Used Document Shredder for sale (8,414)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 11,655 h, functionality: fully functional, machine/vehicle number: 11421, COMPLETE CONFIDENTIAL DOCUMENTS SHREDDING & BALLING PLANT Built by: - sorting table - infeed belt conveyor 8000x1000 mm; including infeed belt conveyor - VECOPLAN shredder VAZ1300MK; includes screen according to actual confidential shredding DIN norm - Outfeed combined screw and chain conveyor, conveying to the press baler Hjdjzhu Atopfx Abgjp - press baler IMABE H-80/50 - Dust exhaust & filtering system - Electrical cabinet for fully authomatic operation Includes: - Full internal cabling - Machines revised with new wear parts for the shredder - Dismantled - Loading into trucks

Condition: good (used), Wood shredder for sale Prepared for conveyor belt removal Ideal for shredding wood residues (all types of softwood) and pallets Includes hydraulic pusher Motor: 7.5 kW Rotor width: approx. 82 cm Weight: 1,460 kilograms Full load current: 32 amp Hodexbyx Tjpfx Abgjp Main fuse: 35 amp

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 55 h, Machine with special rotor Hedpfxsx Af Rdo Abgjp available immediately Advantages: + special rotor with reduced blade overhang, suitable for hard and soft materials + 22 kW motor + effective square blades *for pallets: up to a maximum of 10 pallets per hour *dependent on screen size and material. With smaller wood residues, significantly more. Motor: 22 kW; 400 V - 50 Hz - 3 phase, Screen: 15/20 mm or as agreed (10 to 40 mm possible) hydraulically operated slide Screen opening currently (15/20 mm) *can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star/delta start - fast hydraulics - auto. OFF when the rotor is idle - speed 70-90 rpm for high throughput - cycle control to avoid idle times - performance-enhancing step control of the hydraulic slide - Pertinax guides for hydraulic slide - vibration-damping machine feet - CE compliant The following options are available at an extra cost: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Inclined conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €6,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - extended feed hopper 1500x1500 mm + €3,480 net Requirements for the raw material: - The moisture content (as received) must be below 25% - The feed must be free of metals and mineral contaminants. Damage to the tools and/or increased wear may result.

Condition: as good as new (ex-display), Year of construction: 2025, Special price for our demonstration machine Another machine, available immediately (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding residual wood of all kinds, including pallet sections. Pallets must be prepared with a saw or chainsaw so that they fit upright into the hopper – see image 2. Ideally, the dimensions should be approximately 40x20x20 cm so that the wood can lie flat on the sliding bed. This is when the machine operates most effectively. A hydraulic slide runs along the bottom of the shredder, pressing the wood against the rotor depending on the load. The material is shredded until it passes through the screen basket. Throughput rate up to 200 kg per hour *depending on the screen and how well the material is prepared. *Conveyor belt and overband magnet available at an extra charge. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent slide control, Commodity code: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 ph. Blades: 15 pieces, can be rotated multiple times Optional double blade row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting unit opening 630 x 820 mm Filling volume approx. 0.6 m³ Hydraulically operated slide Screen hole size selectable (10 - 30 mm) Suction nozzle Ø 160 mm Weight approx. 1,300 kg (depending on accessories) Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm Moisture content: < 30 % dry basis Standard features include: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start - Fast hydraulics - Auto. OFF when the rotor is idling - Speed 70-90 rpm for high throughput performance - Cycle control to avoid idle times - Performance-enhancing step control of the hydraulic slide Hsdpfx Asdwktkebgsp - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant - MADE IN GERMANY Options for shredder: - Raise the shredder by 30 cm (preparation for conveyor belt) + €2,080 net - Articulated conveyor belt + €8,770 net Horizontal part: 1200 mm Inclined part: 2500 mm Angle: Adjustable from 0-60 degrees Discharge height: approx. 2000 mm + - 100 mm - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - Extend hopper + €940 net - Eco-rings: + €1,980 net (recommended for more than 15% hardwood) - Special scraper + €990 net (recommended for veneer or paper) - Double blade row + €995 net Requirements for raw material: - The moisture content (dry basis) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: new, Year of construction: 2026, Delivery time approx. 3-4 months Shredder MRZ 830 Commodity code: 84659600 Feed opening 800x1000 mm Motor: 18.5/22 kW; 400 V - 50 Hz - 3-phase Blades: multiple, rotatable Hydraulically operated slide Screen opening as desired (10 - 40 mm) Suction nozzle Ø 200 mm Weight approx. 1,600 kg Dimensions (l x w x h) approx. 2290 x 1420 x 1750 mm Turbo coupling Standard features include: - Automatic star/delta starter - Fast hydraulics - Auto. OFF when the rotor is idle - Speed 70-90 rpm for high throughput - Cycle control to avoid idle times - Performance-enhancing stepped control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant The shredder is designed for shredding untreated wood, chipboard and MDF boards, and other materials after testing and approval by the manufacturer. Additional shredder options: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,140 net - Articulating conveyor belt + €8,770 net Horizontal section: 1200 mm Rising section: 2500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm + - 100 mm - Over-band magnet + €5,980 net - Control system for conveyor belt and over-band magnet + €2,750 net (Start and stop synchronized with the shredder) Requirements for the raw material: - Moisture content (as received) must be below 30% - Installation temperature: temperature-controlled room at a minimum of +5°C - Metals and mineral contaminants such as sand, stones, etc. will lead to increased wear. Hjdpfx Aed Dgw Usbgep

Condition: new, Year of construction: 2025, The ideal machine for shredding hardwood and softwood. Another machine, available immediately (ex works Neckartailfingen). Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Knives: 14 + 2 pieces, 40x40mm, can be rotated multiple times, Rotor diameter: 260 mm, Control: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume approx. 0.6 m³, Hydraulically operated slide Screen size optional (12 - 40mm) Suction nozzle Ø 160 mm Hsdpfed E R D Ssx Abgep Weight approx. 1,300 kg Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm The following options are available at an extra cost: - Additional knife row + €1,990 net (28 instead of 14) - Surcharge for four-sided segment bottom + €2,170 net (prevents the slide from jamming. Recommended for materials with a thickness of less than 3 mm) - Raise the shredder by 30 cm (preparation for a conveyor belt) + €1,980 net - Inclined conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control system for conveyor belt and overband magnet + €2,750 net (start and stop synchronized with the shredder) - Special bearing + €1,540 (rarely needed. Enclosed, even more stable rotor bearing. Possibly worth considering for sieves smaller than 15 mm or with a high proportion of fine material. If the bearings are lubricated with grease, this is not necessary if operated approximately every 2 weeks) Requirements for the raw material: - The moisture content (dry basis) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear. We would be happy to offer you a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight forwarder, and we will document the test with photos and videos.

Condition: as good as new (ex-display), Year of construction: 2025, showroom machine machine available Advantages: Hodpfodv Eu Hox Abgjp + special rotor with reduced knife protrusion + Motor 22 kW + effective square knife * for pallets: up to 10 pallets per hour * depending on the sieve and material. With smaller residual wood, significantly more. Engine: 22 kW; 400 V - 50 Hz - 3 ph, Sieve: 15/20 mm hydraulically operated slide Current screen perforation (15/20 mm) * can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: The color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star / delta start - fast hydraulics - automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - cycle control to avoid idle times, - performance-increasing step control of the hydraulic slide, - Pertinax guides for hydraulic slides, - vibration-damping machine feet, - CE conform. The following options are available at an additional cost: - Additional row of knives + € 2,790 - segment bottom + € 6,890 (recommended for materials with a wall thickness thinner than 3 mm) - Special K-rotor storage + € 3,480 If necessary, consider shredding plastic with sieves smaller than 15 mm or with a lot of fines. If the bearings are lubricated with grease every approx. 4 weeks in operation, this is not necessary) - Raise the shredder by 30 cm (preparation for conveyor belt) + € 2.480 net - Angled conveyor belt (discharge height approx. 220 cm) + € 12.980 net - Overbelt magnet + € 5.980 net - Control conveyor belt and overbelt magnet + € 2.750 net (Start and stop synchronized with the hacker) - Exhibition hopper 1500x1500 mm + € 3.480 net Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: as good as new (ex-display), Year of construction: 2024, The ideal machine for shredding cables, including optimized cutting geometry, approximately 9 operating hours. Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Knives: 14 pieces, 40x40mm, multi-rotatable, Rotor diameter: 260 mm, Hsdpfogmfa Aex Abgsp Control: Omron PLC, Cutting chamber opening 600 x 800 mm, Hopper volume approx. 0.6 m³, Hydraulically actuated slide Screen size optional (15 - 40mm) Extraction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (l x w x h) approx. 1737 x 1167 x 1650 mm The following options are available at an additional cost: - Double knife row + €1,990 net (28 instead of 14) - Surcharge for 4-sided segment base + €2,170 net (prevents the slide from jamming. Recommended when shredding plastics, paper, veneer with a thickness of less than 3 mm). - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Inclined conveyor belt (discharge height approx. 220 cm) + €8,770 net - Over-band magnet + €6,980 net - Control for conveyor belt and over-band magnet + €2,750 net (Start and stop synchronized with the shredder) Bea9ia3l27 Requirements for the raw material: - Mineral impurities such as sand, stones, etc. lead to increased wear. We would be happy to offer a free test with your material. We invite you to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight forwarder and we will document the test with photos and videos.

Condition: used, Year of construction: 1999, operating hours: 1,200 h, filling opening width: 1,000 mm, filling opening length: 1,250 mm, No. 04531 Four-shaft shredder WEIMA ZM 30 Used, year of construction 1999, approx. 1200 operating hours, machine in very good condition The four-shaft shredder is designed for bulky and very long wood waste, such as boards, pallets, packaging materials and cardboard of all kinds. Various plastics can also be shredded with this machine. The wood chips produced can be used directly for heating. Special secondary crushers excessively long chips. Hopper opening 1250 x 1000 mm LW Cutting unit width 462 mm Cutting unit length 562 mm Cutting disc diameter 235 mm Speed approx. 25 rpm 2 motors, each 7.5 kW Throughput capacity between 350 - 1250 kilograms per hour (depending on material and screen hole diameter) Screen hole diameter 20 mm Fuse protection 50 / 63 A Extraction connection diameter 200 mm GS-tested, CE-compliant Hsdpfxoy Tpg Ts Abgop The cutting tools can be sharpened using an angle grinder and round grinder (see operating manual). The entire cutting unit can be replaced. Incl. technical documentation Incl. electrical connection cable with plug Transport dimensions approx. 1450 x 1250 x 2150 mm LWH Weight approx. 1300 kg To avoid any misunderstandings, an on-site inspection by prior appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or dispatch Delivery terms: Ex warehouse

Condition: used, Year of construction: 2020, operating hours: 602 h, Arjes IMPAKTOR 250 - 2 sets of shafts - INCL. STAR SHAFTS Year of construction 2020 Hours 602 Original paddle shafts - Armored. Included and mounted, W-E-R-T original star shaft (only 15h - like new) Easy to repair in contrast to the original paddle shaft. Heder Epxlspfx Abgep Ideally suited for: - Wood - old wood - Rootstocks - tires - Light building rubble Tracked undercarriage and hook lift version Length (mm) 7,700 / 7,300 (transport) Width (mm) 2,300 / 2,300 (transport) Height (mm) 3,500 / 2,800 (transport) Total weight (kg) 14,000 DRIVE EU US ROW* Engine type (Volvo Penta) Exhaust emission standard EU Stage V Bonfiglioli transmission OUTPUT BELT Discharge height (mm) 3,450 Width (mm) 800 Including overbelt magnet and water spraying system SHREDDING UNIT Hopper volume (m3) 2.25

Year of construction: 2021, condition: new, machine/vehicle number: 2021102613, Aluminum angled conveyor belt with substructure Conveyor length: 2000mm flat + 2200mm rising Pitch angle in bend 45°C Discharge height: approx. 1800mm Height of the horizontal top edge 200mm PU conveyor belt Conveyor belt EM 9/2 0+05 PU petrol matt Belt width 500mm 21 pcs. T30 studs welded - pitch 310mm * antistatic due to threads in the fabric on the underside endlessly welded with stepped finger connection 40mm sidewall high-frequency welded on both sides * edge-free zone on both sides for tape guidance in the incline Hsdjh Eld Espfx Abgsp Full-surface underlay sheet Drive: Motor approx. 1.1KW Belt speed approx. 0.4m/sec * optionally controllable with frequency converter Connection 220/400V, 50Hz protection class IP54

Condition: excellent (used), total power requirement 31,7 kW main drive 7,5 kW Input width 550 mm Hodpfoyvvtrsx Abgjp ca. 25/75 mm ventilator 22kW / 10.800 m³/h Industrial shredder or shredding line equipped with carbide blades for shredding various materials such as wood, cardboard, fiberglass mats, or similar items, e.g., as a pre-treatment step for recycling processes. The system consists of two feed conveyors, the shredder, a transport fan, and a soundproof enclosure.

Condition: good (used), Year of construction: 1991, power: 22 kW (29.91 HP), suitable for pallets or other residual material Hedpfx Aot Tvk Ajbgsp Rotor width = working width 98 cm 22 kw motor with discharge auger

Condition: used, Year of construction: 1986, total length: 1,900 mm, total height: 2,420 mm, total width: 1,700 mm, Colour: Grey Hsdpey Dthvsfx Abgep Empty weight: 2.000 kg - Year: 1986 - Documentation available: No - CE certificate present: No - Serial number: 70.144 - Main motor power [kW]: 45 - Rotation speed [rpm]: 1470 - Rotor width [mm]: 780 - Number of shafts [pcs.]: 1 - Opening width [mm]: 440 - Opening length [mm]: 6500 - Sieve perforation [mm]: 7 - Number of fixed knives [pcs.]: 10 - Transport dimensions: 1900mm x 1700mm x 2420mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), CATALOG NUMBER 7725 TECHNICAL DATA - Loading hopper inlet 1200x1000mm - Outlet for shredded wood ø 200mm - Rotor working width 980mm - Main motor 22kW - Number of knives 24 pcs - Knife dimensions 30x30mm - Screen 16/11mm - Feed drawer - Electric auto-reverse - Dimensions (L/W/H) 2600x2000x1720mm - Weight 2125kg ADVANTAGES – German production – Auto-reverse – Feed drawer – Very good condition Hsdpfozadxpjx Abgep – Used wood shredder Net price: 95,900 PLN Net price: 22,830 euro depending on exchange rate, 4.2 euro (Prices may vary in case of significant fluctuations)

Condition: excellent (used), Year of construction: 2018, Catalogue number 7974 TECHNICAL DATA - Infeed opening of widened hopper: 1500x1730mm - Discharge outlet for shredded wood: 200mm diameter - Rotor working width: 990mm - Main motor: 22kW - Pump motor: 0.75kW - Number of knives: 54 pcs - Knife dimensions: 40x40mm - Screen: 20mm - Hydraulic feed drawer - Electric auto-reverse - Dimensions (L/W/H): 2500x2200x2350mm - Weight: approx. 2000kg ADVANTAGES – German made - Pulse feed pusher - Halfway pusher - Fast/forward pusher – automatic feed drawer speed adjustment – Original DTR documentation + CE, year 2018 – Hydraulic feed drawer – Auger – screw conveyor for chip transport Hodpfxezadxce Abgsp – Auto-reverse – Used chipper, in very good condition Net price: 115,900 PLN Net price: 27,600 EUR based on exchange rate 4.2 EUR (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number 7411 Hsdpfozadvzjx Abgsp TECHNICAL DATA - Infeed width: 400 mm - Infeed height: 180 mm - Shaft width: 430 mm - Shaft diameter: 430 mm - Knife length: 430 mm - Number of knives: 2 pcs - Screen dimensions: 60x60 mm - 2 gear-driven feed rollers from below - Lower feed roller motor: 1.5 kW - Gear-driven feed roller from above - Upper feed roller motor: 1.5 kW - Belt feeder - Belt feeder length: 2250 mm - Belt feeder width: 400 mm - Main motor: 30 kW - Auto-reverse - Overall dimensions (L/W/H): 4300x1630x1000 mm - Weight: 1800 kg - German made - Auto-reverse (adjustable) - Used chipper, in very good condition Net price: 69,900 PLN Net price: 16,640 EUR based on rate 4.2 EUR (Prices may change with higher fluctuations)

Condition: excellent (used), CATALOG NUMBER 7899 Technical data: - Chipper intake section: 410mm x 180mm - Shaft width: 430mm - Shaft diameter: 400mm - Number of knives: 2 pcs - Sieve size: 60x60mm - Upper feed roller, toothed - Lower feed rollers: 2 units, toothed - Infeed belt length: 2180mm - Infeed belt width: 400mm - Autoreverse (adjustable) - Main motor: 30kW - Feed motor: 2×2.2kW - Machine dimensions (L/W/H): 4300x1600x1100mm - Weight: approx. 2000kg ADVANTAGES – Italian manufacture – Non-painted Hedpezadvhofx Abgop – Electric adjustment of body height – Used multi-blade saw, very good condition Net price: 69,900 PLN Net price: 16,640 EUR with the exchange rate of 4.2 (Prices subject to change with significant fluctuations)

Condition: excellent (used), Catalogue number 7973 Hjdpfx Abszaduqsgsp TECHNICAL DATA - feed opening width: 410mm - feed opening height: 210mm - shaft width: 430mm - shaft diameter: 330mm - knife length: 430mm - number of knives: 2 pcs - screen dimensions: 50x50mm - lower toothed feed shaft - lower shaft motor: 1.1kW - upper toothed feed shaft - upper shaft motor: 1.1kW - vibrating chute - vibrating chute length: 4160mm - vibrating chute width: 370mm - main motor: 45kW - auto-reverse (adjustable) - reverse mode - machine overall dimensions (L/W/H): 2150x1450x1050mm - vibrating chute overall dimensions (L/W/H): 4160x650x880mm - weight approx. 2500kg ADVANTAGES – German manufacture – Auto-reverse (adjustable) – protects the machine from blockage and damage in case of overload – Reverse mode – DTR technical documentation – Used shredder, in very good condition Net price: 73,900 PLN Net price: 17,600 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in the case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7897 Technical data: - inlet width 400mm - inlet height 160mm - shaft width 530mm - shaft diameter 530mm - knife length 530mm - number of knives 2 pcs - screen dimensions 65x65mm - lower toothed feed roller - lower roller motor 2.2kW - upper toothed feed roller - upper roller motor 2.2kW - belt feeder - feeder belt length 2200mm - feeder belt width 400mm - main motor 45kW - auto-reverse (adjustable) - overall dimensions (L/W/H) 4400x1600x1630mm - weight approx. 3000kg ADVANTAGES – German made – auto-reverse (adjustable) – DTR technical documentation – used shredder, very good condition Net price: 75,900 PLN Hjdpfx Abjzadudogsp Net price: 18,070 EUR depending on EUR/PLN rate 4.2 (Prices may change in case of higher fluctuations)

Condition: excellent (used), CATALOG NUMBER 7613 Technical specifications: - Feed opening width: 650mm - Feed opening height: 300mm - Shaft width: 660mm - Knife length: 660mm - Number of knives: 2 pcs Hjdezadr Njpfx Abgop - Screen dimensions: 90x100mm - 2 lower toothed feed rollers - Lower roller motor: 3kW - 2 upper toothed feed rollers - Upper roller motor: 3kW - Belt feeder - Feeder belt length: 2700mm - Feeder belt width: 630mm - Main motor: 75kW - Autoreverse - Reverse gear - Overall dimensions (L/W/H): 5350x1300x1300mm - Weight: 4200kg FEATURES – Made in Italy – Autoreverse (adjustable) – Reverse gear – Used chipper, in very good condition Net price: 149,900 PLN Net price: 35,690 EUR (based on 4.2 PLN/EUR) (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number 7975 Hjdpfx Abjzadb Rjgjp TECHNICAL DATA - Infeed width: 450 mm - Infeed height: 250 mm - Shaft width: 530 mm - Knife length: 530 mm - Number of knives: 2 pcs - Sieve dimensions: 50x50 mm - 2 toothed feed rollers from below - Lower feed roller motor approx. 2.2 kW - Toothed feed roller from above - Upper feed roller motor approx. 2.2 kW - Conveyor belt - Conveyor belt length: 6500 mm - Conveyor belt width: 400 mm - Main motor 37 kW - Conveyor motor 0.37 kW - Autoreverse (adjustable) - Overall machine dimensions (L/W/H): 2400x1300x1100 mm - Conveyor overall dimensions (L/W/H): 6600x610x550 mm - Weight approx. 2500 kg – German manufacture – Autoreverse (adjustable) – protects the machine from blockage and damage in case of overload – With 6500 mm conveyor – Used shredder, in very good condition Net price: 115,900 PLN Net price: 27,600 EUR based on 4.2 EUR rate (Prices may change with significant currency fluctuations)

Condition: good (used), HSM ProfiPack P425 Cardboard Shredder This machine produces filling material from cardboard waste. Made in Germany. In like-new condition, the machine is ready for production. Description: This high-performance filling material machine processes multiple layers of cardboard into padding mats or filling material, depending on your needs. The cardboard is simultaneously scored and profiled, creating a flexible mat of the desired width. The machine is equipped with casters for easy relocation. Advantages: – Hardened cutting rollers made of solid steel Hodpfx Abszdawijgjp – Strong and efficient drive suitable for continuous operation – Adjustable material feed speed – Adjustable output material volume – Infinitely variable working width adjustment with a scale allowing for cutting filler material to any size – Intuitive operation via a durable control panel with LED messages – Integrated turbo function prevents blockages – Safe operation thanks to a safety switch – Equipped with wheels with brakes – Strong drive enabling cutting of 2-3 sheets of cardboard – Weight: 175 kg – Dimensions (H x L x W): 1040 x 570 x 770 mm

Condition: not inspected (used), Year of construction: 2011, operating hours: 7,219 h, overall weight: 22,000 kg, operation weight: 22,000 kg, Husmann HL2 1622/2 Twin Shaft Shredder/Crusher/Reducer • Gearbox defect: No power transmission between the right shaft and the gearbox. • Manufacturer: Husmann • Model: HL2 1622 • Year of manufacture: 2011 Hjdpfsy I Upiex Abgsp • Operating hours: 7,219 h • Power: 354 kW / 481 HP • Engine: CAT C13 • Hopper dimensions: 2,500 x 6,400 mm • 1,600 x 2,260 mm, covered with cutter shafts • 16 to 64 blades • Blade width: 50 mm • Bolt-on cutter blades • Shaft diameter: 660 mm • Shaft length: 2,260 mm • Overall length: 10,200 mm • Width: 2,500 mm • Height: 2,650 mm • Feed height: 2,650 mm • Total weight: 22,000 kg • German machine • This offer is not binding and is subject to prior sale. - Subject to prior sale, - Errors and/or typos excepted. - Sale according to our terms and conditions.

Condition: reconditioned (used), Year of construction: 1990, functionality: fully functional, Spoerri shredder, 720 mm rotor width, motor power 18.5 kW, feed opening 720 x 860 mm. Hsdsza Dc Iopfx Abgjp