Used Discharge for sale (2,328)

Condition: excellent (used), Year of construction: 2012, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, 2012 CIMC 20FT ISO Tank Container Capacity: 25,060L / 1 compartment with 3 baffles (suitable for partial loads) / 4 lids (1x manhole) UN PORTABLE, T12, 22T6 Steam heating Bottom discharge Payload: 32,050 kg Design temperature: -40/+130 degrees Celsius Valid 2.5-year + CSC inspection until 04-2027 = Additional Information = General Information Year of construction: May 2012 Model year: 2012 Usable for: Chemicals Hodpfx Asxl Rt Nsg Nefn Weights Empty weight: 3,950 kg Payload: 32,050 kg Gross weight: 36,000 kg Functional Compartment volume: 25,000 l Superstructure brand: CIMC 2016, 20FT, 25,000L, L4BN, UN Portable, T11, steam heating, bottom discharge, 5Y: 10/2022 Number of chambers: 1 Condition Technical condition: very good Visual condition: very good Additional Information Please contact Arne Honingh or Piet Swank for further information.

Condition: used, Year of construction: 2004, Dear Sir or Madam, We are offering a used "BERG UND SCHMID" aluminum cold circular saw in good condition. Hfedpfx Aewhmy Heg Njn Model: "Multi Cut 500HA PENTA" Digital miter angle display Infinitely adjustable saw feed Two pneumatic vertical vices Ball-bearing rotary table for miter and rip cuts Mist spray system Year of manufacture: 2004 Serial number: 091 Technical specifications: HM saw blade Ø 500 x 4.2/3.6 x 30 mm Cutting range [mm] 90° 45° left 45° right Round 160 140 140 Square 140 120 120 Rectangle 100x200 100x150 100x150 Speed: 2800 rpm Infinitely adjustable feed speed External dimensions W x D x H: 85 x 105 x 145 cm Weight: 350 kg Accessories: Discharge length stop with roller conveyor ST 260 roller width 260 mm, made of plastic, 4.0 m

Condition: used, Year of construction: 2008, Travel distances: X axis = 350 mm Y axis = 250 mm Z axis = 220 mm incl. cooler Fully functional Hfodpfx Agow Swd Aj Nen

Year of construction: 2016, condition: ready for operation (used), General Data Measurements width 2435 mm Measurements depth 2335 mm Measurements height 2635 mm Machine weight 4020 kg Movement X-Axis Movement 600 mm Y-Axis Movement 400 mm Z-Axis Movement 400 mm Workpiece Hsdpfjxnr Ndex Ag Nsfn Workpiece weight 1000 kg Media Air pressure 0.65 MPa Additional Equipment Features: 10-year warranty on positioning accuracy, LN Professional, Cooling unit for linear motor, Glass scales (X, Y, Z axes), Remote control, USB port, Shuttle ATC, C-axis (SEC-10), SGF generator unit, 15" TFT touchscreen, Dielectric cooling unit, Automatic voltage stabilizer, Paper filters (2), Fire extinguisher, Mouse, LAN port, Work lighting This Sodick AD 55 L die-sinking EDM machine was manufactured in 2016. It features a work tank with internal dimensions of 1200 x 800 x 500 mm and a capacity of 470 liters, supporting a maximum workpiece weight of 1000 kg. Equipped with a cooling unit for the linear motor, a C-axis, and a SGF generator unit, it offers robust performance for precision applications. Contact us for more information about this machine. Application Types EDM

Condition: used, functionality: fully functional, Mobile screening plant on 2-axle trailer Feeder with tipping grid Double-deck screen box Hodpfxexbriwo Ag Nofn 3 discharge belts with shredder Deutz diesel engine 5,115 hours

Condition: used, Year of construction: 2022, operating hours: 13,500 h, functionality: fully functional, nominal power: 50 kW (67.98 HP), For sale is an HKA 49. Included are the wood gasifier, the CHP unit (BHKW), the Energy Block housing the system, and the feed screw including the complete room discharge system. Hjdpfjw Spiqsx Ag Nefn

Condition: new, Year of construction: 2022, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, NEW / UNUSED CIMC tank container, SUITABLE FOR BOTH FOODSTUFF AND CHEMICALS 20FT ISO Tank Container 25,030L / Single-compartment L4BN T11, UN PORTABLE Steam heating Bottom discharge Design temperature: -40/+130°C Valid 2.5T + CSC inspection: 01/2027 Multiple units available = More Information = Hfodpfjuumtqsx Ag Non General Information Year of manufacture: Jan. 2021 Model year: 2022 Weights Tare weight: 3,600 kg Payload: 32,400 kg GVW: 36,000 kg Functionality Cargo capacity: 25,000 l Superstructure brand: CIMC ONE WAY 20FT, 25,000L tank container, L4BN, UN Portable, T11 Number of compartments: 1 Condition Overall condition: very good Technical condition: very good Visual condition: very good For further information, please contact Arne Honingh or Piet Swank.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, INDEX MS40-6 CNC Multi-Spindle Year of Manufacture: 2011 Commissioned: 2012 Control: Siemens 840D (Dual NCU) Bar Capacity: 40 mm Slide Units Position 1.1: X / Z NC controlled Position 1.2: X / Z NC controlled Position 2.1: X / Z NC controlled Position 2.2: X / Z NC controlled Position 3.1: X / Y / Z NC controlled (Y ± 21 mm) Position 3.2: X / Z NC controlled Position 4.1: X / Z NC controlled Position 4.2: X / Z NC controlled Position 5.1: X / Z NC controlled Position 5.2: X / Z NC controlled Position 6.1: X / Z NC controlled Position 6.2: X / Z NC controlled Position 6.3: X NC controlled, Z fixed Bar Feed IEMCA SIR MS40/33/P magazine bar loader Workpiece Handling Parts chute at spindle position 6 Hfedpfx Agjxndgzj Non Workpiece conveyor at spindle position 6 Synchronization unit at spindle position 6.1 Parts ejector Coolant feed preparation through counter spindle Back-Working Attachment at slide position 6.2 Up to 3 fixed toolholders Auxiliary Drive Preparation Electrical preparation for 2 auxiliary drives with electronic shaft (positions 1–3), synchronous with main and counter spindle Electrical preparation for 2 auxiliary drives with electronic shaft (positions 4–6), synchronous with main and counter spindle Compatible with auxiliary drives with incremental encoder (double module) Chip & Coolant System Hinge-belt chip conveyor (cross type), discharge height 1200 mm, front discharge with lift pump for filter unit Coolant filtration unit (50 Hz): Coolant tank: 800 L Vacuum rotation filter: 650 L capacity Plate heat exchanger for coolant cooling Heat exchanger pump: 80 L/min 7 bar Low-pressure pump: 300 L/min 4 bar High-pressure pump: 55 L/min 40 bar Safety & Environmental Automatic CO₂ fire extinguishing system with optical/thermal detection Preparation for central exhaust system Shut-off flap for central oil mist extraction Control Options & NC Functions 16/16 freely programmable I/O interface Transmit / Tracyl function (milling cylindrical paths on OD and face) Dual transmit function for Y-axis transformation NC option: counter spindle / polygon turning with electronic shaft Process Monitoring Integrated ARTIS monitoring system based on torque, current, or power evaluation Up to 4 channels (max. 8 drives) monitoring 4 tools simultaneously at stations 1–3 Up to 4 channels (max. 8 drives) monitoring 4 tools simultaneously at stations 4–6

Condition: used, Year of construction: 1996, table length 800 mm table width 500 mm ampere 45/80 A total power requirement 18/21 kW Hodpfx Agexmtu Sj Njfn weight of the machine ca. 3,7 t

Condition: ready for operation (used), Year of construction: 2018, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: W09368333J2D38007, conveyor belt length: 8,500 mm, conveyor belt speed: 2,000 mm/s, conveyor belt width: 1,200 mm, roller length: 3,000 mm, number of rollers: 1, TECHNICAL DETAILS Discharge Conveyor Width: 1,200 mm Length: 8,500 mm Belt Speed: 2.0 m/s Discharge Height: 5,050 mm Feed Hopper Loading Height: 3,307 mm Roller Number of Rollers: 1 Roller Length: 3,000 mm Maximum Roller Speed: 32 rpm Permissible Gross Weight: 33,000 kg MACHINE DETAILS Hjdjxny E Hopfx Ag Nofn Dimensions & Weight Operating Dimensions (L x W x H): 16,786 x 2,500 x 5,050 mm Transport Dimensions (L x W x H): 9,971 x 2,500 x 3,893 mm Total Weight: 32,000 kg Drive Engine Type: Diesel engine Brand: MTU 6R 1300 Emissions Standard: Stage V Rated Power: 390 kW / 530 HP Tank Capacity: 950 l Operating Hours: 5,000 h EQUIPMENT Overband Magnet

Condition: new, The Neospark T 500 is an advanced Wire Cut EDM machine from the renowned brand KNUTH, known for its precision and efficiency in electrical discharge machining. This high-performance machine is ideal for companies specializing in mold and tool making, providing exceptional cutting capabilities for electrically conductive materials, especially when separating 3-D printed components from their base plates. The Neospark T features a rigid cast-iron frame with precision-machined surfaces, ensuring permanent mechanical precision through its advanced linear guides and preloaded ballscrews on all axes. Operating costs are notably low thanks to its cost-effective design, while the user-oriented IPC-based 4-axis control system enhances process reliability. Moreover, it includes a specialized aluminum cutting function that extends wire life and minimizes the risk of breakage during machining. With features like a central lubrication system, easy setup via handheld controls, and integrated CAD/CAM software, the Neospark T 500 is a robust choice for professionals seeking efficient and reliable Wire Cut EDM solutions. To explore this product further, request a quote today. Hfedpfowt Du Ssx Ag Nen

Condition: used, mileage: 129,358 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,500 kg, first registration: 06/2018, emission class: euro6, color: white, tire size: 225/65R16C, Equipment: ABS, central locking, cruise control, immobilizer system, onboard computer, Features - Radio - Cruise control - Power steering - Electric windows - Electronic immobilizer - Central locking with remote control - On-board computer - Reversing camera - Anti-lock braking system (ABS) - Traction control system (ASR) - Electric window lifters - 6-speed manual transmission - Soot particulate filter Structure Aerial work platform France Elevateur 142 TPFc - Working height: 13.8 m - Side reach: 7.3 m - Basket load capacity up to 265 kg - Remote control - Engine start/stop function - Emergency pump - Hour meter - 2 x A-type supports - Indicator light for transport position in the driver’s cab Hfodpfxov Hzvne Ag Nen - Work basket (L/W/H) 1300 x 750 x 1190 mm - Slewing angle 400° - Basket arm turning angle 140° - One-hand joystick, proportional control of the hydraulic movements in the work basket - 2 x 60° electric basket rotation - Acoustic tilt warning system - Strobe lights - 230V connection in the basket - Power inverter The separator manages the energy flow between the batteries by automatically connecting them during charging and disconnecting them when the voltage drops, in order to protect the system from excessive discharge. Thanks to microprocessor-controlled technology, voltage losses are minimized, and the device can be installed without changes to the electrical system. ACR-Juretzki Nutzfahrzeughandels GmbH – Your reliable partner for used commercial vehicles All vehicles offered by us are owned by ACR-Juretzki Nutzfahrzeughandels GmbH. Presentation takes place exclusively with original photos taken directly in-house – this guarantees complete transparency regarding the actual condition of the vehicle. Our vehicles undergo comprehensive refurbishment in our own specialist workshop before sale – including mechanics, bodywork, and painting. They are thus optimally prepared for the next technical inspection. We also guarantee the authenticity of the mileage stated. Trust is good – control is better: Upon request, the vehicle can be inspected by independent testing organizations such as TÜV, DEKRA, or KÜS – also as part of a remote inspection. Our service offer for you: Delivery of your vehicle to the location you desire Complete processing of export formalities, incl. export license plates Individual financing and leasing offers Trade-in of your current vehicle Installation of special equipment as requested Are you looking for something specific? If you do not currently find a suitable vehicle for your company in our stock, please contact us – we are happy to help you further. For technical details, further photos, or a personal consultation, we are always at your disposal. All prices stated are net prices. The contents of our website have been created with great care and are regularly updated. Nevertheless, they serve solely for general information and do not replace individual advice. Only the details in the purchase contract are binding. Subject to changes, errors, typos, and prior sale.

Condition: used, Year of construction: 2011, equipped with: 5 transfer carriages in aisles 1-5, 2 material feed lines via roller conveyors, feed line via linked conveyor belt, transfer carriages, belt-driven, with cantilever in rake design, movable in X-/Y-/Z-axis, 2 lateral vacuum stacking and destacking stations, discharge belt Hfodpfx Asxnadpjg Njn

Condition: used, Used rubber belt for discharge conveyor of LINDNER Urraco 96 DK. Hfodoxg N Rvepfx Ag Non Condition: see current photos.

Condition: used, Year of construction: 2000, table length 350 mm table width 220 mm ampere 18 A Hedpfexmk Hljx Ag Njfn Control FANUC 18i

Condition: excellent (used), Year of construction: 2010, operating hours: 56,748 h, functionality: fully functional, overall weight: 5,400 kg, rotor width: 1,600 mm, power: 45 kW (61.18 HP), rotational speed (max.): 107 rpm, rotor flight circle: 380 mm, working width: 1,600 mm, blade width: 40 mm, Technical data shredder: Manufacturer ZENO Zerkleinerungsmaschinenbau Norken GmbH Type ZTLL 1400 x 1600 Year of construction 2010 Operating hours 56,748 hours Inlet cross-section 1400 x 1600 mm Main drive power 45 kW Rated current 81 A Hydraulic slide gate drive 2.2 kW Rotor flight circle 380 mm Rotor speed approx. 107 rpm Number of cutting tools 52 knives, 40 x 40 mm, with tool holders Screen perforation 40 mm Weight approx. 5400 kg Hedpfx Aeu Thabog Njfn Scope of delivery: Only the shredder with control cabinet is for sale. The discharge conveyor belt and the air conveyor system are not included in the scope of delivery. Remark: The shredder was used for shredding nonwovens and needle felts etc. and is in good, immediately usable condition. The machine is being replaced by a larger shredder due to its low throughput capacity. The machine is currently still assembled and can be inspected under power. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, The ZNC 435 L is a high-performance die sinking EDM machine from KNUTH, ideal for the Die Sinker EDM category and a robust choice within the EDM Machines product group. This model is designed specifically for mold and tool making, providing exceptional precision and surface quality for reproducing injection molds and matrices. Its user-friendly CNC control streamlines the selection of work parameters, while the machine frame, rooted in extensive manufacturing experience, ensures durability and reliability in continuous operations. Preloaded ball screws on all axes guarantee low maintenance and high precision, with a focus on constant temperature conditions to minimize friction, thereby enhancing overall machining performance. The compact design is perfect for small part machining, and users will appreciate the integrated diagnostic system. You can easily store machining parameters for specific operations directly in the control panel. For a dependable and economical solution in electric discharge technology, request a quote for the ZNC 435 L today. Hfedpou E Ildefx Ag Nsn

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates the buyer to collect the machine within the period from 01/12/2025 to 05/12/2025! TECHNICAL DETAILS Hjdoxnkblepfx Ag Nsfn Travel X-axis travel: 500 mm Y-axis travel: 350 mm Z-axis travel: 300 mm Work Table Table dimensions: 780 mm x 630 mm Table load capacity: 1,500 kg Taper: 10° / 150 mm U/V-axis travel max.: 30 mm Maximum workpiece dimensions: 1,050 mm x 800 mm x 295 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,800 mm x 2,460 mm x 2,100 mm Weight: 3,500 kg

Year of construction: 2021, operating hours: 2,482 h, condition: ready for operation (used), Main Drive Number of axis 2 Hfsdpfjxgkdwjx Ag Nen This AgieCharmilles CUT E 600 was manufactured in 2021. A reliable wire EDM machine, it offers precision and efficiency for your machining needs. Consider the opportunity to buy this AgieCharmilles CUT E 600 wire edm machine. Contact us for more information. Application Types EDM

Year of construction: 2013, condition: used, Technical data of the bale opener line for RDF. MSW, paper, cardboard: Manufacturer Cross Wrap Oy Ltd, Siilinjärvi, Finland Type BO 4000 Year of manufacture 2015 Quantity of opened bales 674 pieces Operating time only 3 days, exclusively by running in the entire line during new installation Opening time approx. 45 seconds per bale Bale dimensions (W x H x L) 1100 x 1100 x 1400 - 1900 mm Max. Bale weight 2,000 kg Conveying height of the system 1,400 mm Max. Conveying width of the system 1,200 mm Material to be opened RDF/MSW Availability of the line 98% Noise level of the bale opener line 85 dB(A) Total connected load 37 kW Rated current 125 A Operating display SIEMENS SIMATIC HMI Touch Control SIEMENS S7 ET200S Installation dimensions 8,463 x 2,890 x 3,960 mm (l x w x h) Scope of delivery: Feed conveyor 3,500 x 1,200 x 1,400 mm Feed conveyor to opener 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in hydraulic oil tank Heating in control cabinet Oil cooler in Hydraulic unit Explanation of the short period of use: The entire line of Cross Wrap bale openers type BO 4000 was installed at a municipal waste incineration plant in 2015. The background to the installation was that in the case of a malfunction or maintenance of the incinerator, the municipal waste could continue to be received, baled, wrapped and stored until the malfunction was cleared. Then the bales should all be opened again and the waste fed into the normal incineration process. This worst-case scenario never came to pass. The plant was set up, run in and then never used in regular operation. Only during the commissioning and running-in of the entire plant in 2015 were 674 bales opened on three days. The plant is in very good condition and ready for operation immediately. Due to reconstruction measures in the incineration plant, the installation area of the bale opener was needed. As a result, the entire line is for sale. Hfsdpou Tg I Dsfx Ag Non Short description of the wrapping process: The pressed bales are placed on the infeed conveyor belt from the side or from behind by means of a forklift truck. For opening, the bales must run horizontally to the conveyor belt with the wire or twine binding, otherwise the bales must be turned 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or twine strapping. The front and rear rotating knives slit the bale lengthwise. Afterwards, the gripper returns to the starting position. The opened bale is now conveyed via the conveyor belt to the discharge chute and then falls onto the following conveyor system. Comments: New price of the completely plant 296.000,- €. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) is complete. The unit has been dismantled into freight-manageable units, stored and is available for inspection and loading at short notice. We do not accept any liability for the technical details or any errors.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 11,560 h, functionality: fully functional, workpiece weight (max.): 500 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 220 mm, No minimum price – guaranteed sale to the highest bidder! Payment deadline for the machine is 20/11/2025! Placing a bid commits you to collect the machine within the scheduled period from 01/12/2025 to 05/12/2025! TECHNICAL DETAILS Hjdsxni T Hspfx Ag Nsfn Travel distances: X-axis travel: 350 mm Y-axis travel: 250 mm Z-axis travel: 220 mm U-axis travel: +/- 32 mm V-axis travel: +/- 32 mm Max. workpiece dimensions: 800 x 600 x 215 mm Max. workpiece weight: 500 kg Worktable dimensions: 590 x 514 mm Rapid traverse rate of worktable: 1,300 mm/min Electrode wire diameter: 0.1–0.3 mm Max. wire feed speed: 23 m/min Electrode wire tension: 0.5–25 N Max. taper angle: 15° (at 100 mm workpiece height) MACHINE DETAILS Dimensions & Weight: Dimensions (L x W x H): 2,500 x 2,100 x 2,100 mm Weight: 2,000 kg Operating hours: Machining time: 11,560 h Control total on-time: 65,288 h

Year of construction: 2006, condition: ready for operation (used), Control Unit Brand MAKINO Main Drive Number of axis 3 Additional Equipment Including EROWA loading robot with 120 pots This 3-axis Makino EDNC 43T was manufactured in 2006. It includes an EROWA loading robot with 120 pots, ensuring efficient die-sinking EDM operations. Consider the opportunity to buy this Makino EDNC 43T die-sinking EDM machine. Contact us for more information. Application Types Hfedpfjxgkb Nex Ag Non EDM

Condition: used, Technical data PaperSpike 2 G: Manufacturer Grumbach und Petermann GmbH Type 2500 Year of construction 2019 Dimensions accelerator belt 3,000 x 2,980 x 600 mm (l x w x h) Weight 1,100 kg Dimensions PaperSpike sorting unit 2,480 x 2,982 x 1,805 mm (l x w x h) Weight 3,100 kg Dimensions PaperSpike 2G complete 5,450 x 3,480 x 1,805 mm (l x w x h) Weight 4,600 kg Dimensions paper discharge conveyor 3,400 x 1,200 x 650 mm (l x w x h) Weight 400 kg Electrical equipment of the entire system: Voltage 380 - 420 V Connected load 9.5 kW Current consumption 20.34 A Operating principle: The material is fed in as dry and thin a layer as possible, preferably a monolayer, evenly over the entire width on the accelerator belt. The sorting roller with the spikes pulls the mixed paper from the chute, while cardboard boxes are impaled and held by the spikes. Material (paper) with low stiffness (newspapers, magazines, brochures, etc.) is not held by the spikes and falls into a paper bunker or onto a discharge conveyor after the chute. The spiked cardboard boxes are knocked off the sorting roller by the knock-off shaft and then fall onto the cardboard removal belt or into a separate bunker. Throughput capacity: Depending on pre-sorting, the nature of the feed material and machine settings, between 10 and 12 tonnes per line, per hour can be processed. Hodpou Tg Sijfx Ag Nefn Scope of delivery: 2 pieces PaperSpike 2G incl. 2 geared motors 2 pieces accelerator belt incl. gear motor 2 pieces paper discharge belt incl. gear motor (The cardboard discharge belt is not for sale and is therefore not included in the delivery! There are two lines available for sale. Depending on the customer's request, either one unit or both units together are sold. The sales price always applies to one unit. Comments: The plants are expected to be dismantled by the end of October and will then be ready for loading. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: not inspected (used), Year of construction: 2003, functionality: unexamined, machine/vehicle number: 2228, travel distance X-axis: 310 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 270 mm, table load: 500 kg, controller model: MF 10-SE, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distances and axes Travel distance - X: 310 mm Travel distance - Y: 270 mm Travel distance - Z: 270 mm Travel distance - C: ∞ Active axes: X, Y, Z, C Workpiece and working area Workpiece clamping plate: 550 × 350 mm Grid - T-slot: 80 mm Work tank (L × W): 770 × 520 mm Fluid height: max. 310 mm Table load: max. 500 kg Electrode weight: max. 5 kg Control and generator Pulse generator: EroForm 60 A Controller: MF 10-SE Filtration system and dielectric fluid Filtration system: none Filling volume: approx. 400 l Hfedjxnbbvepfx Ag Nen Software data Software version: V2.24 PLC version: V0393 Drive software version: V310 MACHINE DETAILS Machine weight (incl. dielectric fluid): 2,000 kg Weight generator/controller: 300 kg (included in machine weight) EQUIPMENT EROWA ER-007521 clamping system 4-position pick-up changer Fork type H5.62.11 Automatic polarity switching DVM quick-fill valve PLC CPU type 725 Machine prepared for connection to 313 Flushing distribution (manual) Kissling limit switch array Onboard tooling Central lubrication Bielomatik AB-H (manual) Hirschmann C-axis H8.26ILAC50.1 Temperature monitoring inactive CO₂ fire extinguishing system, 5 kg, K&B No. 03476, FB 703

Condition: used, Technical data IFE cascade screens (vibrating waste screens): Hedpfx Agou Tg Rro Nefn Manufacturer IFE Aufbereitungstechnik GmbH, Austria Type SM 2400 x 5000 F - UW30 Year of construction 2009 Drive motor 22 kW Rated current 43 A Screen dimensions overall 5,000 x 2,400 mm (l x w) Dimensions of individual sieve segment 950 x 800 x 130 mm (l x w x d) Screen hole grid 150 x 125 mm Length of screen fingers (steel tubes in front of the screen segments) 400 mm Swing width max. 18.5 mm Weight approx. 6,600 kg Possible applications: The waste screen is suitable for use in plants for sorting household waste, commercial and industrial waste, paper and cardboard, scrap metal and electrical waste. Blockage-free screening with the most difficult feed materials, with high throughput capacity, no pigtail formation with oversize particles, loosened oversize particle discharge over the entire screen width and no downtimes for screen cleaning are the greatest advantages of this plant technology. Remark: The screen plates / screen segments have been covered with steel plates without a screening function over the course of time for use in the paper sorting system. The steel plates are only attached and can be removed again. Remarks on the overall layout: Technical documentation for the machine is only available in German. An inspection of the machine is possible by arrangement. We do not accept any liability for the technical data or any errors.