an adjustable height, with access from three sides depending on the safety guarding configuration. • The FillMatic MSE designation refers to a series of stacking or folding machines that can be combined or customized according to production requirements. This specific model is a combined version – a mattress core gluer with end-of-line stacking, making it suitable for efficient production and labor savings. The equipment is in good technical condition and ready for immediate deployment in your production process. For more details or if you are interested, please do not hesitate to contact us.

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 14,991 h, laser hours: 8,209 h, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 12 mm, workpiece weight (max.): 1,300 kg, overall weight: 10,000 kg, total length: 3,100 mm, total width: 1,600 mm, total height: 200 mm, feed length X-axis: 3,100 mm, feed length Y-axis: 1,600 mm, feed length Z-axis: 200 mm, working range: 20 mm, Equipment: cooling unit, 2D laser for cutting sheet metam Prima Power Platino Fiber 4kw. Year of Production: 2018 Hours under current 15K. Laser hours: 8200 Condition fully functional, under current in operation. More info by phone Dujdpfx Asu A S Dxjg Top

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 57,500 h, machine/vehicle number: P5.03.00.29 M1, laser hours: 57,500 h, table length: 1,500 mm, table width: 3,000 mm, Laser cutter PRIMA POWER Platino 1530 4kw Work surface: 3000x1500mm Power 4 kw Technology: Fiber Source producer : IPG Source model: YLS4000 Working hours: 57500 2 changing tables Availability: November 11, 2025 Location: Croatia Dedpewmci Ijfx Ag Tjup

Condition: used, Year of construction: 1990, MAN 125KVA diesel generator Dujdpfxsw U N Dae Ag Tjp

Condition: new, functionality: unexamined, Year of construction: 2024, machine/vehicle number: 16.41-PS0382, control type: CNC control, degree of automation: automatic, actuation type: electric, sheet thickness (max.): 8 mm, input voltage: 400 V, input current: 20 A, type of input current: three-phase, 2024 Pima Power PS 1225 Brand new Complete machine. Dusdpfx Aew Nbh Hog Tjp Machine was tipped on its side during transit and was damaged. Machine is stored in Our warehouse in California USA. Contact to set up in person inspection.

Condition: used, Little used 11.6 MW Condensing Steam Turbine Generator, TGM Kanis Turbinen GmbH, 2017 Reported to have less than 100 operating hours due to project cancellation. Includes turbine, synchronous generator, auxiliaries, and controls. Turbine Manufacturer: TGM Kanis Turbinen (Germany) Type: CT32-54 Condensing Steam Turbine Year: 2017 Live Steam Conditions: 43 bar @ 398 °C Exhaust Conditions: 0.064 bar @ 38 °C Power Output: Max continuous 11,615 kW Dsdpfx Ageyhc Tus Toup Speed: 7,200 rpm Generator Manufacturer: Elin Motoren Type: HTM290E04, synchronous generator Rating: 14,631 kVA Voltage: 11,000 V Current: 768 A Frequency: 50 Hz Enclosure: IP54 Weight: 30,600 kg Year: 2017 Auxiliaries Voith Turbo I/P Converter Type: DSG-B07143 Supply voltage: +24 VDC Input pressure: 8 bar Output pressure: 2–5 bar Sirocco Cooling System Type: 2x16 KDL-E-50-2-1850-2-1.8 Motor power: 253 kW Air flow: 29,664 m³/h (65/35 °C, 2x0.065 kPa) Water flow: 2×25 m³/h (25/29 °C, 10 kPa) Pressure: 10–15 bar Controls Turbine control system included. Turbine was intended to be fed by boiler (not included in sale) with steam production capacity of 52570 kg/hour.

Condition: good (used), Year of construction: 2009, Mueller P7505 Pure steam generator Serial: 394131-1 Duodpfow Ha I Iox Ag Tjp 2009, Stainless steam generator, 5700Kgs per hour, Allen Bradley touch screen controls, two in stock, 3Ph

Condition: good (used), Year of construction: 2016, BWT VT2000 Pure steam generator Serial: V16010 2016, BTW Vapotron VT2000, max output 2200 Kg/hour steam, with Elmo Rietschle vac pump, all mounted on stainless skid, two in stock Dedpfxjw Dykko Ag Teup

Condition: like new (used), Bettcher Model: 39 Power cleaver / slicer Stainless frame, six product chutes on turntable, with stainless circular blade for slicing, ideal for slicing salami / pepperoni etc Dodod Iq N Eepfx Ag Tsup

Condition: used, (2) Unused cryogenic nitrogen gas generating air separation units with capacity 200 mTPD combined. Each system was designed to produce a flow rate of 3,334 Nm3/hour (100 mTPD) at 115 PSIG and 0 degrees Celsius. The nitrogen produced is of the highest purity, meeting industry standards as follows: - Oxygen (O2): maximum 3 ppm v/v - Moisture (H20): maximum 3 ppm v/v - Total hydrocarbons (THC): Maximum 1 ppm Dodpfjyhc Swex Ag Teup - Carbon dioxide (CO2): Maximum 0.5 ppm v/v - Carbon monoxide (CO): Less than 1.5 ppm v/v (when incoming air CO

Condition: used, Unused methane fed 1025 kW Caterpillar 3516 STD generator set made in 1993 with only 12 hours of use in factory tests. Rated 1025kW, 1281 kVA, 1500 RPM, 50 Hz. Dujdeyhc Rmepfx Ag Tsp

Condition: used, Used 2 MW wood biomass power plant built in 2009 and running until February 2023. Plant is made up of a steam boiler that uses forest waste as fuel and a condensing steam turbine generator, electrical room, control room. Main equipment includes: - Biochamm BCV-11.0000 CA biomass boiler built in 2008 with approximately 23,665 hours of use. - Boiler feed system made in 2008 with approximately 22,549 hours of use. - Atlas Copco compressors made in 2008. - Water treatment plant made in 2008. - Hamworthy condenser made in 2008 with 22,539 hours of use. - Siemens SST-110 (TWIN AFA46 GT6) steam turbine made in 2008, with 22,539 hours of use and 563 starts. - Leroy Somer L57 54 m7/41 alternator made in 2008 with 22,539 hours of use. - EWK cooling towers made in 2008 with approximately 23,102 hours of use. Dedpfx Asyhc Irog Tjup - Fivemasa HVAC made in 2008. Available for relocation or in-situ with land and buildings.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 3,045 h, load capacity: 8,000 kg, lifting height: 3,150 mm, fuel type: diesel, mast type: simplex, construction height: 2,710 mm, fork length: 2,000 mm, drive type: Diesel, Diesel forklift Mast type: Standard Condition: Ready for use and fully operational Technical condition: Very good Sideshifter, fork positioner, Dodpfxjyr T N Ie Ag Teup 3rd valve, 4th valve, full cab,

Condition: excellent (used), Year of construction: 2018, Schneider GVXI1000KH UPS System 2018, capacity of UPS - 640 kVa, inclusions 205 batteries and 3 power modules, serviced from new by Uninterruptable Power Supplies (a Kohler company) Djdpfx Asyimpgsg Tsup

Condition: good (used), Year of construction: 2014, ABB Power Wave 33 UPS System Djdpsyil Rpsfx Ag Tsup 2014, capacity of UPS - 400 kVa, inclusions 100 batteries, serviced from new by Uninterruptable Power Supplies (a Kohler company), Two systems in stock

Condition: good (used), Year of construction: 2014, Kohler Power Wave 5000TP UPS System 2014, capacity of UPS - 25 kVa, inclusions 46 batteries, serviced from new by Uninterruptable Power Supplies (a Kohler company) Duedpfeyil Nxjx Ag Tsp

Condition: used, Year of construction: 2021, functionality: fully functional, type of input current: three-phase, working range: 6,000 mm, sheet thickness (max.): 25 mm, overall weight: 800 kg, The plasma cutting machine can cut round, square and rectangular tubes with a plasma jet. Easy programming in the office or at the machine with the help of a CAM system. Import of step files possible. The cam system creates a CNC code which is processed on the machine. Nesting manual or automatic. The machine is supplied with a plasma system from the manufacturer Hypertherm. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. Dsdpfjx S Ux Eex Ag Tjup Dragon 220 Round tube - 220 mm Square tube - 150 mm Maximum part weight - 250kg Maximum feed - 250 mm/s Raw length up to - 6000mm Drives - Servo synchronous motor Gear/Rack - hardened and ground 4 jaw chuck - 200 mm 12" touch screen display Can be seen working at our factory in Ireland

Condition: used, Year of construction: 2012, Rotary UPS System – 800 kVA –Marelli + Rotabloc Availability: In stock (2 units) Location: UK High-quality Rotary UPS System with integrated components: ✅ Marelli Generator – MJB 400 LB4 B2 ✅ Rotabloc Alternator – ALT-800 Duodpjwuyzwofx Ag Tsp ✅ Rotabloc Flywheel Accumulator – ACC-1000 Technical Specs Marelli Generator 800 kVA 400 V / 480 V – 50/60 Hz 1155 A / 962 A 1500 / 1800 rpm Weight: 2709 kg Made in Italy (2012) Rotabloc Alternator (ALT-800) 800 kVA 400 / 480 V 50 / 60 Hz Weight: 2750 kg Made in Belgium (2012) Flywheel (ACC-1000) 800 kW Drum speed: up to 3000 rpm Weight: 5250 kg Made in Belgium ✅ Advantages No batteries required – flywheel technology Immediate response during grid failure Built to ISO9001 / CE standards Reliable, compact, and scalable

Condition: good (used), Year of construction: 2013, machine/vehicle number: AKA0003767, fuel type: diesel, color: black, power: 11 kW (14.96 HP), Year of manufacture: Jun 2013 Model year: 2013 Field of application: Construction Empty weight: 857 kg Technical condition: good Visual appearance: good Damages: none Please contact Arie or Pedro for more information 5x Thermo-King 2013 Clip-on SG 3000: - ID 10757 - 14.130 hours - ID 10762 - 12.586 hours - ID 10763 - 13.047 hours Dujdpfx Agjwp R A Is Tjp - ID 10764 - 12.474 hours - ID 10767 - 13.103 hours All units have been serviced at this hours. Check our website for actual availability:

Condition: used, functionality: fully functional, power: 1.5 kW (2.04 HP), spindle mount: MK 4, drilling depth: 190 mm, rotational speed (max.): 2,020 rpm, rotational speed (min.): 75 rpm, throat depth: 340 mm, Equipment: CE marking, Max. drilling capacity (steel): Ø 35 mm Max. drilling capacity (cast iron): Ø 40 mm Max. tapping capacity: M24 Spindle taper: MT4 Spindle speed range: 75 – 2020 rpm (12 steps) Spindle auto feed: 0.12 / 0.24 / 0.40 mm/rev. Spindle stroke: 190 mm Throat depth: 340 mm Crosstable X/Y: 630 x 250 mm Worktable size: 540 × 440 mm (14 mm T-slots) Max. spindle-to-table: 605 mm Max. spindle-to-base: 1195 mm Column diameter: 140 mm Complete with: - Powered lifting worktable - Cooling pump Dsdoyplukopfx Ag Toup - Worklight - Drill protection - Digital speed display Motor power: 1.5 kW Machine (L×W×H): 90 × 66 × 230 cm Machine weight: 500 kg

Condition: excellent (used), Year of construction: 2011, operating hours: 103 h, functionality: fully functional, machine/vehicle number: C2250D5 / QSK60-G4, power: 2,000 kW (2,719.24 HP), fuel type: diesel, nominal power: 1,800 kW (2,447.32 HP), rotational speed (min.): 1,500 rpm, overall weight: 15,500 kg, type of cooling: air, color: grey, output voltage: 400 V, nominal power (apparent): 2,250 kVA, output frequency: 50 Hz, type of output current: three-phase, motor manufacturer: Stamford / CUMMINS, DUAL SWITCHING 50/60HZ 4 X CUMMINS Serial number 33184290 (QSK60-G4) 2,250 kVA ✔️ engine Cummins QSK60-G9 ✔️ alternator Stamford HCI 734F ✔️ year of manufacture 2010 Runtime hours 100> 75-91 hrs * engine Cummins QSK60-G9 Contact - Joshua Alexander -Iron Flag Global Limited Dsdpfxjx R Szuj Ag Toup The Demo project is over so we can now sell then Assets!!! Iron Flag Power Systems (US) / Iron Flag Global LIMITED (UK) is offering of four high-performance Cummins QSK60 G9 diesel generators, professionally removed from a decommissioned data centre environment for 18 years We have specialized in only full data centre decommissioning, asset recovery, and controlled removals—so equipment is handled methodically, powered down correctly, documented, and preserved for resale. The result: exceptionally stable, low-hour machines with known provenance. These units are ideally suited for data centres, hospitals, industrial plants, utilities, and other mission-critical applications where reliability is non-negotiable. Custom enclosures with all the bells and whistles! Lower than 100hrs per generators. Generator ratings (each): THERE ARE FOUR UNITS IN TOTAL -PLUS TWO CUMMINS CONTROL SYSTEM AND ADDITIONALS INCLUDED,. - Standby: 2,250 kva Total package capacity: - 2250 kVA standby - 2000 kVA prime 4 UNITS AVAILABLE. Key specifications: - Engine: Cummins QSK60-G9 - Alternator: Stamford HCI 734F - Voltage / Frequency: 400 V | 50 Hz 60hz - DUAL VOLTAGE ALTERNATOR - Year of manufacture: 2010 - Running hours: ~75 hours - Tier IIII - Condition: Excellent – load-bank tested, fully operational, complete documentation Included with the package: - PowerCommand 3201 + Digital Master Control (full synchronisation & paralleling) - Radiators, exhaust systems, silencers - Fuel systems - Full technical documentation, manuals, and service history - Indoor installation history (no harsh environmental exposure) Availability: - Immediately available – United Kingdom - On-site inspection or video inspection available - Global shipping and logistics support can be arranged These generators are a strong fit for projects demanding absolute reliability, long-term stability, and predictable performance. Having been removed by Iron Flag as part of a controlled data centre decommissioning, they offer confidence you do not get with unknown or distressed assets. Contact Joshua Alexander Iron Flag Global Limited