Used Dilr 40 for sale (21,960)

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 873 h, load capacity: 5,000 kg, lifting height: 3,300 mm, fuel type: diesel, mast type: duplex, construction height: 2,450 mm, fork carriage width: 1,200 mm, fork length: 2,400 mm, empty load weight: 7,850 kg, drive type: Diesel, construction width: 1,450 mm, Diesel forklift Crjdpfjvgh U Rox Ab Dsg Load center: 600 Mast type: Duplex Technical condition: good Front tire size: 300-15/8.00 Rear tire size: 7.00-12/5.00 Sideshift, 3rd valve, 4th valve, front working lights, heater, full cab, CE certificate, safety light,

Condition: reconditioned (used), Overhauled and new painted. The pictures are sample photos of similar machines and are intended to show the execution and quality of the overhaul. All wear parts are renewed. Filter cloths new. 1 year warranty on the filter press, excluding wear parts. Plate size: 630 x 630 mm dimensions: approx. 2900 x 1100 x 1500 mm Chamber depth: 25 mm Capacity: 312 liters Operating pressure: 12 / 15 bar Turbidity inlet: flange 2", centered Crsdpfx Abenh Nr Io Deg Number of plates: 40 plates Material plates: Polypropylene Material cloths: PP 5009 (white) Design: open filtration Closing pressure: max. 385 bar Painting: primed and painted in RAL 5010, filtrate trough + drip plate in plastic, Motor hydraulics with single acting cylinder. Optional double-acting cylinder that retracts the heavy pressure plates. With the single-acting cylinder, the operator must push back the pressure plates by hand. Optional: Filling pump as piston diaphragm pump or compressed air diaphragm pump.

Condition: new, Year of construction: 2026, Threading unit OLED display LED lighting Continuous/normal drilling capacity (mm) - R1 30/35 mm - R2 27/32 mm Maximum threading capacity - R1 M30x3.5 - R2 M24x3 Spindle MK IV Drilling depth (mm) 160 Overhang (mm) 300 Column diameter (mm) 140 Usable table surface (W x D) (mm) 590 x 450 Speed display, digital Drilling depth display, digital Drilling depth stop with fine adjustment Table height adjustment with rack and pinion Spindle/table (mm) 150-700 Machine dimensions without control panel (mm) 610 x 900 x 1,980 mm Machine dimensions with control panel (mm) 670 x 1,100 x 2,200 mm Motor, three-phase, 400V with frequency converter (kW) 4.0 Spindle speeds, infinitely variable R1 (1-stage) 0-1000 1/min R2 (1-stage) 0-1600 1/min Manual feed Weight (kg) 400 Optional drilling package 6 (€ 910.00 plus VAT) - Vise [felix] 2.0 150 - Taper shank MK IV/B18 - Reducing sleeve MK IV/MK II - Reducing sleeve MK IV/MK III - Quick-change drill chuck B18 3-16 mm (accuracy 0.17 mm) Delivery in Germany, free of charge, including packaging! NOT THE RIGHT MACHINE? WE ALSO OFFER OTHER FLOTT PRODUCTS – ASK FOR A QUOTE! Crsdpfx Aed Su Agjb Djg FLOTT SUPPORT PARTNER

Condition: new, Year of construction: 2026, Standard equipment: - Thread cutting device - Control panel with OLED display - Robust, high-quality drill head cover - LED lighting - Quickly adjustable and ergonomic drill depth stop - Stepless speed control via rotary knob - Thermal overload protection - Spindle stop - Drill protection with electrical fuse - Connection cable with CEE plug - Mechanical feed of the Z-axis - Incl. electromagnetic clutch for 3 feed speeds - Drill cross with push button - In thread cutting mode: Right/Left TECHNICAL DATA Continuous/normal drilling capacity (mm) R1 - 30/35 (in E335/ST60) R2 - 27/32 (in E335/ST60) R3 - 35/40 (in E335/ST60) Thread cutting capacity max.: R1 = M30x3.5 / R2 = M24x3 / R3 = M36x4 Spindle MK IV Drilling depth: 160 mm Overhang: 300 mm Column diameter: 140 mm Usable table surface (W x D): 590 x 450 mm Speed display: digital Drilling depth display: digital Drilling depth stop with fine adjustment Table height adjustment with rack and pinion Spindle/table: 150-700 mm Spindle speeds stepless: R1 (1-stage) 0-1,000 rpm R2 (1-stage) 0-1,600 rpm R3 (2-stage with reduction gear) 0-4,000 rpm Credpjlfdufjfx Ab Dsg Optionally R1 or R2 without additional charge Additional charge for R3: € 2,250 Accessories drilling package 6 (€ 910.00) - Vise [felix] 2.0 150 - Taper shank MK IV/B18 - Reducing sleeve MK IV/MK II - Reducing sleeve MK IV/MK III - Quick-change drill chuck B18 3-16 mm (accuracy 0.17 mm) WARRANTY: 3 years (single-shift operation) DELIVERY: Free to your site including packaging NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: good (used), Year of construction: 1990, - For connection to multi-spindle turning centers - Storage: Flat magazine, 4 x 450 mm capacity - Bar diameter: 4-52 mm (depending on the guide channel) Crjdjihhz Ropfx Ab Deg - Guide channel diameter: 44 mm - Bar length: approx. 3000-4200 mm - Dimensions L x W x H: 4600 x 750 x 1300 mm - Weight: approx. 850 kg

Condition: new, Year of construction: 2026, NEW – directly from the factory Drill depth and speed display – digital with backlight Thread-cutting capacity M30 (dependent on pitch) Optional: R1 spindle speeds with step-less pre-selection, speed range 100-2000 rpm Optional: R2 spindle speeds with step-less pre-selection, speed range 70-1400 rpm Drilling capacity 35/40 mm Spindle MK 4 Drill depth 160 mm Overhang 300 mm Usable table surface (swiveling) 590 x 450 mm Manual feed Cjdpjd H Rhnsfx Ab Derg Table height adjustment with rack and pinion Machine dimensions (W x D x H) 610 x 850 x 1920 mm Motor – three-phase, 400 V, pole-changing, 1.5/3.0 kW Weight 420 kg 3 years warranty FREE DELIVERY (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: good (used), Year of construction: 2010, functionality: fully functional, 2-axis: Programmable X, R axis Bending length: 2100 mm Crjdpfsya Dggjx Ab Djg Max. force: 40 t Max. opening between beams: 615 mm Max. stroke: 200 mm Approach speed: 140 mm/s Working speed: 0 – 10 mm/s Stroke speed: 140 mm/s Dwell: 6 mm Dimensions (LxWxH): 2900 x 1900 x 3050 mm Weight: approx. 5200 kg The machine can be inspected under power at any time.

Year of construction: 1977, condition: used, machine/vehicle number: IntNr231519, A used Jung HF 40 surface grinding machine, manufactured in 1977, is offered for sale. This is a robust, heavy-duty model. Technical data: Crjdjzx Rrxspfx Ab Deg Type: Hydraulic Table size: 400 x 150 mm Grinding length: 400 mm Grinding width: 150 mm Grinding wheel diameter: 200 mm Grinding wheel width: 16 mm Spindle speed: approx. 2,800 rpm Table speed: infinitely variable from 2 to 20 m/min Automatic vertical feed: 0.002–0.013 mm Machine weight: approx. 900 kg Machine dimensions: approx. 1,300 x 1,200 x 1,500 mm The machine can be inspected under power by appointment. Subject to prior sale and changes or errors in the technical data and information.

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 1,020 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, table width: 550 mm, table length: 1,150 mm, table load: 500 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 28, number of axes: 3, This 3-axis Matsuura Vplus 1000/40 was manufactured in 2005. It features a travel range of 1020 mm in the X-axis, 550 mm in the Y-axis, and 500 mm in the Z-axis. The machine includes a table size of 1150 x 550 mm and a maximum table load of 500 kg. If you are looking to get high-quality machining capabilities, consider the Matsuura Vplus 1000/40 vertical machining centre we have for sale. Contact us for further details. • Travel X: 1020 mm • Travel Y: 550 mm • Travel Z: 500 mm • Table Length: 1150 mm • Table Width: 550 mm • Table Load: 500 kg • Spindle Speed: 12,000 rpm • Tool Holder: SK40 / BT40 • Rapid Traverse: 40 m/min • Tool Positions: 28 Technical Specification Crjdozwu Stjpfx Ab Dog Taper Size SK 40

Condition: used, mileage: 558,740 km, power: 132 kW (179.47 HP), first registration: 11/1992, fuel type: diesel, empty load weight: 6,200 kg, maximum load weight: 4,400 kg, overall weight: 10,600 kg, tire size: 445/70 24, axle configuration: 4x4, wheelbase: 3,200 mm, color: yellow, driver cabin: day cab, gearing type: mechanical, emission class: euro1, suspension: steel, Year of construction: 1992, operating hours: 558,740 h, front tire size: 445/70 24, rear tire size: 445/70 24, Equipment: all wheel drive, trailer coupling, truck registration, Vehicle number for inquiries: 41571 Unimog, 437/40 * Year of manufacture: 1992 * Trailer hitch * Analog tachograph * Transmission type: Manual Crsdpfx Abozxa Hle Djg * Suspension: Leaf spring * Gross vehicle weight: 10,600 kg * Unladen weight: 6,200 kg * Payload: 4,400 kg * Permissible gross vehicle weight: 10,600 kg * Tire condition 1st axle: -- - Tire size: 445/70 R24 * Tire condition 2nd axle: -- - Tire size: 445/70 R24 * Wheelbase: 3200 mm * Tire sizes: 445/70 R24 * Tank inspection valid until 05-2028 * ADR certificate available * Tank: 5200 liters * Pump and meter * 3 seats * On request, we will send you a video and more pictures. Disclaimer: Subject to changes, prior sale, and errors. You can find more pictures and videos on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Application for all (export) documents * Ordering of export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading / load securing * TÜV inspections, registration service * Transport of commercial vehicles Please ask our trained specialists, we will be happy to advise you.

Condition: used, empty load weight: 11,360 kg, maximum load weight: 42,840 kg, overall weight: 54,200 kg, axle configuration: > 3 axles, first registration: 10/2022, suspension: air, tire size: 245/70 17,5, tire condition: 40 %, wheelbase: 1,310 mm, color: black, Year of construction: 2022, front tire size: 245/70 17,5, rear tire size: 245/70 17,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, hydraulic winch * Warntafel * Length 13615 to 18315mm * 4.7 meters telescopic * hydraulically lowerable Eco ramp * widenable Disclaimer: Subject to changes, prior sale and errors. You can find more pictures and videos on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Quick and uncomplicated financing * Application for all (export) documents Crsdpfxjzxa E Io Ab Dog * Ordering of export license plates / customs license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transport of commercial vehicles Ask our trained specialists, we will be happy to advise you.

Condition: used, Horizon PST-40 Mobile Press The Horizon PST-40 is a versatile and powerful mobile press. With its robust construction and diverse features, it offers a reliable and flexible solution for the efficient pressing of folded sheets, brochures, and other printed materials. Key Features - Height Adjustable: The machine can be adjusted in height at the push of a button to optimally adapt to different working conditions - Press Function: The PST-40 uses a roller system to apply high pressure to folded sheets - Marking Function: Offers two modes: In Kicker mode, the last sheet of a set is offset sideways, while in Group mode, the entire set is shifted to create a visual separation between sets, facilitating further processing - Stream Delivery: The integrated stream delivery ensures orderly and consistent stacking of pressed materials - Online and Offline Use: The PST-40 can be integrated into existing production lines or operated independently - Efficiency: Quickly adapts to changing jobs without extensive reconfiguration Specifications - Pressing Force: Max. 20 kN, adjustable - Sheet Size: Min. 60 x 64 mm; Max. 440 x 310 mm - Power Supply: 230V; 50/60Hz - 0.9 kW - Dimensions: 1,100 x 800 x 1,450 mm - Weight: 280 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Crodpsw Evhuefx Ab Dsg Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, Year of construction: 2008, operating hours: 11,507 h, lifting height: 4,040 mm, fuel type: diesel, mast type: duplex, fork length: 1,100 mm, fork width: 1,150 mm, total height: 2,690 mm, total length: 3,000 mm, total width: 1,450 mm, color: orange, Empty weight: 6.900 kg Lifting capacity: 4.000 kg - Year: 2008 - Documentation available: Yes - └ Type Documentation: User manual - CE marking present: Yes - CE certificate present: No - Serial number: 30419 - Operating hours: 11507 - Lifting capacity: 4000kg - Lifting height: 4040mm - Overhead clearance: 2690mm - Fork length: 1100mm - Maximum fork width: 1150mm - Minimum fork width: 790mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Work lights, Half cabin - Mast: Duplex - Drive: Diesel - Motor brand: Toyota - Transport dimensions: 3000mm x 1450mm x 2690mm (l x w x h) - Transport weight [kg]: 6900kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Crsdpezh U Ucofx Ab Dog VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: used, functionality: unexamined, machine/vehicle number: 11413, Year of construction: 2019, load capacity: 5,000 kg, fuel type: diesel, mast type: duplex, power: 55 kW (74.78 HP), TECHNICAL DETAILS Lifting height: approx. 3,300 mm Load capacity: 5,000 kg Attachment: Kaup 4.8T160BIZ or 4.8T160BIZA Design: Integrated fork positioner with side shift Forklift-side connection: Integrated, suitable for Toyota 40-8FD50N Fork-side connection: ISO Class 3B Hydraulic functions: 2 Overall width: approx. 1,350 mm Opening range: 0–1,000 mm, inner edge to inner edge Overall length: approx. 202 mm from the front edge of the lifting carriage Lateral shift: up to ±250 mm from the forklift's longitudinal axis Attachment load capacity: 2,500 kg at a load center distance of 1,200 mm Remaining load capacity: 2,500 kg with central load placement and a load center distance of 1,200 mm Attachment weight: approx. 650 kg Design: Bolted-on forks Fork cross-section: 160 × 50 mm Fork length: 2,400 mm Load guard Kaup 4.8T479.1 Design: Load guard with horizontal square tubes Width: approx. 1,000 mm Height from the ground: approx. 1,200 mm for ISO Class 3B Weight: approx. 24 kg MACHINE DETAILS Mast design: Duplex tele-mast Drive: Diesel Rated power: 55 kW Front track width: 1,150 mm Front tire size: 300-15/8.00 Rear tire size: 7.00-12/5.00 Weight: 8,040 kg Operating hours: approx. 12,190 h EQUIPMENT EEC specification SAS – Active Stability System Variable displacement pump 4-way hydraulics with hose routing for the 3rd and 4th valve SE tires front, single tires Credpozv I I Esfx Ab Deg SE tires rear Professional cab Air conditioning Mini-lever with direction control switch and armrest Rear grab handle with horn button Deluxe multi-function display OK monitor Flashing beacon LED blue spot warning light to the rear Fire extinguisher: 2 kg Transmission protection Cold-climate package with 5W-30 oil and larger battery German type plate TIESA Modification Center Smart Access driver access card Diesel particulate filter Integrated Kaup fork positioner Valve block side shift Kaup load guard

Condition: excellent (used), Huber Unichiller UC055Tw spec. – water-cooled recirculating chiller Manufacturer: Peter Huber Kältemaschinenbau GmbH Model: Unichiller 055Tw spec. Type: UC055Tw spec. Machine type: Recirculating chiller / temperature control unit / process chiller Temperature range: -10 to +40 °C Offered is a used Huber Unichiller UC055Tw spec. with a water-cooled refrigeration unit. The unit is designed for temperature control and process cooling of external closed circuits. Operation is via the Huber Compatible Control system. Technical data: Temperature range: -10 to +40 °C Power connection: 400 V / 3~ N / 50 Hz Current consumption: max. 7 A Refrigerant: R507 Refrigerant charge: 1.07 kg Max. pressure: 25 bar Refrigeration unit: water-cooled CFC- and HCFC-free The UC055Tw series is designed as a recirculating chiller for an external closed temperature control circuit. The unit in question is a special version, “UC055Tw spec.” Dimensions: Width: approx. 600 mm Depth: approx. 600 mm Height: approx. 1,450 mm Weight: approx. 168 kg Equipment: Huber Compatible Control temperature control Digital display Connections for external temperature control circuit Cooling water connections Drain and residual drain Interfaces on the unit Main switch Stainless steel housing Transport rollers Lifting eyes Shipping data: Due to its size and weight, transport is preferably by freight forwarder. Dimensions of the unit: approx. 600 x 600 x 1,450 mm Weight of the unit: approx. 168 kg Cedezukauopfx Ab Derg Condition: Used condition with signs of wear and tear consistent with age and use. The exact optical condition can be seen in the pictures. Scope of supply: 1x Huber Unichiller UC055Tw spec. Connection/cooling water hoses as shown in the pictures Scope of supply as shown in the pictures The machine is available by arrangement. The scope of supply is as shown in the pictures. Subject to change, errors and prior sale.

Condition: excellent (used), Huber Unichiller UC055Tw spec. – water-cooled recirculating chiller Manufacturer: Peter Huber Kältemaschinenbau GmbH Model: Unichiller 055Tw spec. Type: UC055Tw spec. Machine type: Recirculating chiller / temperature control unit / process chiller Temperature range: -10 to +40 °C Offered is a used Huber Unichiller UC055Tw spec. with a water-cooled refrigeration unit. The unit is designed for temperature control and process cooling of external closed circuits. Operation is via the Huber Compatible Control system. Technical data: Temperature range: -10 to +40 °C Power connection: 400 V / 3~ N / 50 Hz Current consumption: max. 7 A Refrigerant: R507 Crodpfxozui U Rs Ab Djg Refrigerant charge: 1.07 kg Max. pressure: 25 bar Refrigeration unit: water-cooled CFC- and HCFC-free The UC055Tw series is designed as a recirculating chiller for an external closed temperature control circuit. The unit in question is a special version, “UC055Tw spec.” Dimensions: Width: approx. 600 mm Depth: approx. 600 mm Height: approx. 1,450 mm Weight: approx. 168 kg Equipment: Huber Compatible Control temperature control Digital display Connections for external temperature control circuit Cooling water connections Drain and residual drain Interfaces on the unit Main switch Stainless steel housing Transport rollers Lifting eyes Shipping data: Due to its size and weight, transport is preferably by freight forwarder. Dimensions of the unit: approx. 600 x 600 x 1,450 mm Weight of the unit: approx. 168 kg Condition: Used condition with signs of wear and tear consistent with age and use. The exact optical condition can be seen in the pictures. Scope of supply: 1x Huber Unichiller UC055Tw spec. Connection/cooling water hoses as shown in the pictures Scope of supply as shown in the pictures The machine is available by arrangement. The scope of supply is as shown in the pictures. Subject to change, errors and prior sale.

Condition: excellent (used), Huber Unichiller UC055Tw spec. – water-cooled recirculating chiller Manufacturer: Peter Huber Kältemaschinenbau GmbH Model: Unichiller 055Tw spec. Type: UC055Tw spec. Machine type: Recirculating chiller / temperature control unit / process chiller Temperature range: -10 to +40 °C Offered is a used Huber Unichiller UC055Tw spec. with a water-cooled refrigeration unit. The unit is designed for temperature control and process cooling of external closed circuits. Operation is via the Huber Compatible Control system. Technical data: Temperature range: -10 to +40 °C Power connection: 400 V / 3~ N / 50 Hz Current consumption: max. 7 A Refrigerant: R507 Crodpfx Aozui Uwob Djg Refrigerant charge: 1.07 kg Max. pressure: 25 bar Refrigeration unit: water-cooled CFC- and HCFC-free The UC055Tw series is designed as a recirculating chiller for an external closed temperature control circuit. The unit in question is a special version, “UC055Tw spec.” Dimensions: Width: approx. 600 mm Depth: approx. 600 mm Height: approx. 1,450 mm Weight: approx. 168 kg Equipment: Huber Compatible Control temperature control Digital display Connections for external temperature control circuit Cooling water connections Drain and residual drain Interfaces on the unit Main switch Stainless steel housing Transport rollers Lifting eyes Shipping data: Due to its size and weight, transport is preferably by freight forwarder. Dimensions of the unit: approx. 600 x 600 x 1,450 mm Weight of the unit: approx. 168 kg Condition: Used condition with signs of wear and tear consistent with age and use. The exact optical condition can be seen in the pictures. Scope of supply: 1x Huber Unichiller UC055Tw spec. Connection/cooling water hoses as shown in the pictures Scope of supply as shown in the pictures The machine is available by arrangement. The scope of supply is as shown in the pictures. Subject to change, errors and prior sale.

Condition: excellent (used), Huber Unichiller 055Tw Recirculating Chiller Manufacturer: Peter Huber Kältemaschinenbau GmbH Type: Unichiller 055Tw Year of manufacture: 2014 Machine type: water-cooled recirculating chiller Temperature range: -10 to +40 °C Cooling capacity at +15 °C: 5.5 kW Offered for sale is a used Huber Unichiller 055Tw with a water-cooled refrigeration unit, recirculating pump, and Pilot ONE touchscreen control. The Unichiller is designed for externally closed temperature control circuits and is suitable for heat removal in industrial and technical processes, for cooling machines and systems, and for applications in laboratories, research, and production. Technical data: Manufacturer: Peter Huber Kältemaschinenbau GmbH Model: Unichiller 055Tw Year of manufacture: 2014 Serial number: 203739/14 Temperature range: -10 to +40 °C Temperature stability at -10 °C: 0.5 K Power connection: 400 V / 3~ / 50 Hz Current consumption: max. 7 A Refrigerant: R507 Refrigerant quantity: 1.0 kg Max. pressure: 25 bar Protection class: IP20 Cooling capacity: at +15 °C: 5.5 kW at 0 °C: 3.0 kW at -10 °C: 1.5 kW Recirculating pump: C3 Max. flow rate: 100 l/min Max. delivery pressure: 6.5 bar Pump connection: G 1 1/4 AG Cooling water connection: G 1/2 AG Min. cooling water differential pressure: 0.6 bar Max. cooling water pressure: 6 bar Min. filling volume: 5.9 l Expansion volume: 7.5 l Control: Pilot ONE controller with 5.7" color touchscreen Internal temperature sensor: Pt100 Connection for external Pt100 sensor Digital interfaces: Ethernet, USB, and RS232 Digital level indicator Dimensions: Width: approx. 600 mm Depth: approx. 600 mm Height: approx. 1450 mm Cedpfxezui T Hs Ab Derg Weight: approx. 168 kg Equipment: Water-cooled refrigeration unit Recirculating pump Pilot ONE touchscreen controller Stainless steel housing Atmospherically open expansion tank Digital level indicator Ethernet, USB and RS232 interfaces Movable unit on castors Process and cooling water connections Shipping data: Weight of the unit: approx. 168 kg Dimensions of the unit: approx. 600 × 600 × 1450 mm Due to its size and weight, the unit will be shipped by freight forwarder. Condition: Used condition with corresponding optical signs of wear. Scope of delivery: 1x Huber Unichiller 055Tw 2x Stainless steel flexible hose Scope of delivery as shown in the pictures. The unit is available for immediate delivery. Inspection possible by appointment. The scope of delivery corresponds to the pictures. Subject to changes, errors and prior sale.

Condition: used, maximum load weight: 34,250 kg, overall weight: 39,500 kg, axle configuration: 3 axles, first registration: 10/2022, next inspection (TÜV): 04/2027, Equipment: ABS, Excerpt of Equipment Braking System * Complies with ECE-R13 Electrical System * Complies with ECE-R48 * The Kögel superstructure guidelines must be observed! They can be accessed at [website address]. Frame / Chassis Frame * Made of high-quality steel, but without an outer frame * Coupling plate with a 2-inch kingpin according to DIN 74080 / ISO 337 * With cross member and container locking mechanisms for accommodating: a) 1 x 40' High-Cube container (frame extended) * b) 2 x 20' ISO containers (frame extended) * c) 1 x 30' ISO container flush with the rear (frame extended) * d) 1 x 20' ISO container flush with the rear (frame retracted) * e) 1 x 20' ISO container in the middle (frame retracted) * 4 pairs of heavy-duty lashing rings * Frame extension at the rear, extendable by approx. 1,370 mm, load capacity 5,800 kg, with spiral cable * Length adjustable via 1 pneumatic cylinder, low-maintenance guidance on special plastic sliders and 2 extension rollers * Automatic pneumatic locking of the extension Suspension * Axle lift mechanism on the axle * Control of the axle lift fully automatic, load-dependent * Starting aid: Activation via 3x brake, 30% overload up to a speed of 25 km/h * Operation on the chassis via a switch * Also possible from the driver's cab (switch in the cab is necessary - PIN 12) * Three-axle unit SAF INTRADISC, with disc brakes Ø 430 mm, ET 120 * Air suspension with approx. 180 mm suspension travel Tires Csdpfjzkx Hnox Ab Dsrg * 6 x 385/55 R 22.5, 160J (manufacturer of our choice) * 6 steel rims 22.5 x 11.75, offset 120 mm (ET 120) Chassis Components * Kingpin supports (manufacturer at Kögel's choice) mechanically with leveling foot, 24 t lifting capacity * Single-sided operation on the right side of the direction of travel * Splash guard system (spray mist suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with 22.5 tires consisting of * 3 pairs of semi-circular fenders with mud flaps * 2 support wedges with holder * Lateral protection device, according to ECE-R73 * Closed underrun protection made of square steel tube according to ECE-R58 with an * protected lighting carrier arranged above it. Height of the underrun protection profile min. 120 mm, designed for increased test forces Brake / Air Suspension System * EBS system 2S/2M with stability program (includes ABS/ALB function) * EBS connector ISO 7638, (without connection cables) * Parking brake as spring brake, external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 connector * Air suspension system incl. 1 lifting and lowering valve, mounted on the left side in the direction of travel in front of the axle unit * 2 tamper-proof coupling heads at the front ISO 1728 * Air tanks for brake system and air supply made of steel (EN 286-2) * Rear impact guard Steel rear impact guard, solid, on the rear end crossmember Electrical / Electronic System * Lighting carrier made of steel, arranged above the underrun protection KÖGEL LUXIMA Premium Package, consisting of * LED license plate lighting * LED side marker lights and reflectors at the front * Flashing LED side marker lights * Superseal and bayonet connectors for the lights * 2 LED outline lights with arms, mounted on multi-chamber tail light * 2 LED multi-chamber tail lights (without LCG) * Front connector 15-pole ISO 12098 (without connection cables) * Complies with vehicle class FL * AT Information Systems Kögel Telematics System Basic * Trailer incl. location monitoring,

Condition: used, functionality: fully functional, Year of construction: 2001, pipe diameter (max.): 60 mm, power: 1.85 kW (2.52 HP), I-Beam steel, flat 100 x 15 (Ø 500) mm I-Beam steel, upright 50 x 10 (Ø 500) mm Angle steel 50 x 6.0 (Ø 600) mm Round material 35.0 (Ø 500) mm Max. tube diameter 60 x 2.0 (Ø 1200) mm Square material 50 x 50 x 3 (Ø 1000) mm Bending speed 10.0 rpm Top roller diameter 165 mm Bore 40.0 mm Dimensions (L-W-H) 560 x 1430 x 980 mm Adjustment range: upper roller 124 mm Total power requirement 1.85 kW Weight 275 kg Low usage (!!) Manufacturer's list price incl. accessories approx. €12,500 Special price on request Equipment: - electro-hydraulic ring/profile bending machine - heavy and robust machine body - 2x powered rollers (MR2 series) Crjdpjwvrazofx Ab Deg - segmented roller dies - digital position display for top roller (0.1 mm) - manual upper roller adjustment - forward / reverse operation of bending rollers - Bending speed approx. 20% higher than comparable machines in its class - shafts made of forged & ground chrome-nickel steel - machine base frame - suitable for horizontal and vertical operation - mobile control panel - CE marking

Condition: excellent (used), Quick-release nut for balancing machine, clamping nut -Manufacturer: Haweka, quick-release nut for balancing machine -Item No.: 143 403 003 -Suitable for: Haweka ProGrip clamping devices with 40 x 3 mm shaft -Quantity: 1x quick-release nut included -Price: per piece -Dimensions: 290/92/H80 mm -Weight: 0.7 kg/pc. Cedpfx Asx Nnx Hob Dsrg

Condition: good (used), Year of construction: 1998, 1 used universal tool milling machine Manufacturer: INTOS Type: FNGJ 40 Year of manufacture: 1998 Technical data: X-axis: 600 mm Y-axis: 400 mm Z-axis: 400 mm Table size: 800 × 400 mm Table load: approx. 500 kg Spindle connection: SK 40 Spindle speed: 63–3,150 rpm Speed stages: 16 Spindle motor: approx. 4 kW Feed rate X/Y: approx. 16–800 mm/min Feed rate Z: approx. 8–400 mm/min Rapid traverse X/Y: approx. 2,000 mm/min Digital display: depending on the model, 3-axis Heidenhain Cjdpfx Aozyx Rreb Dorg Weight: approx. 2,500 kg Dimensions: approx. 2,000–2,210 × 1,810–2,150 × 1,910–1,950 mm

Condition: good (used), Capacity up to 40 mm Mount: Mk-4 Left/right rotation Cedjy Ht H Rspfx Ab Dorg Variable speed with variator drive

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total width: 2,000 mm, total length: 6,000 mm, total height: 2,000 mm, film width: 250 mm, working height: 900 mm, overall weight: 1,200 kg, roll diameter: 700 mm, warranty duration: 6 months, Equipment: documentation/manual, This machine is a used edge-banding machine from the renowned manufacturer Barberán (model RP-30), equipped with a high-quality Düspohl piston melting unit. The system is specifically designed for the professional edge-banding of profiles and offers high flexibility in terms of the materials and adhesives that can be used. Key technical features: Application area: Ideal for the precise processing of wood and plastic profiles. Adhesive compatibility: Suitable for processing common hot-melt adhesives such as EVA, PO and PUR. Maximum working width: 250 mm for versatile profile geometries. Modern control system: Equipped with a clear control panel including a display for easy monitoring of process parameters. Efficient melting unit: The integration of the Düspohl piston melting unit guarantees a continuous and material-friendly melting process. Crsdjzxh E Aopfx Ab Deg The machine is in a ready-to-use condition and is perfectly suited for woodworking and plastics processing companies looking for a reliable solution for profile coating.

Condition: used, Year of construction: 2010, HEDELIUS C 50-1800 – Vertical CNC Machining Center – Year of Manufacture 2010 – HEIDENHAIN iTNC530 For sale is a high-quality vertical CNC machining center, the HEDELIUS C 50-1800, manufactured in Germany. This machine is ideally suited for tool and mold making, general mechanical engineering, as well as precise single-part and series production. The HEDELIUS impresses with its robust design, proven HEIDENHAIN control system, and large travel range, combined with a compact footprint. Technical Data Crsdpfx Ajzk Etneb Djg Manufacturer: HEDELIUS Type: C 50-1800 Year of Manufacture: 2010 CNC Control: HEIDENHAIN iTNC 530 Travel (X/Y/Z): 1,800 x 510 x 480 mm Table Size: 2,100 x 510 mm Spindle Taper: SK 40 Spindle Speed: up to 8,000 rpm Tool Magazine: 20-position Max. Tool Length: 250 mm Max. Tool Diameter: 63 mm Distance Spindle – Table: 570 mm Machine Weight: approx. 5,500 kg Equipment HEIDENHAIN iTNC530 CNC control 20-position tool changer Coolant system CE marking Condition The machine is in overall good and well-maintained condition. The documented spindle operating time is approximately 9,800 hours. An inspection under power is possible by appointment. Location: Germany _____ Subject to prior sale and errors in the technical specifications. The technical data has been compiled to the best of our knowledge, but does not constitute guaranteed characteristics. Our general terms and conditions apply; in addition, the seller is not liable for typographical or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to commercial enterprises and without warranty.