Used Digital Label for sale (8,468)

Year of construction: 2023, condition: as good as new (ex-display), Feeder Media width min. 100 mm max. 216 mm Page size min. 76.2 mm max. 254 mm * Max. 1200 mm in sequential mode Media diameter max. 254 mm Core max. 76 mm Media weight max. 10 kg Laminator Media width Min. 80 mm Max. 195 mm Media size max. length 200 m or 210 mm Outer diameter Inner diameter max. 76 mm Max. outer media diameter: 200 mm max. inside: 25.4 mm Media weight max. 8 kg Cutter System gate cut with cutting plotter Motor Digital servo motor Cutting force 20 - 300 gf in 31 steps Max. Cutting area No R. mark: 203 mm x 300 mm R. mark: 186 mm x 1200 mm Max. Cutting speed 600 mm / s General data Max. Media diameter separating unit 220 mm Core: 25.4 mm Number of slitters 3 Lodpfxot D E Aio Afasrh Interface USB2.0 (High Speed) Network (Ethernet 10BASE-T / 10BASE-TX) Display LCD with 128 x 64 pt Power source AC100-120V, AC200-240V 50/60Hz (automatic change) Max. Power consumption 170 VA Operating conditions 10 - 35°C / 35-75% relative humidity (non-condensing) Operating conditions for guaranteed accuracy 16 - 35°C / 35-70% relative room humidity (non-condensing) Dimensions (WxHxD) approx. 1904 mm x 994 mm x 1297 mm Weight approx. 151 kg

Condition: good (used), functionality: fully functional, Digital Finishing System iTech AXXIS (Laminating, Cutting, and Roll Rewinding System) Contour cutting via vector cutting (plotter/drag knife) and SmartMark opto-electronic line sensor for mark detection Data transfer via HighSpeed USB or Ethernet Cutting accuracy: 0.25mm or 0.1% overall Cutting force: 10 to 550g Curve cutting Test cut function Pause and reset functions Front panel with keyboard operation Registration accuracy: 0.1mm Feed speed: 0 - 50mm/sec Cutting speed: 1,320mm/sec Maximum label length: 345mm Min./Max. roll width: 100mm / 210mm or 230mm Max. roll outer diameter: 275mm Software: Allen DirectCut (CorelDraw plug-in), USB cable included Machine dimensions: 790 x 990 x 640mm (L x W x H) Ljdeyh Ukpspfx Afasrh Weight: approx. 90kg

Condition: excellent (used), Year of construction: 2024, machine/vehicle number: VP320C46009320240131V002, Max. media roller: 450 mm Lrsdpfx Afevf Inboajh Max. media width: 320 mm Max. label roller: 310 mm max. label length: 1200 mm Max. media thicker: 0.3 mm Technical data Speed: max. 7.3 m/min Printing process: CMYK LED toner technology Print processor: 933 MHz, 2 GB, RAM 2G; HDD 40 G Warm-up time: under 28 seconds Interface: TCP/IP Web width: min. 210 mm, max. 330 mm Print width: max. 304 mm Print length: max. 1,200 mm Roll diameter: max. 450 mm (unwinding and rewinding) Roll weight: max. 47.2 kg (unwinding and rewinding) Printing material: 30 - 350 g/m² Resolution: 1200 x 2400 dpi Toner capacity: CMY: 18,500 pages A4 at 5% coverage K: 26,000 pages A4 at 5% coverage Fixing: 480,000 pages A4 Service life Dimensions: 1400 x 850 x 1600 mm Weight: 350 kg Ambient: Temperature 20°C - 24°C, relative humidity 45 – 55% Connection value: 220 – 240 V AC, 50 – 60 Hz, 3.8 KW

Condition: good (used), Year of construction: 2018, Xeikon CX500 Digital Label Press – (Roll-to-roll digital dry-toner press) Year of Manufacture: 2018 Print Media Handling Ljdpfex Hh A Hsx Afasrh • Roll-to-roll configuration with variable repeat length • Print width: 508 mm • Print speed: 20 m/min (65.6 ft/min), depending on substrate grammage • Media weight: 40 – 350 gsm (27 lb text to 130 lb cover) Print Engine • 5-color dry toner technology • Resolution: 1200 dpi • Color configuration: o CMYK o Single-pass opaque white o Gamut extension o Custom spot colors _____ GM DC5V8-BX Converting & Finishing System Year of Manufacture: 2011 Web Specifications • Web width: 200 – 520 mm • Substrate thickness: 20 – 200 microns • Machine speed (semi-rotary): up to 55 m/min Main Units & Features • Unwind unit (max. diameter: 700 mm) • BST web guide with splice table • Servo-controlled flexo printing unit • UV curing unit • Laminating unit • Vetaphone corona treater • Die-cutting unit o Plate size: 50.8 mm – 520.7 mm o Magnetic cylinder: Z200 • Waste rewinder (diameter: 500 mm) • Slitting unit • Two rewind stations • Pre-installed buffer system for Xeikon digital press • Touch-screen operator control panel _____ SYSTEM BENEFITS When combined, the Xeikon digital press and GM DC5V8-BX finishing line form a complete end-to-end label production workflow, enabling: • High-quality digital printing • Inline or nearline converting • Flexo varnish, lamination, die-cutting, slitting, rewinding • Fast job changeovers • Efficient production of short, medium, and long runs Ideal for label converters seeking a compact, flexible, and fully integrated solution. _____ CONDITION OF THE MACHINES • Both machines are in good used condition • Fully operational prior to decommissioning • Offered as part of a combined setup for optimal productivity _____

Year of construction: 2022, condition: like new (used), New digital label printing machine Valloy Bizpress 13R. The equipment was only used for demonstration purposes. Toner-based LED printing technology Color configuration: CMYK Printing speed: 7.3 m/min Printing resolution: 1200x1200 dpi Media width: 210 - 330 mm Printing width up to 304 mm Media thickness: 50 - 350 microns (30 - 350 gsm) Media type: paper, PP, PVC, PE Eye-mark sensor for pre-printed or cut media Unwinder & rewinder max. roll diameter 450 mm Size: 1400x850x1000 mm Features: Pneumatic expandable unwinder and rewinder Web guiding system with splice table Media cooling system High voltage anti-static ionizer Electric tension control via magnetic powder brake Lrjdpfxswwg N To Afaoh Machine inspection and testing are welcome. Installation and training can be provided for an additional fee.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Digicon series 2 2010 model specifications: Ljdpfxoyl Alfo Afaorh • Web Width: 330 mm • Flexo Varnishing Unit: 1 unit • Rotary Die-Cutting Unit: Equipped with a K&B GapMaster system • Maximum Unwind Roll Diameter: 700 mm • Running Speed: Up to 36 meters per minute at a 300 mm repeat length • Plate Cylinder Flexo Sizes: • Minimum: 10 inches (254 mm) • Maximum: 24 inches (609 mm) • Maximum Rewind Diameter (Single Spindle): 600 - Rotary and flat blade spitting

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: A7X5021000012, number of ink cartridges: 4, color channels: CMYK, resolution (max.): 600 dpi, space requirement width: 330 mm, counter reading (color): 503,000, For sale: a Konica Minolta C71cf roll-to-roll color label printer in good condition. It prints on various materials: vellum, coated paper, PP, PE, wine label stock, and PVC. The printer has only printed about 500 km. Currently connected and operational. We can also offer finishing equipment: Scorpio Plus SCR35PI, or Vorey VD320 Lrodpfx Aoxuid Sofajh

Year of construction: 2017, condition: good (used), Offer for Sale: DOMINO N610 Digital Printing Press 🎨🖨️ We are pleased to present a high-performance DOMINO N610 digital printing press for sale. This advanced printing solution is ideal for high-quality, fast, and efficient label printing. Below, you'll find the main technical specifications and features: 🛠️ Technical Specifications: - Age: 2017 - Print Width: Up to 333 mm (13.1 inches) - Printing Speed: Up to 75 m/min (246 ft/min) 🚀 - Resolution: 600 x 600 dpi for sharp and vibrant prints 📸 - Color Options: Up to 7 colors, including white ink for outstanding color coverage 🌈 - Substrates: Supports a wide range of substrates, including paper, PET, PP, and PE ✔️ - Ink Type: UV curable inks, ensuring durability and scratch resistance 💧🛡️ Lrodpfeutbutsx Afash - Drying System: Integrated UV curing system for instant drying and handling 🌞 🔧 Additional features: - Advanced Workflow Integration: Seamlessly integrates with existing workflows for optimized production efficiency 🔄 - Color Control System: Ensures consistent color quality across different jobs and substrates 🎨✅ - Remote Diagnostics & Support: Access to remote diagnostics for quick troubleshooting and minimal downtime 📞🔍 - Environmental Compliance: Energy-efficient operation with eco-friendly inks 🌍♻️

Condition: used, Year of construction: 2020, operating hours: 6,162 h, machine/vehicle number: 958-167, Application version: 6.9.3.9, PLC version 20200618.957, with control PC, flat panel display, handheld scanner, keyboard and mouse (without add-on monitor) Lrjdpfx Afoyidl Esaoh

Condition: used, Year of construction: 2020, machine/vehicle number: 958-168, Operating hours: approx. 6,000, currently not in operation, print heads have been preserved, application version: 6.9.3.9, PLC version: 20200618.957, includes control PC, flat screen monitor, hand scanner, keyboard, and mouse. Lrodpfx Afeyidl Soajh

Condition: used, Year of construction: 2021, operating hours: 4,691 h, machine/vehicle number: 964-005, Application version: 7.80.4.1, PLC version 20230531.96, with SUPERMICRO control PC, flat screen, handheld scanner, keyboard and mouse (without tablet PC and monitor assembly) Lrodpeyidlxsfx Afash

Condition: good (used), Busch Model B Label Puncher Professional machine made in Germany. Busch is a leader in the production of pallet turners and pushers. Very good condition, ready for production. Lredpfxoyi Daxe Afash The machine is equipped with a quick-action hydraulic unit. Safety guards, die-cutting clamps with micro-adjustment in every plane, and additional rotational adjustment. Quick and convenient die-cutting leveling. Adjustable feed table in every plane. Long delivery tail. Maximum format 230x230mm Weight 850kg 400V power supply The machine can be used to produce labels, calendars, sample cards, etc.

Year of construction: 2013, condition: good (used), LINK LABEL ISH 330 Cross Cutter → Year of manufacture: 2013 This machine is designed for precise cross-cutting of both printed and unprinted materials and is particularly well-suited for short production runs, variable cut lengths, and processing transparent substrates. Technical Specifications Unwinding System → Integrated unwind unit → Loop control for stable web tension → Roll end sensor included Maximum Roll Diameter → 550 mm Maximum Web Width → 330 mm Cutting Length → Variable, programmable via touch screen → Skip function included → Intermediate cut programmable from 0.10 mm to 50.00 mm Maximum Speed → Up to 500 cuts per minute Drive and Control → Computer-controlled drive system → Touch screen operation Material Handling → Suitable for transparent materials → Suitable for printed and unprinted materials → Optical sensor for register control Delivery System → Delivery conveyor for shingled output → Pulse separation system for reliable product separation Infeed and Web Control → Pneumatic pressure rollers → Web tension control via integrated vacuum system → Vacuum pump included Electrical and Air Requirements Lrodjycv Eyspfx Afajh Power Supply → 220 V → 10 A Compressed Air → Minimum 6 bar Dimensions and Weight Overall Dimensions (L x W x H) → 1,980 x 900 x 1,038 mm Machine Weight → Approx. 250 kg Why This Machine? The ISH 330 Cross Cutter stands out with its high cutting precision, flexible length programming, and superior web control. Its optical register system and vacuum-controlled web tension ensure reliable, consistent results even at high speeds and when working with challenging substrates such as transparent films. With its compact footprint and intuitive touch screen operation, it is the ideal choice for efficient finishing in modern label production environments.

Condition: used, Year of construction: 2015, functionality: limited functionality, machine/vehicle number: 931-531, number of ink cartridges: 5, number of print heads: 8, resolution (max.): 630 dpi, paper width (max.): 500 mm, paper height (max.): 400 mm, total length: 2,900 mm, total width: 2,020 mm, total height: 1,650 mm, type of input current: three-phase, input current: 16 A, input voltage: 400 V, We offer a used, fully operational Kornit Storm 2 DTG printer – Year of manufacture: 2015. The machine can be viewed in person at our facility in Mogliano Veneto, located in the industrial area just a few minutes from Marcon, Treviso, and Venice. *The printer is functional* and equipped with used printheads, which still deliver excellent print quality. Please note that the yellow printhead and only one of the four white printheads require replacement. We are selling it to purchase the next model. The machine was acquired used five years ago and was in full operation until September 28, when two printheads unfortunately stopped functioning correctly. Regular maintenance and cleaning have been carried out, but the machine has not been used in production since October. If you do not already own a compressor with the specifications required for the machine's proper operation, we can include one as part of the sale. You are welcome to visit and inspect the machine in person. Alternatively, we can send a video or conduct a live demonstration of the printer in operation. TECHNICAL SPECIFICATIONS - Print Area: Up to 40 x 50 cm - Compatible Materials: Cotton, polyester, blends, lycra, viscose, silk, leather, denim, linen, wool, and others - Dimensions: 290 x 202 x 165 cm (114 x 80 x 65 in) - Weight: approx. 1705 kg (3759 lbs) - Power requirements: 400/208 VAC, 50/60 Hz, three-phase - Compressed air pressure: 6–8 bar (90–116 psi) - Operating conditions: Temperature 18°C–30°C (64.4°F–86°F), humidity 45%–65% MAIN FEATURES - Printheads: Equipped with 8 industrial Spectra Piezo electric printheads, upgradeable to 12 or 16. Capable of supporting various materials and printing on raised elements (e.g., buttons, zippers). - Ink System: Utilizes Kornit’s eco-friendly NeoPigment ink, biodegradable and compatible with a wide range of fabrics. Includes a bulk ink system for efficient, continuous operation. - Production Speed: Prints up to 120 light-colored garments and 65 dark garments per hour. - Resolution: Maximum print resolution of 630 dpi. - Maintenance: Automated maintenance system for long-term reliability, with routine annual checkups, ink replacement, and software updates. ADDITIONAL FEATURES - Eco-friendly process: Meets stringent industrial standards, making it suitable for the safe production of children’s apparel. - Integrated Systems: Built-in humidity and ink recirculation systems enhance reliability and reduce operating costs. If you have any questions or require further information, please feel free to send us a message or call. TECHNICAL NOTES - Operating voltage: 230/400 V AC - Rated current: 16 A - Frequency: 50 Hz - Operating voltage: 200 V AC Ljdjygxicopfx Afasrh - Rated current: 16 A - Frequency: 60 Hz - Year of manufacture: 2015

Condition: good (used), Used Eurotherm Drives 590 Digital 150HP /110KW DC Drive. Eurotherm Drives 590 Digital series Model: Supply Voltage: 500 VAC, 222AMPS, 3 PH, 50/60 Hz Output Rating: 150HP Armature Output: 460 VDC, 270AMPS Lrodpodl Amzsfx Afash Field Supply Volts: 500 VAC, 1PH Field Output Current: 10 AMPS DC Auxiliary Supply: 115 VAC, 1PH, 4 AMPS

Condition: new, PRICE: 1900 EUR Spiral dough mixer Container capacity (capacity): 60 liters Spiral mixers are intended for professional use in the field of bakery and catering They are used for the preparation of primary dough, but can also be used for the preparation of other types of products, replacing manual work with a mechanical system In this way, it is possible to produce larger quantities of dough continuously They consist of a bowl for ingredients and a mixing tool (spiral) They have a digital control panel with a display, two independent electric motors with two speeds and counter directions that move the vessel and the spiral, as well as a built-in timer Specification of Spiral Mixer single phase Bowl Capacity: 60 liters Electric Power: 3kW Machine Size: 840x480x1000mm Ledpfxjx U Efbj Afajrh

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: SK03UT6P0097 / SK01TMFY3097, type of input current: AC, input voltage: 230 V, The 3D laser scanner Trackscan Sharp49 offered here is a mobile, tracker-based 3D scanner, year of manufacture 2023, with a new price of €100,000. The exceptional feature of this device is its ability to digitalize components without the need to attach targets directly onto the part. This is made possible by targets integrated into the scanner housing, which are detected by the tracking unit. This measuring instrument is ideally suited for rapid digitalization of large components—spanning several meters—while maintaining comparatively high accuracy. The device was calibrated in an ISO 17025 accredited laboratory. The offer includes the scanning software. Optionally available: a touch probe for contact point measurement on objects and a laptop. Sample application areas include: - Digitalization of manufactured parts for subsequent metrological evaluation, such as first article inspections - Digitalization of objects/spare parts for downstream reverse engineering, for example, to manufacture replacement parts or implement design modifications - Digitalization of larger machinery and plant areas for planning and simulation purposes - Digitalization of vehicles for tuning applications Technical specifications: - 3 laser modes - Scan rate: up to 2,600,000 measurements per second - Volumetric accuracy: * At 10.4 m³: up to 0.049 mm * At 28.6 m³: up to 0.067 mm * At 49.0 m³: up to 0.089 mm - Recommended component size: 0.1 m – 12 m - Complete tracker case weight: 37 kg - Complete scanner case weight: 21 kg - Tracker unit weight: 6.8 kg - Scanner unit weight: 1.75 kg Lredsw Id E Eepfx Afajh The device is fully operational and can be inspected under power.

Condition: new, Year of construction: 2024, The LF-100 label finishing system. is a professional, compact all-in-one desktop finishing system that enables the die-cutting and laminating of labels in a single pass. labels in a single pass. The system features a high-precision, digital die-cutting digital die-cutter that can produce professional labels in virtually all shapes and sizes. Optionally, a laminate can be applied to give the labels a labels with a high-gloss and durable surface. durable surface. The LF-100 is designed for a width of 127 mm (5"). designed. The optical camera is designed that it reads only one black mark for each cut layout, which optimizes cutting speed and synchronization. - Media path with ultrasonic sensor to ensure precise media guidance and media guidance and speed for precise precise punching. - Cost-effective, multi-edged blades extend the cutting time and need to be Lrsdpfx Afeuvigceash need to be replaced less frequently.

Condition: good (used), Year of construction: 2011, Offered Equipment • Manufacturer / Model: LINK LABEL LLR-320-6VR • Type: 6-color letterpress printing press with inline converting • Web width: 320 mm Configuration: • 6 × Letterpress printing units (each with UV dryer) • 1 × Flexo unit (for varnish or additional spot color) • 1 × Rotary die-cutting unit • Unwinder and rewinder • UV power supply & controller • 2nd pass scanner (web inspection system) _____ Advantages of this press ✅ Robust and proven technology – LINK LABEL presses are renowned for their solid construction and long-term reliability. ✅ Inline production – printing, varnishing, and die-cutting in a single pass saves time and reduces waste. ✅ High-quality UV curing – consistent print quality with stable color and sharp detail. ✅ Versatile application range – suitable for self-adhesive labels, tags, and packaging up to 320 mm web width. ✅ Cost-effective investment – an attractive alternative to newer systems, offering an excellent balance between performance and price. _____ Lodpfsw Tc U Njx Afaorh Condition & Availability • Currently powered and in production • Inspection and test runs possible • Immediately available _____

Condition: like new (used), Year of construction: 2021, operating hours: 300 h, functionality: fully functional, product width (max.): 330 mm, working width: 330 mm, EFLEX 330 2S (in operation since 2021, only on a partial shift basis; fewer than 300 printing hours): Selling price: €350,000 + Accessories €20,000 Prices are EXW Košťany nad Turcom, Slovakia, and exclude VAT, (de)installation, and commissioning. The machine has been regularly maintained and is ready for sampling, customer testing, or production. 8-Colour UV Flexo Printing Press: Model eFlex 330-2 S - Full Servo Drive Technology - eFLEX 330 – 2 S with helical gear transmission - 8 Colours + Extended Die Module - 2 x Die Stations + Sheeter DRYER OPTIONS - 8 x IR Lamp & Hot Air Drying Systems - 8 x UV Lamp System + Chill Rolls & Chiller OTHER INCLUDED OPTIONS - Pre-register - Auto register - 2nd Pass Capability - Upgrade: Unwind Roll Lift - Corona Treatment - Single Sided (2 kW) - Web Cleaner (Double Sided) with anti-static - Rail System - Turn Bar with Delam-Relam (Rail mounted) - Cold Foil (Rail Mounted) - Sheet Stacker (Shingle Conveyor) - Peel & Reveal - Tint Roll with Air Mandrel Lredpfx Aerxrx Ssfaeh - Antistatic Unit (4 bars) - Rotary Die Adaptors (1 Set) - Edge Trim Extraction (Venturi) – requires compressed air supply - Reverse Rewind - Video Inspection System (Double-Sided Viewing, E+L) - FOCUS Video Plate Mounter Platemate - Upgrade: Full-Length Rail - Rail Mounted Snowball Waste Rewind Accessories: Gears (Helical Gearing) Print Cylinder Magnetic Base Die 84T (266.700mm) 8 x Print Cyl. 1 x Mag Cyl 96T (304.800mm) 8 x Print Cyl. 1 x Mag Cyl 99T (314.325mm) 8 x Print Cyl. 1 x Mag Cyl 105T (333.375mm) 8 x Print Cyl. 1 x Mag Cyl 117T (371.475mm) 8 x Print Cyl. 1 x Mag Cyl 88T (Rubber Sleeve) 1 x Varnishing Cyl. 69T (219.075mm) 1 x Mag Cyl. + 17 pcs Anilox Rollers

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, number of print heads: 5, delivery head: 950 mm, product height (max.): 19 mm, product length (max.): 1,600 mm, product width (max.): 1,200 mm, Digital printing machine in cleanroom! The machine was completely overhauled in 2023! TECHNICAL DETAILS Product Dimensions Maximum product size: 1,600 x 1,200 mm Minimum product size: 300 x 300 mm Lodjyk Sdzspfx Afaorh Product thickness: 3–19 mm Conveyor height: 950 mm Printing speed: 80 m²/h MACHINE DETAILS Number of print heads: 5 Cleanroom dimensions External length: 10,500 mm External width: 3,800 mm Internal length: 10,340 mm Internal width: 3,640 mm Weight: 2,500 kg Electrical Data Electrical connection: 400 VAC / 32 A Installed power: 10 kW Compressed Air Compressed air connection: 6.0 bar Air consumption: 50 l/min EQUIPMENT 1 infeed belt 3 outfeed belts

Condition: used, Used Premier Labellers model P150 tamper evident labeller. Can do front and back tamper evident seals/labels to cartons and boxes. Approximate capacity 150PCS/min. Lrsdsymazyepfx Afajh

Condition: like new (used), Norpak Rover150 label applicator Lrjdpfsiy Nm Uox Afajh label applicator, variable speed head, max label width 110mm, with food pedal, 1Ph

Condition: good (used), Year of construction: 2015, Logopak 410 IIIF Labeller Lodpfx Afswtqtueajrh Serial: LP10021552 Logopak print and apply labeller, mounted on variable speed conveyor, conveyor 700mm x 300mm, previously used on labels 100mm x 60mm,

Condition: refurbished (used), Herma semi automatic wrap labeller, Allen Hotfoil Encoder, with spares and manual, all mounted on stainless table, 1Ph Lsdpfx Afoib Dcreaorh