Used Digital Hight for sale (8,573)

Condition: like new (used), functionality: unexamined, Industrial Air-Cooled Mining Infrastructure – Available as a Package or Individually An opportunity to acquire 8 used steel data-center containers designed for high-density computing and cryptocurrency / Bitcoin mining applications. The units have previously been configured for mining computers and provide a ready-made physical infrastructure that can potentially be recommissioned for cryptocurrency mining, high-density computing, or other suitable data-processing applications. EQUIPMENT Quantity: 8 containers Type: Data center / cryptocurrency mining containers Reference: Digital Shovel Mini-Pod M300 8 Datacenter container Construction: Steel Cooling: High-volume air cooling Approximate dimensions per unit: • Width: 2.24 m • Main container depth: 2.44 m • Filter section: approximately 1.20 m additional depth • Height: 2.56 m COOLING & INFRASTRUCTURE The containers are designed around a straightforward high-volume air-cooling system. Cooling air is drawn through large filtration sections and exhausted to the outside with large fans. The mining computers themselves have are not included in the package. However, electrical wiring and connectors for connecting computing equipment are in the containers. This gives a buyer an existing infrastructure platform that can be adapted according to the requirements of the intended installation. CONDITION 7 containers are substantially complete. The containers are generally externally tidy, with some minor rust visible around the forklift lifting areas. Some doors between containers are missing as a result of the configuration of the previous installation. During the appraisal inspection, the fan blades were manually checked and found to rotate freely. 1 container is incomplete and is missing its fans and front grille assembly. One container door is also reported as damaged. Please note that no electrical testing of the wiring or fan motors was performed as part of the appraisal, so buyers should carry out their own technical inspection and testing before commissioning the equipment. Podpfx Aajz Dxcmezsgt IMPORTANT INFORMATION These are used units and are offered in their present condition. The appraisal states that production of these particular mining containers has ended. It also reports that Digital Shovel advised that the containers were assembled outside its own factory and that the manufacturer's normal warranty is therefore only available on a limited basis. Prospective purchasers are encouraged to inspect the equipment and independently verify its electrical, mechanical and operational condition before purchase.

Condition: like new (used), Year of construction: 2024, operating hours: 260 h, functionality: fully functional, cutting width (max.): 530 mm, cutting length (max.): 750 mm, total width: 2,000 mm, input current: 32 A, total height: 2,400 mm, working width: 510 mm, total length: 6,100 mm, input voltage: 400 V, space requirement height: 3,000 mm, space requirement length: 7,500 mm, space requirement width: 2,500 mm, Equipment: documentation/manual, MOTIONCUTTER® 530 – Fully Loaded 450W Digital Laser Finishing System Installed December 2024 | Only 260 Operating Hours | As-New Condition Available immediately in the UK. This is a fully equipped MOTIONCUTTER® 530 high-speed digital laser system with Automation Suite, Position Sensor, Waste Separation and Shingling Belt — essentially the complete production configuration originally supplied fully installed and trained at approx. €317,000 Installed December 2024. Only 260 total operating hours since new. This machine is barely run-in. What You’re Getting Core Machine 450W CO₂ sealed-off laser (600W guaranteed output) 510 x 510 mm working area Up to 18,000 mm/s deflection speed ±0.2 mm dynamic tolerance 20,000 hour expected laser lifetime Mistral 530 pile feeder 80–500 gsm Sheet size up to 530 x 750 mm (extendable to 1000 mm) Conveyor System Patented metal mesh belt 0–45 m/min speed Integrated cleaning station Fully Loaded Options Included ✅ Automation Suite Barcode job recognition Automated job handling Workflow XML integration 100% production control on every sheet ✅ Position Sensor On-the-fly X/Y correction to printed mark Critical for precision packaging alignment ✅ Manual Waste Separation Mechanical stripping of finished product from waste ✅ Shingling Belt High-capacity delivery system Software-controlled separation of jobs This is the configuration serious packaging converters buy. Capabilities Cut | Filigree Cut | Kiss Cut Crease | Micro Perforate | Engrave Variable Data Finishing NAMECUT® Personalisation from CSV All in one pass. No tooling. No dies. Ideal For Folding carton short runs Cartonboard packaging Personalised packaging Luxury packaging prototypes High-value sheet finishing Indigo / sheet-fed digital press finishing If you’re currently outsourcing die-cutting for short runs, this replaces that dependency overnight. Condition Installed December 2024 Only 260 hours total runtime Clean production environment Fully operational Podpfx Aajyk Ip Tjzjgt Available for inspection & test runs in the UK Reason for sale: strategic production shift. Why This Is Attractive Skip 8–10 week factory lead time Skip installation delays Skip international shipping Get a fully proven, calibrated machine Save significant capital vs buying new Serious enquiries only. Available immediately.

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, I am offering this ready-to-use DMS digital card cutter, Series 3, with extended stacking table, card cutting machine/multi-finishing capabilities, perforating and scoring functions, manufactured in 2024. Original price: €12,900. Counter reading: only 5,900 sheets. Sheet stack feeder with compressed air and double sheet detection up to format 33x67 cm. Programmable cuts. Programmable scoring or perforation. 2 double knives with 8mm strip cut, 2 side knives. Fast knife adjustment system, only 1 minute setup time. Long stacking table with motorized automatic shingle delivery. Pgodpfxsy Ufnpo Aazst Selling price: €6,720 + VAT, collection only. Location: 63450 Hanau (near Frankfurt/Main), Germany. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2004, operating hours: 24,500 h, functionality: fully functional, machine/vehicle number: 23940014, color channels: 3, resolution (max.): 320 dpi, paper width (min.): 82 mm, paper width (max.): 305 mm, paper height (max.): 914 mm, number of feeding trays: 4, total length: 2,200 mm, total width: 900 mm, total height: 1,700 mm, space requirement length: 2,360 mm, space requirement width: 1,100 mm, space requirement height: 1,900 mm, counter reading (color): 1,204,236, year of last overhaul: 2023, type of input current: AC, input current: 24 A, input voltage: 400 V, working width: 960 mm, Equipment: documentation/manual, For sale is a professional digital photo lab – complete system – ready for immediate use. Location: VISP, SWITZERLAND Highlights: - S4 Digital ICE scanner, - Original Noritsu CS-2 controller - Original EIZO ColorEdge CG21 color monitor, Psdpfxjzmh Awj Aazjgt - Software version 5.02S.003, - Original installation CD and documentation available, - Automatic film transport carrier AFC (135/240), - 9 paper magazines. Inspection and test prints are possible by appointment. Technical data: - Exposure: RGB laser system (3 lasers) - Resolution: approx. 320 dpi - Print capacity: up to approx. 1600 prints/hour (10x15 cm) - Speed: approx. 15-17 prints/minute - Supported film formats: APS, 135 and 240 negative films/slides, 120 films 4.5x6 cm, 6x6 cm, 6x7 cm - Paper widths: 89/102/127/152/203/305 mm - Image formats: JPEG, TIFF - Original dongle available - Power supply: 3N-380/400 V, 50/60 Hz - Power consumption: approx. 10 A per phase - Weight: complete with scanner unit 620 kg. - Dimensions: 1170 x 760 x 1120 mm Scope of delivery: - Noritsu QSS 3202 SD - S4 Digital ICE scanner - CS-2 controller - EIZO ColorEdge CG21 - Automatic film carrier - 7 paper magazines - Original installation CDs - Original manuals - Chemical racks: 5 x 1 l RA-4 developer starter, 6 x 10 l Enviroprint replenisher (paper developer) MP 60, 9 x 2 l RA-4BX-VR bleach-fix/regenerator - Accessories available upon request. Condition: The system comes from a well-known photo shop specializing in high-quality lab work and photos. It was used until the business closed (April 2026) and regularly serviced (most recently in 2023). It is in well-maintained condition. A total of 1,204,236 images have been printed, including 11,255 black and white and 7,367 index prints. According to the technical service of Noritsu-Veritec, the operating hours cannot be read from the system. They are estimated at 24,500 hours. The machine is being sold because of the owner's retirement and the closure of the business. Loading can be supported if required and by arrangement. Transport and installation must be arranged by the buyer. If you have any questions or are interested, please do not hesitate to contact us. Inspections are possible at any time by appointment. The machine is ideally suited for photo labs, dealers in used lab systems, spare parts dealers, universities and training centers, and collectors of professional Noritsu systems.

Condition: like new (used), functionality: fully functional, TTK FG-SYS wall-mounted digital liquid leak detection and locating panel in a lockable metal enclosure. The unit is designed for continuous monitoring and precise location of conductive liquid leaks, including water, bases and acids, when used with compatible TTK sensing cables. It is suitable for data centres, server rooms, electrical rooms, commercial buildings, industrial facilities and other critical infrastructure. The FG-SYS can identify the location of a leak to approximately 1 metre, detect cable breaks and display alarm information on the integrated LCD screen. It can monitor up to 120 sensing-cable sections across three independent circuits, with a maximum cable length of 600 metres per circuit. Main features Manufacturer: TTK Model: FG-SYS Equipment type: Digital liquid leak detection and location panel Wall-mounted version Integrated LCD display and keypad Three independent sensing circuits Up to 40 sensing-cable sections per circuit Up to 120 sensing-cable sections in total Maximum monitored cable length: 1,800 m total Leak-location accuracy: approximately ±1 m Detection of leaks and sensing-cable breaks Audible and visual alarm indication Pedszlixqopfx Aazogt 30-event alarm and fault history Eight configurable relay contacts Additional power-failure relay RS232 and RS422/RS485 communication JBUS/MODBUS connection for BMS integration Lockable metal enclosure The FG-SYS is compatible with TTK FG-EC and FG-AC digital sensing cables and can also support compatible analogue sensing cables through the appropriate interface boxes

Condition: used, Year of construction: 2016, functionality: fully functional, number of ink cartridges: 8, color channels: 8, number of print heads: 2, resolution (max.): 900 dpi, paper width (max.): 1,600 mm, number of feeding trays: 1, total length: 2,945 mm, total width: 730 mm, total height: 1,310 mm, type of input current: DC, input voltage: 230 V, Roland TrueVIS VG-640 – Specifications Brand: Roland DG Model: TrueVIS VG-640 Machine: Large-format eco-solvent printer & cutting plotter Year of manufacture: 2016 Condition: Used; print heads require thorough cleaning. Possible replacement recommended. Print width: maximum 1,600 mm Max. media width: 1,625 mm Ink: Roland TrueVIS TR2 Pgedpfoz E U Ubsx Aazjt Ink configuration: CMYKLcLmLk + M Max. print resolution: 900 dpi Print & Cut: Yes, integrated Cutting speed: 10–300 mm/sec. Cutting force: 30–500 gf Blade: Roland CAMM-1 series Media thickness (printing): maximum 1.0 mm with liner Media thickness (cutting): maximum 0.4 mm with liner / 0.22 mm without liner Heating: integrated print heater and dryer Dimensions including stand: approx. 2,945 × 730 × 1,310 mm Weight including stand: approx. 205 kg Software: Roland VersaWorks

Condition: used, This listing is for a Grant QBD1 Digital Dry Block Heater. (1 of 2 available) The unit is in full working condition and is ready for immediate release. The Grant QBD1 is a versatile laboratory dry block heater with digital temperature control and capacity for one removable, interchangeable heating block. It provides an ambient +5°C to 130°C temperature range, with ±0.1°C stability and uniformity. Dimensions are approximately 200 x 240 x 120 mm and weight is 2.2 kg. Heating blocks are interchangeable and purchased separately Transparency Report and Technical Audit: Pgsdpjxv Dvljfx Aazst Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the mos

Condition: used, Year of construction: 2023, functionality: unexamined, machine/vehicle number: SK03UT6P0097 / SK01TMFY3097, type of input current: AC, input voltage: 230 V, The 3D laser scanner Trackscan Sharp49 offered here is a mobile, tracker-based 3D scanner, manufactured in 2023, with an original price of €100,000.00. Its special feature is that it allows you to digitize components without having to attach targets to the component. This is possible because targets are already located on the housing of the laser scanner and are registered by the tracker unit. This measuring device is very suitable for the rapid digitization of large components of several meters in size, while maintaining a relatively good level of accuracy. The device was calibrated in an ISO 17025 accredited laboratory upon delivery. We recommend having the manufacturer perform a calibration upon taking possession of the device. The scan software is included in the offer. Optionally available is a touch probe for tactile point measurement on objects and a laptop. An excerpt of possible application areas: - Digitization of manufactured components for subsequent metrological evaluation, e.g. as part of initial sample tests - Digitization of objects/spare parts for subsequent reverse engineering, e.g. for the production of a spare part or design changes - Digitization of larger machine systems and room areas for planning and simulation purposes - Digitization of vehicles in the tuning sector Technical specifications: 3 laser modes Scan rate: Up to 2,600,000 measurements/s Volume accuracy: at 10.4 cubic meters: up to 0.049 mm at 28.6 cubic meters: up to 0.067 mm at 49.0 cubic meters: up to 0.089 mm Recommended component size: 0.1m - 12m Weight, tracker case fully loaded: 37 kg Weight, scanner case fully loaded: 21 kg Pgjdpfow Id E Ejx Aazet Weight, tracker unit: 6.8 kg Weight, scanner unit: 1.75 kg The device can be inspected while powered on.

Condition: like new (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 15630;15631, color channels: CMYK, number of print heads: 40, counter reading (black): 12,000,000, counter reading (color): 2,000,000, Equipment: auto duplex, documentation/manual, Only 2 (two) million clicks on color meter! 12 Million on black meter. Podpfxez E Uqce Aazsgt Excelent condition! 30 kHz printing heads, 40 printing heads, all of them in mint condition, no streaking or any demage on heads. It was under full maintenance of Canon Hungary Canon unwinder andd Hunkeler RW6 rewinder included Acelabs AceformChecker Prit Validating System on machine. Best choice for spareparts or donor.

Condition: used, Year of construction: 2023, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! For sale is a complete digital printing setup, consisting of three components, which are as follows: - Aeoon Compact Series – Digital textile printer - Aeoon PTB – Pre-treatment unit - Sanco CB160T – Tunnel dryer Psdpfx Aez Duiisazjgt TECHNICAL DETAILS Aeoon Compact Series – Digital textile printer Manufacturer: Aeoon Technologies GmbH Model: Compact Series Serial number: 20082560 AHP Year of manufacture: 2023 Weight: 1,900 kg Voltage: 3×400 VAC + N + PE Power consumption: 10.6 kVA Frequency: 50/60 Hz Country of manufacture: Austria Compliance: CE Aeoon PTB – Pre-treatment unit Manufacturer: Aeoon Technologies GmbH Model: PTB (Pre-Treatment Unit) Serial number: 30082530 Year of manufacture: 2020 Weight: 250 kg Voltage: 1×220 V + N + PE Power consumption: 0.9 kVA Frequency: 50/60 Hz Country of manufacture: Austria Compliance: CE Sanco CB160T – Tunnel dryer Manufacturer: Sanco Technology Ltd Model / Machine Type: CB160T Serial number: CB160T-210-4-120-E-0358 Year of manufacture: June 2020 Weight: 3,000 kg Voltage: 3×400 V, 3-phase + N + PE Current consumption: 100 A Frequency: 50/60 Hz Operating principle: purely electric Country of manufacture: United Kingdom Compliance: CE

Condition: ready for operation (used), Year of construction: 2011, operating hours: 7,308 h, functionality: fully functional, machine/vehicle number: KJFE012284, number of ink cartridges: 11, color channels: 11, number of print heads: 1, resolution (max.): 28,801,440 dpi, paper weight (min.): 80 g/m², paper weight (max.): 500 g/m², paper width (min.): 200 mm, paper width (max.): 1,120 mm, paper height (min.): 127 mm, paper height (max.): 15,000 mm, number of feeding trays: 3, total length: 1,864 mm, total width: 667 mm, total height: 1,218 mm, space requirement length: 1,900 mm, space requirement width: 710 mm, space requirement height: 1,250 mm, counter reading (color): 3,422, year of last overhaul: 2026, type of input current: AC, input current: 1 A, input voltage: 240 V, Equipment: raster image processor, For sale is an Epson Stylus Pro 9900 SpectroProofer with an integrated X-Rite SpectroProofer powered by X-Rite. This is a 44" wide-format, fine art, and proofing printer from a professional photo studio, in well-maintained condition and ready for immediate use, with a current service report dated July 23, 2026. The unit is ideally suited for fine art printing, photographic printing, proofing, graphics and pre-press, advertising technology, CAD/GIS, as well as high-quality poster and art prints, also for museums, galleries and professional photographers. The model uses the proven Epson UltraChrome HDR-11 color pigment ink system and achieves a print resolution of up to 2880x1440 dpi. It handles media up to 44 inches (111.8 cm) wide and paper thicknesses up to 1.5 mm. The printer is ideal for photographers, print service providers, artists, advertising technology or fine art printing. A total of only 3,422 prints have been made. The printer is being sold due to the business owner's retirement. Technical data: - Manufacturer: Epson - Model: Stylus Pro 9900 + SpectroProofer (X-Rite) - Print width: 44" (111.8 cm) - Printing technology: Epson MicroPiezo TFP - Ink system: UltraChrome HDR (11 colors) - Maximum resolution: 2880x1440 dpi - Roll and single sheet feeder - LAN network connection (cables for connections available) - Weight: approx. 116 kg Podpfxoznmilo Aazjgt Scope of delivery: - Epson Stylus Pro 9900 + SpectroProofer (X-Rite) - Roll holder - Catch tray - Power cable - Available accessories (paper rolls of any quality, canvas rolls) - Partially used ink cartridges (depending on the fill level) - 11 ink cartridges (see photos) in original packaging, unopened Condition: The printer is in good condition and was operated only by professional staff in a canton-wide recognized photo store and regularly serviced, most recently in July 2026 (service record available). The operational condition can be inspected on-site at any time by appointment, and a function test can be performed. Location: Visp, SWITZERLAND Loading: Loading can be assisted upon agreement. Worldwide transport is possible, but must be organized by the buyer. Local pick-up is preferred. Private sale. No guarantee or return. Price: 3,250 Euros

Condition: excellent (used), Year of construction: 2018, operating hours: 13,613 h, functionality: fully functional, machine/vehicle number: V98BB208, number of print heads: 8, resolution (max.): 1,800 dpi, paper width (max.): 730 mm, paper height (max.): 153 mm, total length: 2,203 mm, total width: 1,572 mm, total height: 1,293 mm, space requirement length: 2,803 mm, space requirement width: 2,580 mm, space requirement height: 1,300 mm, year of last overhaul: 2025, type of input current: AC, input voltage: 230 V, Selling a well-maintained Mimaki UJF-7151 plusII UV-LED flatbed printer, manufactured in 2018, in very good condition. The machine is fully functional and can be inspected while in operation by arrangement, including a test print. Ideal for direct printing on promotional items, signage, packaging, acrylic, wood, metal, glass, leather, plastic, and much more. TECHNICAL DATA - Printing technology: UV-LED inkjet with piezo print heads - Resolution: 600 / 900 / 1,200 / 1,800 dpi - Max. printing area: 710 x 510 mm - Max. media size: 730 x 530 mm - Max. material height: 153 mm - Max. material weight: 30 kg - Available colors: C, M, Y, K, Light Cyan, Light Magenta, White, Clear Varnish, Primer - Interfaces: Ethernet, USB 2.0 - Dimensions (W x D x H): approx. 220 x 157 x 129 cm - Weight: approx. 330 kg including base - Printed area: 3105 m² - Operating hours: 13613 EQUIPMENT - Ink coverage: 92% - Accessories: Vacuum table ADVANTAGES - Exceptionally sharp prints up to 1,800 dpi - White and clear varnish for dark and transparent materials, as well as varnish and relief effects Pgjdpfx Aaez Ek Nzezjt - Up to 153 mm height, allowing boxes, housings, and objects to be printed - Instant drying through UV curing - Robust Mimaki industrial quality PICKUP / SHIPPING Location: 47533, Kleve Pickup only. The machine weighs approximately 330 kg, so please arrange for suitable transport and lifting equipment or a pallet jack. If you have any questions, please contact me. Please refrain from sending unserious inquiries or trade offers.

Condition: good (used), Year of construction: 2014, The Agfa Anapurna H2500i LED is a high-speed, heavy-duty, wide-format hybrid UV LED-curable inkjet printer designed to handle both rigid boards and roll-to-roll flexible substrates Colour Confirguration: 6 colours + W In Production, demo possible RIP: non available Western Europe Psdpfsz Dw Axsx Aazsgt For further technical details refer to enclosed datda sheet. Maximum Print Width: 250 cm (8.2 ft) | Up to 247 cm (8.1 ft) for full borderless printing Rigid Media Length: Max 140 cm (4.59 ft) with one standard roller table. This extends up to 320 cm (10.5 ft) when using the default front and rear media extension tables Productivity & ThroughputDraft Mode: Up to 115 m²/h (1,238 ft²/h)Express Mode: 70 – 78 m²/hProduction Mode: 35 – 57 m²/hStandard Quality Mode: 21 – 31 m²/hHigh-Quality Mode: 16 – 17 m²/h

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 2NT01193, total length: 1,800 mm, total width: 1,000 mm, total height: 1,200 mm, input voltage: 220 V, product width (max.): 330 mm, Equipment: documentation/manual, double-sided, Canon imagePRESS'es C710, C650 and C910 – a reliable and high-performance digital production presses ideal for commercial print shops, in-house print rooms, and professional graphic environments. Features Outstanding image quality Handles a wide range of media types and weights Suitable for brochures, flyers, booklets, marketing materials, and short-run production User-friendly touchscreen interface Condition Fully operational and well maintained, in excellent condition. The machines always serviced by Canon engineer with genuine parts, service history available if required Pgjdeurbwxepfx Aazst Paper trays standard: 3 x sheet cassettes, Stack Bypass-C1: Multi-purpose tray/ for Long sheet) POD Deck Lite D: (A4/ A3/SRA3) Fiery Print Controller on board x 1 Prisma Sync x 2 Paper Size Length: 148 mm – 487.7 mm Width: 98.4 mm – 330.2 mm Up to 350gsm Duplex Colour Image Scanner with automatic document feeder Power Source 220-240 V Measurements Height 120. With touch control panel 145 Width 180 Depth 100 Machines always serviced by Canon. Discount offered if all 3 machines are bought. Available for inspection OPEN TO OFFERS

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Equipment: documentation/manual, Digital printing machine Durst Description: 40 meters per minute 7 colors – Cyan, Magenta, Yellow, Black, Orange, Violet, and White Unwinder for roll unit Web guide and splicing table Corona unit – overhauled in 2026 UV drying unit – overhauled in 2026 Inspection table Pjdsz Hay Sspfx Aazjgt Roll winder Ink supply unit Automatic cleaning system Operation of the main monitor via touchscreen Insetting process possible PMS web GUI data processing Low-migration ink Chiller

Condition: good (used), Year of construction: 2016, functionality: fully functional, Oce Arizona 460 GT Year of manufacture: 2015 (installed in 2016) Color: 4 colors + 2 white Resolution: 1440 dpi Speed: up to 34 m²/h Variodot: 6 pl - 42 pl Format: 2.5 m x 1.25 m Psdpfx Aaezzpf Aezegt Roll option: 2.2 m In excellent condition, complete with Onyx RIP software.

Condition: good (used), Year of construction: 2018, functionality: fully functional, Oce Arizona 1260 GT Podpfx Aoz Ebryeazogt Color: 6 C (CMYK (white + varnish)) Format: 2.5 m x 1.25 m Resolution: 6 pl Varodot, 1440 dpi Speed: up to 34 m²/h New options: Registration pins Self-cleaning printheads New user GUI (interface) Optional: - ONYX THRIS RIP - Roll option - Delivery - Installation - Training

Condition: excellent (used), Year of construction: 2018, operating hours: 3,000 h, The Agfa Jeti Tauro H2500 LED is a 2.54 m hybrid flatbed/roll-to-roll UV LED inkjet printer. Colour configuration: CMYK Lc Lm + White + primer (6c W4 P2). Under Premium care service contract. Perfect working conditions. Only 2.900 hours of print. Pgsdpfx Ajz D I R Tsazet Full automation - Double robot configuration The high-performance UV LED printer for demanding large-format production. 2.54 m print width Up to 275 m²/h UV LED technology Hybrid flatbed + roll-to-roll Up to 1,200 dpi CMYK + Light Cyan + Light Magenta Optional White & Primer Print on rigid and flexible media Designed for high-volume, industrial production One machine. Endless possibilities. From signage and displays to POS, retail graphics, décor and banners, the Jeti Tauro H2500 LED delivers high-quality results with exceptional productivity. For further technical specifications please refer to attached brochure.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 204778-553, total width: 3,200 mm, type of input current: three-phase, input current: 19 A, input voltage: 400 V, Equipment: documentation/manual, For Sale: Klieverik Calendar We are offering our Klieverik calendar machine for sale. The machine is fully operational and available for inspection. Pgsdpfx Aozrgfnoazot Reliable calendar machine from Klieverik, the Netherlands. Industrial quality with specifications of approximately 10 kW power, 400V, and 50/60 Hz operation. Well-maintained and fully functional.

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, color channels: CMYK, number of print heads: 2, We are offering this used Mimaki TxF300-75 DTF roll-to-roll printing machine and the accompanying Adkins dryer with powdering unit. Year of manufacture: 2024 Condition: Ready for use / currently still in operation. Otherwise, please see the photos. We also have other machines of the same design available. Pgodpfxozn Iqqe Aazot If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: repair required (used), Year of construction: 2018, functionality: not functional, machine/vehicle number: SG65Q11001, Everything is still quiet. Pedsy Siqijpfx Aazogt

Condition: excellent (used), Year of construction: 2013, The EFI VUTEk GS3250 is a 3.2-meter, high-production UV hybrid flatbed/roll-to-roll printer. It is engineered to seamlessly bridge the gap between high-margin, photo-realistic point-of-purchase (POP) graphics and heavy-duty, fast-turnaround commercial print runs Eight colours + White Western Europe Installation possible upon reqiest Podpfxoz Dh N Aj Aazogt In production, demo possible Official documentation outlines the comprehensive technical specifications and facility requirements for the VUTEk GS3250 system are enclosed

Condition: repair required (used), Year of construction: 2009, operating hours: 4,131 h, functionality: limited functionality, number of ink cartridges: 8, color channels: 8, number of print heads: 1, We are selling our Epson printer, which is no longer needed. It has been stored in our warehouse for a few years and was used to print photos in the garage. The print head is likely defective, and it does not recognize the cartridges on the left side, indicating that they are empty, even though they are full. Includes software and automatic paper roll feed. I did not connect it to the network, so I can only provide the number of pages printed: 4131 pages. Sold as is, with defects. We didn't use it much because we mostly print on our plotter. Inspection is possible. Pgodpfx Aaezi Svmozet

Condition: used, Year of construction: 2011, machine/vehicle number: 1537111, type of input current: three-phase, input current: 30 A, input voltage: 400 V, EFI VUTEk GS3200 UV roll-to-roll printer, year of construction 2012, including two extension tables. Pjdpfxezvu Nie Aazegt Sold directly by the owner: a Belgian manufacturer of visual communication, founded in 1832 and part of an international group, ISO 9001 and ISO 14001 certified. This printer comes from our own production floor. It is for sale because our focus is shifting towards total solutions in visual communication, not because there is anything wrong with the machine. MACHINE - EFI VUTEk GS3200 UV printer - Printing width up to 3.2 m - Year of construction 2012 - Supplied with 2 extension tables CONDITION Used, from our own production. Sold as seen, without factory warranty. We will tell you the exact condition and answer every technical question before you decide. Additional photos and technical details available on request. PRACTICAL - Ex works, collection in Olen, Belgium - Dismantling, transport and installation can be arranged at day rate - Business sale with invoice - Payment before collection Get in touch through this listing for additional photos, exact specifications or a viewing appointment.

Condition: excellent (used), Year of construction: 2021, operating hours: 9,706 h, functionality: fully functional, color channels: CMYK + White + Lacquer + Primer, counter reading (color): 2,440, Equipment: raster image processor, We offer this very well-maintained Mimaki UJF-6042 MkIIe digital printing machine, manufactured in 2021. Manufacturer: Mimaki Model: UJF-6042 MkIIe (latest generation) Year of manufacture: 2021 Condition: very good (used for a total of 2440 m²) Configuration: CMYK + white + white + varnish + primer (LS120) Software: RasterLink 7 RIP software included Type: digital printing machine Pgsdpfxsz Dxzps Aazet The price includes the original MIMAKI floor stand. The machine has been regularly serviced and was continuously connected to the power grid to ensure proper execution of automatic maintenance and circulation cycles (to prevent nozzle clogging). If you have any further questions or require additional information, please feel free to send us a message or call us. The listing was translated automatically. Translation errors are possible.