Used Dmg Machining Center for sale (409)

Condition: good (used), Year of construction: 2016, Table size 800 x 620mm, Traverses X Y Z 750 x 600 x 520mm, B axis -10/+95 degrees, C axis 360 degrees, Spindle speed 12,000 rpm, 32 station ATC, Ijdpsxfr Syefx Ag Netn Siemens control, swarf conveyor.

Year of construction: 1999, condition: excellent (used), DMU80E with hard disk storage Control Heidenhain 426M Year 1999 2014 axes and spindle revised Speed 18000 Isdpfogwt U Djx Ag Njtn Since the revision approx. 1200 hours run Accuracy according to a new machine Chip conveyor available Accessories would be available at extra cost.

Condition: excellent (used), Year of construction: 2014, DMG Mori DMU 40 EVO (5 axis) Vertical Machining Centre Model: DMU 40 EVO Year: 2014 Control: Siemens ‘X’ axis Travel: 400mm ‘Y’ axis Travel: 400mm ‘Z’ axis Travel: 375mm Spindle Speed: 18,000 RPM Spindle Taper: HSK 63 Toolchanger Capacity: 120 station Through Spindle Coolant 40 Bar Itodpfx Agowwlr Ho Njn Coolant Filtration Chiller Probing

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details x-travel 1150 mm y-travel 710 mm z-travel 710 mm table surface area 1500 x 800 mm table load 800 kg tool taper SK 40 spindle turning speed - stepless 20 - 12000 U/min feeds -stepless- 0 - 30000 mm/min main drive motor 15 / 10 kW Additional information 5-Axis Universal Machining Center Equipment: CNC-control HEIDENHAIN iTNC 530 (5-axis simultaneous) Itedpfew I A Ekox Ag Nsn NC rotary table (4th-axis), diameter 800 mm, integrated into the fixed table Controlled milling head (B-axis), swivel range -120/+30 deg. ATC 32-positions (2 x 16) Chip conveyor Coolant system for external cooling, no internal cooling

Condition: excellent (used), Year of construction: 2018, Control: HEIDENHAIN iTNC530 Power-on hours: 11,204 h Spindle hours: 2,182 h Technical details: Travel (X/Y/Z): 600 / 560 / 510 mm Spindle: Max. speed: 12,000 rpm Drive power - main spindle: 13 / 9 kW Max. torque: 82 / 54 Nm Distance spindle nose to table: 120 - 630 mm Worktable: Table clamping surface: 900 x 560 mm Max. table load: 600 kg T-slots: 5 Working height: 850 mm Tool magazine: Number of tool positions: 30 Tool holder: SK 40 Max. tool diameter: 80 mm Max. tool diameter with adjacent pockets empty: 130 mm Max. tool length: 300 mm Max. tool weight: 8.0 kg Tool-to-tool change time: 2.4 sec Chip-to-chip time: 6.7 sec Feeds: Rapid traverse: 30 m/min Feed force: 5 kN Max. feed rate: 30,000 mm/min Total power requirement: 32 kVA Machine weight: approx. 5.0 t Space requirement: approx. 4.0 x 5.0 x 3.0 m The machine can be demonstrated under working conditions. Low operating hours! Itjdpfx Aowm I Ebsg Nsn Price includes loading.

Condition: used, BASIC DATA Condition: Very good Availability: 01/2025 Machine model: DMG NHX 4000 Year of manufacture: 2017 Operating hours: 41,220 h Spindle hours: 21,663 h Working area: X-axis travel: 560 mm Y-axis travel: 560 mm Z-axis travel: 660 mm TRANSPORT WEIGHT AND DIMENSIONS Transport weight Machine incl. tool magazine and chip conveyor: 9,300 kg Coolant unit KF 110/700: 1,500 kg Chiller unit: approx. 82 kg Sheet metal parts: 125 kg Documentation and accessories: 60 kg Transport dimensions of the machine incl. tool magazine: Length x Width x Height: 4.20 m x 3.20 m x 2.80 m SPINDLE INFORMATION Spindle specification Spindle type: SK004 motor spindle speedMASTER® HSK-A63 Spindle speed: 20–20,000 rpm Power: 35 kW (40% duty cycle), 25 kW (100% duty cycle) Torque: 130 Nm (40%), 86 Nm (100%) Workpiece weight per pallet: max. 400 kg Pallet size: 400 x 400 mm Max. workpiece diameter: 630 mm Max. workpiece height: 900 mm TOOL CLAMPING SYSTEM AND TOOL CHANGER Tool holder: HSK-A63 Standard: DIN 69893 Form A Clamping mechanism: Clamping: Mechanically by spring force Unclamping: Hydraulically Tool changer: Capacity: 40 tools (ring magazine system) Max. tool diameter: 70 mm (adjacent pockets free), 170 mm (adjacent pockets occupied) Max. tool length: 450 mm Max. tool weight: 12 kg Optional tool changer: Ring tool magazine with 60 pockets (HSK-A63) POWER SUPPLY Voltage: TN-S system, 400 V Power consumption (at 100% duty cycle): Ijdpfx Agexn Adls Notn Base machine: 45 kVA Coolant unit: 48 kVA Band filter unit: 55 kVA Mains connection rating for Siemens Sinamics S120 16 kW: 0.48 MVA 36 kW: 1.08 MVA 55 kW: 1.65 MVA 80 kW: 2.40 MVA 120 kW: 3.60 MVA COOLING SYSTEM AND CHIP DISPOSAL Coolant: Water-soluble coolant Interface for high-pressure coolant system: Up to 70 bar, compatible with Knoll systems Coolant flushing system: Includes cleaning guns Additional components: Rotating inspection window on the work area door Coolant flushing system for cleaning the machine interior Upgraded cooling system: Larger Bürner filter unit (DMG upgrade, see attachment) MEASUREMENT AND MONITORING SYSTEMS Tool breakage control system in tool magazine Spindle sensor measurement system with Renishaw OMP60 for automatic measurement and centering CONTROL SYSTEM CNC: CELOS® with Siemens 840D sl Operate Control panel: 21.5" ERGOline® Control with multi-touch display Functions: Apps for simplified machine operation as well as for comprehensive management, documentation, and visualization of order, process, and machine data. Networking with CAD/CAM and compatibility with PPS/ERP systems. WORKTABLE NC table: With direct drive technology Minimum indexing: 0.001° Max. rotational speed: 100 rpm DOCUMENTATION AND ADDITIONAL FEATURES Electrical schematics and user manuals in German Languages: Screen texts available in German and English CELOS products DMG MORI NETSERVICE for remote diagnosis SERVICE AGENT for maintenance monitoring MESSENGER for real-time machine status

Condition: good (used), Year of construction: 2016, Table size 1100 x 560mm, Traverses X Y Z 800 x 560 x 510mm, Spindle speed 12,000rpm, spindle taper BT40, 30 station ATC, FANUC control, Itodpfxoxddk Ej Ag Nen Table load 800Kg, Through spindle coolant, Swarf conveyor.

Condition: good (used), Year of construction: 2013, DMG, Type DMC 635 Ecoline, Year 2013 Travel: X 635 mm Isdpewa A Rlofx Ag Njtn Y 510 mm Z 460 mm Spindle speed 0-10,000 rpm Controlled axes: 3 Spindle mount: SK 40. L x W x H 3,500 x 4,000 x 2,700 mm Machine weight: 4,500 kg

Condition: good (used), Year of construction: 2006, operating hours: 9,128 h, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: Heidenhain 530 i, workpiece length (max.): 1,250 mm, workpiece weight (max.): 2,000 kg, total height: 3,000 mm, total length: 6,000 mm, total width: 3,000 mm, table load: 2,000 kg, rotary table diameter: 1,250 mm, overall weight: 14,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 40 bar, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-Axis Machining Centre Travel Range: X axis 1,250mm / Y axis 880mm / Z axis 800mm / B axis -30° to +180° / C axis 360° Rotary Table Diameter: 1,250mm The machine is available immediately and ready for operation. 5-axis geometry is within manufacturer tolerances and in good condition. The main spindle needs to be replaced due to a worn taper. If required, the main spindle will of course be replaced before delivery. Overall, the machine is well-maintained and has been serviced regularly. In 2020, the machine underwent extensive overhaul, including replacement of the X/Y sliding cover. All functions have been tested, and all fluids have been replaced. The machine can naturally be inspected and tested at our site. Transport and installation can be arranged at an additional cost by agreement. Chip conveyor / Coolant system / IKZ (internal coolant supply) NC universal milling head -30° to +180° Hand rinsing gun Heidenhain touch probe TS640 Oil/emulsion mist extraction unit Iodpfx Aoxpmttog Nstn Operating mode 4 (machining possible with door open at reduced feed rate)

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical details x-travel 1040 mm y-travel 600 mm z-travel 500 mm table surface area 1250 x 600 mm table load 600 kg tool taper SK 40 spindle turning speed range 1 - 8000 rpm max. torque on the spindle (S1/S6) 140/200 Nm feed range 40000 mm/min rapid power traverse in X-and Z direction 70 m/min rapid motion - y-axis 40 m/min spindle drive (100/40 % ED) 13/19 kW total power requirement 39 kVA weight of the machine ca. 8,9 t Operating hours 70278 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Equipment: CNC control Heidenhain iTNC 530 Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe Itodpfx Agsw Hybus Nen 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR Production package 2 Internal coolant supply through the spindle 20 bar Coolant system with paper belt filter Cooling device blown air through the spindle center selectable via M function Chip conveyor Bed flushing Linear drive in the X-axis Operating mode 4 Program check with extended manual intervention Machine documentation Transport dimensions: 4100 x 2500 x 3000 mm

Condition: used, Year of construction: 2004, x-travel 600 mm y-travel 700 mm z-travel 600 mm Control HEIDENHAIN TNC 530 Itodpfx Ajw Rrcqeg Nsn Tool taper SK- 40 Tools changer 120 fach number of spindle speeds 12.000 U/min/rpm Machine on 32.224 Spindle hours 10.850 h weight of the machine ca. 9,5 t dimensions of the machine ca. 5,45 X 3,53 X 2,63 m

Condition: used, Year of construction: 2016, x-travel 560 mm y-travel 560 mm z-travel 660 mm control Celos Siemens 840 sl Operator table surface area 400 x 400 mm rapid traverse 60 m/min table rotating 360 x 0,001 B-Achse ° table load 0,4 t numbers of pallets 2 turning speed range 15000 U/min max. torque on the spindle 207 Nm power capacity - milling spindle 30,7/26/18,5 kW no. of tools in the magazine 60 Stück tool taper SK 40 | weight 9,3 t dimensions 4,2 x 2,7 x 2,8 m Equipment: - full B-axis table - Thru-the-spindel coolant system 70 bar - chipcoveyor - Helical cutting - Synchronized tapping - absolute scale - one extra pallet - band filter system Knoll - oil dust collector - cable less 3D touch probe - tool break detection Isdpfxew Eygzj Ag Nstn - elct. hand wheel - spindle cooling - Roto Clean

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, controller manufacturer: Heidenhain, For sale: Used DMC 635 – Powerful Vertical Machining Center Upgrade your production processes with this robust and high-performance DMC 635 from DMG MORI! This vertical machining center is ideal for a wide range of milling applications, offering excellent performance when machining various materials. Key Features: • High rigidity and stability: Ensures precise machining results and long service life. • Large working area: Provides ample space for processing large workpieces. • High spindle speed: Enables fast and efficient machining operations. • Sturdy construction: Guarantees longevity and reliable performance. • CNC control: Equipped with a user-friendly CNC controller for easy programming and operation. Additional Information: • Year of manufacture: 2006 • Condition: good, used • Control: Heidenhain iTNC530 • Travel paths: 635 x 460 x 510 mm • Spindle speeds: 20 – 10,000 rpm Ideal for: • General machining • Tool and mold making • Single-part and small-batch production • Mechanical engineering Why choose this DMC 635? This machine has been regularly serviced and is in good used condition. It offers a cost-effective way to expand your machining capabilities and increase your productivity. Itsdpfx Asxm Smtjg Non

Condition: good (used), Used V. BAZ, DMG, type DMU 70 (3 axes) X-axis travel: 710 mm Y-axis travel: 520 mm Z-axis travel: 520 mm Iodpfjwa Dansx Ag Notn

Condition: like new (used), Year of construction: 2023, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, controller manufacturer: Siemens, total height: 2,800 mm, total length: 2,230 mm, total width: 2,665 mm, table width: 650 mm, table length: 850 mm, overall weight: 6,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 1,377 h, coolant supply: 20 bar, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is in as-new condition and available for immediate delivery. 3-axis geometry is within manufacturer tolerances. The main spindle runs smoothly and is in as-new condition with 0.003 mm runout. Retention force is also good at 8 kN. Lubrication and hydraulic oils have been replaced. All functions have been tested. Of course, the machine can be inspected and tested on site. Transport and installation are available at extra cost and by arrangement. The machine is equipped with all options available on an M1. Chip conveyor / coolant system / internal coolant 20 bar / air through spindle center Itodpfxewytmks Ag Njn Manual wash gun Renishaw OMP 60 probe TS27 tool measurement Machine hours: 14,150 hours / automatic mode: 1,377 hours, mostly aluminium machining.

Condition: good (used), Year of construction: 2010, functionality: fully functional, DMG DMC 1035 V Year of manufacture: 2010 Control: Siemens 840 D Shop Mill Power-on hours: 32,921 h Program run hours: 11,517 h TECHNICAL DATA Travel range X-axis (longitudinal): 1035 mm Y-axis (transverse): 560 mm Z-axis (vertical): 510 mm Table working area: 1200 x 560 mm 4 T-slots: H12/100 mm 1 alignment slot: 14 H7 mm Max. table load: 1000 kg Drive power (40/100% duty cycle): 13/9 kW Torque (40/10% duty cycle): 83/57 Nm Spindle speed range: 20 – 10,000 rpm Tool holder (DIN 69871-1): SK 40 A Feed rate range (X, Y, Z): up to 20,000 mm/min Rapid traverse (X, Y, Z): 25 m/min Itsdpfxewwt Nae Ag Njn Tool changer with double gripper Chain magazine Magazine positions: 30 Max. tool diameter: 80/130 mm Max. tool length: 300 mm Max. tool weight: 6 kg Operating voltage: 400 V / 50 Hz Total connected load: 25 kVA Max. main fuse: 35 A Machine dimensions (W x D x H): 2.52 x 2.5 x 2.6 m Installation area: 6.9 x 5.4 m Machine weight: 4500 kg EQUIPMENT / ACCESSORIES - Chip and splash protection enclosure with sliding door, electrically safeguarded and workplace lighting - Automatic tool changer (double gripper/chain magazine) ATC 30 - Central lubrication - Spindle lubrication - Heat exchanger (working spindle) - Coolant/lubricant filtration system, 600 l, 20 bar belt filter - ICS – internal coolant supply through the tool - Switching from coolant to compressed air blow-off - Rinsing gun - Rotating inspection window - Chip conveyor with coolant reservoir - Infrared probe TS 649 - Tool measurement TT 140 - Electrical cabinet cooling - 4-color signal tower - Mounting elements - Documentation Condition: Good, predominantly used for aluminum machining

Condition: used, Year of construction: 2005, operating hours: 48,000 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, Equipment: chip conveyor, rotational speed infinitely variable, DMG DMU50, year 2005 5-axis machining center 3 + 2 axes (not simultaneous) Heidenhain iTNC 530 Spindle speed up to 10,000 rpm 30-position tool changer SK40 DIN69871 Chip conveyor Heidenhain infrared 3D probe Without vise Iodpfxsv U R Iie Ag Netn The machine can be inspected at our facility.

Condition: excellent (used), Year of construction: 2016, operating hours: 26,678 h, functionality: fully functional, This machine is available exclusively through Montrasio GmbH and is being sold on behalf of the authorized parties. DMG DMU 100P duoBLOCK – 5-Axis CNC Machining Centre (2016) Year of manufacture: 2016 Control: SIEMENS CELOS Travel / Capacities X-axis: 1,000 mm Y-axis: 1,250 mm Z-axis: 1,000 mm Workpiece diameter: 1,100 mm Workpiece height: 1,600 mm Workpiece weight: up to 2,200 kg Table / Axes Table size: 1,100 × 900 mm Table rotation speed: 35 rpm Max. table load: 2,223 kg B-axis universal milling head swiveling range: −30° to +180° Spindle / Tool Spindle speed: 0 – 12,000 rpm Spindle motor power: approx. 69 HP (≈ 51.5 kW) Spindle taper: HSK-A100 Tool magazine: 63 positions Machine Dimensions Footprint: approx. 24 m² Machine height: approx. 3,606 mm Machine weight: approx. 24,540 kg Accessories / Equipment CNC-controlled universal milling head (B-axis) Workpiece probe Itjdjxl Arkspfx Ag Njn Tool measurement system 3D Quickset Chip conveyor

Condition: like new (used), Year of construction: 2020, operating hours: 110 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 700 mm, DMG Mori Seiki LaserTec 50 FineCutting Sauer CNC Laser Precision Machine Year/Model: 2019 Control: Celos with Siemens 840D sl Operate CELOS with Siemens 840D sl Operate including 21.5" ERGOline control panel with multi-touch screen CNC laser precision machine with high-speed machining LASERTEC 50 FineCutting for fine laser cutting, laser drilling, laser welding NC swivel rotary table, highly dynamic and precise Ijdpfexmvr Tsx Ag Nstn Travel paths: 500 mm x 500 mm x 700 mm Integrated ytterbium continuous wave (cw) fiber laser 450 W QCW ytterbium fiber laser with 4500 W pulse peak power and 450 W average power Processing head (80 mm focal length), 5-axis transformation 100 working hours (as new) Included: Fanuc robotic automation + Keller automatic extraction system

Condition: good (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 16015791684, travel distance X-axis: 350 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed length X-axis: 60,000 mm, feed length Y-axis: 60,000 mm, feed length Z-axis: 60,000 mm, torque: 41 Nm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D SL, total height: 3,300 mm, total length: 2,900 mm, total width: 2,400 mm, table width: 400 mm, table length: 730 mm, overall weight: 6,000 kg, spindle speed (max.): 15,000 rpm, operating hours of spindle: 3,179 h, spindle torque (max.): 58 Nm, TECHNICAL DATA & EQUIPMENT: Operating voltage: 400 V Frequency: 50 Hz Rated current: 35 A Tool holder: BT 30 Tool clamping force: 3.5 +/-1.2 kN Feeds: infinitely programmable Travel measuring system resolution X-, Y-, and Z-axis: 0.01 µ Positioning uncertainty: 8 µ Itedpfjxm Tnrox Ag Nen Table with 2 T-slots as well as a GRESSEL brand clamping rail Jaw width: 90 mm Additionally, a 25-position tool changer including the tool holders shown in the photo and a touch probe Also included: a 4th axis (rotary table) from manufacturer LEHMANN and a robot cell from DMG MORI Type: WH 3 Year of manufacture: 2022 NOTES ON COLLECTION: Pick-up must be firmly scheduled between December 10 and 12 FCA Winterlingen, loaded onto truck

Condition: used, Year of construction: 2009, x-travel 800 mm y-travel 800 mm z-travel 800 mm control iTNC 530 Heidenhain Speed Mainspindle 50 - 18.000 min/-1 power capacity - main spindel 28 kW max. Torque 121 Nm tool taper HSK-A 63 Swivel range -30 / +180 ° table surface area dia. 900 x 700 mm max. table load 1.400 kg table speed 30 min/-1 rotatable C: 360 ° number of toolpositions 40 pos. tool taper HSK-A 63 max. tool diameter 230 mm max. tool length 450 mm max. tool weight 15,0 kg Iodpju Ag Irjfx Ag Notn rapid traverse ( X / Y / Z ) 60 m/min Feed force ( X / Y / Z ) 13 / 13 / 9 kN weight of the machine ca. 13,0 t dimensions of the machine ca. 5,5 x 3,5 x 3,5 m total power requirement 68 kVA 5 Axis Machining Center - Universal DMG DECKEL MAHO - DMU 80 P duoBLOCK - Swivel-Milling-Head (B-Axis) - NC-Rotary Table (C-Axis) - Application Tuning Cycle ATC - WITHOUT clamping devices

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 17 kVA, torque: 83 Nm, controller manufacturer: Heidenhain, controller model: Heidenhain TNC 620, total height: 2,665 mm, total length: 3,250 mm, total width: 2,779 mm, table width: 560 mm, table length: 1,200 mm, table load: 720 kg, overall weight: 4,100 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 9,000 rpm, number of spindles: 1, number of slots in tool magazine: 20, tool length: 300 mm, tool diameter: 80 mm, tool weight: 6,000 g, Equipment: documentation/manual, rotational speed infinitely variable, Used DMC 1035 V eco for sale – High-performance vertical machining center Upgrade your manufacturing processes with this robust and powerful DMC 1035 V eco from DMG MORI! This vertical machining center is ideal for a wide range of milling tasks and offers outstanding performance when machining a wide variety of materials. Key Features: High rigidity and stability: Ensures precise machining results and a long service life. Itsdpfxsxm Slvo Ag Nsn Large work area: Provides sufficient space for machining large workpieces. High spindle speed: Enables fast and efficient machining processes. Robust construction: Guarantees a long service life and reliable performance. CNC control: Equipped with a user-friendly CNC control for easy programming and operation. Additional Information: Year of Manufacture: 2010 Condition: Good, Used Control: Heidenhain TNC 620 Travel Range: 1,035 x 560 x 510 mm Speeds: 20 - 9,000 rpm Ideal for: General Machining Tool and Mold Making Single-Part and Small-Batch Production Mechanical Engineering Why this DMC 1035 V eco? This machine has been regularly serviced and is in good used condition. It offers a cost-effective way to expand your manufacturing capacity and increase your productivity.

Condition: like new (used), Year of construction: 2024, operating hours: 150 h, functionality: fully functional, Under 150 spindle hours!!! Including HAIMER Power Clamp Economic Plus NG shrink fit device, year: 2024 Including tool holders, clamping devices, and tools Manufacturer: DMG MORI SEIKI Model: DMU 50 3rd Generation, Stealth Design Control: CELOS with HEIDENHAIN TNC640 Year: 2024 Operating hours (approx.): Spindle hours: 140 h, Power-on hours: 790 h EQUIPMENT: - Swivel rotary table, simultaneous - Direct measuring systems and plane transformation in B and C axes - Scraper belt chip conveyor with cleaned gap sieve - Internal coolant supply (IKZ) - Coolant/air blow-off switchable via M-function - Rotating inspection window - Rinsing gun for chip removal - Oil and emulsion mist extractor Itodpfjxgh H Nox Ag Nen - Infrared probe, Renishaw Blue Power Probe Kit - Laser tool measurement Renishaw NC4 - Tool length and diameter measurement - Automatic cleaning of the measuring system by air blast - Calibration arbor for tool measurement - 3D quickSET - Quick stop for machine protection, MPC – Machine Protection Control - Automation interface, Profibus M65 - Automatic loading door - Work table with 4-channel rotary feedthrough - Machine-side automation software interface - Electronic handwheel - RMS sensor, internal handling - Digital Manufacturing Package - Messenger V4 - Service Agent - Direct path measuring systems in all axes TECHNICAL DATA: Travel paths: X: 650 mm, Y: 520 mm, Z: 475 mm Clamping area: D630 x 500 Swivel range: -35 to +110° Rotary axis: 360° Rapid traverse: 42 m/min, direct drive Tool holder: HSK-A36, BIG-PLUS compatible, speedMASTER® motor spindle Spindle speed: 20 – 20,000 rpm Spindle power: 35 kW/25 kW (40/100% duty cycle) Spindle torque: 130 Nm/86 Nm (40/100% duty cycle) Tool magazine: 60 slots, incl. setup aid for loading This used machine can be inspected under production conditions. All information without guarantee – sale excludes any guarantees and warranties. Subject to prior sale. Our general terms and conditions of sale and contract apply.

Condition: used, Year of construction: 2016, x-travel 600 mm y-travel 560 mm z-travel 510 mm Control Siemens SlimLine Max. rpm 12.000 min/-1 power capacity - main spindel 13 / 9 kW max. Torque 82 / 54 Nm tool taper SK 40 distance spindle nose and table 120 - 630 mm table surface area 900 x 560 mm max. table load 600 kg T-slots 5 work height max. 850 mm number of toolpositions 30 pos. tool taper SK 40 max. tool diameter 80 mm max. tool-dia with free toolbox 125 mm Iedpfx Agotqmnps Notn max. tool length 300 mm max. tool weight 8,0 kg rapid traverse 30 m/min feed power 5 kN feed speeds max. 30.000 mm/min total power requirement 32 kVA weight of the machine ca. 5,0 t dimensions of the machine ca. 4,0 x 5,0 x 3,0 m CNC - Machiningcenter Vertical DMG MORI - ecoMill 600 V - Operating hours: 6,516 h - Spindle hours: 2,868 h

Condition: used, Year of construction: 2008, x-travel 1.035 mm y-travel 560 mm z-travel 510 mm control 810 D Powerline Siemens Main spindle: turning speed range - main spindle 20 - 8.000 min/-1 power capacity - main spindel 13 / 9 kW max. Torque 83 / 57 Nm tool taper SK 40 work table: table surface area 1.200 x 560 mm max. table load 1.000 kg table height over floor 720 mm T-slots 4x H12 / 1x 14 H7 Tool-Presetter: number of toolpositions 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6,0 kg change time 1,6 sec change-time chip to chip 7,0 sec feeds: Itodpstzvy Tjfx Ag Nen feed speeds 20.000 mm/min rapid traverse 25 m/min total power requirement 17 kVA weight of the machine ca. 4,1 t dimensions of the machine ca. 4,0 x 4,0 x 2,5 m CNC - Machining Center Vertical DMG MORI SEIKI - DMC 1035 V ecoline - only 3.800 spindle hours