Used Doosan Generator for sale (322)

Condition: used, Year of construction: 2014, operating hours: 200 h, power: 360 kW (489.46 HP), total length: 4,010 mm, total width: 1,400 mm, total height: 2,110 mm, Empty weight: 3.840 kg Current frequency: 50 Hz Voltage: 400 Rcjdpfexr U Hgsx Ab Rsh

Condition: new, Year of construction: 2024, fuel type: diesel, motor manufacturer: Doosan DP222CC, General information Field of application: Construction Weights Empty weight: 6.200 kg Functional Rcodpfsthb Icex Ab Rjh Generator capacity: 1.000 kVA Other information Fuel consumption: 147 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A49D Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1130 l Transport dimensions (LxWxH): 5x2x2,5 Additional information Please contact Tijmen Pesselse, Kenny Bongers, Arjen van Dijk or DPX Power for more information

Condition: used, fuel type: diesel, Field of application: Construction Generator capacity: 818 kVA Frequency: 50 Voltage: 230 Please contact Sales Department for more information Over 80 years experience in maintenance. Expert that jointly reflects on the ideal solution for your situation. Rcsdpfoxcfgrjx Ab Rjh 1,000 hours or one-year guarantee: optimal reliability. Available 24/7. Quickservice. We can always supply a replacement generator. Wide range of stock that can be supplied immediately.

Condition: used, Year of construction: 2021, Technical details: rated capacity: 220 kVA Rcjdju U E Edopfx Ab Roh Number of working hours: 0 h type of fuel: Diesel revolutions per minute of the motor:: 1500 rpm output voltage: 400 / 50 Hz V weight of the machine ca.: 2,2 t dimensions L x W x H: 3,3 x 1,2 x 2,24 m The generator is soundproofed. - NEW -New Diesel engine: -6-cylinder -type P086TI -with battery 2x 12Volt 90 Ah Generator: -alternating current -400Volt / 50Hz -current 318 A -speed 1500 rpm -protection class IP23 -Isolation class H *

Condition: new, Year of construction: 2024, fuel type: diesel, motor manufacturer: Doosan DP180LB, General information Field of application: Construction Serial number: DV18-OOG10217012 Weights Empty weight: 5.650 kg Rsdpeu Sfncefx Ab Roch Functional Generator capacity: 710 kVA CE mark: yes Other information Fuel consumption: 103.8 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A473 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Transport dimensions (LxWxH): 4,4x1,8x2,5 Additional information Please contact Tijmen Pesselse, Kenny Bongers, Arjen van Dijk or DPX Power for more information

Condition: used, fuel type: diesel, Field of application: Construction Rsdpfx Aboxcfgls Rsch Generator capacity: 1.010 kVA Frequency: 50 Voltage: 230 Please contact Sales Department for more information Over 80 years experience in maintenance. Expert that jointly reflects on the ideal solution for your situation. 1,000 hours or one-year guarantee: optimal reliability. Available 24/7. Quickservice. We can always supply a replacement generator. Wide range of stock that can be supplied immediately.

Condition: used, Year of construction: 2023, operating hours: 1 h, fuel type: diesel, motor manufacturer: Doosan DP180LA, General information Field of application: Construction Redpfx Aow Srarjb Rsch Serial number: 20220914013 Weights Empty weight: 4.800 kg Functional Generator capacity: 630 kVA CE mark: yes Other information Fuel consumption: 94.2 Liter / Hour at 75% Load Generator: Leroy Somer TALA473E Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Transport dimensions (LxWxH): 4,35x1,8x2,35 Additional information Please contact Tijmen Pesselse, Kenny Bongers, Arjen van Dijk or DPX Power for more information Surplus unused 2023 generator. Only some visible spots of weather wear on the canopy due to outdoor storage on our previous location at Oudenbosch 2 similar units in stock

Condition: used, Year of construction: 2023, operating hours: 1 h, fuel type: diesel, motor manufacturer: Doosan DP180LB, General information Field of application: Construction Serial number: 20220914015 Weights Empty weight: 5.650 kg Functional Generator capacity: 710 kVA CE mark: yes Other information Fuel consumption: 103.8 Liter / Hour at 75% Load Generator: Leroy Somer TAL-A473 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 1000 l Transport dimensions (LxWxH): 4,4x1,8x2,5 Additional information Please contact Kenny Bongers, Tijmen Pesselse, DPX Power or Arjen van Dijk for more information Rjdpfsxbwvcox Ab Roch Surplus unused 2023 generator. Only some visible spots of weather wear on the canopy due to outdoor storage on our previous location at Oudenbosch

Condition: good (used), Year of construction: 2010, functionality: fully functional, turning diameter over cross slide: 422 mm, turning length: 750 mm, turning diameter: 422 mm, spindle bore: 76 mm, rotational speed (max.): 3,500 rpm, total height: 1,900 mm, total length: 4,480 mm, total width: 1,863 mm, turning diameter over bed slide: 765 mm, overall weight: 5,400 kg, Model: Puma 2600 Control: Fanuc i Series Year: 2010 Rsdpexrfadofx Ab Rsch Max Swing:765mm Turning Dia.: 422mm Turning Length: 750mm Spindle Speeds: 3500 RPM Spindle Bore: 76mm With: 300mm Power Chuck Swarf Conveyor Dimensions: 4480 x 1863 x 1900 Weight: 5400 Kgs

Condition: ready for operation (used), Year of construction: 2022, General Data Machine weight 6500 kg Control Unit Brand FANUC Main Drive Number of axis 3 Movement X-Axis Movement 1050 mm Y-Axis Movement 570 mm Z-Axis Movement 510 mm Tools Number of index 30 Type of tool holder ISO 40 Additional Equipment Inner Cooling: 13 bar Redsxpkqcopfx Ab Roch This 3-axis DOOSAN DNM 5700 vertical machining center was manufactured in 2022. It features a Fanuc i-Series control, a spacious 1300 x 570mm table, and a tool magazine with 30 slots. The spindle speed reaches up to 12,000 rpm, supported by inner cooling at 13 bar. Consider the opportunity to buy this DOOSAN DNM 5700 vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2017, 2017 Doosan DNM4500 VMC with Siemens 828D Control With Shopmill Table Dimension 1,000 x 450mm. Maximum Table Load 600kg. Axis Travel 'X'=800mm, 'Y'=450mm, 'Z'=510mm. Rapid Traverse 'XY'=36m/min, 'Z'=30m/min. Maximum Spindle Speed 12,000rpm (18.5kW Motor). Maximum Spindle Torque 117.8Nm. Spindle Taper BT40. 30 Position ATC. Maximum Tool Length 300mm. Maximum Tool Ø80/125mm (No Adjacent Tool). S/No. MV0090-000473 (2017/03). Rcjdpfx Aoxq Eiisb Reh With Coolant System, Chip Conveyor, Handwheel & Signal Tower. Overall Machine Dimensions L2,160 x W2,465 x H2,985mm. Weight 5,000kg.

Condition: excellent (used), Year of construction: 2014, operating hours: 28,446 h, functionality: fully functional, machine/vehicle number: MV0061-000288, feed length X-axis: 762 mm, feed length Y-axis: 516 mm, feed length Z-axis: 570 mm, travel distance X-axis: 762 mm, travel distance Y-axis: 516 mm, travel distance Z-axis: 570 mm, spindle speed (max.): 10,000 rpm, table width: 570 mm, table length: 860 mm, position of the milling head: Vertical, warranty duration: 3 months, power: 1.42 kW (1.93 HP), Equipment: documentation/manual, rotational speed infinitely variable, Doosan VC510 Twin Pallet Vertical Machining Centre with Doosan Fanuc i Series CNC Control, Table Size 2 x 860 x 570mm, Max Workpiece Height 520mm, Spindle Speed 10,000rpm, BT40 Spindle Taper, 40 Tool ATC, X Axis Travel 762mm, Y Axis Travel 516mm, Z Axis Travel 570mm, Pumps and Equipment WPB 10-1000 Hydrajet High Pressure Coolant System, Kaukan Chiller Unit, LNS Turbo HB Swarf Conveyor. S/No. MV 0061-000242 (2013) Machine Weight 9500kg, Various BT40 Back End Spindle Tools Redpfsv Du A Ajx Ab Roch Machine comes with various BT40 Tool holders

Condition: used, Year of construction: 2012, machine/vehicle number: MB0001-000031, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed length Y-axis: 6 mm, feed rate X-axis: 6 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, controller manufacturer: FANUC, controller model: 32i Model A, workpiece diameter (max.): 2,550 mm, workpiece weight (max.): 7,000 kg, total height: 4,200 mm, total length: 5,540 mm, total width: 5,930 mm, table width: 1,400 mm, table length: 1,600 mm, overall weight: 29,000 kg, spindle speed (max.): 3,000 rpm, distance table center to spindle nose: 1,750 mm, spindle motor power: 26 W, spindle nose: BT50, number of slots in tool magazine: 60, tool length: 600 mm, tool diameter: 250 mm, tool weight: 30 g, B Axis: 1 degree Control: FANUC 32i-Model A Distance from Spindle Nose to Table Top: 0 - 1500mm Distance from Spindle Nose to Table Centre: 550 - 1750mm Machine Dimensions: 5540 x 5930 x 4200mm Machine Weight: 29000kg Maximum Cutting Feedrate: 6m/minute Maximum Tool Diameter: 250mm Maximum Tool Length: 600mm Maximum Tool Weight: 30kg Maximum workpiece weight: 7000kg Rapid Feedrates: WXYZ: 6 x 12 x 12 x 12m/minute Spindle Diameter: 110mm Spindle Motor Power: 26/22kW Rcjdpfx Absxm Sxve Reh Spindle Speed: 3000rpm Swing: 2550mm Table Size: 1400 x 1600mm Tool Change Capacity: 60 Station Tool Size: BT50 Traverses XYZ: 2000 x 1500 x 1200mm W Axis: 500mm Coolant, Low Volt Light, Swarf Conveyor, Long Reach Right Angled Milling Head, Tool Length Measurement Probe, Renishaw Work Probe, Fully Enclosed machine guards.

Condition: good (used), power: 257 kW (349.42 HP), fuel type: diesel, color: orange, Year of construction: 2021, operating hours: 7,835 h, Equipment: air conditioning, Technical information Chassis type: articulated AdBlue system: Yes Make of engine: DC13 Top speed: 40 km/h Empty weight: 22.930 kg Functional Bucket capacity: 4,5 m³ CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: DWGCWLECJM10066 Rsdoxprqqopfx Ab Rjch Other information Front tyres / undercarriage remaining: 70 Rear tyres remaining : 80 Output of the auxiliary hydraulics: 266 l/min Emission level: Stage V / Tier V Delivery terms: EXW Transport dimensions (LxWxH): 9,244x3x3,66 Production country: KR Additional information Please contact Dennis van Loon, Antoon Schroder or Jeroen Rijk for more information

Condition: excellent (used), Year of construction: 2013, operating hours: 6,500 h, Model: Mynx 5400/50 Rcedpfsxq Ed Hex Ab Rsh Control: Fanuc I Series Year: 2013 Table Area: 1200 x 540mm Table Capacity: 1000 Kgs X Axis: 1020mm Y Axis: 540mm Z Travel: 530mm Spindle Taper: BT 50 Spindle Speeds: 8000 RPM 24 Station Tool Changer Through Spindle Coolant (High Pressure) Dimensions: 5300 x 3400 x 3000mm High Weight: 7000 KGS

Year of construction: 2014, condition: ready for operation (used), Control Unit Brand FANUC Movement Redpfx Abexr Rz Tj Rech X-Axis Movement 578 mm Z-Axis Movement 2033 mm Tail Stock Pinol tool taper Morse Taper MT6 Additional Equipment Stations: 12 Type: BMT75P Tooling: All tooling available, including boring bar holders, general turning tool holders, facing tools Collets: ER40 Collets This DOOSAN Puma 400LM was manufactured in 2014. A robust horizontal turning machine featuring a spindle speed of 1500 rpm and a 12 station turret BMT75P compatible with ER40 collets. It comes with a comprehensive set of tooling, including boring bar holders, general turning tool holders, and facing tools. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 400LM machine we have for sale. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 1,105 mm, Tooling package  Chip conveyor Samchully 3 chuck 400 mm with jaws Max. turning Ø: 790mm X-Axis: 352mm Z-Axis: 1105mm Spindle bore: 116.5mm Rcjdpfxswyun As Ab Reh Speedrange: 2000Rpm Spindle power: 37kW ATC / revolver: 10 Speed live tools:4000Rpm Power live tools:25kW Chip conveyor: Yes Tool eye: Yes Pinole taper: 6Mk Stroke pinole: 120mm Quill Ø: 120mm Workpiece load: 1700 Length: 4600mm Width: 2056mm Height: 2195mm Weight: 11050kg

Condition: excellent (used), Year of construction: 2012, operating hours: 37,513 h, functionality: fully functional, machine/vehicle number: MV0061-000073, feed length X-axis: 762 mm, feed length Y-axis: 516 mm, feed length Z-axis: 570 mm, travel distance X-axis: 762 mm, travel distance Y-axis: 516 mm, travel distance Z-axis: 570 mm, spindle speed (max.): 10,000 rpm, table width: 570 mm, table length: 860 mm, position of the milling head: Vertical, warranty duration: 3 months, power: 1.42 kW (1.93 HP), Equipment: documentation/manual, rotational speed infinitely variable, Doosan VC510 Twin Pallet Vertical Machining Centre with Doosan Fanuc i Series CNC Control, Table Size 2 x 860 x 570mm, Max Workpiece Height 520mm, Spindle Speed 10,000rpm, BT40 Spindle Taper, 40 Tool ATC, X Axis Travel 762mm, Y Axis Travel 516mm, Z Axis Travel 570mm, Pumps and Equipment WPB 10-1000 Hydrajet High Pressure Coolant System, Kaukan Chiller Unit, LNS Turbo HB Swarf Conveyor. S/No. MV 0061-000242 (2013) Machine Weight 9500kg, Various BT40 Back End Spindle Tools Rcjdsv Duy Ijpfx Ab Roh Machine comes with various BT40 Tool holders

Condition: used, DOOSAN S390L CNC LATHE MAKE DOOSAN, MADE IN KOREA MODEL S 390L, YEAR 2000 CONTROL FANUC 21T Redpfjxfa Ipjx Ab Roch SWING OVER BED 580 mm MAX TURNING DIA 390 mm DISTANCE BETWEEN CENTRES 800 mm CHUCK DIA 300 mm SPINDLE BORE 89 mm SPINDLE NOSE A1-8 SPINDLE SPEED 3500 RPM SPINDLE MOTOR 30 HP TURRET 12 STATIONS, RAPIDS X: 24m/min Z: 30m/min TAILSTOCK YES MACHINE DIMS L: 2800 mm W: 1880 mm H: 1800 mm MACHINE WEIGHT 5000 KGS PLUS TOOL SETTING PROBE COOLANT SYSTEM TURRET TOOLING

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 3 h, load capacity: 3,000 kg, lifting height: 4,730 mm, free lift: 1,400 mm, fuel type: gas, mast type: triplex, construction height: 2,165 mm, fork length: 1,200 mm, drive type: Treibgas, LPG forklift Rcjdpfx Abov Eff Rj Reh Mast type: Triplex Transmission: Automatic Technical condition: New Front tires type: Superelastic Front tires Condition: 80 - 100% Rear tires Type: Superelastic Rear tires Condition: 80 - 100% Description: New machine including manufacturer's warranty 18 months or 2000 operating hours, UVV inspection NEW, We will be happy to organize inexpensive transport for you. Sideshift, Sideshift integrated 3rd valve, 4th valve, rear working lights, front working lights, roof cover, windshield, full free lift, CE certificate,

Condition: ready for operation (used), Year of construction: 2012, operating hours: 37,513 h, General Data Machine weight 9500 kg Main Drive Tool taper BT40 Number of axis 3 Rcedpfx Asxg Ui Dsb Rjh Movement X-Axis Movement 762 mm Y-Axis Movement 516 mm Z-Axis Movement 570 mm Tools Number of index 40 This 3-axis DOOSAN VC 510 was manufactured in 2012. It features a twin pallet vertical machining centre with a table size of 2 x 860 x 570mm, a maximum workpiece height of 520mm, and a spindle speed of 10,000rpm. It includes a 40 tool ATC, X-axis travel of 762mm, Y-axis travel of 516mm, and Z-axis travel of 570mm. Consider the opportunity to buy this DOOSAN VC 510 vertical machining centre. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2013, operating hours: 29,083 h, functionality: fully functional, machine/vehicle number: MV 0061-000242, feed length X-axis: 762 mm, feed length Y-axis: 516 mm, feed length Z-axis: 570 mm, travel distance X-axis: 762 mm, travel distance Y-axis: 516 mm, travel distance Z-axis: 570 mm, spindle speed (max.): 10,000 rpm, table width: 570 mm, table length: 860 mm, position of the milling head: Vertical, warranty duration: 3 months, power: 1.42 kW (1.93 HP), Equipment: documentation/manual, rotational speed infinitely variable, Doosan VC510 Twin Pallet Vertical Machining Centre with Doosan Fanuc i Series CNC Control, Table Size 2 x 860 x 570mm, Max Workpiece Height 520mm, Spindle Speed 10,000rpm, BT40 Spindle Taper, 40 Tool ATC, X Axis Travel 762mm, Y Axis Travel 516mm, Z Axis Travel 570mm, Pumps and Equipment WPB 10-1000 Hydrajet High Pressure Coolant System, Kaukan Chiller Unit, LNS Turbo HB Swarf Conveyor. S/No. MV 0061-000242 (2013) Machine Weight 9500kg, Various BT40 Back End Spindle Tools Rcjdpfxsv Du Avs Ab Reh Machine comes with various BT40 Tool holders

Condition: ready for operation (used), Year of construction: 2013, operating hours: 29,083 h, General Data Machine weight 9500kg Control Unit Brand FANUC Main Drive Redpoxg Ui Rofx Ab Rech Spindle speed range 10000 Tool taper BT40 Number of axis 3 Movement X-Axis Movement 762 mm Y-Axis Movement 570 mm Z-Axis Movement 570 mm This 3-axis DOOSAN VC-510 was manufactured in 2013. It features a twin pallet vertical machining center with a table size of 2 x 860 x 570mm, a maximum workpiece height of 520mm, and a spindle speed of 10,000rpm. The machine includes a 40 tool ATC, X-axis travel of 762mm, Y-axis travel of 516mm, and Z-axis travel of 570mm. Consider the opportunity to buy this DOOSAN VC-510 vertical machining center. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2014, operating hours: 28,446 h, Control Unit Brand FANUC Movement X-Axis Movement 762 Y-Axis Movement 516 Z-Axis Movement 570 This 3-axis DOOSAN VC 510 was manufactured in 2014. It features a twin pallet vertical machining center with a table size of 2 x 860 x 570mm, a maximum workpiece height of 520mm, and a spindle speed of 10,000rpm. It includes a 40 tool ATC, X-axis travel of 762mm, Y-axis travel of 516mm, and Z-axis travel of 570mm. Consider the opportunity to buy this DOOSAN VC 510 vertical machining center. Contact us for further details regarding this machine. Application Types Rsdpfxexgv T Do Ab Rsch Milling

Year of construction: 2015, condition: ready for operation (used), General Data Measurements width 2440 mm Measurements depth 6642 mm Measurements height 2060 mm Machine weight 11000 kg Control Unit Brand FANUC Model 32i control Rcodpfx Asw Uahieb Rjh Main Drive Spindle speed range 2000 rpm Spindle motor power 26 kW (Gearbox) Additional Equipment Turret Positions: 10 station This DOOSAN Puma 400LB was manufactured in 2015. A robust horizontal turning machine featuring a FANUC 32i control, it has a chuck size of 381mm and a bar capacity of 117mm. The machine offers a maximum cutting diameter of 550mm and a length of 2093mm. With a 10 station turret and rapid feedrates of X x Z: 16 x 18m/minute, it's ideal for efficient machining. Contact us for further details regarding this machine. Application Types Turning