Used Dmg Dmc 835 V for sale (384)

Condition: used, Year of construction: 2009, x-travel 835 mm y-travel 510 mm z-travel 510 mm CNC-control iTNC530 HEIDENHAIN table-size 1000 x 560 mm max. table load 800 kg spindle taper SK 40 spindle turning speed range 20 - 14.000 U/min feed stepless 1 - 20.000 mm/min rapid traverse 20 m/min drive capacity - spindle motor 13 / 9 kW tool change unit 32 Pos coolant IKZ 25 bar voltage 400 V total power requirement 30 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 2,25 x 3,20 x 2,30 m chip conveyor 3,50 x 0,85 x 1,55 m coolant equipment 1,40 x 1,60 x 1,80 m spindle oil cooler 0,40 x 0,50 x 1,00 m - Serial-No.: 15415041384 - Machine ON: 72,882 h - Program Run: 25.267 h - control: HEIDENHAIN iTNC 530 - Linear scales in all 3 axis - electr. handwheel - Tool changer 30 pos. with double gripper - Chip conveyor Lhodey Ty A Sepfx Ac Aeh - TSC with belt filter system - Coolant unit - new ball screw incl. bearings (X-Axis)

Condition: ready for operation (used), A defective vertical CNC machining center DMG Mori is available. Travel X/Y/Z: 835mm/510mm/510mm, tool stations: 20, tool holder: SK40, speed: 10000rpm, table dimensions X/Y: 1000mm/560mm, T-slot spacing: 100mm, max. table load: 800kg, table height: 720mm. Control: Heidenhain TNC 530, operating hours: approx. 29836h. Either the pneumatic release cylinder or the spindle is defective. Documentation available. On-site inspection is possible. Lhsdpfx Aex Ivkzec Ash

Condition: excellent (used), Year of construction: 2005, x-travel 835 mm y-travel 510 mm z-travel 510 mm CNC-control SIEMENS table-size 1000 x 560 mm max. table load 800 kg spindle taper SK 40 spindle turning speed range 20 - 8.000 U/min feed stepless 1 - 20.000 mm/min rapid traverse 20 m/min drive capacity - spindle motor 13 / 9 kW tool change unit 20 Pos Lodpoyxxyyefx Ac Ashh voltage 380 V total power requirement 35 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 3,50 x 3,50 x 2,70 m - Serial-No.: 15415015634 - Main spindle NEW bearings - Machine ON: 18,484 h Program ON: 9,153 h - SIEMENS control system - With NC sub-unit (4th axis, controlled via M-code) - Chip tray (no chip conveyor) - Coolant system

Condition: ready for operation (used), Year of construction: 2006, operating hours: 17,450 h, travel distance X-axis: 835 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: 840D with ShopMill, table width: 560 mm, table length: 1,000 mm, table load: 800 kg, overall weight: 4,200 kg, number of axes: 4, This 4-axis DMG DECKEL MAHO DMC 835V was manufactured in 2006. Ideal for precision vertical machining, this used machine maintains robust functionality despite its years. Consider the opportunity to buy this DMG DECKEL MAHO DMC 835V vertical machining centre. Contact us for more information. Additional equipment • Linear Encoder Measuring System • A-axis • Electronic Handwheel • Internal Coolant – 25 bar / 30 l/min • Cabin Roof • New Spindle Bearings Lhsdpfoyrd Hwex Ac Aeh Machine Benefits Technical Machine Benefits • Tool mountings: sk 40 Extra Information Machine still under power Dimensions Machine Depth 2100 mm

Condition: excellent (used), Year of construction: 2013, Control: Heidenhain iTNC 530 Traverse path X: 635 mm Travel Y: 510 mm Z travel: 460 mm Spindle speed: 10,000 rpm Spindle power: 13/9 KW Tool holder: SK 40 Pallet size: 800 x 500 mm Pallet load: 400 kg Tool changer: 30 places Rapid traverse: 30 m/min 3D measuring probe TS 649 Table probe Rinsing gun handwheel Lhjdetk Nzbspfx Ac Aeh Linear scales

Condition: excellent (used), Year of construction: 2011, Heidenhain TNC 620 control system Travel X/Y/Z: 1035/560/510 mm Spindle speed: 12,000 rpm Tool magazine for 30 tools, SK 40 Through-spindle cooling: 12 bar Chip conveyor Ljdszfx T Dopfx Ac Ashh

Condition: excellent (used), Year of construction: 2003, Available directly from the tool shop Vertical machining center Make: DMG Model. DMC 104 V Linear Year of manufacture 2003 CNC Siemens 810 D Powerline Spindle hours 18,200 (July 2024) Table area 1,250 x 600 mm X-axis travel 1,000 mm Y-axis travel 600 mm Z-axis travel 500 mm Tool holder SK 40 Spindle speeds 1 - 12,000 rpm Drive 13/19 kW at 100/40% duty cycle 30-station tool changer Equipment: Linear drive on the X-axis Bed flushing system Spiral chip conveyor Direct position measuring system Drill breakage detection via laser Temperature compensation of the Z-axis via temperature sensor including active cooling unit Internal coolant supply through the spindle External air blown through 2 Pipes 700-liter coolant system, paper belt filter system with 40 bar high-pressure system Visiport viewing window on the operator door Lsdpst I Di Ajfx Ac Aohh Additional machine door on the left side Bader cooling unit on the control cabinet Prepared for connecting a 4th axis with a Siemens 1FT 6064.1AF71-4AG1 drive motor and an indirect measuring system with 0.5 bar sealing air

Condition: ready for operation (used), Year of construction: 2007, operating hours: 36,012 h, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 510 mm, controller model: 3D Heidenhain i TNC 530, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 635 mm Travel range, Y-axis: 460 mm Travel range, Z-axis: 510 mm Spindle speed range: 20 - 10,000 rpm Table dimensions: 790 x 560 mm Table load capacity: 600 kg Tool holder: SK 40 Number of tool magazine slots: 20 MACHINE DETAILS Control system: 3D Heidenhain i TNC 530 Total power consumption: 13.9 kW Lhjdpszb Dzmjfx Ac Ash Operating hours (according to counter) Spindle hours: 36,050 h Power-on hours: 91,000 h Dimensions & Weight Dimensions (L x W x H): 3,000 x 2,000 x 2,150 mm Machine weight: 3.6 t

Condition: used, Vertical Machining Center Machine type: DMG DMC 635 V Control: Sinumerik 840 D Year of manufacture: 2008 TECHNICAL DATA: Travel: X-axis: 635 mm Y-axis: 510 mm Z-axis: 460 mm Rapid traverse (X/Y/Z): 30 m/min Spindle speed range: 20 – 10,000 rpm Spindle motor: 9 / 13 kW Tool holder: SK 40 Tool changer Tool pockets: 20 Table size: 790 x 560 mm Ledpfx Asyu S T Djc Aohh Machine weight: 4,000 kg Features: No chip conveyor – chip tray Electronic handwheel Glass scales

Condition: good (used), Year of construction: 1996, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, table load: 1,200 kg, rotational speed (max.): 15,000 rpm, overall weight: 9,100 kg, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Ready-to-demonstrate, well-maintained milling machine DMC 100 V with few spindle operating hours. Ledozgamhjpfx Ac Aehh A few hydraulic hoses should be replaced soon.

Condition: excellent (used), Year of construction: 2015, X-axis 850 mm Y-axis 520 mm Lsdpfx Ajwvr Tnec Aehh Z-axis 475 mm Spindle speed 10,000 rpm Spindle mount HSK 100 Tool changer 40 positions Control SIEMENS 840 Dsl Power 33 kVA Including internal coolant (IKZ) Including various tool holders Including measuring probe TS 649 Including Rotoclear Spindle hours: 10,730 h

Condition: excellent (used), Year of construction: 2005, operating hours: 35,000 h, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 90 m/min, rapid traverse Z-axis: 90 m/min, feed rate X-axis: 90 m/min, feed rate Y-axis: 90 m/min, feed rate Z-axis: 90 m/min, controller manufacturer: Heidenhain 530i, workpiece length (max.): 1,000 mm, workpiece width (max.): 800 mm, workpiece height (max.): 300 mm, workpiece diameter (max.): 1,050 mm, workpiece weight (max.): 900 kg, table load: 900 kg, overall weight: 14,000 kg, spindle speed (min.): 18,000 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Very well-maintained 5-axis portal machining center, primarily used for 95% aluminum machining. The machine can be sold immediately. Ljdjzbbpzjpfx Ac Ajhh • Rapid traverse and feed rate: 90 m/min • Acceleration: 9 m/s² • HSK 63A / 18000 rpm • External nozzles / internal coolant system / air / 1000L coolant tank • Chip conveyor, can be inserted from either side • 5 axes simultaneous • 60 tool positions in the tool changer • Blum laser / dial indicator • Brandkamp collision protection system • Indunorm pallet changer, 300 kg capacity • Plans and operating manuals for the machine and all other components • Includes 3 pallets, size 600 x 800 (since 2016) • Spindle overhauled in 2023, see attached document • Pallet transfer with Partool system (since 2016) + pallets • All axes with linear drives • Machine serviced annually, wear parts replaced

Condition: excellent (used), Year of construction: 2008, DMG DMC 635 V TNC530 Heidenhain Vertical CNC Machining Center The machine has undergone a thorough inspection, and the spindle has been overhauled, with bearing replacement and spindle taper grinding performed. It is in very good technical condition. Technical specifications: Travel range (X/Y/Z = 635/510/460) Working area (travels): X-axis: 635 mm Y-axis: 510 mm Z-axis: 460 mm. Spindle: Rotational speed: 20 – 8,000 rpm. Spindle taper: SK40 Work table: Dimensions: 790 x 560 mm. Maximum load: 600 kg. Tool magazine: Capacity: 20 tools. Feeds: Rapid traverse (X/Y/Z): 25 m/min Control: Heidenhain iTNC 530. Dimensions and weight: Weight: approx. 3,900 kg. Dimensions: approx. 3.0 m x 2.3 m x 2.5 m. The machine has a cast iron construction and is designed for precise machining of parts, often used in series production. It is possible to equip the milling machine with a 4th-axis rotary table. Lhodpfozfarzjx Ac Ajh The machine can be inspected and tested at our company's premises.

Condition: used, DMG DMC 75 V linear is a 5-axis machining center engineered for precision, high accuracy and reliable operation. Working capacities: travels X 885 mm, Y 600 mm, Z 600 mm; table load max 600 kg; B axis +10/-110°; C axis 360°; table speed 100 t/min; tool magazine 60 places, tool Ø max 40 mm, length 300 mm; spindle interface HSK-A63. Key specs: spindle 0–28,000 rpm (stepless), spindle power 55/43.5 kW; rapid traverse 90 m/min; air 6 bar; power 3x400 V 50 Hz; machine weight ≈11,000 kg; dims L3255×W2450×H3150 mm. Accessories: high-pressure coolant 60 bar, chip conveyor, electronic handwheel. Achieves tight tolerances; typical in automotive, aerospace, medical, watchmaking and machine tool industries Lhjdoy S Dfnspfx Ac Ajh

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Travels X = 1,450 mm, Y = 700 mm, Z = 550 mm Rapid traverse 42 m/min Spindle speed range 20 to 14,000 rpm Inline spindle with power 20.3 kW / 14.5 kW (40/100% load) Lhodpfx Acsylpf Se Aeh Tool taper SK40 DIN69871 Tool shank according to DIN69872 Tool changer with 20-position SK40 magazine (disc with tool holder in bushing and double gripper) Table clamping area 1,760 x 750 mm Direct position measuring in X, Y, Z axes Machine is connected, can be tested.

Condition: used, Year of construction: 2012, x-travel 1.035 mm y-travel 560 mm z-travel 510 mm CNC-control HEIDENHAIN TNC620 table-size 1200 x 560 mm max. table load 1000 kg spindle taper SK 40 spindle turning speed range 10.000 U/min drive capacity - spindle motor 13 kW feed stepless 20.000 mm/min rapid traverse 25 m/min tool change unit 20 Pos. coolant IKZ 20 bar Lodpew A Spvofx Ac Ajhh voltage 400 V total power requirement 17 kVA weight of the machine ca. 4,1 t dimensions of the machine ca. 2,55 x 2,30 x 2,25 m chip conveyor 3,90 x 0,95 x 1,60 m - Serial No.: 1539000377A - Machine ON: 21.689 h - Program Run: 9.021 h - CNC-Control: Heidenhain TNC620 - elektronic hand wheel - chip conveyor - coolant through spindle 20 bar

Condition: good (used), Year of construction: 2010, operating hours: 33,600 h, functionality: fully functional, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: Siemens, controller model: Siemens 810D / ShopMill, table width: 560 mm, table length: 1,200 mm, spindle speed (max.): 10,000 rpm, operating hours of spindle: 11,000 h, Equipment: chip conveyor, Internal coolant supply (IKZ) Control cabinet cooling: Rittal SK 33023.100 Lhedpfx Aoyua Sbec Aeh Tool magazine: 20 positions

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, total height: 2,670 mm, total width: 3,288 mm, spindle speed (max.): 14,000 rpm, spindle motor power: 15,000 W, product length (max.): 2,275 mm, number of axes: 3, This 3s DMG DMC 635 V vertical machining centre was manufactured in 2008. It features a maximum spindle speed of 14,000 rpm and a powerful spindle with 18.5 kW. The machine has a working area with a table dimension of 560 × 790 mm and can handle workpieces weighing up to 600 kg. If you are looking to get high-quality machining capabilities, consider the DMG DMC 635 V machine we have for sale. Contact us for further details. • Distance table surface / spindle nose: 720 mm • Working area • Number of pallets: 1 • Table dimensions: 560 × 790 mm • Maximum workpiece weight: 600 kg • Spindle • Maximum torque: 100 / 74 Nm • Tool magazine • Tool holder: SK40 • Tool magazine positions: 20 • With adjacent tool positions free: 130 mm • With adjacent tool positions occupied: 80 mm • Maximum tool length: 300 mm • Tool change time: 1.6 s • Chip-to-chip tool change time: 6 s • Equipment / features • Electronic handwheel • Air flow through the spindle activated via M function • Working time Lhedpfoykaawjx Ac Ajh • Power on: 34,484 h • Spindle running: 25,110 h • Rated power: 35 kVA Technical Specification Taper Size SK 40

Condition: excellent (used), Year of construction: 2007, DMG DMC 1035 V Machining Center DMG DMC 1035 V with Heidenhain ITNC 530 Control, Year 2007, in Excellent Original Condition The machine comes from the toolmaking department of a renowned German mechanical engineering company. CE compliant!! Technical Data: Year of manufacture: 2007 Technical Details X-travel: 1,035 mm Y-travel: 560 mm Z-travel: 510 mm Control: iTNC 530 Heidenhain Main Spindle: Speed Range (Main Spindle): 20 – 8,000 min⁻¹ Drive Power (Main Spindle): 13 / 9 kW Tool Holder BT 40 Draw Bar: ISO 7388-3-A AD40 Work Table: Clamping Surface: 1,200 x 560 mm Max. Table Load: 1,000 kg Table Height above Floor: 720 mm T-slots: 5 x 14 x 100 Tool Changer: Number of Tool Stations: 20 Lhedpexqgrxjfx Ac Ash Max. Tool Diameter: 80 mm Max. Tool Diameter with free adjacent slot: 130 mm Max. Tool Length: 300 mm Max. Tool Weight: 6.0 kg Tool Change Time: 1.6 sec Chip-to-chip Time: 7.0 sec Feeds: Feed Rate: 24,000 mm/min Rapid Traverse: 30 m/min Connected Load: 20 kVA Machine Weight approx.: 4.5 t Required Installation Space approx.: 4.0 x 4.0 x 2.5 m About the machine: Offered here is a DMG DMC 1035 V machining center with a Heidenhain ITNC 530 control. This machining center is in excellent original condition. It comes from a facility where it was used primarily for training purposes, meaning minimal hours of operation. The control is very easy to operate. The guideways are regularly lubricated by centralized lubrication. The DMG DMC 1035 V has been mechanically and electrically inspected by us. Take the opportunity to visit and inspect the DMG DMC 1035 V under power at our premises. You will find further milling machines from leading manufacturers on our website.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 10,700 h, DMG vertical machining center Model DMC 65 V Year : 2002 X - Y - Z travel : 650 - 500 - 500 mm. RPM : 18000 Tool change : 30 pcs. Spindle taper : ISO 40 Lsdpexqch Ajfx Ac Ajhh Control : MILL PLUS Syncronspindle Hand wheel for axes travel Interface RS-232 C Coolant

Condition: ready for operation (used), Year of construction: 2009, Travel path X/Y/Z: 1035mm/560mm/510mm, table dimensions X/Y: 1200mm/560mm, max. table load: 1000kg, tool holder: SK40, tool stations: 20, spindle speed: 8000rpm, power: 13kW/9kW, torque: 83Nm/57Nm, feed rate: 20m/min, rapid traverse: 25m/min. Machine dimensions X/Y/Z: approx. 4000mm/4000mm/2600mm, weight: approx. 4500kg, control: Siemens Sinumerik 810D powerline, operating hours: 27241h. Including conveyor. Documentation available. An on-site inspection is possible. Lsdexrui Iepfx Ac Aohh

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 10,000 rpm, spindle nose: ISO 40, number of slots in tool magazine: 30, Equipment: CE marking, chip conveyor, documentation/manual, VERTICAL MACHINING CENTER DMG MODEL DMC 635V TRAVELS: 635x510x460 mm TOOL CHANGER RANOM 30 POSITIONS SPINDLE 10,000 RPM HIGH PRESSURE THROUGH SPINDLE CHIP CONVEYOR REMOTE HANDWHEEL HEIDENHAIN HR410 Lhedexq E Daepfx Ac Ajh

Condition: ready for operation (used), Year of construction: 2003, operating hours: 42,368 h, General Data Machine weight 6800 kg Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 12000 Tool taper SK40 Number of axis 3 Movement X-Axis Movement 640 mm Y-Axis Movement 600 mm Z-Axis Movement 500 mm Lodpfx Asx D Ntfec Ajhh This 3-axis DMG DECKEL MAHO DMC 64 V linear was manufactured in 2003. It features a 640 mm X-axis, 600 mm Y-axis, 500 mm Z-axis, and a table size of 850 x 600 mm. Equipped with a Heidenhain iTNC 530 control unit, SK40 taper, and a tool magazine with 30 tools capacity. Consider the opportunity to buy this DMG DECKEL MAHO DMC 64 V linear vertical machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2005, operating hours: 18,000 h, functionality: fully functional, travel distance X-axis: 800 mm, rapid traverse X-axis: 800 m/min, rapid traverse Y-axis: 500 m/min, rapid traverse Z-axis: 500 m/min, For sale: DMC835V Kitagawa rotary table, controllable via MAC Mini through M-code function. The mounted collet chuck is NOT included, but a 3-jaw chuck is supplied. No internal coolant supply (IKZ) No chip conveyor Electronic handwheel 20-position tool changer Includes 20 SK40 tool holders Ledpfoxur Akex Ac Aohh Loaded free on truck Sinumerik 840D SK40 taper 8000 rpm spindle No vices Approx. 9000 spindle hours

Condition: excellent (used), Year of construction: 2007, travel distance X-axis: 1,135 mm, travel distance Y-axis: 1,050 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 90,000 m/min, rapid traverse Y-axis: 90,000 m/min, rapid traverse Z-axis: 90,000 m/min, controller manufacturer: HeidenHain iTNC530, total height: 3,300 mm, total length: 3,700 mm, total width: 3,200 mm, rotary table diameter: 950 mm, overall weight: 12,500 kg, spindle speed (min.): 28,000 rpm, spindle motor power: 25,000 W, 5-axis CNC machine (VMC) DMG MORI - DMC V105 Linear MACH-ID 9641 Make: DMG MORI Type: DMC V105 Linear Control: HeidenHain iTNC530 X - Travel: 1135mm Lhedozbr D Aepfx Ac Ajh Y - Travel: 1050mm Z - Travel: 700mm A - Axis: -10 to +110° B - Axis: 360000° Table Ø: 950mm Feed rate X-Axis: 90000mm/min. Feed rate Y-Axis: 90000mm/min. Feed rate Z-Axis: 90000mm/min. Spindle Taper: HSK63ISO/Bt/Mk Power on spindle: 25kW Speeds / ranges: 28000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: yes Coolantsystem: yes Length: 3700mm Width: 3200mm Height: 3300mm Weight: 12500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!