Used Dmu 35 for sale (192)

Condition: excellent (used), Year of construction: 2008, Vertical machining center Deckel Maho DMF 220 Linear Year of manufacture: 2008 Control: Siemens 840 D Technical specifications: CNC control: Siemens Sinumerik 840D Number of axes: 3 X-axis travel: 2,200 mm Y-axis travel: 560 mm Z-axis travel: 720 mm Max. clamping height: 600 mm Table size (LxW): 2,600 x 600 mm Max. table load: 2,200 kg Guideway type: Linear guide Max. power: 35 kW Tool holder: SK40 Tool magazine capacity: 60 Tool change time: 9.6 s The machine was in active serial production until recently and was predominantly used for machining steel and aluminum. Bedoy Nbbzspfx Aiweww Equipment: ⦁ Partition wall for setup time optimization (parallel machining / setup in one cabin half) ⦁ Conveyor belt filter system for coolant processing ⦁ Automatic tool changer ⦁ Generous working area for complex components

Condition: ready for operation (used), Year of construction: 2006, operating hours: 15,869 h, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530 E, spindle speed (max.): 12,000 rpm, number of axes: 4, This 3-axis DMG DECKEL MAHO 1035V was manufactured in 2006. It features an X-axis travel of 1,035 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine is equipped with a Heidenhain iTNC 530 control unit and has a tool magazine capacity of 30 positions. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO 1035V vertical machining centre we have for sale. Contact us for further details. - PLC Software-Nummer: 4B0000_HEDR_02C- Development status: L3- DSP1: 340514 03.1- ICTL1: 340517 01- Control On Time: 40,697 hours- Machine On Time: 38,700 hours- Program Run Time: 15,863 hours- 1st Axis Reference Point Time: 14,213 hours / 15,835 hours- Tool Changer Cycles Time: 1,585 hours- Spindle Taper: SK 40- Tool Magazine Capacity: 30 positions (Chain type)- Touch Probe: Heidenhain TS640- Electronic Handwheel: Heidenhain- Power Capacity: 35 kVA- Maximum Nominal Current (A Jn max): 50 A- Fuse / Input Current: 63 A- Mains Voltage: 400 V- Frequency: 50/60 Hz- Control Voltage: 230 V- Direct Current Supply: 24 V- Central Lubrication System: Vogel pump unit utilizing Divinol Lithogrease 000 fluid grease- Pneumatic Regulation Assembly: Integrated SMC / Festo air filtration and regulation unit- Chip Conveyor Not Included Technical Specification Bwjdpfxey Uvnye Aiwew Through-spindle Coolant No

Condition: ready for operation (used), Year of construction: 2005, operating hours: 20,729 h, functionality: fully functional, travel distance X-axis: 980 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel range X-axis: 980 mm Travel range Y-axis: 630 mm Travel range Z-axis: 630 mm Spindle speed range: 0–18,000 rpm Tool holder: HSK 63 MACHINE DETAILS Control system: Heidenhain iTNC 530 Clamping area: 1,250 × 700 mm Operating hours Machine operating hours: 46,922 h Program runtime: 20,279 h Spindle operating hours: 20,746 h EQUIPMENT Fixed angular table 3D measuring probe Heidenhain Tool measurement in the working area with BLUM laser Vertical tool changer with 32 magazine slots Full protective enclosure with sliding doors and interior lighting Electronic handwheel Bedpfx Aozmry Teiwoww Operating modes 3 and 4 Chip conveyor Coolant system 3 height-adjustable machine feet Spindle cooler Control cabinet cooler from Rittal Operating manuals

Condition: refurbished (used), Year of construction: 1999, Machining center Deckel Maho DMU200P - Available Immediately - Worldwide Export - new spindle: approx. 3.000 h Control: Heidenhain iTNC430 Travel: X-2000mm, Y-1800mm, 1,100mm clamping surface: 1,700 mm x 1,400 mm Spindle speed: 12,000 rpm Spindle mount: SK40 tool magazine: 60 seats chip conveyor: . probe: Hexagon electric handwheel: Heidenhain operating mode: 4 Internal coolant supply (IKZ) and chip removal package: 20 bar / 900 l Tool measurement: Blum Laser High-speed spindle attachment: 42.000 U/min automatic swivel milling head: B-axis NC rotary table: C-axis 3-D Quickset: , Bsdpjzz Ag Tsfx Aiwoww Tools: 60 x SK50

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! The spindle was replaced on November 14, 2018. TECHNICAL DETAILS Travel in the X-axis: 880 mm Travel in the Y-axis: 630 mm Travel in the Z-axis: 630 mm Spindle speed: 12,000 rpm Bsdpfozpw Iusx Aiwsww Controlled B-axis: -15° to +90° Tool holder: SK 40 Number of tool magazine slots: 32 MACHINE DETAILS Control system: Heidenhain iTNC 530 Spindle operating hours: 50,033 h EQUIPMENT Coolant system

Condition: excellent (used), Year of construction: 2008, operating hours: 9,521 h, Deckel Maho DMC 835V CNC Machining Center Year of manufacture: 2008 Control unit: Siemens 840D with Shopmill Travel (X/Y/Z): 835mm/510mm/510mm Spindle speed: 10,000 rpm Spindle power: 14kW Table dimensions (X/Y): 1000mm/560mm Table load capacity: max. 800kg Workpiece height: 720mm Tool stations: 20 Tool holder: SK40 Weight: approx. 4,500kg Operating hours: 9,521h Chip conveyor Bwjdpfoxxpcvsx Aiwow

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rotational speed (max.): 4,500 rpm, controller model: Heidenhain TNC 310, TECHNICAL DETAILS X-axis travel: 500 mm Bwjdpfx Aoywgtxsiwjw Y-axis travel: 400 mm Z-axis travel: 400 mm Tool holder: SK 40 Spindle speeds: 20-4500 rpm MACHINE DETAILS Control: Heidenhain TNC 310 Dimensions & Weight Space requirements: approx. 2.15 x 2.00 x 2.50 m Machine weight: approx. 3 t EQUIPMENT Swivelling rotary table Documentation

Condition: used, Year of construction: 2011, x-travel 835 mm y-travel 510 mm z-travel 510 mm distance spindle nose and table 120 - 630 mm control iTNC 530 ERGOLine Heidenhain turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW tool taper SK 40 DIN 69871 max. Torque 130 / 87 Nm table surface area 1.000 x 560 mm max. table load 800 kg number of T-slots 5 T-slot - width 14 mm T-slot - distance 100 mm number of toolpositions 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 250 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 30 m/min feed speeds 1 - 20.000 mm/min total power requirement 23 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m CNC - MachiningCenter Vertical Bodpfx Ajx R Em Deiwjww DECKEL MAHO - DMC 835 V New Design - 20,796h operating hours, 7,544h spindle hours

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain 430, workpiece weight (max.): 800 kg, The machine was recently inspected by a technician, and the following minor repairs were carried out: New cable routing, replacement of the display, and replacement of the sensor cable for the tool changer. TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 700 mm Travel range Z-axis: 600 mm B-axis: Automatic swivel milling head C-axis: NC rotary table (dimensions: 900 x 630 mm) Tool holder: SK40 Number of tool changer positions: 60 Maximum workpiece weight: 800 kg MACHINE DETAILS Control model: Heidenhain 430 Bwsdpfx Aisy Szq Uowsw EQUIPMENT Chip conveyor Internal cooling system (40 bar operating pressure) Handwheel Heidenhain TS 642 probe

Condition: used, Year of construction: 2013, x-travel 635 mm y-travel 510 mm z-travel 460 mm control Sinumerik 840 D SL Siemens turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW tool taper SK 40 DIN 69871 max. Torque 83 / 57 Nm tension force 8 kN table surface area 790 x 560 mm number of T-slots 4 + 1 T-slot - distance 100 mm T-slot - width 4x 14H12 / 1x 14H7 mm max. table load 600 kg table height over floor 720 mm Bjdoym Dz Rspfx Aiwoww distance spindle nose and table 120 - 580 mm number of toolpositions 30 pos. Max. mould width 80 / (130) mm max. tool length 250 mm max. tool weight 6 kg max. total weight 80 kg change-time tool to tool 1,6 sec change-time chip to chip 6,0 sec rapid traverse 30 m/min feed speeds 1 - 20.000 mm/min Feed force max. 5 kN total power requirement 28 kVA weight of the machine ca. 3,8 t dimensions of the machine ca. 3,5 x 4,0 x 2,7 m CNC - MachiningCenter Vertical DECKEL MAHO - DMC 635 V New Design - ShopMill - WITHOUT perforated plate - WITHOUT clamping device - WITHOUT tools

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, table width: 700 mm, table length: 500 mm, No minimum price – guaranteed sale to the highest bidder! Machining center with a manually rotatable and swiveling machine table! TECHNICAL DETAILS Travel ranges x-axis: 500 mm y-axis: 400 mm z-axis: 400 mm Table Table surface: 700 x 500 mm Spindle Tool holder: 40 SK/ISO Spindle speeds: 20 - 4,500 rpm Spindle drive: 12 kW Feed rates Feed rates: 5,000 mm/min Control system: Heidenhain TNC 124 MACHINE DETAILS Bwedpfx Aijzb Uz Djwow Total power requirement: 13 kW Machine weight: approx. 2,800 kg Space requirement: approx. 3 x 2 x 2 m

Condition: good (used), Year of construction: 2006, functionality: fully functional, Operating hours: 113520 h Total spindle hours: 58190 h (date: 3rd September 2026) In April 2026, a new milling spindle from DMG-MORI was installed. Since then only 25 running hours ! A recent accuracy test report is available. * 4-axes controlled Bjdjzvm Abjpfx Aiwjww * CNC control HEIDENHAIN iTNC 530 * Autom. swivel-type milling head (B-axis) +/- 105 deg. * 120-station ATC * Chip conveyor * Tool measuring device (laser) * Electronic handwheel * Control cabinet with air conditioning Machine will be sold without clamping devices, vise, and tools. Technical details x-travel 2500 mm y-travel 920 mm z-travel 820 mm Control Heidenhain iTNC 530 table surface area 3100 x 900 mm table load 3,0 t tool taper HSK-A63 spindle turning speed range 20 - 18000 rpm rapid traverse (X,Y,Z) 100 / 60 / 60 m/min main drive (S1/S6) 35 / 25 kW total power requirement 92 kVA weight of the machine ca. 25,6 t dimensions of the machine ca. 10,3 x 6,2 x 3,3 m

Condition: good (used), Year of construction: 2007, operating hours: 32,000 h, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, Machine is being sold on behalf of the customer and can be inspected under power. Machine location: Czech Republic (Brno) Manufacturer: Deckel Maho Model: DMC 635V Year: 2007 Approx. 32,000 operating hours Control: Heidenhain iTNC 530 Spindle mounting: SK40 Speed: 10,000 rpm Travel (X/Y/Z): 635 / 510 / 460 mm Clamping surface (table): 790 x 560 mm 30-position tool changer + Blum laser tool measurement + Paper band filter / ICS 20 bar / 600 l + Chip conveyor Bedpsylmdfefx Aiwoww Dimensions (approx.) LxWxH 260 x 390 x 240 cm Installation area 530 x 590 cm Weight: approx. 4,200 kg

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 8,000 rpm, spindle motor power: 13,000 W, number of slots in tool magazine: 20, number of axes: 3, This 3-axis DECKEL MAHO DMC 1035 V was manufactured in 2007. It features an X-axis travel of 1,035 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine is equipped with a tool changer that holds 20 positions and operates at a spindle speed of 20–8,000 rpm. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 1035 V vertical machining centre we have for sale. Contact us for further details. Bjdpjzv Sylsfx Aiwoww • Control: Heidenhain iTNC 530, 3D-Path / 3D-Contouring • Rapid traverse: 30 m/min • Main drive: AC 13/9 kW • Tool taper: ISO 40 / SK40 DIN 69871 • Tool clamping: DIN 69872 • Tool changer: 20 positions, SK40, double gripper • Table size: 1,200 × 560 mm • Measuring system: Direct measuring system X/Y/Z with air purge • Coolant / air blast: Switchable via M-function at spindle nozzles • Operation mode: Process monitoring with manual intervention • Software: Smart TNC incl. DZF and engraving cycle • Data communication: DMG Netservice Euro ISDN • Operating hours: 24,915.5 h (control ON) / 12,002.7 h (spindle ON) Technical Specification Taper Size ISO 40

Condition: used, Year of construction: 2007, x-travel 635 mm y-travel 510 mm z-travel 460 mm control iTNC 530 Heidenhain power capacity - main spindel 13 / 9 kW turning speed range - main spindle 20 - 10.000 min/-1 Torque 83 / 57 Nm tool taper SK 40 tension force 10 kN table surface area 790 x 560 mm number of T-slots 4 + 1 T-slot - width 4 x 14H12 / 1 x 14H7 mm T-slot - distance 100 mm max. table load 600 kg table height over floor 720 mm number of toolpositions 30 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm Bwsdpfx Aisyaci Hswow max. tool length 300 mm max. tool weight 6 kg Total weight, approx. max. 60 kg feed speeds max. 20.000 mm/min Feed force 5 kN input unit 0,01 mm rapid traverse 30 m/min total power requirement 20 kVA weight of the machine ca. 4,1 t dimensions of the machine ca. 4,5 x 4,0 x 2,8 m CNC-Machining Center Vertikal DECKEL MAHO - DMC 635 V - Spindle-Runtime only approx. 7.883h - Power-On approx. 23.023h

Condition: excellent (used), Year of construction: 1999, X-axis travel: 1,250 mm Y-axis travel: 880 mm Z-axis travel: 800 mm Bjdpfxogypabe Aiwoww Main spindle: Speed range – main spindle, max. 12,000 rpm Drive power – main spindle: 15 / 10 kW Table surface area: 1,500 x 1,050 mm Number of tool positions: 30

Condition: used, Year of construction: 2002, x-travel 880 mm y-travel 630 mm z-travel 630 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 kW Torque 130 Nm tool taper BT 40 DIN 69872 table surface area 1.250 x 700 mm max. table load ca. 500 kg table diameter 700 mm T-slots 11x 14 x 63 mm max. table speed 15 min/-1 number of toolpositions 32 (2x 16) pos. tool taper BT 40 max. tool diameter 80 / 130 mm max. tool-dia with free toolbox 160 mm max. tool length 315 mm max. tool weight 8,0 kg feed speeds 20 - 15.000 mm/min Bwjdo Ahkghspfx Aiwjw rapid traverse 12 m/min total power requirement 30 kVA weight of the machine ca. 9,0 t dimensions of the machine ca. 4,0 x 3,0 x 2,5 m CNC - MachiningCenter Universal DECKEL MAHO - DMU 80 T - 5-Axis - Rotary table in Fixed-Table - Retrofitting to SK 40 optionally possible!

Condition: used, Year of construction: 2009, x-travel . mm y-travel . mm z-travel . mm Bwjdpfxozdu Tde Aiwow control SIemens type 840 D ECOLINE Shopmill Tool changer 30 Fach dimensions of the machine ca. . m Workpiece width: Max. 550 mm Workpiece length: Max. 1300 mm Workpiece height: Max. 600 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2009, x-travel 835 mm y-travel 510 mm z-travel 510 mm CNC-control iTNC530 HEIDENHAIN table-size 1000 x 560 mm max. table load 800 kg spindle taper SK 40 spindle turning speed range 20 - 14.000 U/min feed stepless 1 - 20.000 mm/min rapid traverse 20 m/min Bedpfx Asy Ty A Ssiweww drive capacity - spindle motor 13 / 9 kW tool change unit 32 Pos coolant IKZ 25 bar voltage 400 V total power requirement 30 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 2,25 x 3,20 x 2,30 m chip conveyor 3,50 x 0,85 x 1,55 m coolant equipment 1,40 x 1,60 x 1,80 m spindle oil cooler 0,40 x 0,50 x 1,00 m - Serial-No.: 15415041384 - Machine ON: 72,882 h - Program Run: 25.267 h - control: HEIDENHAIN iTNC 530 - Linear scales in all 3 axis - electr. handwheel - Tool changer 30 pos. with double gripper - Chip conveyor - TSC with belt filter system - Coolant unit - new ball screw incl. bearings (X-Axis)

Condition: used, Year of construction: 2008, x-travel 1035 mm y-travel 560 mm z-travel 510 mm Control Heidenhain type iTNC 530 table surface area 1400x650 mm workpiece weight 1000 kg Bodpjyqvh Rjfx Aiwoww Tool changer . spindle taper ISO SK40 Spindle capacity 10 KW turning speeds 8000 U/min total power requirement 20 kVA weight of the machine ca. . t dimensions of the machine ca. . m Serial number: 15425033554 Chip conveyor 2 hydraulic vises Operating hours: 53005 Spindle hours: 12233 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Deckel Maho DMC 835V CNC machining center Bwedpozw Auvjfx Aiwjw Year of manufacture: 2008 Control system: Siemens 840D with Shopmill Travel range X/Y/Z: 835 mm / 510 mm / 510 mm Spindle speed: 10,000 rpm Spindle power: 14 kW Table dimensions X/Y: 1000 mm / 560 mm Table load capacity: 800 kg max. Workpiece height: 720 mm Tool positions: 20 Tool holder: SK40 Weight: approx. 4500 kg Operating hours: 9521 h Chip conveyor Handwheel

Condition: used, Year of construction: 2007, x-travel . mm y-travel . mm z-travel . mm control SIemens type Shopmill 840 D Tool changer 30 Fach dimensions of the machine ca. . m Workpiece width: Max. 550 mm Workpiece length: Max. 1300 mm Workpiece height: Max. 600 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Bedpfjzdu Ubox Aiweww If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2005, x-travel 750 mm y-travel 560 mm z-travel 600 mm Bwjdpfet Hw Trsx Aiwsw Control HEIDENHAIN iTNC 530 total power requirement 70 kW weight of the machine ca. 11.000 kg dimensions of the machine ca. m D E C K E L M A H O (Germany) Vertical CNC Machining Centre with high speed linear drives in 3 Axis and in double column design for high precision work Model DMC 75 V LINEAR Year 2005 _____ Working range: Longitudinal stroke X Axis 750 mm Vertical stroke Z Axis 600 mm Cross stroke Y Axis 560 mm Table clamping size 950 x 650 mm Max. Table load 1.000 kg Max. height of workpiece 600 mm Tool holder Cone HSK 63 Spindle (KESSLER) speeds 18,000 rpm Torque, max. 86/130 Nm Spindle run-up time / stop time 3.2 sec Feeds / Quickfeeds, X, Y and Z Axes max. 90,000 mm/min Feed force 11.000/9.500 N Axis acceleration, X / Y / Z Axes 15 / 12 / 18 m/s Spindle drive 25/35 kW Total electrical load, approx. 75 kW - 400 V - 50 Hz Weight, approx. 11.000 kg Accessories / Special Features: This machine is very interesting because of the very stable double Column Portal Design and with the modern linear technology for fast and powerful high precision work. * HEIDENHAIN modern CNC Control System Model iTNC 530 in 3 axes, with all the usual options, cycles and sub programmes. * Table moves only in x axis and allows a comfortable loading of heavy workpieces * 30-position disktype tool magazine for max. tool Ø 100, 140 and 200 mm x max. length 300 mm. Max. weight 10 kg. Cut-to-cut time 6 sec. Pick-Up by main spindle. * BLUM tool-breakage control, Blum Receiver for RENISHAW –Head, no head available. * Double linear motors ensure very fast feed motions and strong feed power, equipped with own cooling system. * KESSLER Milling Spindle, Liquid-cooled, steplessly programmable up to 18.000 rpm * Completely covered working area with 2 sliding doors, one with spin-type bull-eye. * KNOLL Coolant device with scraper-type chip conveyor and pressure pomp. * Spindle working hours approx. 23.000 h Condition : Very good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 2000, x-travel 880 mm y-travel 630 mm Bedpfx Ajzfaxheiwsww z-travel 630 mm weight of the machine ca. 8800 kg

Condition: used, Year of construction: 2007, x-travel 1350 mm y-travel 560 mm z-travel 510 mm Control Heidenhain iTNC 530 total power requirement 13 kW Bwjdpfezlb Dfsx Aiwsw weight of the machine ca. 5 t