Used Disposable Blades for sale (5,561)

Condition: used, Comprehensively tested, used Lodige Model KM 600D-3ZMZ 321 stainless steel continuous jacketed ploughshare mixer. Manufacturer: Lodige Material: Stainless steel Capacity: 300 litre working capacity. 600 litre total capacity (product dependent) Mixing trough: 630 mm diameter X 2000 mm long Discharge Type: electrically driven Weir plate discharge direct driven by motor and gearbox Type Of Blades: Stainless steel ploughshare blades Motor: 15 kW 380 volt 3/50 1500 rpm motor and sew type R100P gearbox. Also includes: carbon steel jacket 85 litre capacity rated 5 bar design pressure at 158°C - (3) stainless steel multiple blade choppers direct driven by 5.5 kW 380 volt 3/50 3000 rpm motors - (2) side inspection doors. - mounted on mild steel support frame with (4) wheels. - Throughput performance approximately 18 cubic meter/hour with 1 minute residence time. A video of this mixer is available below. Iajdsx Niw Ropfx Addel Specifications: Bowl Volume: 158.5 gal Motor Power: 15 hp Material Of Construction: Stainless Steel Choppers (Y/N): Yes Number Of Choppers (1-10): 3 Horsepower Of Choppers: 5.5 RPM Of Choppers: 3000 HP Of Unit: 15 Revolutions Per Minute: 1500 Jacket (Y/N): Yes Jacket Pressure: 5 Jacket Temperature: 158

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1998, TECHNICAL SPECIFICATIONS Max. sheet thickness St45 16 mm Cutting length 3100 mm Range back gauge 1000 mm Min. cutting angle 0.5 ° Max. cutting angle 3.5 ° Number of sheetholders 17 Min. number of strokes/min. 6 Max. number of strokes/min 30 Min. blade clearance 0.1 mm electric powerd back guage with elgo "go-to" controller plate following system at back guage Iaodeyag Uaopfx Addsl

Condition: excellent (used), Year of construction: 2016, Ref: 11047 . 2016 EBA 721-06 LT Guillotine 72cm Automatic guillotine. Equipped with: Electro-mechanical blade drive Hydraulic clamp drive Infinitely adjustable clamping pressure (250-2000 kgs) with optical indicators Snap-in false clamp plate with optical indicator Spindle guided electro-mechanical back gauge drive for precise positioning Air table on front and rear table Foot pedal for pre-clamping or cutting line indicator Optical cutting line indicator with LEDS Durable stainless steel working surface on front table HSS steel knives Swing cut for more cutting precision Adjustable solid steel blade carrier guided on both sides Adjustable blade depth Stainless steel side tables (left and right) Electronically guarded front table area by photocell safety guard Transparent safety cover on rear table Two-hand safety activation with repetition blocking and control for synchronous operation Iaedpjx Nfr Rofx Addol Automatic return of blade and clamp from every position Main switch, safety lock and key Blade changing device with covered cutting edge Knocking-up device Features: 99 programs with up to 99 steps each Up to 9 repeat measurements can be integrated in one program step Program runs automatically – with electronic cutting monitor 10-button-keyboard for pre-setting of measurement 3 memory buttons available for individual measurement setting Electronic digital display with an accuracy of 1/10 mm ‘Set Function’ key for reference measurement Electronic hand wheel with infinitely variable speed for Fine adjustment of back gauge Push buttons for fast back gauge movement (forward and reverse) Automatic measuring correction in case of back gauge displacement Memory key for repeat cuts (manual) and additional automatic memory Paper eject function with and without program mode (advancing programmable) Delete and insert mode for correcting and modifying programs Integrated calculator Self-diagnostic system with error indication on display Metric and imperial changeover Specification: Cutting width: 720mm Cutting height: 80mm – 781mm Insertion depth: 720mm Front table depth: 530mm Minimum cut: 20mm – 901mm Back gauge speed: 53 mm/s Dimensions W x D x H in mm 1305/21002 x 1500/16002 x 1335

Condition: good (used), Year of construction: 1989, overall weight: 1,050 kg, tooth pitch: 120 mm, total width: 1,850 mm, total length: 1,550 mm, total height: 1,800 mm, saw blade diameter: 800 mm, grinding wheel diameter: 175 mm, input voltage: 380 V, type of input current: three-phase, saw blade bore: 10 mm, saw blade width: 16 mm, input frequency: 50 Hz, We offer this good Vollmer Finimat beta sharpening machine, year of construction 1989. Use of one grinding head in combination with two diamond wheels for face and top. Triple chip tooth configuration can be ground in one revolution of sawblade. Saw blade diameter: 100-800 mm Bore size minimum: 10 mm Tooth pitch: 8-120 mm Blade thickness maximum: 16 mm Rake angle range: -20 to +30 degrees Top clearance angle range: +5 to +25 degrees Bevel angle (face) range: 0 to +15 degrees Bevel angle (top) range: 0 to +45 degrees Tooth height differential range: 0 to 1 mm Grinding wheel outer diameter options: 175 or 125 mm Grinding wheel bore diameter: 50.8 mm Maximum circumferential speed: 34 m/s Minimum circumferential speed: 25 m/s Voltage: 380 V Phase: 3 Frequency: 50 Hz Ijdpfx Adsx Saw Todjal Total connected load: 4.6 kW Machine width: 1850 mm Machine depth: 1550 mm Machine height: 1800 mm Net weight: 1050 kg Available April 2026 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: like new (used), Year of construction: 2025, Flexible horizontal band resaw with tiltable conveyor Modern resaw with impressive features : Cast iron dynamicly balanced wheels Iajdpfx Adex Upquodol Hydraulic blade tension Inverter controlled feed system Automatic pressurised lubrication system with reservoir tank External control panel 22.0 KW motor - latest IE-3 energy efficient motor Tilting conveyor up to 45 degrees * very suitable for shiplap cladding, wall cladding * Maximum material size (W X H): 300mm x 300mm Feed speed (variable): 0~18 m/min same as new very suitable for shiplap cladding, wall cladding and many more

Condition: used, Year of construction: 1981, total height: 2,860 mm, total length: 6,300 mm, total width: 1,230 mm, Weight: 1.000 kg - Year: 1981 Iajdpfjwlz Tiex Addel - Documentation available: Yes - CE certificate present: No - Serial number: 9905 - Max. cutting height vertical [mm]: 2200 - Max. cutting height horizontal [mm]: 5300 - Max. cutting width [mm]: 2100 - Max. cutting depth [mm]: 80 - Min. saw blade diameter [mm]: 300 - Max. saw blade diameter [mm]: 300 - Arbor saw blade diameter [mm]: 3 - Horizontal cutting: Yes - Vertical cutting: Yes - Automatic: Yes - Voltage [V]: 380 - Power [kW]: 7.8 - Transport dimensions: 6300mm x 1235mm x 2860mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Comprehensively tested and refurbished used Winkworth model RT400 316 stainless steel high speed ploughshare (T-Arm) mixer. Material: Stainless steel (316) Capacity: 400 litre (Product Dependent) Mixing Chamber: 1,300mm Long x 800mm Diameter Discharge Type: Centre Bottom Pneumatically Operated Flap Discharge Valve Type Of Blades: T-Arm Blades Motor: 22kW SEW Geared Motor Also includes: (1) Stainless Steel Side Entry Refiner Driven by a 7.5kW Motor. Provision for a Second Chopper. A video of this mixer is available below. Ijdpjx Niwwofx Addsal Specifications: Bowl Volume: 105.7 gal Motor Power: 22 kW Material Of Construction: Stainless Steel Choppers (Y/N): Y Number Of Choppers (1-10): 1 Horsepower Of Choppers: 10.057 Vacuum Internal (Y/N): N Jacket (Y/N): N Dimensions: 1300mm Long x 800mm Diameter

Year of construction: 1991, condition: good (used), Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, table saw, circular saw, panel saw -Manufacturer: Altendorf, sliding table saw type TKR 45 -Main motor: Bauknecht 5.5 kW with brake Ijdpfx Asmydmbjddeal -Scorer motor: Emod 0.75 kW -Speed: 3000/4000/5000 rpm -Saw blade: Ø 300 mm / max. Ø 350 mm -Max. Cutting height: 90° 95 mm / 45° 70 mm -Miter cut: up to 45° -Cutting width: 2250 mm -Table length: 1400 mm -Dimension total 3480/1530/H1370mm -Weight: 1104 kg

Condition: excellent (used), Year of construction: 2017, Ref:11049 . 2017 Ideal 5221-95 EP Guillotine. 52cm programable guillotine Equipped with: Electro-mechanical blade and clamp drive Power ‘EP’ back gauge Control module Electronic hand wheel for manual back gauge positioning Infinitely variable speed control (from very slow to very fast) Optical cutting line Adjustable back gauge with narrow separations and plastic gliders Two side lays each on front and rear tables High-quality blade made from “Solingen steel” Solid steel blade carrier and adjustable blade guides Iajdpsx Nfr Dsfx Addol Automatic clamping system, guided on both sides for evenly distributed clamping pressure Clamp can be lowered or raised independently from blade Machine and stand can be separated for transportation through narrow doors (70 cm) Side tables (left and right) SCS (Safety Cutting System): hinged, electronically controlled safety guard on the front table Transparent safety cover on the rear table Main switch and safety lock with key Electronically controlled true two-hand operation 24V controls (low voltage) Disk brake for instant blade stop Blade changing device with covered cutting edge Blade depth adjustment from the outside of the machine Easy blade change from the front of the machine without removing covers. Digital display for measurement readout in cm or inches (display accurate to 1/10 mm or 1/100 inch) 10-button keypad for presetting of measurement Memory key for repeat cuts | 9 programs with 9 steps in each program (up to 9 repeat cuts can be integrated into a program as one single program step) Setting of program steps via “Start” button ‘SET’ function key for reference measurement Programmable eject function – for pushing out the paper Two programmable keys for quick setting of frequently needed measurements Self-diagnosis system with error indication on display Specification: Cutting length: 520 mm Cutting height: 80 mm Narrow cut: 35 mm Table depth: 520 mm Power supply: 230 V / 50 Hz

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: CHD 251R2, grinding wheel diameter: 200 mm, input current: 380 A, We offer this excellent condition Vollmer CHD 251R2 ND300 saw-blade sharpening machine. The CHD 251 R2 automatic grinding machine with ND 230 Robot system as a service for fully automatic machining with 5 bay loading. Year of construction 2002. Manufacturer: Vollmer Werke Maschinenfabrik GmbH Model: CHD 251R2 ND300 Year of manufacture: 2002 Serial number: 575 Iaedpfsx R Eydjx Addjl Available Now If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, Satrind 8/25 Twin Shaft Shredder, 18KW Motor (brand new) 30 x 50 mm 1 pick blades. Cutting Chamber 758mm x 700mm machine built onto stand with hydraulic ram that can be operated independently of control panel by a remote control. The machine has been completely refurbished with new blades, resharpened new bearings, seals & safety switches fitted & can be seen working. Ideal for plastic drums, crates, bins. Iaodpfx Aswxfggeddjl For price contact seller for more information & a video of the machine operating if required.

Condition: used, Year of construction: 2022, operating hours: 400 h, total length: 80,000 mm, total height: 20,000 mm, total width: 24,000 mm, Weight: 5.000 kg Price: On request Homag Sawteq B-130 Year: 2022 Serialnumber: Specification: 3200mm cutting width and length 65mm blade projection Program fence speed forward 25m/min Program fence speed backwards 60m/min Clamps 50, 250, 450, 1200, 2000, 2700mm 4 Manual trim stops Saw carriage speed 60m/min Main saw motor 7.5kw Scoring saw unit Intelliguide optical LED assistance 1 air table 2100 x 650mm with roller element 2 air tables 1800 x 650mm with roller elements 21.5 inch touch screen display CAD Plan 4 optimising software  - Year: 2022 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: - Operating hours: 400 - Main motor power [kW]: 7.5 - Control: CADmatic 5 - Software: CADPlan 4  - Saw blade bore diameter [mm]: 60 - Max. saw blade diameter [mm]: 310 - Max. cutting length [mm]: 3200 - Max. cutting width [mm]: 3200 - Options: Voorritser, Optimalisatieprogramma - Feed speed: - └ Max. feed speed [m/min]: 60 - Scoring unit: - └ Scorer bore diameter [mm]: 45 - └ Scorer blade diameter [mm]: 150 - Transport dimensions: 80000mm x 24000mm x 20000mm (l x w x h) - Transport weight [kg]: 5000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Iedpewu E Euefx Addjal Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2004, operating hours: 19,000 h, Serial number: 873xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20699 Specifications: 2004 model Approx. 19,000 hours Weight: 17,750 kg Machine width: 253 cm Outriggers Dozer blade Tires (see photos) Two-piece boom Auxiliary hydraulics Minor hose sweating Trailer hitch Cab door lock not working Broken front window Climate control Lights Ready for delivery Description: 2004 Volvo EW160B wheeled excavator with outriggers, blade and two-piece boom.Faults and wear are present; some refurbishment should be expected.Ready for delivery. Hours: 19000 Own weight: 17750 Total Weight: 17750 Width: 253 Iajdpfx Ajwqwrrjddol Model: EW160B hjulmaskin m/ støtte bein og skjær

Condition: used, Year of construction: 1999, cutting width 150 mm machine weight ab. 300 kg Iodpfx Aova Nqgoddeal 27468

Condition: used, Cart 320cm Tiltable blade Iodsyac Agopfx Addeal Cutter 400V

Condition: used, Year of construction: 2018, total height: 1,650 mm, total length: 1,400 mm, total width: 900 mm, Empty weight: 730 kg Iedpfxjwxdmfo Addjal - Year: 2018 - Documentation available: No - CE certificate present: No - Serial number: 89E0618 - Drive system: Conventional - Saw type: Semi-automatic - Horizontal/vertical: Horizontal - Mitre cutting available: Yes - Round cutting capacity [mm]: 255 - Round cutting capacity at 45° [mm]: 200 - Power [kW]: 1.1 - Saw blade length [mm]: 2750 - Saw blade width [mm]: 27 - Saw blade thickness [mm]: 0.9 - Saw speed [m/min]: 73 - Control: Conventional - Motor power: 1.1kW - Transport dimensions: 1400mm x 900mm x 1650mm (l x w x h) - Transport weight [kg]: 730kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 1998, condition: used, Field of application: Freight transport Please contact ATS Norway for more information Please provide reference number upon request: 19290 Specifications: - 1998 model - Hydraulic lateral displacement - Width of grader blade: 337 cm - Grader blade - Ready for delivery Description: The sliding door works as it should according to the owner. It fits tractors and trucks. Ready for delivery. Isdpfx Aovgyq Deddoal Width: 337

Condition: used, Year of construction: 1981, turning speeds 40/80 U/min 0025 voltage 380 V clamping ja kW Ijdpfsvu Hlkjx Addoal miter ja weight 700 kg

Condition: used, Year of construction: 2020, Blade width from 15 to 250mm No teeth max 60mm Tooth form: PV,NV,KV,SB Isdpsyacyrsfx Addeal ANGLES FROM -10° TO +30° Blade thickness from 06 to 3.2mm 8 speeds of advancement Grinding wheel diameter 250mm 20mm blade bore Blade thickness 10mm Grinding wheel speed from 1400 to 5000 rpm Power 1.5kW 380V Under watering Weight +/- 600kg Warning, blade carousel missing !!!

Condition: used, Year of construction: 1977, miter ja clamping ja kW mechanical Senkung weight of the machine ca. 500 kg Ijdpfovxlthox Addsal

Condition: used, Year of construction: 2008, Scroll speed 10m/min Blade width from 50 to 300 mm Blade thickness from 0.8 to 2.00 mm Blade length from 5,800 to 14,000 mm Digital control panel Weight +/- 600kg Machine documents Iodsyacyfjpfx Addsal User manual Electrical Schematics

Condition: used, Year of construction: 1996, weight of the machine ca. ca. 1500 kg 1707 connected load frequency 400 V 230 V frequency 50 Hz generator - rated current 8 A output 4 kw saw-blade dia. 400 mm ja Isdpjupmv Usfx Addsal

Condition: used, Year of construction: 1989, cutting diameter 260 mm serial number 109967 Iedopxri Uopfx Addjal volt 380 V frequency 50 Hz weight of the machine ca. 500 t

Condition: used, Year of construction: 1979, cutting diameter 440 mm Iedpfef Dwa Uox Addeal weight of the machine ca. 780 kg +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1980, saw blade diameter 380 mm pneumatic clamping ja 46893 weight of the machine ca. 1,3 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Isdpfx Adod N Sm Dodoal Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++