Used Document Shredder for sale (8,699)

Condition: new, Year of construction: 2025, operating hours: 5 h, NEW - Arjes Impaktor 250 EVO 2 with a set of paddle shafts (green cuttings, wood). Discharge height: 3450 mm Belt width: 800 mm Hopper volume: 2.25 m³ Shaft length: 1500 mm Weight 14,500 kg Standard configuration Ljdpfxstql S Ts Afwohk Engine: Volvo-Penta, Stage V / 129 kW Hook lift Track drive Overband magnet with discharge hopper Water spraying for reduced dust widening Paddle shafts incl. quick-change cassette Crusher bars Factory paint finish in orange-grey Optional on request: Star shafts (tires, waste, plastic) Concrete shafts (building rubble, asphalt) Concrete crusher basket

Condition: like new (used), Year of construction: 2026, operating hours: 250 h, Engine: CAT C13 - Stage V - 400 kW - One pair of rotors, selectable, with a quick-change cassette. A: Concrete rotor Lhsdpfozpw Rcsx Afwok B: Star rotor C: Tangential rotor - Crushing chamber and wear plates - Track chassis - Discharge conveyor (width: 1,400 mm, discharge height: 5,500 mm) - Spiral cooler - Cross-mounted overband magnet - Water spraying system Standard equipment - Hydrostatic drive with load-controlled hydraulic motors - Hydraulic opening of the cover hood - Newly developed control system and display - Remote control with emergency stop - Paint finish: RAL 5010 Gentian Blue, RAL 7016 Anthracite Grey

Condition: good (used), Year of construction: 1996, Shredder Manufacturer: Weima Type: WL 4 Year of manufacture: 1996 Motor: 18.5 kW Lhjdpfxoztawyo Afwek

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 1,030 h, overall weight: 1,800 kg, Jensen A425 / Wood Chipper / Shredder / Chopper / Ø 20 cm • Manufacturer: Jenzen • Type: A425 • Year of manufacture: 10/18/2016 • Operating hours: 1030 hours • Brushwood shredder • Wood chipper • Shredder • Chopper • 2x knives, new • Front bearing, new • Flange shaft, new • Clutch for storage unit, new • Diameter of knife discs: 73 cm x 3 cm • Number of knives: 2 • Discharge chute, 360° rotatable – deflector flap, infinitely adjustable • Infeed opening: 24.5 cm x 20 cm • Stem diameter: 20 cm • Cutting length: adjustable from 5–20 mm • Chopping capacity: approx. 20 m3/h • Max. speed: 1000 • Permissible support load: 75 kg • Transport length: 1.20 meters • Transport width: 90 cm • Transport height: 2.10 meters • Total weight: 1800 kg • German machine • Immediately ready for use • This offer is non-binding and without obligation. Lhsdpszipw Uofx Afwok - Subject to prior sale, - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: excellent (used), Year of construction: 2018, operating hours: 8,011 h, functionality: fully functional, total length: 16,000 mm, total width: 3,000 mm, total height: 3,600 mm, overall weight: 40,600 kg, power: 360 kW (489.46 HP), Doppstadt DW3060K Büffel/Biopower/Type F/Selector HS-514/Shredder/Crusher/Industrial Shredder • Manufacturer: Doppstadt • Type: DW3060K Büffel • Year of Manufacture: 2018 • Operating Hours: 8011 hrs • Power: 360 kW/489 hp • Industrial Shredder • Engine: Mercedes Benz MTU OM471LA(6R 1300) EUROMOT IV, 6-cylinder diesel • Pneumatic spiral fan • Fuel tank: 2 x 300 liters • AdBlue • Telematics system • Crushing roller, size M • Length: 3 meters • Diameter: 80 cm • Tooth width: 7.4 cm • Tooth height: 8.5 cm • Number of teeth: 125 pieces • Throughput: 20-60 t/h, depending on the material • Magnetic belt • Track system: Strickland 335713-DK40-AA • 2 travel speeds • Loading height: 3.10 meters • Remote control • Central lubrication system • Transport length: 16 meters • Transport width: 3 meters • Transport height: 3.60 meters • Total weight: 40,600 kg • German machine • Ready for immediate use _____ Selector HS-514/Star screen with return conveyor Ledpjzimm Hjfx Afwehk • Screen size: 8-10 cm • 13 star shafts • Integrated support legs • The attachment is picked up by the machine and driven via the auxiliary hydraulics • Star shafts are reversible • Reversing mechanism: Hydraulic • Return system for larger materials • Discharge height: 3.10 meters • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos are not excluded. - Sale subject to our general terms and conditions.

Condition: new, machine/vehicle number: ZWS 600 SMART, The ZWS 600 SMART serves as a complement to the ZWS series. The series was designed as an economical solution, specifically for the shredding of wood residues in small and medium-sized woodworking companies. AT A GLANCE: Compact design Sturdy welded steel construction Large-volume hopper for material feed Solid steel rotor with bolted knife holders PLC control for fully automatic operation Technical data SMART 600: Infeed 600 x 840 mm Motor 11 / 15 kW Rotor diameter 250 mm Rotor speed 80 – 120 13 rotor knives Ljdpfjyr I Ifox Afwjhk Technical data SMART 600 S: Infeed 600 x 840 mm Motor 18.5 / 22 / 30 kW Rotor diameter 250 mm Rotor speed 80 – 120 26 rotor knives

Condition: new, machine/vehicle number: 12007, Technical data: Cutting area: 700 x 1300 mm Lhodpfxeyr Tpuo Afwok Number of cutting discs: 18 Cutting disc width: 65 mm Scrapers: 2 Drive power: 2x 15 kW, 400 V, 50 Hz Weight: 2900 kg

Condition: used, machine/vehicle number: 13398, Rotor diameter: 300 mm Rotor width: 1400 mm Rotor knives: 76 / 114 Stator knives: 1 row Infeed opening approx. 1400 x 1050 mm Ljdpfx Afoyr Tx Ajwjhk Drive motor: 2 x 30 kW

Condition: new, Dimensions with base frame: approx. 1500 mm x 1400 mm Feed speed: 27 m/min Rotor blades: 2 Stator blades: 1 Infeed cross-section: approx. 10 x 40 mm Lhjdoyr Tu Rjpfx Afwek Drive motor: 1.5 kW Weight with base frame = approx. 270 kg

Condition: used, machine/vehicle number: 14130, Rotor diameter: approx. 280 mm Rotor width: 500 mm Number of rotor blades: 16 Lhsdpfozrqpwex Afwsk Inlet cross-section: approx. 480 x 500 mm Drive motor: 15 kW

Condition: new, The AMIS twin-shaft shredder is equipped with a CNC-manufactured, heavy-duty grinding chamber that is fully bolted for easy maintenance. Both the machine housing and the bearings are protected by wear rings and plates. The geared motors drive the two hexagonal working shafts, which can be fitted with various interchangeable cutting discs. The two working shafts are mounted in large-sized SKF spherical roller bearings with lifetime lubrication. Optionally, an automatic, battery-powered continuous lubrication system for the main bearings can be installed. Special features The change of wear plates and scrapers does not require disassembly of the machine housing. Thanks to the horizontally split bearing plates, the rotors including the bearings can be inserted or removed from above in a very short time. This allows for quick and easy rotor changes with different cutting tools. The size of the grinding chamber can be modified with relatively little effort due to the bolted housing design. Motor configuration, gearbox size, installation position, and rotor speed can all be adjusted as required. Technical Data Cutting chamber: 600 x 1200 mm Number of cutting discs: 60 (made of Hardox) Cutting disc width: 19 mm Maximum cutting disc diameter: 295 mm Scrapers: 2 Drive power: 2x 15 kW, 400 V, 50 Hz Weight: 2,800 kg Electrical control The machine is operated via a modern Siemens S 7/1200 controller featuring an advanced 7-inch touchscreen display. Both geared motors are controlled depending on load, and feature a reversing operation. Three different control programs are available depending on the material and application. Ljdpeyr Tlpsfx Afwehk Options The machine can be tailored for a wide range of applications to meet customer requirements. A variety of options are available: Customized base frames Special hoppers Grinding unit with different tools/cutting discs (diameter, size, thickness, shape, material grade) Various drive power ratings Different gearbox sizes with variable speeds

Condition: new, ZHS 600 - 18.5/22 kW Rotor diameter: 400 mm Working cross section: 520 x 470 mm ZHS 850 - 30 kW Rotor diameter: 400 mm Working cross section: 800 x 820 mm ZHS 1100 - 37 kW Rotor diameter: 400 mm Working cross section: 1,080 x 1,040 mm ZHS 1400 - 55 kW Rotor diameter: 400 mm Working cross section: 1,400 x 1,380 mm ZHS 1500 - 90/110 kW Rotor diameter: 600 mm Working cross section: 1,360 x 1,430 mm ZHS 1700 - 75 kW Rotor diameter: 400 mm Lhsdpfx Afsyr I Irjwek Working cross section: 1,640 x 1,550 mm ZHS 2000 - 2 x 90 kW Rotor diameter: 400/600 mm Working cross section: 1,920 x 1,550 mm ZHS 2600 - 2 x 90 kW Rotor diameter: 400/600 mm Working cross section: 2,480 x 1,550 mm ZHS – economical all-rounders The ZHS series features a load-dependent, hydraulically actuated pusher that feeds material horizontally to the rotor in a slightly inclined position. The material is cut between the rotor and stator blades until it passes through the screen, which is bolted and mounted underneath the rotor. The interchangeable screen determines the final particle size. The shredded material can be discharged via conveyor belt, discharge screw, or pneumatically using an extraction system. The ZHS single-shaft shredders are designed for light to medium-duty applications in the plastics industry. Technical details: • Roller-mounted hydraulic pusher with horizontal movement • Bolted knives and knife holders • Optional segmented floor for particularly thin parts and materials • Rotor aggressiveness can be reduced or increased by bolting in filling pieces • Can be integrated in a two-stage system with a granulator as a pre-shredder

Condition: used, machine/vehicle number: 11403, Rotor blades: 2 x 7 stars Rotor width: 1200 mm Rotor diameter: 350 mm Lhedoyx Nlyjpfx Afwok Inlet: 850 x 1200 Power: 30 kW

Condition: new, The cost-effective single-shaft shredders of the ZWS series enable the realization of a wide range of size reduction tasks, such as a preliminary stage for subsequent briquetting, the production of wood chips for combustion, or re-introduction into the particleboard industry. Depending on throughput and material, the machines can be customized to meet specific requirements. Typical material for shredding includes: - Large panel and board offcuts - Wooden pallets Lhedpfxjyr I Ilo Afwek - Waste from joinery workshops - Packaging wood - Construction and demolition timber - Veneers, MDF, and particleboard

Condition: used, machine/vehicle number: 13299, Rotor diameter: 750 mm Lhodpoyr Twrsfx Afwok Rotor width: 1500 mm Number of rotor blades: 76 Stator blades: 1 row Inlet cross-section: approx. 1500 x 1500 mm Drive motor: 2 x 75 kW

Condition: used, machine/vehicle number: 10657, Rotor diameter: approx. 368 mm Lsdpfx Asznpc Usfwohk Rotor width: approx. 1270 mm Number of rotor blades: approx. 60 Stator blades: one row Drive motor: 37 kW

Condition: new, ZERMA single-shaft shredders of the ZPS series offer versatile applications. Lodpfoyr I Ixjx Afwjhk They are suitable for the size reduction of heavy and bulky parts that cannot be directly granulated by a granulator. The large and heavy rotor of the ZPS shredder series, combined with the low rotor speed and high torque, ensures low power peaks, thereby avoiding high energy costs. Single-shaft shredders from the ZPS series are designed for a wide range of applications. Depending on the specific requirements, the shredded material can be used directly in the processing operation or can be further granulated in a downstream granulator. The shredders of the ZPS series are equipped with a two-stage hydraulic system that prevents rotor blockage. The knives and knife holders are completely bolted to the rotor. Generously sized, externally mounted rotor bearings and a hydraulically tiltable screen basket come as standard on every shredder. The machines can be equipped or upgraded with numerous options, such as rotor cooling or Hardox wear protection. Compared to ZSS shredders, the machines of the ZPS series are equipped with a higher pressure unit, which optimizes the feed between pusher and rotor, especially for large-volume parts or pipes.

Condition: new, The solution for shredding large, long pipes and profiles. The ZRS series has been specifically developed for shredding pipes with diameters of up to 1,300 mm, made from various materials such as PE, PP, and PVC. These machines can shred plastic pipes up to 9 meters in length directly, without the need for prior cutting or sawing. The core components are rotors with diameters of up to 1,500 mm, which can be equipped with up to 206 cutting crowns and gently shred the material at low rotational speeds. Lhjdpfxoyr Tg He Afwok The pipe is loaded into an enclosed feed trough, where a hydraulic pusher presses it against the rotor. The pre-shredded material is then conveyed via a belt to a granulator, which processes it into granulate suitable for immediate use. The entire system is operated automatically via a central control unit. Additional advantages of the system include low energy consumption, the avoidance of power peaks, and reduced risk of accidents during pre-shredding.

Condition: new, GENERAL INFORMATION The ZIS series single-shaft shredders are characterized by their spacious cutting chambers, which owe their stability to a robust steel-welded construction. The rotor diameter is generously dimensioned at 457 mm. Rotor widths are available in 1200, 1500, and 2000 mm. The ZIS series retains all benefits of the ZSS series: drive via an oversized gearbox, reversible blades, bolted blade holders, durable externally mounted bearings, hydraulic screen cradle, easy handling, and technically advanced control systems. APPLICATIONS Lsdpfx Aoyr I I Sofwshk The ZIS series was primarily developed for large-volume hollow bodies such as IBCs, waste bins, pallets, rain barrels, etc. Additionally, the machine can be universally used for countless applications in the plastics and wood industries. Like all Zerma shredders, machines of the ZIS series can also be equipped with various wear protection options. ADVANTAGES 35% larger cutting chamber volume compared to the ZSS series Internally positioned hydraulic ram Increased ram speed in the return stroke Compact dimensions Blade holders bolted into rotor pockets

Condition: new, The Zerma ZCS shredder combines leading shredder and granulator technology in a single, compact unit. By developing the combination of shredder and granulator, ZERMA has successfully expanded its product portfolio. Through the interplay of the proven design and high torque of the single-shaft shredder with a highly efficient granulator, ZERMA is able to deliver a reliable and compact pre-shredding system. The shredder and granulator are driven separately, providing better process control throughout. To further improve efficiency, the ZERMA Smart Drive System is used to constantly monitor the load and adjust the current accordingly, resulting in reduced power consumption. The ZERMA ZCS can be used in any application where consistent quality in shredding and granulating is required. Typical applications include, but are not limited to, the following: Injection molding Thermoforming Blow molding Recycling Lhedpfxeyr Tg Ts Afwsk Extrusion Waste

Condition: new, ZXS 1500 – 2x75kW – Working cross-section: 1500 x 1490 mm ZXS 2000 – 2x90kW – Working cross-section: 1500 x 1900 mm ZXS 3000 – 2x110kW – Working cross-section: 1500 x 2700 mm ZXS Series: The single-shaft shredder for demanding shredding tasks. The machines are built extremely robust and deliver high throughput rates. Working widths from 1500 to 3000 mm and a rotor diameter of 750 mm are available as standard. Wide range of applications for the ZXS series: Lhsdpfxsyr Tf Ao Afwek Many other materials can be shredded and prepared for recycling with the ZXS series, such as old cables, PET bottles, paper and cardboard, etc. Let us advise you on how your material can be shredded and recycled.

Condition: used, machine/vehicle number: 13210, Rotor diameter: 750 mm Rotor width: 1500 mm Number of rotor blades: 76 Number of stator blades: 4 (1 row) Inlet cross-section: approx. 1500 x 1500 mm Lodpfxsy Di R Te Afwjhk Drive motor: 2 x 75 kW

Condition: used, machine/vehicle number: 13063, Rotor diameter: 350 mm Rotor width: 1200 mm Rotor blade: 66 Stator knives: 1 row Ledpfx Afjyr Tttjwehk Inlet cross-section approx. 1100 x 1200 Drive motor: 55 kW

Condition: like new (used), Year of construction: 2026, Special price for our demonstration machine Another machine, available immediately (ex works Neckartailfingen) Ljdpfx Aodwktkefwohk Approx. 8 operating hours. Suitable for shredding residual wood of all kinds, including pallet sections. Pallets must be prepared with a saw or chainsaw so that they fit upright into the hopper – see image 2. Ideally, the dimensions should be approximately 40x20x20 cm so that the wood can lie flat on the sliding bed. This is when the machine operates most effectively. A hydraulic slide runs along the bottom of the shredder, pressing the wood against the rotor depending on the load. The material is shredded until it passes through the screen basket. Throughput rate up to 200 kg per hour *depending on the screen and how well the material is prepared. *Conveyor belt and overband magnet available at an extra charge. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent slide control, Commodity code: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 ph. Blades: 15 pieces, can be rotated multiple times Optional double blade row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting unit opening 630 x 820 mm Filling volume approx. 0.6 m³ Hydraulically operated slide Screen hole size selectable (10 - 30 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg (depending on accessories) Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm Moisture content: < 30 % dry basis Standard features include: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start - Fast hydraulics - Auto. OFF when the rotor is idling - Speed 70-90 rpm for high throughput performance - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant - MADE IN GERMANY Options for shredder: - Raise the shredder by 30 cm (preparation for conveyor belt) + €2,080 net - Articulated conveyor belt + €8,770 net Horizontal part: 1200 mm Inclined part: 2500 mm Angle: Adjustable from 0-60 degrees Discharge height: approx. 2000 mm + - 100 mm - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - Extend hopper + €940 net - Eco-rings: + €1,980 net (recommended for more than 15% hardwood) - Special scraper + €990 net (recommended for veneer or paper) - Double blade row + €995 net Requirements for raw material: - The moisture content (dry basis) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: used, Year of construction: 2019, operating hours: 4,000 h, functionality: fully functional, overall weight: 20,000 kg, power: 202.26 kW (275.00 HP), fuel type: diesel, color: red, number of blades: 5, motor manufacturer: CAT, motor model: CAT C7.1, Shafts with 7/7 discs, each with 5 knives Crushing bar with comb Robust hooklift frame Wheel axle with drawbar Permanent overbelt magnet Water spray system Lodpjzh Hgwofx Afwohk