Used Double Miter Saw for sale (15,744)

Condition: new, Year of construction: 2026, Crosscut and Mitre Circular Saws Type ZS 200NF Crosscut and mitre circular saw with a maximum cutting height of 200 mm Robust grey cast iron construction Precise ball bushing guidance of the tool carriage on hardened and ground steel shafts Manual saw feed Quick mitre adjustment up to 65° horizontally and 60° vertically Adjustable fixed stops Lower saw blade guard connectable to extraction system Machine mounted on mobile machine base with 1.5 m long roller conveyors on both sides (left and right) Left side equipped with scale and stop slider Technical Data Motor 400 V / 5.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Mitre range horizontal 45°- 90°- 25° Mitre range vertical 60°- 90°- 30° Saw blade Ø 520 mm (not included as standard) Extraction port 100 mm Weight 490 kg Bwedpfxew Hl Aqe Adyor Location: In stock at 54634 Bitburg - Immediately available - On request, we are happy to offer the saw blade as well.

Condition: excellent (used), CATALOG NUMBER 7881 Technical data: - Cutting height: 30-200mm Bedpfxezh Ip Te Adyjwr - Max saw blade diameter: 350mm - Spindle diameter: 70mm - Max cutting width of wood: 500mm - Working width of arbor with saws: 400mm - Minimum length of cut wood: 1000mm *Top: - Anti-kickback devices - 4 toothed feed rollers – pneumatically pressed *Bottom: - Sliding roller - Anti-kickback devices - Toothed feed shaft, 2 pcs - Arbors with saws - Toothed feed shafts, 2 pcs - Infinitely adjustable feed speed via frequency inverter - Feed motor: 3kW - Main motors: 2x55kW - Extraction outlet diameter: 250mm - Machine dimensions (L/W/H): 2150x1880x1800mm - Machine weight: approx. 3500kg ADVANTAGES – Made in Poland – Double-arbor multi-blade saw, 2x55kW – Original DTR + CE documentation – Used multi-blade saw in very good condition Net price: 88,900 PLN Net price: 21,200 EUR (based on the rate of 4.2 EUR) (Prices may change with significant rate fluctuations)

Condition: good (used), Year of construction: 1998, machine/vehicle number: 19188-98, Offer 25416 Technical data: Bwsdpfx Adjzqtwuoyer - Cutting range at 90° round: 260 mm - Cutting range at 90° flat: 410 x 200 mm - Miter adjustable left + right: 90 to 30° - Cutting range at 45° right + left round: 220 mm - Cutting range at 45° right + left flat: 230 x 300 mm - Material support height: approx. 620 mm - Saw band dimensions: 3660 x 27 x 0.9 mm - Cutting speed: 17 - 106 m/min - Hydraulic lifting and lowering of the saw frame - Upper stroke limit of the saw frame - Cutting pressure continuously adjustable: 0 - 10 m/min - Hydraulic material clamping device - Saw band cleaning brush - Micro-spray coolant system - Total drive power: 400 V / 1.9 kW - Roller table length: 3300 mm - Space requirement with base frame: W 5200 x H 1600 x D 2000 mm - Weight with base frame: 1900 kg

Condition: good (used), Year of construction: 1998, functionality: fully functional, total length: 2,680 mm, total width: 2,350 mm, total height: 1,350 mm, type of input current: AC, overall weight: 1,800 kg, cutting range round steel at 45°: 300 mm, cutting range round steel at 90°: 325 mm, saw band length: 4,400 mm, saw band width: 34 mm, working height: 750 mm, cutting speed: 150 mm/min, height adjustment type: hydraulic, Technical data: Clamping range bundle tension: Width: 0 - 300 mm Height: 5 - 300 mm Material insertion: Single 0 - 600 mm Multiple 0 - 9999 mm Remaining piece length: Manual: approx. 70 mm Automatic: approx.: 300 mm Cutting speed: 15 to 150 m/min - AC drive Cutting pressure: infinitely variable hydraulic Lowering speed: 0 to 300 mm/min - infinitely variable Saw blade dimensions: 4400 x 34 x 1.1 mm Saw blade tension: With torque wrench Weight of the machine: approx. 1800 kg (net) Machine dimensions: Length x width x height approx. 2680 x 2350 x 1350 mm Max. Support weight: Material weight max. 250Kg/m Working height: 750 mm With support elements approx. 800 mm (optional) Bodeq Atyzopfx Adyowr Noise emission: 74 dB(A) Measured at the operator's workplace Including the two roller conveyors shown.

Condition: good (used), Stop, depth stop, length stop for miter saw, pull saw... -Receiver: Bosch profile -Length Unit of measurement: 2000 mm -Price: complete -Dimensions: 2215/100/H1000 mm Bsdpodapm Rofx Adyswr -Weight: 10 kg

Condition: good (used), Crosscut and miter saw, pull saw, crosscut saw, panel saw, crosscut and miter saw, radial saw, radial arm saw -Manufacturer: Elu, cross-cut and miter saw with table on solid base, mobile -Type: MGS 72 -Motor power: 0.85/1.2 kW -Speed: 1050/2100 rpm -Saw blade: Ø 305 mm Bedpfepcmthox Adyswr -Cutting height: max.110 mm -Cutting width: max. 120 mm -Miter. 45° on both sides -Dimensions: 2100/840/H1180 mm -Total weight: 190 kg

Condition: excellent (used), Catalog number: 8048 TECHNICAL DATA - max. blade diameter: 400 mm - blade bore diameter: 30 mm - blade guard Bsdpfxjzp N Ime Adyjwr - cutting height: 100 mm - max. cutting width: 640 mm - possibility of angled cutting in the vertical plane - arm movement or blade movement - arm rotation: right/left - motor: 400 V, 3 kW - table dimensions: 1600x950 mm - dust extraction nozzle diameter: 60, 100 mm - dimensions (L/W/H): 1500x1600x1500 mm - weight: 240 kg ADVANTAGES - Made in Italy - Unpainted - DTR documentation available - Very good condition - Used saw Net price: 9500 PLN Net price: 2270 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant exchange rate fluctuations)

Condition: new, Semi-automatic miter saw SALVAMAC LEGEND 500 Cutting height max. 125mm Introductory special price Includes: - Semi-automatic miter saw SALVAMAC LEGEND 500 Cutting height max. 125mm SAFE - SOLID - FAST The compact, simple, robust and innovative machine guarantees maximum safety, flexibility and reliability. Standard accessories: - Automatic protection and pressure device - Ergonomically positioned 2-hand control - Protective shield, rigid - incl. HM saw blade 500 mm Z = 108 Technical data: Maximum cutting area: 220 x 125 / 260 x 100 / 285 x 80 / 310 x 50 mm Saw motor: 5.5 kW Saw blade diameter: 500 mm Rotation speed: 2,800 rpm. Compressed air: max. 8 bar Air consumption per cycle: 5 Nl Extraction nozzle: 1 x 120 mm / 1 x 100 mm Voltage: 400 V / 50 Hz / 3 Ph. Working height: 900 mm +/- 20 mm Minimum distance between stop (left side) and saw blade: 70 mm Minimum distance between stop (right side) and saw blade: 520 mm Minimum distance between 2 stops (optional): 60 mm Note: Basic price without roller conveyors. When setting up the saw, a support table or roller conveyor must be installed at least 1 m to the left and 1 m to the right of the saw. Included: - Roller conveyor without scale on the right, per meter Roller conveyor 320mm wide, with 100mm stop ruler and galvanized rollers, load capacity 230 kg, diameter 60 mm, distance 250 mm, right of the saw, price per meter Note: 1 m and 2 m long roller conveyors can be retrofitted. Include: - Roller conveyor with stop ruler and scale on the left, per meter Roller conveyor 320mm wide, with 100mm stop ruler and galvanized rollers, load capacity 230 kg, diameter 60 mm, distance 250 mm, right of the saw, price per meter Note: The stop must be ordered separately. 1 m and 2 m long roller conveyors can be retrofitted. Include: - Pneumatically pivoting stop with 200 mm length - new exhibition machine - Bsdsvtrkijpfx Adyjwr

Condition: good (used), Year of construction: 1997, Storti Multibi 18 Bedpfx Adsziavbeyewr 180mm cutting height Double shaft 2 x 45kW

Condition: excellent (used), RAIMANN KD31 double-shaft multi-saw - after the technical review - German production - year of production 1988 TECHNICAL PARAMETERS: cutting width 340 mm cutting height 200 mm material width max. 800 mm engine power 2 x 55 kW feed speed smoothly regulated on the inverter Bwedpfx Asg Db U Ajdysr disc diameter max. 350 mm lower shaft 400 mm upper shaft spindle diameter 65 mm sleeve diameter 80 mm four rows of pawls four upper pressure rollers electric height adjustment the ability to work independently with each spindle ruler central lubrication caterpillar with nails table top height from the base 930 mm spigot diameter 200 mm transport dimensions (length / width / height) 320/200/240 cm weight ~ 5000 kg

Condition: used, functionality: fully functional, type of input current: three-phase, cutting height (max.): 170 mm, cutting width (max.): 380 mm, working height: 170 mm, – Italian manufacture TECHNICAL SPECIFICATIONS: – cutting width: 380 mm – cutting height: 170 mm – motors: 2 x 55 kW – feed motor: 3 kW Bwjdpsw H R R Hefx Adysr – height adjustment motor: 1.1 kW – max. blade diameter: 350 mm – spindle diameter: 2 x 60 mm – sleeve diameter: 2 x 80 mm – track width: 350 mm – total power: 114.1 kW – feed speed adjustment via frequency inverter – automatic central lubrication – minimum workpiece length: 800 mm – electric height adjustment – shaft height adjustment – six top pressure rollers – pneumatic hold-downs – five anti-kickback devices – powered lower outfeed roller – connector diameter: 2 x 200 mm – spindle speed: 4500 RPM – machine dimensions (L/W/H): 300 / 220 / 190 cm – weight: approx. 5000 kg

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm Bwodoq Ii Dlepfx Adyer linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: used, TECHNICAL SPECIFICATIONS: – Length of feed rollers: 7800 mm Bodpfx Adsymd I Dsyjwr – Roller width: 1430 mm – Roller diameter: 110 mm – Destacking system – Stacker width: 1540 mm – Package depth: 1430 mm – Package height: 1830 mm – Element collection with chains: 1600 mm x 1600 mm – Return of crossbars via belt conveyor: 3000 mm – Crossbar stacking up to 1370 mm at lifting height 1700 mm – Total length: 12 m

Condition: new, Year of construction: 2026, machine/vehicle number: K00627, functionality: fully functional, operating hours: 2 h, power: 1.8 kW (2.45 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 240 mm, cutting width (max.): 450 mm, control type: manual, pivoting range: 45,060 °, actuation type: manual, total height: 1,300 mm, total length: 2,000 mm, total width: 850 mm, Equipment: CE marking, documentation/manual, The S 320 DG from Sägemaschinenfabrik Bauer GmbH is a powerful double-miter band saw designed for demanding applications in metal construction, mechanical engineering, steel construction, as well as in locksmith shops and manufacturing companies. Thanks to its robust industrial design, high cutting accuracy, and well-thought-out construction, it is ideally suited for economical and precise cutting operations in daily continuous use. Bwedpfszqdmmjx Adyor With a generous cutting capacity of Ø 320 mm for round stock or 450 x 230 mm at 90°, the S 320 DG offers high flexibility for a wide range of workpieces and material cross-sections. Miter cuts from 45° to the left to 60° to the right enable versatile applications in the cutting of profiles, pipes, and solid materials.

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Motor: 400 V / 5.0 kW Speed: 2800 rpm Cutting length: 420 mm Cutting width: 420 mm at 90° 295 mm at 45° Cutting height: 200 mm at 90° 140 mm at 45° The saw can be tilted to an acute angle of approximately 25° on one side and tilted flat to the left up to 30°. Saw blade diameter: 520 mm x 50 mm Dust extraction port diameter: 100 mm Weight: 250 kg Bwodekwhmfopfx Adysr With the following optional equipment: - Carbide-tipped circular saw blade 520x4.0/2.8 x 50, 60 teeth, for wood - Machine can be tilted on both sides from the front using a hand crank Availability: short notice / 2022 Location: Solingen

Condition: used, Präzision Kapp- und Gehrungssäge  / Precision Miter Saw OMGA T55 300 Baujahr / Year ca. 2009 mit Absaugung / with suction Sägeblattdurchmesser / Saw blade Diameter 300mm Schnittbreite / Cutting width max. 90° 135 mm Schnittbreite / Cutting width max. auf 45° 90 mm Schnitthöhe / Cutting high  max. 98 mm Festpunkte bei / Fixed Points on a 45°- 30° - 22°30' - 15° - 10° rechts und links Sehr guter Zustand / Very good condition Verstellbare Präzisionskapp- und Gehrungssäge mit Drehtisch, selbstzentrierender Blockierung in den Hauptwinkeln 45°, 30°, 22°30’, 15°, 10° und 0° rechts und links, manueller Blockierung der Zwischenwinkel, Winkelablesung von Gradskala. Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Bwedpfx Adoxvh E Royjr

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, power: 2 kW (2.72 HP), saw blade diameter: 350 mm, Radial arm saw Graule for long cuts This machine can cut 90° only !!! Length of cut : 430 mm Depth of cut : 135 mm Sawblade-Ø : 350 mm Bwodpfxsy Dgdks Adyer Suction plant-Ø : 100 mm

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 20303, cutting length (max.): 4,500 mm, saw blade diameter: 500 mm, pressure: 7 bar, Tilting range pneumatically from 90° to 45° Bwedey Ah Hkopfx Adyjr Saw blade diameter 500 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Power output 4 kW Compressed air supply 7 bar Air consumption per working cycle 20 l without spraying, 32 l with spraying Ideal machine for high-volume series production when cutting at 90° and 45° Vertical pneumatic material clamping unit Machine is prepared for operation We can offer professional assembly

Condition: good (used), Code: 0390 Brand: OMS SALVARANI Model: FC 350 R - CE Standard Crosscutting machine with base frame for wood, aluminium, PVC, plastic, etc. - CE Standard Technical data Blade diameter mm 350 Three-phase motor Watt 2800 - Rpm 3000 Cutting capacity height mm 145 Cutting capacity width at 45 degrees mm 113 Cutting capacity width at 90 degrees mm 160 Base complete with suction Bjdpfsy Tk I Sex Adyewr Overall dimensions mm 800 x 600 x 1500 h Weight kg 110

Condition: good (used), Code: 0246 Brand: OMGA Bjdsxztydspfx Adyswr Model: TR 2B - NC - CE Standard Automatic double mitre saw with numerically controlled positioner for cutting frames, wood profiles, furniture, wooden window frames, doors, plastic materials, and various - CE standard Technical data: Numerically controlled positioner: allows cutting lists to be stored and the moving head to be positioned automatically Cutting length 3500 mm Blade diameter 350 F 30 mm Motors each 2,2 Kw Rpm 3000 Cutting width 170 mm Cutting height at 90° 102 mm N° 2 vertical pneumatic pressers Suction mouth diameter 80 mm Compressed air 6-7 bar Overall dimensions mm 4400 x 1000 x 1500 h Weight kg 600

Condition: good (used), Code: 0370 Brand: HAFFNER - GERMANY Model: DGS 187 - CE Standard Double mitre saw with tilting blades for cutting wood, aluminum, pvc and various materials - CE Standard Technical data: Blades diameter mm 500 F 30 N° 2 motors each Kw 2,2 - Rpm 2800 Cutting length max mm 3400 Cutting length min mm 230 Blades inclination 45° - 90° Bsdpouiwqhefx Adyjwr Electronic positioning cutting length of left cutting unit Hydropneumatic saw feed Pneumatic workpiece clamping Control panel double buttons Electronic head positioning programmer N° 2 suction ports diameter mm 120 Compressed air 6 bar Overall dimensions mm 4600 x 1300 x 1650 h Weight kg 550

Condition: good (used), Code: 0323 Brand: SML - ITALY Model: SILVER P 35/EL - CE Standard Electronic double mitre saw for cutting wood, frames, pvc, aluminium, plastics and various materials - CE Standard Technical data: Oleo-pneumatic head lowering Max cutting length mm 5200 Bodpfxotu Hy Ee Adyowr Min cutting length mm 50 Cutting height mm 100 Max cutting width mm 170 Blade diameter mm 350 F30 Motor Hp 3 each - Rpm 3000 Electronic head positioning programmer Bimanual blade lowering control Pneumatic pressures for workpiece clamping N° 2 suction ports diameter mm 60 Working pressure 7 bar Overall dimensions mm 6300 x 1000 x 1600 h Weight kg 1100

Condition: ready for operation (used), A Schüco double miter saw for cutting aluminum and light metal profiles is available. Working length: 6000mm, saw units: 2, max. profile cross section X/Y: 150mm/100mm, min. cutting length: 400mm, speed: 2800rpm, cutting angle range: 45°-90°, saw blade diameter: 400mm. Documentation available. An on site inspection is possible. Bedszl U Hyjpfx Adyewr

Year of construction: 2020, condition: new, Double-sided miter stop Year of manufacture: 2020 For the quick and stepless production of miter cuts on narrow and short workpieces at any angle from 0° to 90° Bwsdpfx Adokwhalsyer For cutting to a length of up to 1375 mm Easy to handle and quick to mount on the saw’s roller carriage Suitable for Panhans models 680_10_20 Conversion kit for other models available upon request Availability: short-term Location: Hochheim

Condition: reconditioned (used), functionality: fully functional, Power connection: 230V, 1.5kW Current consumption in operation: 5.5A Bodpfoyypfpox Adyjwr Cutting height approx. 80 mm Cutting length 150 mm Dimensions (W x H x D): 500 x 570 x 750 mm Weight approx. 50 kg Handwheel height adjustment Swivels right/left 45° Tiltable 45°