Used Trumpf Quicksharp for sale (394)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2013, operating hours: 94,936 h, controller manufacturer: Siemens SINUMERIK 80 D, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 100 m/min, TECHNICAL DETAILS Working Area X-axis: 3,000 mm Y-axis: 1,300 mm Z-axis: 600 mm B-axis: ±135° C-axis: n × 360° Speeds X / Y / Z axis: 100 m/min B / C axis: 540 °/s Acceleration Simultaneous: 17.3 m/s² X / Y / Z axis: 10 m/s² B / C axis: 200 | 100 rad/s² Maximum Positioning Accuracy Linear axes X / Y / Z: 0.03 mm Rotary axes B / C: 0.005° Maximum Positioning Deviation Linear axes X / Y / Z: 0.08 mm Rotary axes B / C: 0.015° MACHINE DETAILS Laser type: Solid-state laser TruDisk 3001 Laser output: 3,000 W Cutting gas: Nitrogen Control: Siemens SINUMERIK 80 D Operating Hours "Laser On" hours: 94,936 h Operating hours: 99,293 h EQUIPMENT Magnetic coupling Dynamic cutting optics with f = 150 mm FocusLine FastLine Cell ObserveLine Rotary changer D = 4,000 mm including safety backing Scrap conveyor 4× configurable control interface Valve terminal for 8 pneumatic clamps per side 2× load status indicator for rotary changer Extended compressed air supply on equipment panel including vacuum ejectors Cutting gas: compressed air Renishaw touch probe Measuring head (without probe) Measurement data processing 3× horizontal fixture interface Extraction ducting Protective enclosure for rotary changer including safety device, 1 window and column for control panel Status signal light (top & bottom) Hedpfoxlctzox Ag Njnu Video monitoring with camera Monitor mount Special installation Cooling unit KLH

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, operating hours: 13,265 h, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 15 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, TECHNICAL DETAILS X-axis: 4,000 mm Hnsdpfxoxl T Rws Ag Nsu Y-axis: 2,000 mm Maximum Speed: 140 m/min Control: SINUMERIK 840D SL Laser Excitation: Diode Module Chiller Unit: Air/Water LASER DATA - TRUDISK 3001 Laser Power: 3,000 W Sheet Thickness, Mild Steel: 20 mm Sheet Thickness, Stainless Steel: 15 mm Sheet Thickness, Aluminum: 15 mm Sheet Thickness, Copper: 6 mm Sheet Thickness, Brass: 6 mm MACHINE DETAILS Length: 11,150 mm Width: 6,650 mm Height: 2,200 mm Base Machine Weight: 12,000 kg Laser Beam On Time: 13,265 h (03.02.2023) Laser On Time: 3,172 h (03.02.2023) EQUIPMENT - Semi-automatic pallet changer - Laser beam guidance via fiber optic cable - Linear motor technology - Integrated control cabinets - Slag boxes - Laser diode positioning - TruDisk driven by machine - PierceLine - FocusLine - NitroLine - Transport and positioning device - Automatic nozzle cleaning - Universal laser cutting head - Protective window monitoring - ControlLine - Lens protective glass - Internet teleservice - Programmable gas pressure - FastLine - Multi-sheet processing - Condition monitor - Micro-welding - Central Link - CE certifications - Compact dust collector - Extraction unit - Automatic pallet changer (with light barriers)

Condition: good (used), Year of construction: 2012, Trumpf TruLaser 1030 Laser Cutting Machine with TruCoax 2500 Diffusion Cooled CO2 Laser & Trumpf CNC Control 2-Axis; Sheet Size 1,500mm x 3,000mm; Fully Automatic Pallet Changer with (2) Pallets, Dimensions Approx 3,000mm x 1,600mm each; 7.1/2" Lens Cutting Head; CO2, 2,500 Watt Laser Capacity; Nitro Line; 15" TFT Screen; RJ45 & USB Interface; S/No. of Machine A025A0366. Hnedpjxncp Ujfx Ag Nou Integrated KLH Chiller Unit; 400 Volt; 2 Axis; Closed Machine Frame Integrated Laser Unit; Sheet Support Accessible from both sides; Motorised Front Door & Rear Opening; Traverse Speed Approx 40 MPM; Weight Approx 8,900kg; (3) SICK C4000 Select Safety Light Curtains; (1) 3M Scotchcal 8518 Gloss Graphic Protection over Laminate 1,372mm x 45.72 Meters Drill Pallet Changer Template for Trulaser 1030 Machine (Unused).

Year of construction: 2008, operating hours: 23,749 h, condition: ready for operation (used), Main Drive Hnsdpfx Ajxa H Tbsg Nju Laser power 5000 W Number of axis 3 Workpiece Workpiece X 3000 mm Workpiece Y 1500 mm Workpiece Z 115 mm Workpiece weight 900 kg This 3-axis TRUMPF Trulaser 5030 was manufactured in 2008. It features a robust 5000W laser and can handle sheet metal up to 25mm thick. With a maximum working area of 3000mm x 1500mm and speeds up to 300m/min, it's ideal for high-speed cutting. Consider the opportunity to buy this TRUMPF Trulaser 5030 fiber laser cutting machine. Contact us for more information about this machine. Application Types Cutting

Year of construction: 2001, condition: excellent (used), Make: Trump card Type: TRUMATIC 2000R Year of construction: 2001 Work area: 1270 x 1270 mm Punching power: 18 to Maximum sheet thickness: 6,4 mm Maximum workpiece weight: 75 kg Maximum punching diameter: 76 mm Max speed: 90/60/108 m / min Accuracy: +/-0.1 mm Length: 5100 mm Width: 5800 mm Height: 2070 mm Hsdpfx Aodyn Rijg Nenu Weight: 9200 kg Accessories: TOPS 2000 CAM software, tool holder, very good condition, just thin sheets

Condition: used, functionality: fully functional, Year of construction: 2011, machine/vehicle number: A1220A0779, Trumpf CNC laser cutting machine, model Trulaser 3030 (5KW) Travel range X/Y/Z: 3000mm/1500mm/115mm, Hnjdpfx Agexnc Iwj Nju Max. material thickness mild steel/stainless steel/aluminum: 25mm/20mm/12mm, Axis speed: 140m/min, Laser type: TruFlow 5000, laser power: 5000W (5kW), Machine dimensions X/Y/Z: approx. 9300mm/4600mm/2200mm, Weight: approx. 12,000kg, Operating hours (see photo) Laser hours (see photo) Documentation available. On-site inspection possible.

Condition: excellent (used), Year of construction: 2017, operating hours: 3,200 h, pressing force: 130 t, Space requirement: 11,500 mm x 10,000 mm + Increased installation height/lift + 230 mm + 4-axis backgauge system + Rear work area lighting + Front work area lighting - TruBend documentation Automation BendMaster (60) Standard equipment: BendMaster - Sturdy base frame and manipulator made of cast aluminum construction - Load capacity 60 kg, sheet plus gripper - Low-level floor track in welded construction - Sheet sensor for contour detection - Rotary feedthrough for quick gripper change Hjdoxayl Dspfx Ag Nenu Gripper coupling on the BendMaster - Sensor system for 4-axis backgauge system - Electric drives - Double sheet detection - NC regrip station - Vacuum generation for suction grippers Control - TRUMPF PC control with operator terminal - Teleservice via internet - Convenient operation: screen, mouse, keyboard Safety - Safety fence with access door Special equipment + Track extension to 10 m + Gripper change console + Modular vacuum gripper without separation (materials for 3 grippers) + Modular vacuum gripper with separation (materials for 3 grippers) + Clamp gripper with rotary axis + Sheet removal station with linear axis + Additional pallet for sheet removal station + Right-hand side door for safety fence (or left-hand side in combination with ToolMaster) Machine - Robust machine frame entirely in steel construction - Press beam - Spherical mounting of pressure beam with inclined position - Electro-hydraulic upper drive system with 4-cylinder technology - Optical set-up and positioning assist with control valves - Generous free space for bending - Flat front covers - Block hydraulic system - Electronic pressure gauge - Measuring system with glass scale and spring-back compensation - Hydraulic oil in machine (lifetime lubrication) - Oil cooler - Electrical cabinet cooling via air-to-air heat exchanger - Modern machine design Backgauge System - 2-axis backgauge system, X and R axes Tool Clamping - Hydraulic upper tool clamping - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - CNC crowning Control - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock speed - 2 GB RAM - 15-inch touch screen - Network capability - Teleservice via internet Operation - Control panel with LCD keypad and foot switch - Communication rail - MobilControl Safety - Standard safety equipment - CE marking

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2015, operating hours: 33,749 h, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, workpiece weight (max.): 1,700 kg, TECHNICAL DETAILS X-axis: 4,000 mm Y-axis: 2,000 mm Z-axis: 115 mm Maximum workpiece weight: 1,700 kg Maximum speed: 140 m/min Controller: CNC Sinumerik 840D SL Positioning accuracy Positioning deviation Pa: 0.1 mm Average positioning accuracy Ps: 0.03 mm Laser data Maximum laser power: 4,000 W Wavelength: 10.6 µm Sheet thickness mild steel: 25 mm Sheet thickness stainless steel: 15 mm Sheet thickness aluminium: 10 mm MACHINE DETAILS Length: 12,000 mm Width: 5,300 mm Height: 2,200 mm Weight: 14,000 kg Total system power consumption: 11–65 kW Beam-on time: 19,152 h (28.08.2025) Laser-on time: 33,749 h (28.08.2025) EQUIPMENT - Automatic longitudinal pallet changer - Longitudinal chip conveyor - Oil vaporizer unit - PierceLine - FocusLine - NitroLine - PlasmaLine - TruFlow 4000 CO2 laser with optimized standby mode - Maintenance-free radial turbine - High-frequency excitation - TASC laser control - Laser power control - Laser logbook - LensLine with status monitoring - Cutting head with 250 mm focal length - Quick-change cutting head unit (UTI) - ControlLine - Lens with RFID chip - ContourLine - Micro-welding - FastLine Hedpoxl T Rdsfx Ag Nsnu - AdjustLine - Internet remote services - FlyLine - Simple workshop programming

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, Machineseeker – Trumpf TubeLaser 3000 – Ebertz Under 3,000 Laser Hours Fiber Tube Laser – Immediately Available Manufacturer: TRUMPF Model: TruLaser Tube 3000 fiber (T10) Year of Manufacture: 2020 Machine Number: A044D0013 Operating hours, approx.: 2,750 h (Laser on) TECHNICAL DATA: Max. outer diameter round tube: 152 mm (170 mm with jaw set) Max. circumscribed diameter rectangular tube: 170 mm Max. raw material length for automatic loading: 6,500 mm Machine bed for 6.5 m raw material length Max. finished part length: 4,500 mm Max. workpiece weight per meter: 18.5 kg (120 | 148[3] kg total) Laser: TruFiber 2001 – 2 kW (average power consumption 6 kW) Max. material thickness: - Mild steel: 8 mm - Stainless steel: 4 mm - Aluminum: 4 mm - Copper/Brass: 3 mm EQUIPMENT: - Through-feed chuck with self-centering clamping rollers - Workspace lighting - Feed station with self-centering jaws - Tube support (raw material) with automatically retractable rests - Tube support (finished parts) with extendable guide rollers - High-precision drives - Adaptive clamping technology for through-feed chuck - Eject station for 3 m finished part length (including scrap container) - Parts storage tray TRUMPF Laser • Excitation via pump diodes • Laser power control • Logbook function for laser • Enclosed beam guidance via laser light cable (LLK) Cutting Head • Lens cutting head with 150 mm focal length • Magnetic coupling Controller • TRUMPF controller based on Sinumerik 840D SL • Integrated technology data • Automatic on/off function • Tiltable operator panel with 19" touchscreen • Condition Guide • Remote support interface • Programmable cutting gas pressure Functions • AdjustiLine • NitroLine • FocusLine • ControlLine Data Transfer - Online Update Manager - RJ45 network interface - USB interface - Wireless Operation Point - Central Link Safety - CE Marking (ex works) - Single and dual beam safety light curtains - Monitoring system for gas pressure, temperature, and cooling water - Protective cabin with laser safety windows Hsdpfxoxn Tn Is Ag Nsnu EXTENDED STANDARD EQUIPMENT: • Solid-state laser TruFiber 2001 • Machine bed for 6.5 m raw material length • LoadMaster Tube for 6.5 m raw material length • Laser chiller (water-air) • Compact exhaust system Machine Accessories • Initial set of cutting nozzles • Ceramic part (1 piece) • Jaw set up to D152 mm/D170 mm • Guide rollers for round and rectangular tubes SPECIAL EQUIPMENT: - Increased finished part length (+1.5 m) including additional finished part support - SeamLine Tube with inner detection, weld seam detection on both inner and outer tube surfaces - Low-scratch LoadMaster Tube design, plastic rollers and strips - Adaptive clamping technology – feed station with additional clamping elements for clamping L and U profiles as well as flat material - MobileControl App This used machine can be viewed under production conditions. All information provided without guarantee – sale excluding any warranties or liability and exclusively in accordance with our General Terms and Conditions of Sale and Contract. Subject to prior sale.

Condition: ready for operation (used), Year of construction: 1998, operating hours: 34,327 h, This 5-axis TRUMPF TrumaBend V130 press brake was manufactured in 1998. It features a 3-meter bending length and a 130-ton capacity, with a stroke of 215mm. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V130 machine we have for sale. Contact us for more information about this machine. Hnedpfxoxnd Tbj Ag Nou Application Types Bending

Condition: good (used), Year of construction: 2027, Large format, machine no.: A0060A0763. Control system: Trumpf/Siemens 840 D. Max. punching force: 220 kN. Max. sheet thickness: 8 mm. Max. punching force: 220 kN. Simultaneous X/Y axis speed: 116 m/min. Punching stroke rate: 1,000 strokes/min. Marking stroke rate: 2,800 rpm. 21 tools on 4 tool holders. Max. working width: 3,000 mm. Support table, custom-made. Support table with vacuum lifter. Working width extended to 6,000 mm in manual mode. Sensor-based stripper monitoring. Light sensor on the punching head. Compressed air connection: 7-14 bar. Equipped with Gripmaster, manufacturer: Trumpf, serial no.: 0415045, retractable. Chip conveyor, manufacturer: Schlepp. Cooling water unit. Tool spray lubrication. Control cabinet. Automation: Trumpf SheetMaster, year 2007, length approx. 10,500 mm. Vacuum lifter. Stacking system, manufacturer: Stopa, type HZIE-501305, year 2007, load capacity 3,000 kg. Stacking system, manufacturer: Stopa, type HZIE-501300, year 2007, load capacity 3,000 kg. Hedpfx Asxl Dypeg Nsnu

Condition: ready for operation (used), Year of construction: 1996, Immediately available from site: CNC Punching – Nibbling Machine Trumpf Model: TC 500 R SM 1306 Year of manufacture: 1996 Operating hours: 81,000 CNC control: Sinumerik 840 D TrumagraphCC 220 S Working area: 2535 x 1280 mm Punching force: 22 tons Sheet thickness up to 8 mm Workpiece weight up to 150 kg Max. positioning speed (simultaneous X – Y axis): 108 m/min Continuous C-axis rotation: 360 degrees Maximum stroke rate: 900 strokes/min Max. number of tools: 18 Hodpfjxn R Apox Ag Njnu Automation components: Standard configuration CheetMaster 1306 Sheet Master Grip Master Cassette with multitool for numbers 0 – 9 Cassette with multitool for diameters 1.0/2.0/3.0/4.0/5.0/6.0 mm Each 1 cassette with thread former M3, M4, M5, M6 Truma Grip Truma Sort L Chip conveyor with container Equipment: Multitool actuation Thread forming function Marking function Slitting function 3 clamps Scratch arm machining Small part sensor with part chute Part blowing device Pneumatic follow-up cylinders Softpunch Memory expansion to 256 KB Vibration-damped installation Supplied tools: Multitool 6-station Multitool 12-station Price: €8,000.00 ex site, plus VAT Alternatively, price: €12,000.00 plus VAT, including dismantling, removal, and loading

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2010, operating hours: 49,200 h, machine/vehicle number: Aufbau und Inbetriebnahme möglich, laser power: 5,000 W, sheet thickness steel (max.): 25 mm, workpiece weight (max.): 900 kg, warranty duration: 6 months, working range: 3,000 mm, +incl.preparation LiftMaster 1530; Liftmaster against surcharge Standard equipment: - Closed machine frame with integrated laser unit - Automatic pallet changer - Longitudinal conveyor belt for small parts and waste - Drives: Gantry drive in combination with linear direct drives - Cutting head quick-change device - Laser cutting head 250mm lens - Progr. cutting gas selection/pressure adjustment - APC capacitive height and process control (ControlLine) - AutoLas Plus (FocusLine) - Laser power control - Position laser diode - Hi-Las high-pressure cutting (NitroLine) - Sprintlas (FastLine) Hedpfjuviyqsx Ag Nenu - ContourLas (ContourLine) - PMS plasma sensors (PlasmaLine) - Lens monitoring (LensLine) - Autom. sheet metal outer edge detection - Microweld - Automatic nozzle cleaning - Oil spraying device - Work area lighting - Automatic switch-off - Safety devices (multi-beam light barriers, encapsulated beam guidance) - Multi-chamber extraction system - Compact dust extractor - ToPs 100 lite -RJ 45 network connection - USB interface - TFT color screen - Detailed operating instructions

Condition: ready for operation (used), Year of construction: 2006, Trumpf Trumatic 3050 aka 5030 classic (L15) 6KW 2006 Hedpoxnph Rjfx Ag Nonu Trumpf Trumatic 3050 Serial: A0230A1131 Manufacturer: Trumpf Type: Trulaser 3050 Year of manufacture: 2006 Condition: used Control on: 119.000h Laser beam on: 57.000h Control system: Siemens Laser power: 6000 Watt Sheet thickness St. max: 25 mm Sheet thickness Va. Max.: 20 mm Sheet thickness Al. Max.: 15 mm Cutting heads: 10″, 7.5″, 5″

Condition: ready for operation (used), Year of construction: 2014, operating hours: 30,843 h, Main Drive Number of axis 3 Additional Equipment Resonator: 4kW Co2 This 3-axis TRUMPF TruLaser 3030 was manufactured in 2014. It features a 4.0 kW CO2 resonator and handles a maximum sheet size of 3000x1500mm. If you are looking to get high quality cutting capabilities consider the TRUMPF TruLaser 3030 machine we have for sale. Contact us for more information about this machine. Application Types Hsdpfx Agexgwctj Njnu Cutting

Condition: good (used), Year of construction: 2008, Machine no.: B0623A0001, cutting length 6,050 mm, cutting thickness 4 mm, back gauge 1,000 mm, net weight 20,900 kg, 15 kW, control system, manufacturer Elgo Electric, model P8721, 7 supports Hnjdpfx Asxl Du Tog Neu

Condition: ready for operation (used), Year of construction: 2014, Main Drive Number of axis 3 Hnedpfx Ajxgwcgjg Nou This 3-axis TRUMPF TruLaser 3030 Fiber was manufactured in 2014. It features a 3.0 kW fiber resonator and handles a maximum sheet size of 3000x1500. Ideal for precise fiber laser cutting, consider the opportunity to buy this TRUMPF TruLaser 3030 Fiber laser cutting machine. Contact us for more information. Application Types Cutting

Condition: ready for operation (used), Year of construction: 2018, General Data Measurements width 1340 mm Measurements depth 1900 mm Measurements height 2380 mm Machine weight 3300 kg Main Drive Pressing force 360 kN Hnjdpjxnr E Sjfx Ag Nju Bending length 1020 mm Stroke 120 mm Movement Y-Axis Rapid Traverse 25 mm/s This TRUMPF TruBend 7036 press brake was manufactured in 2018. It features a press force of 360 kN and a bending length of 1020 mm. The machine includes a Touchpoint TruBend operating interface and offers a maximum stroke of 120 mm. Dimensions are 1900 mm in length, 1340 mm in width, and 2380 mm in height, weighing 2600 kg. If you are looking to get high quality bending capabilities consider the TRUMPF TruBend 7036 machine we have for tact us for more information. Application Types Bending

Condition: ready for operation (used), Year of construction: 2000, operating hours: 99,800 h, General Data Measurements height 2200 mm Control Unit Model TRUMPF CNC TRUMAGRAPH CC220S Main Drive Punching force 220 kN Number of axis 2 Hnjdpfx Ajwfiifeg Neu Media Main electronic connection 17 kVA / 50 Hz This TRUMPF Trumatic 500 was manufactured in 2000. A robust CNC punch press, it offers reliable performance for your punching needs. Consider the opportunity to buy this TRUMPF Trumatic 500 CNC punch press. Contact us for more information about this machine. Application Types Punching

Condition: ready for operation (used), Year of construction: 2000, operating hours: 39,700 h, Control Unit Hodpfxjxnd Ufj Ag Njnu Brand DELEM Model DA 65 Additional Equipment CNC electro-hydraulic press brake / CNC Control Model: DELEM CNC control model DA 65 / Swivel control panel, front left / 2D graphic programming & product display / Tool & program library / CNC Controlled Axes: Y1 + Y2 / X / R / Z1 + Z2 / I axis / CNC Controlled Backgauge (X axis) / CNC-Controlled Height Adjustment of the Backgauge (R axis) / CNC-Controlled Adjustment of the Fence Fingers (Z axis) / CNC-Controlled, Pneumatic Die Adjustment (I axis) / WILA Manual Table Crowning, incl. Analog Value Display / TRUMPF Hydraulic Upper Tool Clamping / TRUMPF Manual Lower Die Clamping / 1x Free-Moving 2-Hand / Foot Control / Rear Safety Device (Sliding Door) This 4-axis TRUMPF TrumaBend V130 press brake was manufactured in 2000. It features a CNC electro-hydraulic system with DELEM CNC control, offering precise bending with a pressure of 130 tons and a folding length of 3060 mm. The machine includes multiple CNC-controlled axes for enhanced flexibility and accuracy in operation. Consider the opportunity to buy this TRUMPF TrumaBend V130 press brake. Contact us for more information about this machine. Application Types Bending

Condition: ready for operation (used), Year of construction: 2012, operating hours: 4,000 h, General Data Machine weight 19200 KG Hodpfxjxnd S De Ag Nenu This 4-axis TRUMPF TruBend 5230 press brake was manufactured in 2012. It features a maximum press force of 2,300 kN, a bending length of 4,250 mm, and a stroke of up to 445.0 mm. Equipped with TASC 6000 control and hydraulic upper tool clamping, it's ideal for precise bending operations. Consider the opportunity to buy this TRUMPF TruBend 5230 press brake. Contact us for more information about this machine. Application Types Bending

Condition: ready for operation (used), Year of construction: 2010, This TRUMPF TruLaser Cell 7040 was manufactured in 2010. It features a CO2 laser cutting system with extensive travel ranges: X-axis up to 4000mm, Y-axis up to 2000mm, and Z-axis up to 1000mm. Maximum travel speeds reach 173 m/min, enhancing productivity. It includes a 60 GB hard drive and supports ELA USB and Network programming on Windows 7. For more information about this machine, please reach out to us. Application Types Cutting Hnsdpfjxa H S Dsx Ag Nsu

Condition: ready for operation (used), Year of construction: 2012, Control Unit Brand TRUMPF This TRUMPF TruLaser 8000 was manufactured in 2012. A CO2 laser cutting machine featuring dual 3.6 kW power and a large working area of 2500x8000 mm. Consider the opportunity to buy this TRUMPF TruLaser 8000 CO2 laser cutting machine. Contact us for more information. Application Types Cutting Hodsxg Uk Uspfx Ag Nenu

Year of construction: 2007, condition: ready for operation (used), Control Unit Brand TRUMPF This TRUMPF Trulaser 7040 was manufactured in 2007. It features a working area of X=2500 mm and Y=12000 mm, equipped with 2 laser heads and dual 3.2 kW power. Ideal for large-scale CO2 laser cutting tasks. Contact us for more information. Application Types Hsdpfxsxg Uk Is Ag Nonu Cutting

Condition: ready for operation (used), Year of construction: 2006, Control Unit Brand TRUMPF Main Drive Laser power 5000 W This TRUMPF TruLaser 5030 classic was manufactured in 2006. It features a 5kW power capacity. Notably, it includes a Liftmaster and an extra Liftmaster for spares. This machine is ideal for those looking to get high-quality laser cutting capabilities. Contact us for more information about this machine. Hedpjxgwbvefx Ag Nenu Application Types Cutting