Used Double Mitre Saw for sale (18,058)

Condition: good (used), Year of construction: 1990, machine/vehicle number: 110693, Offer 20507 Technical data: - Saw blade dimensions 350 x 3.2 x 40 mm - Saw blade speed 3200 rpm - Cutting range at 90° 115 mm - 115 x 120 mm - 200 x 80 mm - Miter adjustable left + right - Drive 400 V / 2.0 kW - Pneumatic connection 6 bar Gjdpforkmkcsx Ag Nokc - Space requirement approx. W 700 x H 1500 x D 900 mm - Machine weight approx. 80 kg - with: - Saw blade - clamping vice - Micro-spray lubricant device - Stop rail 3000 mm

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, The Autobyte 3602D is an automated cutting system equipped with premium Morso guillotine blades for perfect corners in wood, plastic, and MDF. With a capacity of over 500 frames per hour, material savings are achieved thanks to the minimal saw kerf of just 1 mm (as opposed to 6 mm with conventional saws). The automatic material feeder accommodates up to 13 lengths, clamps ensure secure holding, and a splitter sorts cut pieces while removing waste. Control is via Mitsubishi touchscreen and PLC, with pneumatics supplied by SMC. Gsdew U D E Eepfx Ag Nokc

Condition: used, machine/vehicle number: 8354, disk of circular saw-Ø: 350 mm cutting area at 90° round: 90 mm Gkodpfoby Hikjx Ag Nec cutting area at 90° square: 160 x 70 mm cutting area in mitre at 45° square: 120 x 60 / 60 x 80 mm cutting speed: 30 m/min engine: 1,1 kW space needed: 1000 x 1250 x 1380 mm

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, CATALOG NUMBER 7563 Technical data: - Track width: 340 mm - Shaft width: 360 mm - Disc bore diameter: 70 mm - Max. disc diameter: 315 mm - Max. cutting height: 180 mm * from above - Pulling shaft, toothed, pneumatically pressed - 2 rows of kickback guards - 3 pressure rollers, sliding, smooth - Kickback guards - Shaft with sawblades - 3 sliding, smooth pressure rollers - Kickback guards * from below - Infeed pulling shaft, toothed - Track - Shaft with sawblades - Track - Stepless feed speed adjustment via frequency inverter - Main motor: 2x55 kW - Feed motor: 4 kW - Electric raising/lowering of upper body - Electric adjustment of shafts with sawblades - Central lubrication - Extraction nozzle diameter: 2x150 mm - Dimensions (L/W/H): 2800x2400x1900 mm - Weight: approx. 5000 kg ADVANTAGES – Italian production – Two-shaft design – Ideal for large workpieces – Used multi-blade saw, in very good condition Net price: 145,900 PLN Net price: 34,000 EUR exchange rate 4.25 EUR (Prices may change in case of higher fluctuations) Gkedpfx Agev Ed Uwj Nec

Condition: good (used), Year of construction: 2003, functionality: fully functional, Specifications: Cutting speed, infinitely variable: 20 - 90 m/min Saw band: 3850 x 27 x 0.9 mm Cutting range: rectangular 90°: 360 x 305 mm rectangular 45°: 265 x 300 mm Gedpfjxbrq Uex Ag Njkc rectangular 30°: 175 x 300 mm

Condition: new, Cutting range: round 0°: 270 mm square 0°: 260 x 260 mm flat 0°: 320 x 260 mm round 45° R: 230 mm square 45° R: 220 x 220 mm flat 45° R: 230 x 150 mm round 60° R: 140 mm square 60° R: 140 x 140 mm Gksdpjiqt Rlefx Ag Njc round 45° L: 200 mm square 45° L: 175 x 175 mm flat 45° L: 220 x 150 mm Cutting speed: 40 / 80 m/min Saw blade: 2925 x 27 x 0.9 mm Working height: 975 mm Coolant pump: 100 W Saw motor: 1.9 kW Voltage: 400 V Dimensions LxWxH, approx.: 2000 x 1300 x 2000 mm Weight, approx.: 550 kg Features: - Double mitre saw with swivel saw arm from left -45° to right +60° - Ideal for cutting pipes, profile material and solid material made of VA, iron, etc. in commercial applications - Generously dimensioned cast saw arm for low-vibration work - With 2 saw blade speeds for optimum adaptation to the workpiece - Hydraulic lowering cylinder - Quick-clamping vice for quick and easy workpiece clamping - Precise, adjustable saw blade guide for optimum cutting results - CE/IEC, German documentation and German service Scope of delivery: - BiMetal band saw blade 2925 x 27 x 0.9 mm - Band tension adjustable via pressure gauge - Carbide guides - Quick-clamping vice - Material stop - Coolant device with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic switch-off at the end of the cut - Underframe

Condition: good (used), Year of construction: 2010, machine/vehicle number: F3554, Offer 25228 Hydraulic Horizontal – Two-column Guided Mitre Band Saw Machine Technical Data: - Automatic operation cycle for cutting process, hydraulic lifting/lowering of the saw frame, hydraulic automatic material feed - Saw blade dimensions: 4400 x 34 x 0.9 mm - Infinitely variable cutting speed: 15 – 88 m/min - Infinitely variable cutting pressure adjustment: 10 – 15 bar Gedpfjwvrviox Ag Nekc - Lowering speed: 0 – 300 m/min - Cutting range 90°: - Round at 90°: 360 mm - Square-flat: 360 x 430 mm - Hydraulic material clamping - Hydraulic automatic material feed - Coolant system - Drive: 400 V / 3 kW - Space requirement approx.: W 2200 x H 1850 x D 1300 mm - Weight approx.: 1100 kg - Roller table: 2000 mm

Condition: good (used), Year of construction: 2001, functionality: fully functional, cutting height (max.): 100 mm, cutting length (max.): 2,500 mm, saw blade diameter: 400 mm, Double cross-cut saw EIMA type 131 with 3 saw blades, electrically adjustable Gkjdpfswnfc Hox Ag Njc

Condition: ready for operation (used), functionality: fully functional, Crosscut Saw / Mitre Saw / Crown Moulding Saw Manufacturer: Hüllhorst Model: KLS Swiveling crosscut saw, previously used for profile strips and crown mouldings. Maximum infeed length: approx. 4,000 mm Outfeed table length: 3,000 mm Maximum cutting cross-section: approx. 160 x 110 mm (W x H) Infinitely adjustable swiveling range, +/-45 degrees Saw motor: 4.4 kW Speed: 120 – 4,200 rpm Maximum positioning speed: approx. 60 m/min 2 x 80 mm extraction ports Gksdpfoxbnqdox Ag Nsc Control: Ferrocontrol Cutting accuracy: +/- 0.1 mm Dimensions: approx. 9,000 x 1,300 x 1,500 mm (L x W x H) Machine fully checked and cleaned. Among other things, a frequency inverter and a control unit have been replaced.

Condition: excellent (used), CATALOG NUMBER 7044 Gksdpfx Aomih Sfsg Nsc TECHNICAL DATA - Circular saw blade diameter: 250 mm - Blade bore diameter: 30 mm - Number of saw blades: 2 pcs - Minimum cutting width: 30 mm - Maximum cutting width: 150 mm - Maximum cutting height: 35 mm - Minimum raw material length: 620 mm - Top: 4 sliding rollers - Upper rollers act as material pressers - Bottom: pulling chain - At the outlet: metal sliding rollers at the top and bottom, 1 pc each - Stepless feed speed adjustment - Feed motor: 0.75 kW - Main motor: 4 kW - Extraction port diameter: 130 mm - Infeed table dimensions (L/W): 1550x350 mm - Total outlet chute dimensions (L/W/H): 3150x700x870 mm - Total machine dimensions (L/W/H): 2150x950x2050 mm - Total weight: 350 kg – Condition: very good, – used saw Net price: 7,900 PLN Net price: 1,860 EUR Net price calculated according to exchange rate 4.25 PLN/EUR (In case of significant exchange rate fluctuations, price may change)

Condition: good (used), Duplex DD double mitre fence for Altendorf panel saws Modified for use on Altendorf panel saws with steel guide rail, from approx. year 1998 onwards. Cross-cutting up to approx. 1400 mm Digital display of angle and cutting length with automatic angle compensation eliminates the need for test cuts. The protective film shows minor damages that do not affect functionality or operation. Gkedpfx Agew Nxu Dj Njc Machine demonstrations can be arranged by appointment at our premises. We only offer machines that are ready for demonstration and in stock, see 'further offers from this supplier.'

Condition: new, Ideal for machining pipes, profiles, and solid materials made of stainless steel, iron, etc. in industrial applications. Technical Data: Cutting Capacity: Round 0°: 235 mm Square 0°: 200 x 200 mm Flat 0°: 280 x 190 mm Round 45° right: 190 mm Square 45° right: 170 x 170 mm Gjdpfx Agsqbr Suo Nskc Flat 45° right: 190 x 180 mm Round 60°: 120 mm Square 60°: 120 x 120 mm Flat 60°: 120 x 115 mm Round 45° left: 175 mm Square 45° left: 145 x 145 mm Stepless cutting speed: 20 - 90 m/min Saw blade: 2645 x 27 x 0.9 mm Working height, approx.: 990 mm Coolant pump: 100 W Saw motor: 1.5 kW Electrical connection: 230 V Dimensions (LxWxH), approx.: 1600 x 1100 x 1500 mm Weight, approx.: 295 kg Features: - Double mitre saw with pivoting saw frame from left -45° to right +60° - Generously dimensioned cast saw arm for low-vibration operation - Infinitely variable saw speed for optimum adjustment to the workpiece - Hydraulic lowering cylinder, infinitely adjustable - Quick-release vice for easy and fast workpiece clamping - Precise, adjustable saw band guides for optimal cutting results - CE/IEC compliant, German documentation and German service Scope of delivery: - Bi-metal saw blade - Blade tension adjustable via manometer - Carbide blade guides - Quick-release vice - Material stop - Coolant system incl. pump - Hydraulic lowering cylinder - Motor protection switch - Automatic shut-off at end of cut - Base frame

Condition: excellent (used), Double mitre saw ALFAMACCHINE T350 CE Double saw for cutting at 45-degree angles Blade diameter: 350 mm Blade bore diameter: 30 mm Blade speed: 3000 rpm Motors: 2×1.5 kW Air requirement: 5-7 bar Cutting width: 15-80 mm Gkodpfx Agjxg Hx Ds Nsc Cutting height: 10-80 mm

Condition: reconditioned (used), functionality: fully functional, Usable cutting length 4000 mm Blade diameter 500 mm Gedpfxewwm Ezs Ag Nokc Pneumatic head tilting 90°/45°-22.5° Probe

Condition: used, Double edger / Edger line / Multi-blade circular saw Wurster & Dietz LB 12 0-line left Right-hand machine (adjustable saw blade right) max. pass-through height: 100 mm max. pass-through width: 65 mm with 5-strand cross conveyor as feed with 2 crosscut saws Gkodpfsxhbxnjx Ag Njc with roller infeed table with laser with lath head with chip separator with spiral roller conveyor (length: 9 meters) with discharge table (cross conveyor 5-strand) (length: 5.2 m, width: 2.2 m) Location: Austria, near Ried im Innkreis

Condition: excellent (used), CATALOGUE NUMBER 7065 Gjdpfx Agemv E Hxj Nskc TECHNICAL DATA - max disc diameter 300 mm - spindle diameter 30 mm - blade covers 2 pcs - pneumatic cutting (disc movement up/down) - saw units adjustable at a 45° angle - manual spacing adjustment of saw units - min cutting length at 90° 220 mm - max cutting length at 90° 2820 mm - cutting width 110 mm - cutting height at 90° 90 mm - pneumatic clamps 2 pcs - control foot pedal - material support - main motor 2×1.6 kW - dimensions L/W/H 3620x1100x1250 mm - weight approx. 500 kg – unpainted – tilting saw units – used saw, very good condition Net price: 13,900 PLN Net price: 3,300 EUR depending on the EUR/PLN exchange rate 4.25 (Prices may change with significant fluctuations)

Condition: used, Year of construction: 1996, weight of the machine ca. ca. 1500 kg 1707 connected load frequency 400 V 230 V frequency 50 Hz generator - rated current 8 A output 4 kw saw-blade dia. 400 mm Gedpfeupmv Ujx Ag Nokc ja

Condition: used, Miter cold circular saw KALTENBACH type KKS 400 NA Machine. No. 101701 Year of construction 1983 saw blade diameter 400 mm cutting range at 90° round Ø 130 mm sawing range at 90° square 120 x 120 mm sawing range at 90° rectangle 305 x 20 mm Cutting range at 45° round Ø 130 mm Sawing area at 45° square 110 x 110 mm Cutting range at 45° rectangle 245 x 30 mm Clamping range of collet feed 30 to 140 mm Working height 1000 mm miter cut 0 - 180 feed path 600 mm Saw blade speed 10 + 20 m/min. 2 steps motor power 1,7 and 2,6 kW hydraulic motor 1,5 kW Mains connection 380 Volt, 50 Hz - Hydraulic material clamp feed with infeed roller conveyor left 1500 mm Godpfxsd N H A Nj Ag Nekc - Feed path via double feed up to 1200 mm (2x feed, then sawing) - Hydraulic material clamping with vertical clamping cylinder - miter cut - saw angle with manual adjustment - hydraulic feed control, cutting speed manually adjustable - 2 motor speeds for the saw blade speed - saw blade stroke steplessly adjustable - coolant unit with electric pump in the machine base - Hydraulic unit fixed to the basic machine - Parts counter with zero cut-off space requirement of the saw 2600 x 1200 x 1900 mm weight of the saw approx. 1400 kg good condition

Condition: excellent (used), Double miter saw Pertici Haffner DGS180 Cutting length: 3300 mm Cutting width: 140 mm Two adjustable cutting angles Maximum saw blade diameter: 330 mm Pneumatic material clamps Gedpsxg Hanofx Ag Nekc 3 operating modes

Condition: excellent (used), functionality: fully functional, Usable cutting length 4000 mm Blade diameter 500 mm Gjdpfxexga Hzj Ag Nskc Electronic tilt of the heads Internal/external tilt from 22°30′ to 135° Internal/external tilt Gauge

Condition: new, 1 brand new semi-automatic horizontal band saw machine with double mitre Make: HUVEMA / Beka-Mak, Origin Türkiye Model: HU 230 DGH-4 / BMSY 230 DGH Technical data: Cutting range: Round 230 mm Rectangle 320 x 130 mm Square 230 mm Gsdpfsvyidmjx Ag Nskc -45 ° Round 180 mm -45 ° Flat 230 x 100 mm -45 ° Square 150 mm +45 ° Round 210 mm +45 ° Flat 230 x 160 mm +45 ° Square 180 mm +60 ° Round 120 mm +60 ° Flat 120 x 100 mm +60 ° Square 100 mm Working height 795 mm Main drive motor power 1.0 - 1.3 kW, 400 V, 50 Hz Motor power coolant pump 0.12 kW 2 speeds 35 / 70 m/min Saw blade dimensions 2730 x 27 x 0.9 mm Dimensions L x W x H 1350 x 700 x 1300 mm Weight 415 kg Accessories / Special features: • Semi-automatic operation • Hydraulically clamping vice via foot pedal • Mitering on both sides using a swivel frame o The material to be sawn remains straight in space! o No turning of the material during miter cuts! o High efficiency with enormous time savings! • Preset precision stops 0°, 45° and 60° left and 45° right • Replaceable work table • Hydraulic vice, can be moved sideways to the left and right • Adjustable length stop 500 mm for cuts of the same length • The lowering of the saw arm is continuously regulated by a hydraulic cycle, after sawing the arm moves back up automatically and the vice opens • Coolant system • Chip brush • Pivoting control panel • Electric safety switch for blade tension and saw blade cover • Emergency stop switch • CE-compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Year of construction: 2005, operating hours: 1,000 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 401, This machine has got very little use as it was used as a backup saw. It has been taken out of the production line as we needed the space for a new Schirmer machining center. This Rapid DGL functions as new and is ready for shipment if sold. We have the necessary equipment required to load onto a truck if required. Gsdpfx Ajwgygwog Nskc

Condition: used, Mitre circular saw BERG & SCHMID type MKS 350 Year of construction approx. 1980 Sawing range at 90° round Ø 110 mm Sawing range for 90° rectangle 160 x 90 mm Gsdpfx Asquzd Reg Nekc Sawing range for 90° square 95 x 95 mm Sawing area at 45° round Ø 95 mm Sawing area for 45° rectangle 120 x 90 mm Sawing area at 45° square 80 x 80 mm Saw blade diameter max. 350 mm Saw blade speed 28 and 56 rpm Motor power approx. 1.8 / 2.5 kW pole-changing Mains connection 380 Volt, 50 Hz - Motor with 2 electrically switchable speeds - Infinitely variable mitre quick adjustment up to 45° - Material vice with quick-release eccentric lever - Coolant device with electric coolant pump - material stop 350 mm - Saw blade with Ø 335 mm installed Space requirement L x W x H 1250 x 600 x 1200 mm Weight 240 kg good condition

Condition: used, Mitre Cutting Saw System for Steel Construction Column-Guided Mitre Bandsaw Semi-Automatic PEHAKA Type HS 620 / 1000 GBS Machine No. 39093 Year of manufacture: 1995 / Electrically overhauled in 2011 Cutting range round at 45-90° Ø 650 mm Cutting range flat at 90° 1010 x 650 mm Cutting range flat at 75° left 950 x 650 mm Cutting range flat at 60° left 830 x 650 mm Cutting range flat at 45° left 650 x 650 mm Cutting range flat at 30° left 410 x 650 mm Cutting range flat at 75° right 950 x 650 mm Cutting range flat at 60° right 830 x 650 mm Cutting range flat at 45° right 650 x 650 mm Saw blade dimensions 10480 x 54 x 1.6 mm Saw blade speed 14-160 m/min, stepless Minimum remnant length / clamping length 80 mm Vise clamping range 0-1010 mm Material infeed height 840 mm Hydraulic drive power approx. 2.2 kW Saw motor drive power 5.5 and 7.8 kW (pole-switchable) Mains connection 400 Volt, 50 Hz, approx. 15 kW - CNC control SIEMENS S7 with touch panel, electrically overhauled in 2011 - Saw blade speed via 2-stage drive motor and stepless speed adjustment Gkodpott Uffjfx Ag Noc - Fully hydraulic bandsaw in twin-column design - Hydraulic lowering of saw frame with stepless cutting pressure adjustment - Lowering speed infinitely adjustable - Mitre adjustment via motor-driven swiveling saw unit, setpoint angle input via control system and actual value digital display - Working height sensor for increased lowering speed before saw engagement - Hydraulic double vise clamping - Hydraulic unit mounted to saw frame - Motor-driven saw blade cleaning brush Ø 80 mm - Powered material feed rollers on infeed and outfeed sides with geared motor - Coolant system with coolant pump for water-emulsion (not used) - Minimum quantity lubrication for the saw blade - Chip conveyor with motor drive integrated in machine bed - Controlled length stop up to 9000 mm with motorized swivel-up material stop Stop overall length approx. 9700 mm, stop travel path 9000 mm - Infeed roller conveyor with powered rollers, 15.5 meters, roller width 1000 mm, total width 1500 mm 20 rollers Ø 90 mm, rollers powered by geared motor, construction height 840 mm, load capacity 400 kg/m - Outfeed roller conveyor 10 meters, roller width 1000 mm, 15 rollers Ø 90 mm, construction height 840 mm, with cross conveyor Space requirement for saw system (L x W) approx. 27 x 6 meters Transport space requirements for saw unit (L x W x H) approx. 560 x 300 x 330 cm Weight of saw unit approx. 9 tons Transport space for infeed roller conveyor: length 13.5 meters x width 3 meters x height 140 cm Weight of infeed roller conveyor approx. 8 tons (transported in one piece with 2x support beams for stabilization) Transport space for stop roller conveyor: length 10.5 meters x width 3 meters x height 200 cm (6 cross conveyors are separated at 3-meter width) Weight of stop roller conveyor approx. 8 tons (transported in one piece with 2x support beams for stabilization) Good condition

Condition: used, Miter cross-cut saw for aluminum (special machine construction with 4 servo motors) Gsdpodzp T Defx Ag Nskc Circular saw, miter saw, rip saw year of construction 2002 Saw blade diameter 500 mm Sawing range at 90° round Ø 180 Rectangle 350 x 140 mm (through longitudinal cut) Sawing range at 45° round Ø 180 Rectangle 350 x 100 mm (through longitudinal cut) Guide length of base support 1100 mm Travel on the base support (forwards and backwards) 650 mm Travel on the stand (up-down) 120 mm Saw blade speed approx. 3000 rpm Motor power 2.2 kW Mains connection 400 Volt, 50 Hz - Controlled longitudinal cutting movement - Controlled saw blade height adjustment - Controlled mitre cut through swivelling saw unit - Controlled miter cut by tilting saw unit - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gears (MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN motor) - Vertical axis movement via INDRAMAT servomotors and ball screws (MKDO41B-144-KP1-KN motor) - a total of 4 Indramat servomotors are installed - very good German mechanical engineering Space requirement L x W x H 1150 x 1100 x 1400 mm weight approx. 360 kg good condition The unit comes from a special machine for special products. All other components and electrical parts for the construction of a new special machine are also available.