Used End Machining for sale (67,057)

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 29 h, roller diameter: 90 mm, sheet thickness steel (max.): 2 mm, overall weight: 520 kg, power: 1.1 kW (1.50 HP), working length: 1,270 mm, For sale is a like-new circular bending machine with only 29 operating hours! TECHNICAL DETAILS Gkedpfx Ao Aiuyxokhjd Working area Working length: 1,270 mm Sheet thickness at 450 N/mm²: max. 2.5 mm Sheet thickness at 700 N/mm²: max. 1.5 mm Sheet thickness for conical bending of steel sheets: 2 mm Roller diameter: 90 mm Roller speed: 6 m/min Diameter of feed grooves: 4 / 6 / 9 mm MACHINE DETAILS Motor power, main drive: 1.1 kW Dimensions & Weight Dimensions (L × W × H): 1,850 × 700 × 1,200 mm Weight: 520 kg EQUIPMENT 3-roller circular bending machine with asymmetrical roller arrangement Sturdy machine frame made of spheroidal cast iron Induction-hardened rollers, also suitable for processing stainless steel Main motor with braking system for precise bending Swiveling top roller with eccentric closure for easy workpiece removal Wire feed grooves on the lower and rear rollers Conical bending device Manual adjustment of the rear roller Separate mobile control panel with foot switch for left/right operation Emergency stop safety cord Side cover Operating manual

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, overall weight: 6,300 kg, roller diameter: 250 mm, working length: 3,100 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bending length: approx. 3,100 mm Gksdpfs Ahg T Hox Akhod Roller diameter: approx. 250 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,000 x 1,800 mm Total weight: 6,300 kg

Condition: used, Roundo PS340 3000 mm Hydraulic Double-Pinch Plate Bending Rolls Manufacturer: Roundo AB Model: PS340 Year: 1983 Country of manufacture: Sweden Type: Hydraulic three-roll double-pinch plate bending rolls Capacity Maximum working length: 3,000 mm Pre-bending capacity: approximately 12 mm mild steel aximum rolling capacity: approximately 18–23 mm mild steel, depending upon finished diameter Standard upper-roll diameter: 340 mm Plate capacities based upon mild steel of approximately 270 N/mm² yield strength Minimum rolling diameter: approximately 1.1–1.4 times the upper-roll diameter, depending upon material thickness Gkjdozuzpyspfx Akhod Remaining straight edge after pre-bending: approximately 1.5–2 times plate thickness Features Hydraulic double-pinch design Both lower rolls independently hydraulically adjustable Pre-bending of both ends without removing and reversing the plate Hydraulic rotation of all three rolls Infinitely variable rolling speed Hydraulic powered drop end Portable pendant control Front safety trip bar Heavy-duty fabricated and stress-relieved frame Forged and crowned steel rolls Rolls mounted in heavy-duty roller bearings Suitable for cylindrical and conical bending Approximate machine weight: 14,000–15,000 kg, subject to confirmation Approximate main motor: 22 kW, subject to data-plate confirmation

Condition: used, Year of construction: 1994, spindle diameter: 50 mm, spindle speed (min.): 6,000 rpm, We offer a used WEINIG Univar 10/2 profiling and rabbeting machine, primarily designed for rabbeting windows, doors, and similar profiles. The machine is equipped with two hydraulically controlled, right-hand precision spindles that can be raised and lowered, allowing for the clamping of three sets of tools on top of each other. The lifting mechanism uses a U-shaped motion, enabling the machining of short workpieces. The individual tool positions can be finely adjusted in the radial direction. Gkodo Aguv Ejpfx Akhsd To ensure high-quality machining without material tear-out, the first spindle allows the selection of either a left-hand or right-hand rotation direction. It is equipped with a mechanical brake for changing the direction of rotation. During the machining of the last 100 mm of each frame end, the spindle plunges into the wood with the corresponding matching tool, thereby reducing material tear-out in the corners of the frame. The construction also includes an additional support rail for large-format frames. Technical equipment and functions: * 2 hydraulically controlled, right-hand precision spindles that can be raised and lowered * Ability to clamp 3 sets of tools on top of each other * U-shaped lifting mechanism for machining short workpieces * Fine radial adjustment of individual tool positions * Central lubrication of spindle units * Selection of left-hand and right-hand rotation for the first spindle * Mechanical brake for changing the direction of rotation * Additional support rail for large-format frames * Continuous, chainless feed using rubber-coated rollers with a very short pitch * Height adjustment of the feed beam using a ratchet * Program control with a selector switch for a single program * Automatic change of stroke for two workpieces in the tenon-rabbet section * Ability to program up to 4 workpieces, or 4 sides, for longitudinal profiling and rabbeting The machine does not include machining tools.

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, Concrete rebar bending machine / Bending machine B 50 – Exhibition model COMPLETE TECHNICAL SPECIFICATIONS – SEE PHOTO Gedpozvy S Nsfx Akhokd - CE marking - Incl. bending pins / stop / bending sleeves - Safety guard / end switch activated - Bending capacity max. 50mm / diameter (single bar) - Foot switch - Complete documentation - Bending via program or individual bends Dimensions: L x W x H 1.3 x 0.9 x 1 meter / Weight 600 kg Errors and omissions excepted.

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, actuation type: hydraulic, The Baileigh Industrial R-H85 is a heavy-duty, industrial-grade hydraulic double-pinch roll bender designed for precision metal fabrication. It is engineered to minimize material waste and deliver highly accurate, repeatable bends for high-capacity applications. Core Specifications & Capabilities Godpfx Aszn Rdmekhskd Bending Capacity: Capable of handling up to 3″ Schedule 40 pipe and 3-3/8″ x 3-3/8″ x 1/4″ angle iron. Double-Pinch Design: Features a fixed top roll and two lower rolls driven by independent hydraulic cylinders. This setup allows for pre-bending and post-bending, minimizing the unbent straight sections at the edges of the material to reduce scrap metal waste. Driven Rolls: Equipped with an industrial-grade hydraulic transmission that powers all 3 rolls at a speed of 5.2 rpm. Versatile Operation: The machine can be adjusted to operate in either a vertical position for smaller diameters or a horizontal position when rolling larger radii. Key Features Precision Control: Includes a portable operator pedestal housing an integrated digital readout (DRO). Encoders communicate with the DRO for exact positioning of the lower rolls, and programmable stops ensure easy repeatability across large production runs. Anti-Twist Lateral Guides: Features hydraulically powered lateral angle guide rolls that keep structural shapes properly aligned and prevent twisting during the bending process. Segmented Tooling: Comes standard with hardened tool steel, segmented drive rolls that can be reconfigured to match various material sizes and shapes. Heavy-Duty Build: Constructed from heavy steel plate that is both bolted and welded to eliminate framework flex even when operating at maximum capacity.

Condition: good (used), You are bidding here on a branded guillotine shear and a folding machine from the well-known German manufacturer Schechtl. Gkodpfx Akoyviwqohsd Device features: - Guillotine Shear MSB 200: - Cuts 3 mm steel – significantly more for aluminum - Cutting length: slightly over 2 m - Front support table - 500 mm back gauge - Optional sheet metal tray - Free loading available - Folding Machine Schechtl MAX 200: - Rail bends cleanly – test possible - Degree indicator - Bending length: slightly over 2 m - Sheet thickness: 2.5 mm (steel, sheet metal, aluminum, zinc, etc., higher for softer materials) - Standard rail – special radius rails for aluminum and zinc available upon request (add-on and special rails) - Foot pedal operation - Optional back gauge We also have available: Schechtl MSB 200, Schechtl MA 200, Schechtl HA 200 (2 mm), segmented RAS 2 m / 2 mm, and many others from 1 to 6 m. You will receive an invoice with VAT shown separately. Shipping can be arranged upon request. Free loading as shown in the pictures. Inspection and testing possible by prior phone appointment. Payment in cash upon collection – if you need anything else, please give me a call. Thank you! Collection should take place within 8 days after the end of the auction. Location: 97249 Eisingen (3 minutes from the motorway) Item numbers: 251007 and 251008

Condition: used, Year of construction: 1996, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, RILECART PB796 Calendar and Wire-bound Book Binding Machine Binding Size: 600 x 700 mm Fully automatic calendar punching and binding line. Automatic calendar hanger insertion. Max Punching Thickness per Stroke: 4,5 mm (depending on pitch, material and width), Standard Binding Dia: 1/4" & 5/16", Standard pitch 3:1", Gkjdpfsz E S I Sox Akhjd Variable speed: 500 to 2300 pieces/hour, depending on size, thickness and quality of materials. Complete with exit conveyor. Mechanical Condition: Very Good Power requirements: 400 V, 3-phase. External air supply required. Delivery and installation service available. (POA)

Condition: good (used), functionality: fully functional, Hydraulic tube end forming machine BLM (Italy) for tubes, Gkedpfx Aezzwpvekhod up to 6 tools (5 follow-up tools) can be interchanged for forming Drive power: 7.5 kW Max. tube diameter: approx. 40 mm Max. forming length: 100 mm Weight: approx. 1.4 tons

Condition: used, Year of construction: 2016, total width: 2,500 mm, total length: 4,500 mm, total height: 2,300 mm, overall weight: 9,000 kg, LARU DHZ 02/1200 DD End Processing Machine Technical Data: - Multi-spindle 3 x 3 - Between centers 1200 mm - Centering - Drilling - Thread cutting - Cooling system - Chip conveyor - Hour counter 25517 H Gsdpfez E T Tvjx Akhjkd Weight approx.: 9,000 kg Control: Sinumerik 840 D SL Dimensions (LxWxH) approx.: 4500 x 2500 x 2300 mm Powered tools: Yes Year of construction: 2,016 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: No

Condition: excellent (used), You are bidding here on a branded guillotine shear from the well-known German manufacturer Schechtl, in absolutely top condition! Device features: - Shear model: MSB 200 - Cutting capacity: see nameplate, up to 3mm steel – significantly more for aluminum - Working length: just over 2 meters - Manual back gauge: 500 mm - Side / angle gauge - Foot pedal operation - Weight approx. 1.3 t - Schechtl MSB 200 - Bending length: just over 2 meters - Sheet thickness (steel): 3 mm – significantly more for aluminum and zinc - The machine was used extremely rarely, approx. 1-2 times per month for thin sheets at a lamp manufacturer - It shows hardly any signs of use; this condition is rare - The total price is less than half the current new price – the price list is from last year! If you have any questions, feel free to call briefly. Gedowfzztopfx Akhjkd We have this set twice, as well as other models such as the Schechtl MAX 200 (2.5mm) or MA 200 (2mm). The current net new price for both machines can be seen in the photos. You will receive an invoice with VAT shown separately. I can arrange shipping by freight forwarder if desired; a forklift is available. Free loading as shown in the pictures. Inspection and testing are possible by prior telephone arrangement. Payment in cash upon collection – if there is anything else I can do for you, please call me briefly – thank you. Collection should take place within 8 days after the end of the auction. Item number:

Condition: good (used), functionality: fully functional, Year of construction: 2009, pipe diameter (max.): 60 mm, pipe length (max.): 6,000 mm, bending radius (max.): 200 mm, bending radius (min.): 35 mm, overall weight: 4,400 kg, input current: 63 A, input frequency: 50 Hz, Equipment: CE marking, documentation/manual, emergency stop, We are offering this used Dynobend DB60 tube bending machine, manufactured in 2009. Manufacturer: Dynobend Type: DB60 Machine number: 2009-11-B789 Year of manufacture: 2009 Weight: 4,400 kg Voltage: 230/400 V Frequency: 50 Hz Connected load: 40 kVA Maximum current: 63 A Great opportunity from a single owner: High-quality mandrel bending machine Dynobend DB-60 including a €70,000 tool package. For sale is a powerful and precise mandrel bending machine, type Dynobend DB-60, manufactured in 2009. The machine was purchased new directly from the manufacturer and has been in our possession ever since. It has been regularly maintained. It bends predefined designs fully automatically and reliably. The absolute highlight: Huge tool package included! The machine comes with an extremely comprehensive package of 18 different tool sets for round tubes ranging from Ø 17.2 mm to Ø 60.3 mm. The new price for these tools alone was approximately €70,000. This means you will be ready for an extremely wide range of tube processing applications immediately. Technical highlights & scope of performance: Godpj Ahiuaefx Akhskd • Maximum tube length: up to 6,000 mm can be processed. • Intelligent control: The calculation of all required bending parameters is carried out according to the X-Y-Z coordinate system with convenient input via the touchscreen. • Bending radius: The largest possible neutral bending radius is at least 200 mm. • Condition & maintenance: Good, used condition. The machine has been regularly maintained directly by Dynobend; any necessary wear parts have been replaced promptly when needed. • Usage note: The fully automatic bending process depends on the minimum straight intermediate length between two bends as well as the overall design (with regard to potential collisions with the machine/floor in complex shapes). Important technical note: The laser scanner of the safety system has already been replaced, but it is currently not functioning correctly. The customer may need to take remedial action or make improvements. Complete documentation available: The machine will be delivered with all important and legally relevant documents: • EC declaration of conformity (Directive 98/37/EEC, Annex II A) • Original acceptance test report • Complete original operating manuals (pneumatics, hydraulics, electrical system, Sick laser scanner, program manager, and user manual) • All descriptions and maintenance invoices are available and can be disclosed. Inspection & demonstration welcome: Come and see for yourself! The bending machine is currently powered up and fully functional. After prior arrangement, we will be happy to demonstrate the machine in operation. Sales and delivery conditions: • Price: On request / negotiable. • Delivery condition: Ex works (EXW). • Logistics: The dismantling, the proper loading, and the removal must be organized by the buyer or carried out by a commissioned shipping company. Subject to prior sale. Take advantage of this opportunity for an immediately ready-to-use professional machine with enormous accessory value. We look forward to hearing from you and arranging an appointment for an inspection!

Year of construction: 2000, condition: good (used), Offered for sale from an insolvency proceeding is a tube end machining machine. Gksdpfxofynfws Akhod Manufacturer unknown Model: ?? Year of manufacture: ?? Machine number: ?? Technical data: Operated with compressed air Tube diameter up to 401 mm possible Accessories as shown in the picture

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: E212514, total width: 240 mm, total height: 120 mm, spindle speed (min.): 4,000 rpm, spindle speed (max.): 7,000 rpm, overall weight: 300 kg, rotational speed (max.): 7,000 rpm, rotational speed (min.): 4,000 rpm, input voltage: 400 V, Equipment: rotational speed infinitely variable, Soundproof automatic end milling machine. Gkjdez Ii Uujpfx Akhed Adjustable feed rate and rotation speed. -45° to 45° end milling by adjusting the stop. Easy and quick blade changes thanks to pneumatic quick-release coupling. Includes 4 spindles with 12 accompanying blades. In very good condition.

Condition: used, sheet width 3000 mm plate thickness 6 mm Gedpfx Ao Ahkinokhekd pre-bending 4 roll diameter 205 mm total power requirement 5 kW weight of the machine ca. 3,7 t dimensions of the machine ca. 4,0 x 1,4 x 1, 5 m Roundo 3-roll plate bending machine, featuring: - Hydraulic drop-end bearing and remote control - Conical bending attachment: a device for rolling cones and funnels.

Condition: ready for operation (used), functionality: limited functionality, Year of construction: 1988, pipe diameter (max.): 60 mm, bending angle (max.): 186 °, bending radius (max.): 220 mm, bending radius (min.): 30 mm, total length: 4,900 mm, total width: 1,100 mm, total height: 1,250 mm, input voltage: 380 V, Equipment: documentation/manual, emergency stop, foot remote control, Title: Mandrel Bending Machine IBP Pedrazzoli UNI-60 – €2,000 (negotiable) (Large, comprehensive 161-piece tool set available as an option) Description: For sale is a robust IBP Pedrazzoli UNI-60 mandrel bending machine (semi-automatic) manufactured in 1988. The machine was originally purchased by us and has been in continuous use ever since. The economic highlight: 166 optional tool sets (original net price approx. €150,000). The true value of this offer lies in the enormous, durable tool inventory. The tools have a long service life. Even if you switch to a newer machine in the future, you will secure an invaluable foundation for your production. The bend quality depends on the material, outer diameter of the tube, wall thickness of the tube, and bending radius. • Additional price for tool set: €29,500 (net) • Scope: Tools for round tubes, flat steel, square & rectangular tubes, as well as round tubes (up to max. Ø 60.3 x 3.6 mm, S235) as per the attached list. • Documentation: Drawings for the basic mounting dimensions (clamping jaws, sliding rails, bending dies) are complete and available. _____ Technical Data & Machine Capacities: Gjdpfx Ae Aig Hvskhjkd • Manufacturer / Type: IBP Pedrazzoli UNI-60 (semi-automatic) • Machine number: 7.2230333 | Serial number: 881124 | Certificate: 1430 • Tool holder (shaft diameter): Standard 50 mm (an alternative 32-mm shaft is available for tight radii) • Tube feed length: approx. 3,800 mm (depending on the design, tube lengths of up to 6,000 mm can be processed by feeding the tube from both sides) • Maximum bending angle: 185° • Hydraulic system: 15 HP, 380 volts, 50 Hz (connected to 380V) • Operating pressure: 100 bar • Wiring diagrams: Hydraulic wiring diagram (Type: 8.7903613/R) & Electrical wiring diagram (Type: 88902810/R) available. • Documentation: Original operating manual and original acceptance test report are available. Condition & Transparency: The machine is approximately 38 years old. Over the years, individual components have been repaired and replaced by specialist companies (partially deviating from original parts). Due to its age, the machine is explicitly sold without a guarantee for the remaining service life: the buyer bears the risk of future component failures. The machine is currently still connected to the power supply and can be inspected and demonstrated in operation at our facility by prior arrangement. An on-site inspection is strongly recommended before purchase. _____ Sales and Delivery Conditions: • Pricing: Ex works (prices net, plus statutory VAT). • Logistics: Dismantling, loading and transport must be completely organized and carried out by the buyer (or by a commissioned freight forwarder). • B2B sales only: "Sale only to companies, businesses, or dealers with proof of commercial status (no sale to private individuals)." • Availability: Subject to prior sale. For further questions, the detailed tool list, or to arrange an appointment, simply send us a message or call us directly!

Condition: like new (used), Year of construction: 2020, - 2 pneumatic clamps Gkodpsr Iiimjfx Akhsd - Mist lubrication system - depth adjustment - 400V

Condition: good (used), functionality: fully functional, motorized notching machine, 4 stations, drive power 2.2 kW Gkjdsz Smvgopfx Akhsd

Year of construction: 2008, condition: good (used), Manufacturer: WORTELBOER HOLLAND Type: PBM 24 Year of construction: 2008 Clamping area 215 - 620 mm Rotation area 170 - 620 mm Stroke 290 mm Max. wall thicknesses 1 cycle 40 mm Rotation speed 25, 38, 50 min TRB Roller conveyor 7000 mm with V Type Construction in height adjustable Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (estimate) length 3200 mm width Gkodpfx Aerr Ungskhsd 2200 mm height 1700 mm weight 12000 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: ready for operation (used), Year of construction: 1996, A custom-built Schuster groove machining machine is available. Components: separation magazine, centering unit, end machining insertion end, round groove milling unit, 90° turning unit, trapezoidal groove milling unit, groove deburring unit, sawing unit, end machining shaft, insertion end deburring unit, inspection and carrying unit and embossing unit. Overall system dimensions X/Y/Z: approx. 8000mm/2400mm/2500mm, weight: approx. 13000kg. The electronics were overhauled in 2015. Including coolant tank and chip conveyor. Documentation available. An on-site inspection is possible. Gksdoy Hvp Uepfx Akhjd

Condition: good (used), Year of construction: 2009, machine/vehicle number: 9155, Offer 24245 Technical data: - Pneumatic feed of the milling unit - Work table height adjustable via handwheel - Horizontal and vertical material clamping - cutter diameter up to 300 mm - max. profile height 190 mm - max. milling depth 110 mm - max. milling length 400 mm - Angle-adjustable stop Li + Re 20 90 20 ° - milling spindle speed 2800 rpm - Drive 400 V / 2.2 kw - Compressed air connection 6 - 8 bar - Air consumption per work cycle approx. 10 l - ELGO digital display for material cross stop - Pneumatic profile clamping - Spraying device Gedpfx Ajtq Takekhjkd - Space requirement approx. W 1100 x H 1500 x D 700 mm - Weight approx. 300 kg

Condition: new, Year of construction: 2025, functionality: fully functional, Simply Center Punch – The Center Marking Aid! A revolution in precision: We present the “Simply Center Punch” The world's only center marking device – an exclusive innovation from Northern Germany. The Problem No more inaccurate center marking of round parts - Are you familiar with the challenges of precisely center punching shafts or rods ranging from 15 mm up to 400 mm? Gkodpfxoxb Ucao Akhod - Inaccurate positioning. - Poor lighting conditions - No glasses for older users - Time-consuming manual alignment - Inefficient and error-prone processes - The market does not offer a universal and reliable solution for varying diameters. Our Solution: Simply Center Punch – A World First! Simply Center Punch: Precision made simple. - Globally unique: A center punch device / center marking aid developed and utility model protected by us, setting new industry standards. - 100% in-house development: From the first concept to the finished product – all from a single source. - Manufactured in-house: We guarantee quality "Made in Germany." - Versatile use: For diameters from 15 mm to 400 mm. - Center marking at the push of a button: Simply position, turn the handle, and mark the center. Your Advantages at a Glance Your benefits. - Maximum precision: Centers drill holes and markings with accuracy up to 0.3 mm. - Saves time and money: Speeds up your workflow and reduces rework. - Effortless handling: Intuitive operation requiring no prior experience. – Weight just 780 g. - Universally applicable: One tool for nearly all diameters in mechanical engineering, metalworking, etc. - Robust and durable: Made from high-quality materials for professional, continuous use.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, PROFILATRICE COMAL PRD 12 Automatic edging machine for strip end processing. Used to prepare strip edges for subsequent roll forming. Gksdpfx Akjxdr Swehjd The machine is equipped with a set of rollers capable of performing cold roll forming of strips and sheets, which are continuously shaped until the desired profile or tube is achieved. The machine has seen very little use, is fully operational, and is in good overall condition. Manual and original documentation are available.

Condition: used, Offered for sale is a hydraulic three-roll plate bending machine. Pre-bending capacity X/Y: 3000mm/15mm. Bending width: 3000mm. Reference material: Steel. Tensile strength of the reference material: 45-47kp/mm². Yield strength of the reference material: 25-27kp/mm². Equipped with hydraulically adjustable bottom rolls, hydraulic drop-end, plate support with vertical guide mast and support arm, and machine-mounted push-button control panel. Inspection possible by arrangement. Gedj Ad Nrlspfx Akhokd

Condition: good (used), Year of construction: 2006, 1 CNC tube end forming machine Manufacturer: BLM Type: Tube Form M32x1.5 Year of manufacture: 2006 Technical specifications Godpfx Akon Sm Ddjhekd Thrust force: 3.5 tons Locking force: 5 tons Working stroke: 130 mm Tool diameter: 80 mm Dimensions: 2400 x 1400 x 2000 mm Connected load: 12 kVA Weight: 2200 kg