Used Diode for sale (118)

Condition: new, Coherent OEM laser diode pump module / laser block LDP.1108303, unused, 100% functional, scope of delivery as shown in the photos. Fgsdpfozkc Upox Ahpjd

Condition: excellent (used), Laser system with Laserline diode laser and Lascon controller Here we offer a Lascon laser system with Lascon controller LPC03. Laserline diode laser The diode laser ›LDM 500-60‹ has a wavelength of 935 nanometers and an output power of 550 watts. Laser type: LDM 500-60 Wavelength of 935 nanometers +-10% Laser power: 550 W Supply voltage 100-264V +- 10% Fedpszdqkrsfx Ahpsgd Max. power consumption 1.7 kW Frequency 1 phase 47-63 Hz Type: LDM 500-60 Lascon Controller LPC03 The LPC03 offers the performance of a complete PC in a very small space. Instead of a hard drive, a replaceable flash disk has been installed. Due to the elimination of the hard drive and the extremely low heat generation, the LPC03 is ideally suited for tasks in the field of measuring, controlling and regulating in an industrial environment. The fiber-coupled MA pyrometers QP004 and EP004 can be easily integrated into the device. The fiber optic cable is then simply connected to the rear panel. The housing also offers space for the PCI card PCI-1P. In conjunction with the LASCON measuring and control system, the operating system and software are installed on the flash disk. Technical data: Motherboard: Half Size CPU card Slots: 1 x PCI, length max. 180mm Drives: none Storage medium: replaceable flash disk Connections: USB front; Ethernet, RS232, VGA, keypad, mouse, USB rear Housing: 212mm x 80mm x 250mm (Height x Width x Depth) Protection class: Front: IP40 Environment: 15°C - 40°C Type: LPC03 Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: good (used), Year of construction: 2013, 4 piece diode laser system, Limo Diocut 1300 - second-hand - : Price per piece ex location: 1.950.-€ (net)! Manufacturer: LIMO (Lissotschenko Mikrooptik) Type: Diocut 1300 Year of manufacture: 2013 Fgjdpeumi Stefx Ahped 400V, AC +/- 10% 50/60 Hz I < 16A, 3 phase, + N + PE Condition: good, Available: immediately Location: Warehouse Frankenberg / Saxony

Year of construction: 2026, condition: new, original Screen laser diodes Fgodpfx Ajdmdvvohpjd 100212447V01 Diode fiber 500 mW for Screen PT-R8600 & OEM (64 channel) new & second-hand All offers subject to prior sale

Year of construction: 2026, condition: new, U1150073-10 Second-Hand Block LD for Screen PT-R4xxx/8xxx and OEM, 16/32 channel, >380 mA Fodpfjb Uptcsx Ahpsgd U1150073-10 Refurbished Block LD for Screen PT-R4xxx/8xxx and OEM, 16/32 channel, (new diode inside, used housing) U1150073-10 new, orig. Block LD for Screen PT-R4xxx/8xxx and OEM, 16/32 channel 100262642V00 new, orig. Block LD (Gold, 3 pin, 5.6 V) for Screen PT-R4xxx/8xxx and OEM, 16/32 channel, CTP ᐳ2013 100212447V01 Diode fiber 500 mW for Screen PT-R8600 & OEM 64 Channel, second hand 100212447V01 Diode fiber 500 mW for Screen PT-R8600 & OEM 64 Channel, new

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 74 h, laser power: 3,300 W, laser wavelength: 1,030 nm, power: 12 kW (16.32 HP), input voltage: 400 V, type of input current: three-phase, total length: 770 mm, total width: 1,400 mm, total height: 1,770 mm, Laser unit with low working hours. It was as a backup unit. Fodpfx Ahjtwb Tfspjgd

Condition: ready for operation (used), Fanuc A04B-0811-D401 LD Unit diode laser SN: P95P00037,used, good condition, 100% functional, scope of supply according to photos Fodpfx Aomq H Szehpjgd

Condition: used, functionality: fully functional, mileage: 347,264 km, power: 331 kW (450.03 HP), first registration: 06/2023, fuel type: diesel, overall weight: 8,253 kg, axle configuration: 4x2, wheelbase: 375 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 13,000 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Cab: CR Battery, 210 Ah, rear Diesel engine DC13 164 450 hp Euro 6 /Japan Emission 2016 Gearbox GRS905R Advanced Emergency Braking AEB, Auxiliary brakes, Retarder type R4100D, Exhaust brake control Driver comfort Air-conditioning system, automatic Seat with armrest adjustable shock absorber driver side Seat with armrest adjustable shock absorber passenger side Bed upper lower and upper width 800mm Night heater WTA cab heater 3kW Storage rear lower, driver side refrigerator Technical specifications smart ADR Continental Tyres for front axle, 315/70 Tyres for rear axle, 315/70 Jost JSK37C-Z, height 150 mm *STGO with axle/GVW design weights only Main wheelbase, 3750 mm Axle ratio, i = 2.53 Fuel tank capacity 825 l, left Fuel tank capacity 395 l, right AdBlue tank capacity 105 l, right Road speed limiter, adjustable, limiter (engine speed regulation) Technology Infotainment system 2 DIN with 5 inch screen (Advanced) FMS, Fleet Management System preparation Gateway Fodpfx Ahszi N N Dspegd Exterior Headlamps LED, automatic Daytime running light function LED and position lamps Fog lamp front type LED 3 diodes Cornering light Roof air deflector adjustable Door window air deflector Driver Assistance Package (ADAS) Adaptive cruise control (ACC) Lane departure warning system Lane Departure Warning with Active Steering Active Lane Keeping Assist Tyres Information Front left - 13 mm Front right - 13 mm Rear left inner - 7 mm Rear left outer - 7 mm Rear right inner - 7 mm Rear right outer - 7 mm

Condition: used, Illumina DNA Sequencer MiSeq SY-410-1003 Description: RFID tracking for consumables MiSeq Control Software 2.6 LTSC Operating environment Temperature: 22°C ± 3°C Humidity: Non-condensing 20%–80% Fgodpfezikcrox Ahpsd Altitude: Less than 2,000 m (6,500 ft) Air quality: Pollution degree II Ventilation: Maximum 1,364 BTU/h For indoor use only Light Emitting Diode (LED): 520 nm, 660 nm Dimensions W × D × H: 68.6 cm × 56.5 cm × 52.3 cm (27.0 in × 22.2 in × 20.6 in) Weight: 57.2 kg (126 lb) Power supply 90–264 VAC at 50/60 Hz, 10 A, 400 W Radio Frequency Identification (RFID) Frequency: 13.56 MHz Power: 100 mW Product safety and compliance NRTL certified IEC 61010-1 CE marked FCC/IC approved Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) Weight: approx. 35 kg (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Condition: used, Year of construction: 2008, Heidelberg Suprasetter A52/A75 Fsdpfx Ajzk H Igehpsgd with Glunz & Jenen C85 washing unit Type: PJ003.0000 Laser head: 64 diodes A52 format: max. plate size 676 × 530 mm A75 format: max. plate size 676 × 760 mm 200–240 V AC, 50/60 Hz, 8 A

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Laser Machine Prima Power CV 5000 Year of Manufacture: 2016 3.1. CV SERIES CO₂ LASER SPECIFICATIONS (CV 5000) Average Power Output: 200 W – 5000 W Peak Power Output: Up to 6 kW Wavelength: 10.6 microns Beam Quality Factor (M²): < 2.4 (typically 2.1 to 2.3) Beam Divergence: 1.5 mrad (half angle) Beam Diameter at Exit: 15 mm 1/e², 21 mm full beam Pulsed Operation – Pulse Repetition Rate: 0 – 2 kHz Pulse Duration: 250 microseconds, 70 µs resolution Alignment Stability: Fgedpfx Aoywwrfohpsd +/- 150 µrad Operating Conditions: • Ambient temperature (max.): 40°C • Ambient temperature (min.): 10°C • Relative humidity: < 95% (non-condensing) Diode Laser: • Wavelength: 635 nm • Output Power: < 1 mW ——— 3.2. CV SERIES CO₂ LASER SUPPLY SPECIFICATIONS (CV 5000) Electrical: • Power requirement: 37 kW • Voltage: 400 VAC – 460 VAC ±10%, 3-phase Cooling: • Required cooling capacity: 45 kW • Flow rate: 133 L/min (35 GPM) • Inlet temperature: 18 – 20°C • Maximum inlet pressure: 6 bar • Nominal inlet pressure: 3 bar • Differential pressure: 1.5 bar • Coolant: Distilled water with 35% Dowfrost HD • Filtration requirement: 100 micron Gas: • Type / Purity / Gas mixture / Consumption: • He: 99.996% | 67.7% | 13.4 – 46.8 SLPH • CO₂: 99.995% | 4.1% | 0.9 – 3.0 SLPH • N₂: 99.996% | 28.2% | 5.8 – 20.2 SLPH • Total Consumption: 20 – 70 SLPH (variable) Additional Requirements: • < 10 ppm water vapor, hydrocarbons, and oxygen • Air: dry – dew point < 2°C • Depending on shutter utilization

Condition: used, functionality: fully functional, mileage: 391,250 km, power: 331 kW (450.03 HP), first registration: 03/2023, fuel type: diesel, overall weight: 8,253 kg, axle configuration: 4x2, wheelbase: 375 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 13,000 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Cab: CR Battery, 210 Ah, rear Diesel engine DC13 164 450 hp Euro 6 /Japan Emission 2016 Gearbox GRS905R Advanced Emergency Braking AEB, Auxiliary brakes, Retarder type R4100D, Exhaust brake control Driver comfort Air-conditioning system, automatic Seat with armrest adjustable shock absorber driver side Seat with armrest adjustable shock absorber passenger side Bed upper lower and upper width 800mm Night heater WTA cab heater 3kW Storage rear lower, driver side refrigerator Technical specifications smart ADR Continental Tyres for front axle, 315/70 Tyres for rear axle, 315/70 Jost JSK37C-Z, height 150 mm *STGO with axle/GVW design weights only Main wheelbase, 3750 mm Axle ratio, i = 2.53 Fuel tank capacity 825 l, left Fuel tank capacity 395 l, right AdBlue tank capacity 105 l, right Road speed limiter, adjustable, limiter (engine speed regulation) Technology Fgedpfjzf N R Hjx Ahpsd Infotainment system 2 DIN with 5 inch screen (Advanced) FMS, Fleet Management System preparation Gateway Exterior Headlamps LED, automatic Daytime running light function LED and position lamps Fog lamp front type LED 3 diodes Cornering light Roof air deflector adjustable Door window air deflector Driver Assistance Package (ADAS) Adaptive cruise control (ACC) Lane departure warning system Lane Departure Warning with Active Steering Active Lane Keeping Assist

Condition: used, functionality: fully functional, mileage: 404,355 km, power: 338 kW (459.55 HP), first registration: 10/2023, fuel type: diesel, overall weight: 8,523 kg, axle configuration: 4x2, wheelbase: 375 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 13,000 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Adaptive Cruise Control. Cabin: CR (air comfort suspension). Tilting: mechanical. Batteries 210 Ah (rear position). Alternator charge 150 A. Engine DC13 175 460 hp EURO 6. Gearbox: G33CM. Advanced Emergency Braking AEB, Auxiliary brakes, Retarder type R4100D, Exhaust brake control Side Collision Avoidance Support Driver attention support Driver comfort Air-conditioning system, automatic Seat with armrest adjustable shock absorber driver side Seat with armrest adjustable shock absorber passenger side Bed upper lower and upper width 800mm. Night heater WTA cab heater 3kW. Storage rear lower, driver side - refrigerator. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front tyres 315/70R22.5. Fgsdszf N Ryspfx Ahpsd Rear tyres 315/70R22.5. Fifth wheel Jost JSK37C-Z, height 150 mm *STGO with axle/GVW design weights only. Drive Axle Ratio 2.31 Fuel volume left side 825 dm3. Fuel volume right side 395 dm3. AdBlue tank capacity 150 l, right Fuel tank material aluminium. Speed limitation legal 90 km/h. Technology Infotainment system 2 DIN with 5 inch screen (Advanced) FMS, Fleet Management System preparation Gateway Exterior Headlamps LED (automatic). Daytime running light function LED and position lamps. Fog lamp front type LED 3 diodes Roof air deflector adjustable Door window air deflector

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2016, laser type: CO₂ laser, laser power: 5,000 W, CNC laser cutting machine TruLaser 3030 (L20) 5000 Watt X working area max.: 3000 mm Y working area max.: 1500 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Fsdpjzix Upefx Ahpogd Laser power: 5000 Watt Operating hours: 43,349 hrs Laser beam on: 29,598 hrs Sheet metal thickness St. Max.: 25 mm Sheet metal thickness Va. Max.: 20 mm Sheet metal thickness Al. Max.: 12 mm Standard equipment Machine - Closed machine frame with integrated laser unit - Motion unit for highly precise machining - Torque drive in combination with linear direct drives - Closed beam guidance - Single-cutting head strategy - Cooling unit - Automatic pallet changer in the longitudinal direction - 17" touch color screen - Longitudinal conveyor belt - Ergonomic control panel with touch color screen - Work area lighting - Positioning laser diode - Spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine TRUMPF Laser - CO2 laser TruFlow 3200 with optimized standby mode - Maintenance-free turbo radial fan - High-frequency excitation - Laser control TASC - Laser power control - Laser logbook function Cutting head - Lens cutting head with 250 mm lens - Universal quick-change device (UTI) with bus connection - LensLine with condition monitoring - ControlLine: Height control and sheet edge detection - Lens with RFID chip Control system - SINUMERIK 840D SL control system - Easy operation - Simple workshop programming - TruTops Laser via network access - Extended workshop programming - Fast reproduction - Automatic shutdown - ContourLine - FastLine - FlyLine - Microweld - Production plan - AdjustLine - Teleservice via internet Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Machine enclosure with Makrolon panes - TruFlow 5000 with optimized standby - Technology package for lens and nozzle automation (includes nozzle changer, beam alignment and LensLine with automatic condition monitoring) - CoolLine - Extended pallet infeed - Wide transverse conveyor belt with tilting container (container on the left side of the machine) - Optional platform installation (without steel structure)

Condition: excellent (used), Here, we offer you an Iridex laser system, the OcuLight SLx. Laser IRIDEX Oculight SLx Tri-Mode 810 nm Diode Laser Description: Designed for longevity, with a thermal management system to increase the efficiency and reliability of laser conversion. Improved user interface with conveniently arranged, easy-to-understand controls. Enables easy transport between rooms and offices. The tri-mode capability offers three different laser energy delivery modes: CW-Pulse, MicroPulse, and Long-Pulse. An extremely ergonomic user interface, infrared wavelength, and a wide range of delivery systems offer a broad spectrum of treatment options. Well-suited for retinopathy of prematurity and end-stage glaucoma. The CW-Pulse mode delivers energy in single or repeated exposures. The LongPulse mode delivers laser energy over longer periods. The MicroPulse mode delivers laser energy in a series of short pulses, allowing for fine control of the thermal effects. Features: Application area: ophthalmology Amplifier medium: solid-state Ergonomics: table-top unit Fgsdpfx Aozd Uubjhpjd Wavelength: 810 nm Treatment laser power: infrared diode laser 810 nm, 0–3000 mW Target laser power: red diode laser 650–670 nm, 0 to < 1.0 mW Delivery devices: EndoProbe, TruFocus LIO, portable SLAs, DioPexy, G-Probe, Large-Spot-SLAs, LIO and OMAs Exposure durations: CW-Pulse 10-9000 ms, MicroPulse 0.1-1.0 ms, LongPulse 10s-30 min No external air or water cooling required. Weight: 6.4 kg Length: 10 mm Width: 30 mm Height: 30 mm Clinical applications: The Oculight SLx laser system can be used to perform retinal photocoagulation and glaucoma procedures. While this infrared laser (810 nm) can be used for conventional photocoagulation, it also has some unique treatment options, such as: transscleral retinal photocoagulation for retinal tears and detachments, transscleral cyclophotocoagulation for refractive glaucoma, transpupillary thermotherapy photocoagulation for choroidal lesions, and MicroPulse photocoagulation below the threshold for diabetic retinopathy and age-related macular degeneration (AMD). Laser-indirect ophthalmoscope (LIO) The TruFocus Laser Indirect Ophthalmoscope (LIO) is ideal for patients who are best examined and treated in the supine position. It is considered to have a unique optical design in the industry, which eliminates the need to adjust the laser focus and allows for a wide range of working distances. Type: Iridex OcuLight SLx Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and information are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: excellent (used), Here, we offer a laser beam source from Coherent. Designation: AVIA 355-X Fodpfx Ahszdy H Aopsgd Operating hours: Diodes 43022/43022, Head 42955 Crystal Shifter: 1845.91 hours Wavelength: 355nm Excitation: diode-pumped Laser type: Nd:YAG laser Laser type 2: THG, Q-Switch Operating mode: pulsed Laser power: 10 W at 60 kHz Beam divergence:

Condition: good (used), Here we offer a laser beam source from Coherent mti PC. Designation: AVIA 355-X Operating hours: Diodes 1975/1975, Head 26488 Wavelength: 355 nm Fodpfx Aszdrpcohpsgd Excitation: diode-pumped Laser type: Nd:YAG laser Laser type 2: THG, Q-Switch Operating mode: pulsed Laser power: 10 W at 60 kHz Beam divergence:

Condition: good (used), Here we offer a laser source from Coherent. Designation: AVIA 355-X Operating hours: Diodes 39134/45933, Head 39092 Wavelength: 355 nm Excitation: diode-pumped Laser type: Nd:YAG laser Laser type 2: THG, Q-Switch Fgodpfx Aszdqu Dohpod Operating mode: pulsed Laser power: 10 W, 60 kHz Beam divergence:

Condition: good (used), Trumpf Vectormark Type: VMc2 Trumpf Vectormark laser marker with Fuchs extraction and filtration unit Fsdpfozdqcuox Ahpegd Trumpf Vectormark GREEN 532nm Trumpf VMc2 Laser marker, with frequency-doubled diode-pumped Nd:YAG laser with Hurryscan 10 - galvanometer head from Scanlab Fuchs extraction and filtration unit TKFD The integrated pre-separator ensures high filter capacity Different filter stages are possible and can be perfectly adapted individually Ideal for confined spaces – can be placed under a table or integrated into machines Welding fume extraction class W3, IFA certified TKFD can also be transported in the trunk without modification Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: refurbished (used), functionality: fully functional, The IDEAL 5222 Digicut is a professional stack cutter for digital printing. Electromechanical blade drive. Hydraulic drive for the clamping beam. Infinitely adjustable clamping pressure (min. 200 daN, max. 1100 daN) with a display on a manometer. Foot pedal for pre-clamping or as a cutting guide. Clamping beam cover. Electrically operated back gauge with professional program control. Electronic handwheel with infinitely adjustable speed for manual fine adjustment of the back gauge. Optical cutting guide with bright light-emitting diodes (LEDs). Clamping beam guided on both sides for uniform clamping pressure. Precision back gauge spindle. 520 mm cutting length 80 mm stacking height 90 mm trim with clamping beam cover Dimensions: L 131 x W 95 x H 109 cm (width increases to approx. 165 cm including side tables) Weight: 328 kg Clamping pressure: Infinitely adjustable from 200 to 1100 daN Safety: Electronically controlled safety light curtain on the front table Electronic control module for the back gauge: Digital dimension display, dimension indication in cm/inches (display accuracy 1/10 mm). Direct dimension input via a numeric keypad. Memory function for chain cuts, additional automatic memory. 99 programs with 99 program steps each (up to 9 chain dimensions can be saved as one program step). Machine self-diagnosis with error display on the display. 230 volts / New TÜV inspection / New blade. Fgodpfszi A Hvjx Ahpjd Machine is in very good condition. Operating manual is also included. Delivery possible in the Rhine-Main area. Collection possible, shipping possible.

Condition: used, Year of construction: 2017, CNC gantry plasma cutting machine (beveling unit) Manufacturer: Zinser Type: 2425-I/3600 Year of manufacture: 2017 CNC control: 5010 Travel length: 11 m Oxy-fuel cutting table with oscillating conveyor system, including dust extraction system Dimensions: 2,000 x 8,000 mm 1 plasma torch with Hypertherm XPR300 power source automatic gas console including automatically rotating plasma beveling unit Bevel System 2015/350 Downflow filter system 3DFP9-SP Power: 9 kW Laser diode Fgjdpfxow Rpvbo Ahpjd 3726

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2018, laser power: 8,000 W, Manufacturer: TRUMPF Type: TruLaser 3060 fiber (L66) Year of manufacture: 2018 Working area 6000 x 2500 x 115 mm Laser power: 8000 watts Control: Siemens Sinumerik 840D SL Standard equipment Fodpfx Ahowl I Tvepsgd Machine ⦁ Working area 6000 x 2500 mm ⦁ Closed machine frame ⦁ Integrated cabinet with roller shutter ⦁ Automatic pallet changer in longitudinal direction ⦁ Gantry drive combined with linear direct drives ⦁ Closed beam guidance via laser light cable (LLK) ⦁ Cooling unit ⦁ Integrated control cabinets ⦁ Longitudinal conveyor belt ⦁ Work area lighting ⦁ Positioning laser diode ⦁ Spraying system ⦁ PierceLine ⦁ FocusLine ⦁ NitroLine ⦁ PlasmaLine ⦁ Automatic nozzle cleaning Extended features: ⦁ External TruDisk 8001 solid-state laser with 1 LLK output (includes BrightLine fiber and Fusion Cut Performance Package) ⦁ DetectLine ⦁ Drop & Cut ⦁ Advanced Condition Guide sensors ⦁ Cameras 1+2 ⦁ Cross conveyor ⦁ Wireless Operation Point ⦁ Dust protection for device plate ⦁ High-speed cutting package ⦁ Copper cutting package - O2 and N2 cutting data ⦁ Brass cutting package - N2 cutting data ⦁ Smart Collision Prevention (only in conjunction with TruTops Laser or TruTops Boost)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 18,948 h, machine/vehicle number: A0215A0087, laser power: 2,000 W, sheet thickness steel (max.): 12 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 75 mm, No minimum price – guaranteed sale to the highest bidder! A maintenance checklist from December 2025 is attached! The defects listed there have been completely rectified (see attached activity report from Trumpf)! TECHNICAL DETAILS Working area X-axis: max. 3,000 mm Working area Y-axis: max. 1,500 mm Fodpfx Ahozdp Ntopegd Working area Z-axis: max. 75 mm Speed X: max. 60 m/min Speed Y: max. 60 m/min Speed Z: max. 60 m/min Simultaneous speed X/Y: max. 85 m/min Sheet metal thickness, steel: max. 12 mm Sheet metal thickness, stainless steel: max. 6 mm Sheet metal thickness, aluminum: max. 5 mm Workpiece weight: max. 575 kg MACHINE DETAILS Control system: B&R Arnco Laser type: TruCoax 2000 Laser power: 2,000 W Dimensions and weight Footprint (L x W x H): 7,400 x 3,300 x 2,300 mm Transport width: 2,464 mm Weight: 9,000 kg Electrical connection: 65 kVA Operating hours (as of December 17, 2025) Operating hours, laser: 18,948 h Laser beam on-time: 3,635 h EQUIPMENT Closed machine frame with integrated laser head Motion unit for high-precision machining Drives with maintenance-free three-phase servo motors Sheet metal support accessible from both sides Enclosed beam guidance Fully integrated cooling unit Traveling extraction system Collection container for falling parts under the working area Positioning laser diode FocusLine

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: SENFENG, laser type: fiber laser, laser source manufacturer: MAX, laser power: 1,200 W, laser wavelength: 1,080 nm, sheet thickness (max.): 12 mm, table length: 600 mm, table width: 600 mm, table height: 50 mm, working length: 600 mm, working width: 600 mm, working height: 50 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 50 mm, cutting speed: 500 mm/min, positioning accuracy: 0.01 mm, repeat accuracy: 0.01 mm, input voltage: 220 V, input frequency: 50 Hz, type of cooling: air, overall weight: 151 kg, total length: 1,110 mm, total width: 1,205 mm, total height: 775 mm, warranty duration: 12 months, Equipment: CE marking, cooling unit, dust extraction, emergency stop, fume extraction, SENFENG Tools D-Series – 7-in-1 Desktop Laser Workstation The SENFENG Tools D-Series is a compact, multifunctional laser workstation for workshops, small manufacturing companies, repair shops, creative studios, metalworking businesses, and professional users who want to combine multiple processing steps in a single system. The D-Series combines CNC laser cutting, CNC laser engraving, diode laser cutting, diode laser engraving, handheld laser welding, handheld laser cutting, and laser cleaning and rust removal. This reduces external processing costs, saves space, and expands production capabilities within the company. Depending on the configuration, the series is available with 800W or 1200W fiber laser power, as well as an optional diode laser. The dual-laser system enables the processing of both metals and non-metals: the fiber laser is designed for cutting, welding, and cleaning metals, while the blue diode laser can cut or engrave wood, acrylic, leather, and other non-metals. Key advantages: • 7-in-1 laser workstation for cutting, welding, cleaning, and engraving • Up to 1200W fiber laser power • Optional fiber laser and diode laser system • Max. cutting thickness: carbon steel up to 12 mm, wood up to 25 mm • CNC processing speed up to 500 mm/s • Repeat accuracy up to ±0.01 mm in Ultra-Cut models • Fully enclosed work area with integrated smoke extraction • Graphite protective plate with drawer design • Laser head change in approx. 30 seconds • Intelligent height following function, edge detection, and obstacle avoidance • Common edge cutting for better material utilization • Control via PC, mobile device, or touch panel Available variants include D300 and D600 Welder, D300 and D600 Combo, D300 and D600 Combo Pro, and D300 and D600 Ultra Cut. The D300 models are designed for compact workspaces, while the D600 models offer more power and a workspace of up to 600 × 600 mm. Fgodpozfhn Rsfx Ahpjd For handheld laser welding, the machine supports continuous welding, spot welding, and pendulum welding. Depending on the model, the welding thickness ranges from 0.2 to 4 mm or 0.2 to 5 mm. The air-cooled system is designed for flexible use in workshops and does not require extensive industrial infrastructure. The Combo and Combo Pro versions combine CNC automation with handheld processing. Users can flexibly switch between precise CNC processing and manual processing. Typical materials include stainless steel, carbon steel, aluminum, brass, galvanized steel, wood, acrylic, leather, and other suitable materials. The fully enclosed safety design creates a visible and protected work area. Emergency stop, smoke extraction, and a mechanical laser selection switch support safe and clean operation. Depending on the model and market version, the D-Series has CE, FDA, FCC, and other relevant certifications. Typical users include metalworking shops, automotive repair shops, custom fabrication studios, small-batch manufacturers, signage and engraving companies, wood and creative workshops, educational institutions, and teams for prototype construction and product development. The SENFENG Tools D-Series is a compact solution for users who want to handle more tasks internally with a single machine – from laser cutting to engraving, welding, and cleaning.

Condition: used, mileage: 722,540 km, power: 368 kW (500.34 HP), first registration: 05/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 01/2027, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Vehicle equipment and technical details: General Information: * Chassis type: S 500 A4x2EB * VIN: YS2S4X20005553872 * Maximum permissible gross combination weight: 18 tonnes Technical Data: * Product class: Truck * Wheel configuration: 4x2 * Wheelbase: 3,600 mm * Chassis width: 2,600 mm * Chassis height: extra low * Front axle load (technical): 7,500 kg * Rear axle load (technical): 11,500 kg * GVW, legal: 18,000 kg * GVW, technical: 44,000 kg * Maximum permissible gross weight, technical: 19,000 kg * Emission standard: Euro 6 * Engine: DC13 155/500 hp, 368 kW (500 PS), displacement: 13 litres * Transmission: GRS905R, Opticruise, TMS2 * Retarder: Scania R3500 * Front axle tyre size: 355/50 R22.5 * Rear axle tyre size: 295/60 R22.5 * Rim material: Aluminium * Front rim type: 22.5x11.75 Aluminium Alcoa DuraBright * Rear rim type: 22.5x9.00 Aluminium Alcoa DuraBright * Brake system: EBS7 electronic, ABS/EBS: 4S/4M * Hill Hold: available * Air tank capacity: front 70 dm³, rear 30 dm³ * Suspension: air suspension front and rear, extra low air suspension at front * Level control: fast, for truck and trailer * Steering gear: ZF 8098, ratio: 17-20:1, adjustable steering wheel (tilt + telescopic) * Speed limiter: 89 km/h (legal limit 90 km/h) Cabin: * Type: CS, length: 2,000 mm, roof height: high * Colour: Ebony Black * Windscreen: tinted, with rain sensor * Air conditioning: automatic, with auxiliary heater (WTA cab heater 3 kW) * Roof hatch: electric * Cab suspension: air comfort * Driver and co-driver seats: Premium, black leather, driver’s seat with adjustable backrest and seat ventilation * Lower bunk: extendable from 800 to 1,000 mm, mattress: pocket spring * Upper bunk: width 700 mm, with safety net * Bluetooth: available * Navigation: with topographic maps for Europe * Audio system: AUS4 Fgedpfjyv Uh Isx Ahpjd * USB interfaces: dashboard passenger side, driver and passenger sides, rear wall * Headlights: LED, fog lights: LED (3 diodes), daytime running lights: LED * Mirrors: electrically adjustable and heated, convex, driver/passenger side * Storage compartments: driver/passenger side, fridge at rear left driver’s side, drawer at rear right passenger side Additional Equipment: * Fifth wheel: +GF+ SK-S36.20 2/128, position: -510 mm * Mounting plate: 22 mm, D-value max 152 kN * Rear splash guard: plastic, length 96 mm * Spray-suppression, EU 109/2011 compliant: with * Front mirror: electrically adjustable and heated * Horn: compressed air, 118 dBA * Trailer brake coupling: ISO type, 1x15-pin connector Certificates: * Advanced Emergency Braking: E4 - 131R - 010008 EXT.05 * Lane Departure Warning System (LDWS): E4 - 130R - 000010 EXT.04 * Speed Limiter: E4 - 89R - 000069 EXT.13 Other Details: * Front axle tyre size: 355/50R22.5 * Rear axle tyre size: 295/60R22.5 * Fuel tank: 450 + 450 ltrs. * AdBlue tank: 96 ltrs. * Technical gross weight: 19,000 kg * Curb weight: 8,227 kg * Permissible trailer load: 26,470 kg * Overall length: 5,810 mm * Wheelbase: 3,600 mm * Safety inspection due: 07.2026 Vehicle number: 11934 Errors and prior sale excepted. All advertising and various lettering have been digitally removed. We are happy to assist you with all formalities arising in the purchase of a vehicle—please simply let us know your requirements and suggestions, and we will take care of the rest. Among other services, we can offer the following at an additional charge: